I want to select the last 3 characters from a field that have different character lenghts. How would you be able to do this.
For example:
pfw510s9055
70125033
efw674s8002
I only want the last 3 characte from each of these items.
Any help would be appreciated.
Hello Everyone,
I am trying to select the last 3 characters from a string. I am running into problems because the sting that I am selecting from are not the same amout of characters.
For example:
Item
abc145264
efg1254
wqx21456
How would I be able to select the last three characters from a list that could have more than 50 variations on the number of characters.
I tryed right(item, 3) but that does not work because all the lenghts are different. Any ideas?
I have a table of data with lines of various lengths. An example is
A Smith - Give #12345# Sydney City
B Jones and S Jones - Give #876543# Washington
I am trying to work out how to create a new column with just the number between the # symbols. The number would be between 5 and 9 numbers.
I have to select rows from a table
if the first 2 characters of a 12 char column are
'GB'
Select BFKEYC from table where
I have a hokey way of doing it but it looks embarrassing:
BFKEYC GT 'GA9999999999'
AND BFKEYC LT 'GC'
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like:
[AddressID] [int]
[LocationID] [int]
[Type] [nvarchar](10)
[Address] [varchar](50)
[City] [varchar](50)
[State] [char](2)
[Zip] [varchar](5)
[AddDate] [datetime]
[EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.
So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
Thank you in advance for any and all replies...
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message.
How can I store over 16000 characters to sql table field (only one field) with language specific characters?
Thanks
Hi everybody,
I would like to know if there is any property in sql2000 database to separate lowercase characters from uppercase characters. I mean not to take the values €˜child€™ and €˜Child€™ as to be the same. We are transferring our ingres database into sqlserver. In ingres we have these values but we consider them as different values. Can we have it in sqlserver too?
Hellen
Good day experts,
I wonder if i got an answer for this.
How can i iliminate a letters from a set of integers and characters using a SQL Statement
for ex:
ABC9800468F
is that possible?
is there a function that i can use to iliminate them?
I’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
A colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
Can anyone explain why?
Thanks
-Jamie
Hi,
I am trying to select all entries from a database apart from the top/latest entry, via a stored procedure.
Below is the code that i have but i am doing it wrong somehow.
Any ideas?
Thanks
CREATE PROCEDURE spNEWSARCHIVE AS
SELECT *
FROM tblNEWS
WHERE NewsID NOT TOP 1
ORDER BY NewsID DESC
GO
Hi,I have the following set and would like to select all rows that havemin value of column 4 for a given column 1 and 2 group, irrespective ofcolumn 3, as below:C1 C2 C3 C4---------------------A B x 5A B y 10A BB XX 55A BB YY 11AA CC z 1AA CC zz 11Need---A B x 5A BB YY 11AA CC z 1using sql server 2000 (which does not provide rank or partition by)Thanks in advance,Tamas
View 2 Replies View RelatedHello!
We are trying to build a FAQ in a SQL database that will be updateble trough the web.
Now to the questione:
We can't use more than 255 characters, in Books Online it says that char and varchar supports 1 to 8000 characters but it doesn't work for us.
Anyone knows why?
I have a column with data type of text.
Some values are 5 digits long, and other characters are 6 digits long.
I want to write a query that adds a '0' to the end of the values that only have 5 digits...
How would my syntax look like ?
thank you
I have a field oh phone numbers that had no specific format. I have removed all of the previous formatting so know there are just a string of 10 numbers and I want them all to change to "(###) ###-####". Is there an SQL statement that I can use to update the field in a batch process. Any help would be great. I also have linked the tables to an access db, if that makes it easier. Any help is much appreciated.
Thanks
Hello,I have a gridview bound to a sqldatasource control. I have an emptydatatemplate setup. In the selecting event, I make sure that an actual select has been performed (and not on null data); however, I have cancelselectonnullparameters set to true to stop it, because initially it will be null.However, the selecting event runs, even when I cancel it, the emptydatatemplate shows up. How do I prevent that from occuring?
View 2 Replies View RelatedHi Folks,
You can select all fields with:SELECT * FROM [TableName]
How do you select NOTHING or NONE with a SELECT statement?
Thanks
Dear All,
I need to select records between two datetimes.
My Database Structure and sample values are as below
Fromdate ToDate
2007-02-20 09:00:00.000 2007-02-20 12:00:00.0002007-02-20 08:00:00.000 2007-02-20 12:00:00.0002007-02-20 06:00:00.000 2007-02-20 13:00:00.000
Query i used
select * from tablename where ((fromdate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)) or (todate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)))
My query is not returning values when i am querying between '2007-19-2 10:00' and '2007-19-2 11:00'
Please help
Thanks
Hi, This is quite an obvious problem, but for some reason I can't think through the solution. I have two columns, a datetime (datecreated) and an id (FK) othertableid (id)what I would like to be able to do is select a list of id and datecreated, but only chose the latest row for each id.So I guess it's a bit like a distinct on the id column, but ensuring the date returned is the top date. Please help
View 1 Replies View RelatedHi i was wanting to know how to select a record in a gridview. I have a gridview with firsname and lastname. I currently have select command on it but don't want it. I want to be able to select first name or last name and have it take me to that record on the database.
View 3 Replies View Relatedhello all,
i have a nested gridview. how do i add a SELECTING event for this datasource for my inner gridview? because i need to increase the commandtimeout. thnx.
private SqlDataSource ChildDataSource(string strCustno) { string strQRY = "Select ..."; SqlDataSource dsTemp = new SqlDataSource(); dsTemp.ConnectionString = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString ; dsTemp.SelectCommand = strQRY; return dsTemp; }
How can I select data between Mth row and Nth row from a specific search condition? for example , I want to get the 5th to 10th employee who is born in March and ordered by their name.
View 1 Replies View RelatedHello:
I have one table and it contains a column named ID Number, and a column named Date. I have a Do While statement that runs a SQL select statement a few times based on the number of records with the same ID Number. During the Do While statement the information is copied into another table and deleted from the old table. After I look at the results, I see that at the second Do While loop, the data was not selected and the Select statement did not run... so the old variable value from varValue is used again... Any reasons on why?
Here is a code snippet of what is going on:
Do While varCount < varRecordCount
conSqlConnect.Open()
cmdSelect = New SqlCommand ("Select * From temp_records_1 where [id number]=@idnumber and date<@date", conSqlConnect)
cmdSelect.Parameters.Add( "@accountnumber", "10000" )
cmdSelect.Parameters.Add( "@date", dtnow )
dtrdatareader = cmdSelect.ExecuteReader()
While dtrdatareader.Read()
If IsDbNull(dtrdatareader("value")) = false Then
varValue = dtrdatareader("value")
End If
End While
dtrdatareader.Close()
conSqlConnect.Close()
'#####The information above is copied to another table here
'#####The record where the information was received is deleted.
varCount = varCount + 1
LoopAny ideas?
I have a tbale with maybe 30 columns and I'm selecting all where a
record number matches a parameter I've passed. That works fine,
however is there any way to do some conversions to fields when
selecting without having to list out each column? For instance
this is what it looks like now:
SELECT *
FROM Losses
WHERE @AppRecord = AppRecord
ORDER BY Record ASC
But I want to convert say one column, is there a way to keep similar syntax instead of listing out each column?
SELECT *, CONVERT(varchar(15), [Losses]) as [Losses]
FROM Losses
WHERE @AppRecord = AppRecord
ORDER BY Record ASC
And the column I'm converting is of type 'money'. I'm converting
it to get rid of the extra zeroes at the end. If you know a
better way to do it I'd be interested in knowing.
CREATE PROCEDURE {databaseOwner}{objectQualifier} [PreciseData_IssueTracker_GetAllIssues]@moduleId intASSELECT PreciseData_IssueTracker_Issue.id AS 'issueId',PreciseData_IssueTracker_Status.name AS 'statusName',PreciseData_IssueTracker_Issue.subject AS 'subject',PreciseData_IssueTracker_Type.name AS 'typeName',Users.Username AS 'assignedUserName',Users.Username AS 'raiserUserName',PreciseData_IssueTracker_Issue.raiseDate AS 'raiseDate'FROMPreciseData_IssueTracker_Issue INNER JOIN PreciseData_IssueTracker_Status ON PreciseData_IssueTracker_Issue.statusId=PreciseData_IssueTracker_Status.idINNER JOIN PreciseData_IssueTracker_Type ON PreciseData_IssueTracker_Issue.typeId=PreciseData_IssueTracker_Type.idINNER JOIN Users ON Users.UserID=PreciseData_IssueTracker_Issue.assignedUserIdINNER JOIN Users ON Users.UserID=PreciseData_IssueTracker_Issue.raiserUserIdWHERE PreciseData_IssueTracker_Issue.moduleId=@moduleIdORDER BY PreciseData_IssueTracker_Issue.raiseDate DESCGOHow do i make it work?
View 1 Replies View RelatedHi
I have a content management system that I am building. My CMS has a
pages table which contains 60 fields, some are varchars, some are ntext
some are dates etc. They have field names which match their purpose
like varchar1, ntext3 etc. These fields are used up depending on which
template is applied to the page.
The templatefields table holds holds the information about each field
in a template. It's control type (rich text control, date control etc)
and the field in the pages table that the data will be stored in
(varchar1,ntext3 etc)
What I want to be able to do is loop through the templatefeilds table
for a particular template and then using the field name for the pages
table, go to the pages table and get the value to populate the control.
So to clarify, I would like to produce a stored procedure which outputs
the page field name (varchar1) from the templatefields table and
varchar1's value in the pages table. Maybe in a temporary table.
Is this possible?
Any guidance would be appreciated..
Thanks in advance
Hi --
What is the proper way to select results with a date in the where statement when the datatype of the column is datetime?
select * from table where date_field = '3-23-2006' does not get any results.
Thank-you for your help.
how can I select 10 random rows from a table?
Please help
We are developing an Access application that will be used to run adhoc reports against a SQL Server table. Selection criteria is entered on a form, a passthru query is built on the fly, and the results are formatted for output via an Access report.
There are 16 different fields on the query form. Two are date fields (from / to), the rest are text. The user is required to supply a date range for the report. They may specify any combination of the remaining query fields.
Examples:
From/To dates, part number, work order number
From/To dates, location, operation, sales order number, operator
What is the best scheme to use for the indexes? One index for each potential query field? Or, a single index that includes ALL query fields? Or, some other combination?
I should also mention that there will be no realtime updates to the table. On a weekly basis, we will import updates from a mainframe extract (dropping the indexes prior to the import, rebuilding them afterwards).
I have a database which has a field called fldTimes. basically this field records the number of hits a file gets. How can I choose the most 5 popular files with the greatest hits. Thanks
View 2 Replies View RelatedCan anyone help me in finding out the database name?
For example, @@SERVERNAME gives you the name of the server
on which you SQL Server is running.
In the same way, is there any global variable which gives me the
name of the database in the context in which I am running my queries or stored procs?
Thanks
Sushruth Nanduri.
I have a query that returns a certain amount of results. How do I select the last row??? I know I can do the top row by doing (top 1). Basically I need the complete opposite. Please help...
I looked around and couldn't find anything on it.
thanks in advance
Hello .
Sometimes when i try to select data from a table (from a selected database)
using SQL Query Analyzer (for exemple) i receive an error message : "The Object XX does not exist" . But when i prefix it by the Owner it work .
What is the problem then ?