I have to select rows from a table
if the first 2 characters of a 12 char column are
'GB'
Select BFKEYC from table where
I have a hokey way of doing it but it looks embarrassing:
BFKEYC GT 'GA9999999999'
AND BFKEYC LT 'GC'
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
Here's my current SQL:
SELECT
RN_TEST_ID AS 'Test ID',
MAX(RN_EXECUTION_DATE) AS 'Last Execution Date',
MAX(RN_EXECUTION_TIME) AS 'Execution Time',
RN_DURATION AS 'Run Duration'
FROM RUN
[code]....
Here's a sample of data returned:
Test IDLast Execution DateExecution TimeRun Duration
86722/9/2015 0:0012:08:16180
86822/9/2015 0:0011:29:06181
86842/9/2015 0:0008:29:17119
105252/3/2015 0:0019:03:4089
105252/3/2015 0:0019:10:13305
106682/3/2015 0:0018:55:43103
106682/6/2015 0:0018:10:50123
114572/3/2015 0:0011:40:0726
What I need are two things:
1. The query should only return one record for each test id
2. The record returned should be the most recent. By most recent I mean the RN_EXECUTION_DATE and RN_EXECUTION_TIME of the returned row should be the most recent in time.
For example, in the sample data there are multiple rows with the same test id (for example 10668 and 10525. The 10525 is even more problematic since its execution date is the same for both rows returned - the execution times differ. Again, I want one record per test id and that record should be the most recent in time.
Hi there, im still learning SQL so thanks in advance.I have a table with columns of customer's information, [customerID], [customerFirst], [customerLast], , [program] ... other columns ... There will be entries where there can be duplicate customerFirst and customerLast names. I would like to just return a single entry of the duplicate names and all associated row information. IE: [customerID], [customerFirst], [customerLast], [ email], [program] 01 Bill Smith bill.smith@hotmail.com ymca 02 Bill Smith bill.smith@hotmail.com Sports 03 jon doe jon.doe@hotmail.com AAA 04 jon doe jon.doe@hotmail.com Ebay 05 Paul Sprite paul.sprite@hotmail.com Rec Desired Returned result: 01 Bill Smith bill.smith@hotmail.com ymca 03 jon doe jon.doe@hotmail.com AAA
05 Paul Sprite paul.sprite@hotmail.com Rec So in my code i have this:dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); dAdapter.Fill(pocDS, "Data Set"); However this is throwing up an error when i build the app: An expression of non-boolean type specified in a context where a condition is expected, near ')'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
An expression of non-boolean type specified in a context where a
condition is expected, near ')'.
Source Error:
Line 52: //dAdapter = new SqlDataAdapter("SELECT DISTINCT * FROM [Poc_" + suffix + "] ORDER BY [CustomerLastName]", cnStr); Line 53: dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); Line 54: dAdapter.Fill(pocDS, "Data Set");Line 55: Line 56: //Dataset for name comparison 1: Can someone explain to me why this error is happening?2: Can soemone confirm that my intentions are correct with my code?3: If I'm completely off, can someone steer me in the right direction?Thanks alot!-Terry
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
View 28 Replies View Related
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
Ideas?
Thanks,
Ad.
Part 1: When there is ~ (tilde) and has any value after it then it goes into a new row and duplicating the other columns like the facility in the screenshot attached and new column having the sequence.
Part 2: When there is ^ (Caret) its a new column irrespective of a value present or not
CREATE TABLE [dbo].[Equipment](
[EQU] [VARCHAR](50) NOT NULL,
[Notes] [TEXT] NULL,
[Facility] [VARCHAR](50) NULL)
INSERT INTO [dbo].[Equipment] ([EQU] ,[Notes] ,[Facility])
SELECT '1001','BET I^BOBBETT,DAN^1.0^REGULAR^22.09^22.090~BET II^^^REGULAR^23.56^0~','USA' union
SELECT '998','BET I^JONES, ALANA^0.50^REGULAR^22.09^11.0450~BET II^^^REGULAR^23.56^0~','Canada' UNION
select '55','BET I^SLADE,ADAM F.^1.5^REGULAR^27.65^41.475~','USA'
SELECT * FROM dbo.Equipment
I created the table in excel and attached the screenshot for a clear picture as to what is required. I use text to Columns in excel to achieve this not sure if there is anything similar in sql.
I have a report with a date type parameter. Depending on the value return by this date type parameter the dataset will return either the credit, deposit or process date. How do I go about coding it so that it will dynamically select the right column in my query for my dataset?
Sincerely appreciate all the help I can get.
Thanks in advance.
Mike writes "Hi,
I am a beginner with TSQL and I hope this is not a silly question :-)
Lets say I have a table with 2 columns, 1 a primary key identity field with increment 1 and the other a char.
EG:
ID ANIMAL
---------
1 CAT
2 DOG
3 PIG
4 RAT
5 PIG
6 DOG
7 DOG
.
.
And so on with many entries
How do I return a selection of rows that have the contents of the ANIMAL field matching 1 or more times
EG:
From above table I want to return rows 2,6 & 7 and 3 & 5 ONLY and not 1(CAT) and 4(RAT) because they only occur once.
In my real life situation I have unknown numeric data in field 2 but the principal is the same.
How do I do this?
Thanks in Advance
Mike"
I need a query to simply return rows where a column has less than 10characters (nvar).thanks.rjl
View 2 Replies View RelatedHi,
i have a table like below
table:-
id col2 col3 col4 col5 col6
1 2 3 4 5 6
2 5 8 4 7 6
3 4 8 2 6 9
4 2 5 8 6 3
5 6 9 5 5 9
i want to write a stored procedure where i pass column names a parameters and i want to get result based on that
For ex:-
if i pass the parameters as
col3 and col5 where id =1 then i should the result as
id col3 col4 col5
1 3 4 5
and if i pass input as col2and col6 where id =3, the result should be
id col2 col3 col4 col5 col6
3 4 8 2 6 9
can anyone help on this??
I am trying to write a stored procedure that will select information from a SQL table based on a specific time.
For example I have a name field and a time field, I want to return just the names that were created between a specific time frame. ex between 3pm and 4pm.
Any thoughts?
There is a table [Formula_Calc] with formula calculations that need to be replaced with relevant values based on another table [Totals]
[Totals]
RowNo|Total
F1|240
F2|160
F3|180
F11|1000
F12|1500
F13|2000
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16.
Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100);
DECLARE @Total NVARCHAR(100);
SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total)
FROM [Totals]
SET @Total='select '+@formula
EXECUTE sp_executesql @Total;
PRINT @Total;
I have a temporary table that contain 1000 rows. I want to insert records from 900 to 1000 into another temporary table. Is ther any query that will do this in SQL server. With cursors I can do that but I need one shot query. Please give me some suggestions.
I using this query but it is not returning any rows.
select * into #t2 from #t1 t1 where not exists( select top 900 * from #t1 t2)
hi!I have two tables with same structure. I need to run a select query thatwill return only the rowsfrom one table that are not in the other.In MySQL it would beselect * from table1 MINUS select * from table2.but in MsSql I can not find the apropriate way to do this.Any Help?Zvonko
View 3 Replies View RelatedHy!
I'm trying to write a query which returns only some rows in my table...
For example :
I want all the rows included between 30 and 50 from table XYZ
(30 and 50 are not keys but really the numbers of records)
Is there someone out there who has a hint for me???
Thank you for your help and sorry for my english!
RadiFluide
I need to select the last 6 rows from a table... I was doing it like this:
select * from table where id > (select max(id)-6 as id from table)
But if one of the records is deleted it will only show 5.... Is there any easy way to make it show the bottom 6 records?
much thanks sql gods...
Table 1:
AB C
114.7
214.7
314.7
Table 2:
ADE
11a1.2
11b1.8
22a2.1
22b2.3
33a0.6
I would like to filter the second table taking one row per ID of Field A (first table) and selecting the rows whose sum of E is equal to the value in field C; in this example the resulting table should be:
Table 3:
ADE
11b1.8
22b2.3
33a0.6
Total field E = value in field C = 4.7
Hi,
These aren't my tables, but lets dumb it down for my sake!
I have 2 tables:
CompanyInfo: IDNumber, EffectiveDate, CompanyName
TransacationInfo: TransactID, CompanyID, TransDate, Amount
There are several records in TransactionInfo for each record in CompanyInfo.
I want to:
SELECT CompanyInfo.IDNumber, CompanyInfo.EffectiveDate, CompanyInfo.CompanyName,
SUM(TransactionInfo.Amount)
How can I do this? Can I?
I’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
Hello,
I am unable to figure out how to proceed after trying for more than a day. Should I add a parameter to the stored proc? How do I proceed?
I need to be able to show data for EdgeID 2,3,5,6,20,21 and so on...Right now I am showing data for 1, 4, 19 and so on based on the ReltTotID based on the result set below. This is because the table that the query below is selecting from adds up all common EdgeIDs to give one row for example
EdgeID Desc TermType ReltTotID
1Global Edge Model w/ Fwd Earn II T 1
2Short Term Global Edge Model w Fwd Earn IIS 1
3Long Term Global Edge Model w Fwd Earn IIL 1
4Emerging Market Edge Model w Fwd Earn T 4
5Short Term EM Edge Model w Fwd Earn S 4
6Long Term EM Edge Model w Fwd Earn L 4
19SmallCap Edge Model w/ Fwd Earn T 19
20SmallCap Short Term Edge Model w/ Fwd EarnS 19
21SmallCap Long Term Edge Model w/ Fwd EarnL 19
35Global+EM Edge Model w Fwd Earn T 35
The final query result is :
EdgeID Description Short Desc PerID UnivID DefID
1Global Edge Global Developed 500622355938
4Emerging Market Emerging Markets 500632356039
19SmallCap Edge Small Cap Edge 500642364244
I would like it to be :
1Global Edge Global Developed 500622355938
2Short Term Global Developed NULL2355938
3Long TermGlobal Developed NULL2355938
4Emerging Market Emerging Markets 500632356039
5Short Term Emerging Markets NULL2356039
6Long Term Emerging Markets NULL2356039
19SmallCap Edge Small Cap Edge 500642364244
19Short Term Small Cap Edge NULL2364244
19Long Term Small Cap Edge NULL2364244
The stored proc query is as below:
SELECT
EdgeModelID = em.EdgeModelID
--, EdgeModelID = em.EdgeModelID
, Description = m.Description
, ShortDescription = ISNULL(emdn.ParameterValue, m.ShortDescription)
, ViewPermissionID = emdp_perm.ParameterValue
, EdgeUniverseID = univ.UniverseID
, EdgeDefinitionID = univ.MemberID
FROM OptMod..GO_EdgeModels em
JOIN OptMod..GO_Models m
ON em.EdgeModelID = m.ModelID
AND m.ModelType = 'E'
AND Status = 1
JOIN OptMod..GO_EdgeModelDisplayParameters emdp
ON emdp.EdgeModelID = em.EdgeModelID
AND emdp.ParameterName = 'NewEdge32 Screening'
LEFT JOIN OptMod..GO_EdgeModelDisplayParameters emdn
ON emdn.EdgeModelID = em.EdgeModelID
AND emdn.ParameterName = 'NewEdge32 Display Name'
LEFT JOIN OptMod..GO_ModelUniverses mu
ON em.EdgeModelID = mu.ModelID
LEFT JOIN OptMod..vUniverses univ
ON mu.UniverseID = univ.UniverseID
LEFT JOIN OptMod..GO_EdgeModelDisplayParameters emdp_perm
ON emdp_perm.EdgeModelID = em.EdgeModelID
AND emdp_perm.ParameterName = 'NewEdge32 Permissions'
WHERE em.EdgeModelID = em.RelatedTotalEdgeModelID
Thanks in advance!!!
sqlnovice123
I have a table column can save english(single byte) or chinese(double byte) char, how to distinguish the records containing chinese(double byte) char thru sql command
thx.
I have a table with two columns refid and name and it has the following values
1 tom
1 jim
2 bob
1 bob
I need a resultset that would have the following values
1 tom, jim, bob
2 bob
I have tried couple of things one being:
DECLARE @namelist VARCHAR(1000)
SELECT @namelist = COALESCE(@namelist +', ' ,'') + name FROM sales where refid = 1
SELECT @namelist
But I am looking for a resultset with a unique refid and all the names comma separated for that refid.
I need to split a row into multiple rows based on multiple column values.
time_id = 111
employee_id = 222
time_in = 10:00
time_out = 16:00
break1_in = 12:00
break1_out = 13:00
break2_in = 14:00
break2_out = 15:00
I would like to break this into multiple time_in/time_out based on if they have breaks. Breaks are not required and will come across blank if non are taken.
row 1
time_in 10:00
time_out 12:00
row 2
time_in 13:00
time_out 14:00
row 3
time_in 15:00
time_out 16:00
I want to filter out the duplicate rows based on three columns. I got this quick query from Microsoft site to filter out the duplicate rows, but I am getting the result that filters out the non-duplicate one too. Below is the query
;With Temp as (
SELECT row_number() over (partition by [id],[p_date], order by [id],[p_date],) as Row,
[code]...
In the above case id is null, but in some rows id is not null . The above is obviously not duplicate.
I have a table that holds a number of offers made to a orginization for placements at a lecture. what im wanting to do is have each of the rows for a orginization repeated so that the names of people attending can be put into the database.
The first table would looks something like this:
id___|__orginization_| lecture | offers
1 | orga | lec1 | 5
2 | orgb | lec1 | 3
3 | orga | lec2 | 3
the result im looking to get is something like this where the name of the attendess would be inputed in an application.
id | orginization | lecture | nameofattende
1 | orga | lec1 | j. blog
2 | orga | lec1 | s. smith
3 | orga | lec1 | h. samual
4 | orga | lec1 | j. sams
5 | orga | lec1 | b.j. james
6 | orgb | lec1 | m. curry
7 | orgb | lec1 | k. murry
8 | orgb | lec1 | g. hansen
Can anyone help with this
cheers
colin
Here's the my structure and data as follows
>
SELECT tranno ,mrno medrecno ,createdon,createdat,no_of_trans nooftrans
FROM mytab WHERE mrno = 'MR1514' and tranno = 1111
ORDER BY no_of_trans
tranno medrecno
createdon createdat
nooftrans
[Code] ...
Now requirement is : -
tranno medrecno
createdon createdat
nooftrans tranno medrecno
createdon createdat
nooftrans
[Code] ....
I have a query that gives me a result with a column value for example 4.
I now want to repeat this row 4 times with a new column that calculated from 1 - 4.
Or when column value is 3 I want to repeat row 3 times with new column name 1-3
--------------------------------------------------
SalesOrder-ItemName-Price-Category
-------------------------------------------------
01-Camera-100-Electronic
01-Memory-4GB-10-Memory
01-Battery-5-Battery
02-Keyboad-10-Accessories
02-Mouse-5-Accessories
03-CPU-300-Hardware
03-Motherboad-400-Hardware
From above rows i would like to select rows based on one distinct column SalesOrder, i want output like below.
-----------------------------------
SalesOrder-ItemName-Price-Category
-----------------------------------
01-Camera-100-Electronic
02-Keyboad-10-Accessories
03-CPU-300-Hardware
CREATE TABLE Table1 (SalesOrder varchar(10), ItemName VARCHAR(100), Price INT, Category VARCHAR(100))
[Code] ......
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
View 1 Replies View RelatedSqlCeParameter.Size seems to be limited to 255 characters for char types.
Eg.
SqlCeParameter param = new SqlCeParameter();
param.ParameterName = parameter_name;
param.DbType = DbType.String;
param.Size = 260;
Now check the value of param.Size, it will be 255.
In the past this problem was avoidable by setting the size to 0. However, this cause a problem if you are re-using the same command and simply changing the parameters value.
Somewhere the system remembers the length of the first value and adjusts the max size to be limited to this length.
Thus for the following values:
"Test"
"Testing"
The second one will error with something like "@param: String truncation: max = 4, len = 7, value = 'testing' "
Has anyone else come across this problem, or found a solution to it?
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale.
In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD.
That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD
That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I need a SQL Script to accomplish this. thanks
I have 2 tables with 2 fields in common between them. How do I get a count of rows in table 1 but not in table 2 matching those 2 fields? Thanks.