I have a query that include a single LEFT JOIN. I would like to be able to select at most 1 row of the second table (providing that the JOIN represents a one to many relationship).
Does anyone knows how to do that?
Thanks in advance,
Joannès
-- Why is the left table in a LEFT JOIN limited by the where clause on the right table?eg
DECLARE @LeftTable TABLE (LeftID INT NOT NULL IDENTITY(1, 1), LeftValue INT NULL)
INSERT @LeftTable (LeftValue)
VALUES (111)
INSERT @LeftTable (LeftValue)
VALUES (222)
[code]....
Anyone know why using
SELECT *
FROM a LEFT OUTER JOIN b
ON a.id = b.id
instead of
SELECT *
FROM a LEFT JOIN b
ON a.id = b.id
generates a different execution plan?
My query is more complex, but when I change "LEFT OUTER JOIN" to "LEFT JOIN" I get a different execution plan, which is absolutely baffling me! Especially considering everything I know and was able to research essentially said the "OUTER" is implied in "LEFT JOIN".
Any enlightenment is very appreciated.
Thanks
I was writing a query using both left outer join and inner join. And the query was ....
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';
The result i got was same,i.e
supplier country productid productname unitprice categorynameSupplier QOVFD Japan 9 Product AOZBW 97.00 Meat/PoultrySupplier QOVFD Japan 10 Product YHXGE 31.00 SeafoodSupplier QOVFD Japan 74 Product BKAZJ 10.00 ProduceSupplier QWUSF Japan 13 Product POXFU 6.00 SeafoodSupplier QWUSF Japan 14 Product PWCJB 23.25 ProduceSupplier QWUSF Japan 15 Product KSZOI 15.50 CondimentsSupplier XYZ Japan NULL NULL NULL NULLSupplier XYZ Japan NULL NULL NULL NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
Now I have a table with the table design as following :
table cst_EmpProfile
intEmpId nvcEmpName nvcEmpAddress intEmployeeType bitActiv
1 Peter Null Null true
2 Juli 1, xxxx 2 true
3 Sam Null Null False
table cst_EmpType
intEmpType nvcEmployeeType
1 Free Enginner
2 Manager
3 Operator
To join the table but MUST follow the condition as bitActiv = TRUE:
select emp.nvcEmpName, emp.nvcEmpAddress, ety. nvcEmployeeType from cst_EmpProfile emp left join cst_EmpType on emp.intEmployeeTypee = ety.intEmpType and emp.bitActiv = 1.
But, the sql statement doesnt output the my expected result.
Because the data row return must be 1st and 2nd row as it bitActiv = true.
So, how's I going achieve what i want. tq.
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
I have a problem when I Left Join this table:
plb_siswa
NSS |NIP |NAMA |JENIS
--------------------------------
28101712 |992002 |ROSIAH |GURU
plb_penataran
NSS |NIP |NAMA_PENATARAN |TAHUN
--------------------------------------------------
28101712 |992002 |KETRAMPILAN |2000
28101712 |992002 |PENYULUH BAHASA INDONESIA |2001
and the result is:
NSS |NIP |NAMA |JENIS|PENATARAN |TAHUN
----------------------------------------------------------------
28101712 |992002 |ROSIAH |GURU |KETRAMPILAN |2000
28101712 |992002 |ROSIAH |GURU |PENYULUH |2001
There are 2 rows with the same person, but I need the result like this:
NSS |NIP |NAMA |JENIS|PENATARAN1 |PENATARAN2|TAHUN1|TAHUN2
--------------------------------------------------------------------
28101712 |992002 |ROSIAH |GURU |KETRAMPILAN |PENYULUH |2000 |2001
How can I join that table to make the result just one record?
Can anybody help me?
I have an problem with the order of the results after a join.
My first query works fine and the order of field Name ist correct.
Select *
FROM
(SELECT * FROM
dtree A1
WHERE
A1.Subtype=31356
AND
A1.DataID IN
(select DataID from dtreeancestors where AncestorID=9940974)) t
When I do a join the order of the left table changes
Select *
FROM
(SELECT * FROM
dtree A1
WHERE
A1.Subtype=31356
AND
A1.DataID IN
(select DataID from dtreeancestors where AncestorID=9940974)) t, llattrdata A4
WHERE
t.DataID = A4.ID
How can I do a join and keep the order of the left table?
I have a query that has a left join with a large partitioned table. The partitioned table has 10s of millions of records, and each partition has about 100,000 records.
The left join is part of an insert that gets a column from the partitioned table, if the column exists. The query contains the partition ID and all other joined columns are part of a non-clustered index.
Through the profiler, I found that there were millions of reads and the execution plan was giving me a table scan on the partitioned table.
I changed the query to do the insert followed by an update with inner join. That did the trick, but it worries me that SQL Server 2014 behaves differently from 2012 or 2008R2, which can make upgrading very time consuming.
I am still new to SQL and I am having trouble obtaining the results I need from a query. I have worked on this command for some time and searched the internet but cannot seem to still get it correct.
I have a table called Patient. It's primary key is pat_id.
I have a second table called Coverage. It has no primary key. The foreign keys are pat_id, coverage_plan_id, and hosp_status.
I have a third table called Coverage_History. It has a primary key consisting of pat_id, hosp_status, copay_priority, and effective_from.
I want to get the pat_id and all the coverage information that is current. The coverage table contains specific insurance policy information. The coverage_history table will indicate the effective dates for the coverage. So the tables could contain something like this:
Patient (pat_id and lname)
P123 Monto
P124 Minto
P125 Dento
P126 Donto
Coverage (pat_id, coverage_plan_id, hosp_status, policy_num)
P123 MED1 OP A1499
P123 ACT4 OP H39B
P124 MED1 OP C90009
P124 RAC OP 99KKKK
P124 RAC OP 99KKKK
P124 MED1 OP C90009
P125 ARP OP G190
P126 BCB OP H88
Coverage_History (pat_id, hosp_status, copay_priority, effective_from, coverage_plan_id, effective_to)
P123 OP 1 20150102 MED1 NULL
P123 OP 2 20150102 ACT4 NULL
P124 OP 1 20150203 RAC 20150430
P124 OP 2 20150203 MED1 20150430
P124 OP 1 20150501 MED1 NULL
P124 OP 2 20150501 RAC NULL
P125 OP 1 20150801 ARP NULL
P126 OP 1 20150801 BCB 20160101
select p.pat_id, p.lname, ch.coverage_plan_id, ch.hosp_status, ch.effective_from, ch.effective_to, ch.copay_priority,
from patient p
left join
( coverage_history ch left join coverage c on ch.coverage_plan_id = c.coverage_plan_id and ch.patient_id = c.patient_id and
(ch.effective_to is NULL or ch.effective_to >= getdate()
)
) on ch.patient_id = p.patient_id
where ( ch.effective_to is NULL or ch.effective_to >= getdate() )
So I want to see:
P123 Monto MED1 OP 20150102 NULL 1
P123 Monto ACT4 OP 20150102 NULL 2
P124 Minto MED1 OP 20150501 NULL 1
P124 Minto RAC OP 20150501 NULL 2
P125 Dento ARP OP 20150801 NULL 1
P126 Donto BCB OP 20150801 20160101 1
Looking to improve performance of the following code.
It basically generates future days for each dog. So there is a dog table and a day table with every day.
These 2 table cross join and then fill in missing rows. As time moves i will fill in further future dates but will need the initial insert to be a reasonable query.
All columns are covered by index's but the queries at the end take quite a long time. I would hope for index scan to just point out the missing rows especially on the final query.
How to make the last query as fast as possible.
IF OBJECT_ID('dbo.[AllDates]', 'U') IS NOT NULL
DROP TABLE dbo.[AllDates]
CREATE TABLE dbo.[AllDates] (
[Date] date not null PRIMARY KEY
)
;WITH Dates AS
[Code] .....
I am trying to tweak some code which is used to display the newest comments left on photos created by my members.
The existing code is this:
SELECT top 15 pnumber,pcomment,puser FROM photocomments order by pdate DESC
So the latest comment left was for photo #210879 from user "Cla" (redacted user names). The 2nd newest comment would be for photo #211072 from a member named "mo". pdate is a date field
However for the script I have coded I don't want all of the photo comments to show up. This is because I use access levels based on the type of location (higher levels mean more restricted galleries). I check the access levels as I go through the recordsets.
I use this method to get the top 15 comments:
SELECT top 15 pnumber,pcomment,puser FROM photocomments order by pdate DESC
Now I have to use two other tables to determine the access level. Since PHOTOCOMMENTS is just a list of photo #'s and the people who left comments for those photos, I need to:
a) determine what location the photo is from and
b) determine the access level of that location
I use: select creator,access from locations where id=(select dir from photos where id="&pnumber&")"
This is a two step process as you can see. The first part is:
select dir from photos where id=(pnumber)
ID is the same value as pnumber seen in PHOTOCOMMENTS. That is to say PHOTOS.ID = PHOTOCOMMENTS.PNUMBER
If I haven't confused you yet, the executed code for the first example would be:
select dir from photos where id=210879
which would get me a value for DIR. DIR is the location number which would be:
select creator,access from locations where id=(dir value)
Just to simplify it a bit....
There are three tables (shown below)
PHOTOCOMMENTS
PHOTOS
LOCATIONS
I need to: SELECT top 15 pnumber,pcomment,puser FROM photocomments order by pdate DESC (first table shown)
but then also
select creator,access from locations (The last table shown)
where id=(select dir from photos where id="&pnumber&")"
So the first table PHOTOCOMMENTS has to also join PHOTOS table where PHOTOS.DIR = PHOTOCOMMENTS.PNUMBER in order to get the value of "DIR" and then DIR is joined to the LOCATIONS tables where PHOTOS.DIR = LOCATIONS.ID
Here is the actual code, which I am trying to make into a single SQL command
strSQL = "SELECT top 15 pnumber,pcomment,puser FROM photocomments order by pdate DESC"
set ors = oconn.Execute(strSQL)
tl = 0
do until ors.eof or tl > 15
' until we have 15 results because not every recordset will be of the proper security level
[Code] ....
Bonus points if you can also get it to select from LOCATIONS only WHERE userlevel >= 2
Is there any difference between left join and left outer join in sql server 2000?please reply with example if any?
Thanks in advance
Hi,
Whats the diference between a left join and a left outer Join
Hi all,
I got an error message 156, when I executed the following code:
////--SQLQueryParent&Child.sql---////////
Use newDB
GO
----Creating dbo.Person as a Parent Table----
CREATE TABLE dbo.Person
(PersonID int PRIMARY KEY NOT NULL,
FirstName varchar(25) NOT NULL,
LastName varchar(25) NOT NULL,
City varchar(25) NOT NULL,
State varchar(25) NOT NULL,
Phone varchar(25) NOT NULL)
INSERT dbo.Person (PersonID, FirstName, LastName, City, State, Phone)
SELECT 1, "George", "Washington", "Washington", "DC", "1-000-1234567"
UNION ALL
SELECT 2, "Abe", "Lincoln", "Chicago", "IL", "1-111-2223333"
UNION ALL
SELECT 3, "Thomas", "Jefferson", "Charlottesville", "VA", "1-222-4445555"
GO
----Creating dbo.Book as a Child table----
CREATE TABLE dbo.Book
(BookID int PRIMARY KEY NOT NULL,
BookTitle varchar(25) NOT NULL,
AuthorID int FOREIGN KEY NOT NULL)
INSERT dbo.Book (BookID, BookTitle, AuthorID)
SELECT 1, "How to Chop a Cherry Tree", 1
UNION ALL
SELECT 2, "Valley Forge Snow Angels", 1
UNION ALL
SELECT 3, "Marsha and ME", 1
UNION ALL
SELECT 4, "Summer Job Surveying Viginia", 1
UNION ALL
SELECT 5, "Log Chopping in Illinois", 2
UNION ALL
SELECT 6, "Registry of Visitors to the White House", 2
UNION ALL
SELECT 7, "My Favorite Inventions", 3
UNION ALL
SELECT 8, "More Favorite Inventions", 3
UNION ALL
SELECT 9, "Inventions for Which the World is Not Ready", 3
UNION ALL
SELECT 10, "The Path to the White House", 2
UNION ALL
SELECT 11, "Why I Do not Believe in Polls", 2
UNION ALL
SELECT 12, "Doing the Right Thing is Hard", 2
GO
---Try to obtain the LEFT OUTER JOIN Results for the Parent-Child Table
SELECT * FROM Person AS I LEFT OUTER JOIN Book ON I.ID=P.ID
GO
////---Results---//////
Msg 156, Level 15, State 1, Line 5
Incorrect syntax near the keyword 'NOT'.
////////////////////////////////////////////////////
(1) Where did I do wrong and cause the Error Message 156?
(2) I try to get a Parent-Child table by using the LEFT OUTER JOIN via the following code statement:
Msg 156, Level 15, State 1, Line 5
Incorrect syntax near the keyword 'NOT'.
Can I get a Parent-Child table after the error 156 is resolved?
Please help and advise.
Thanks,
Scott Chang
I have two xml source and i need only left restricted data.
how can i perform left restricted join?
Scenario:
OLEDB source 1
SELECT ...
,[MANUAL DCD ID] <-- this column set to sort order = 1
...
FROM [dbo].[XLSDCI] ORDER BY [MANUAL DCD ID] ASC
OLEDB source 2
SELECT ...
,[Bo Tkt Num] <-- this column set to sort order = 1
...
FROM ....[dbo].[FFFenics] ORDER BY [Bo Tkt Num] ASC
These two tasks are followed immediately by a MERGE JOIN
All columns in source1 are ticked, all column in source2 are ticked, join key is shown above.
join type is left outer join (source 1 -> source 2)
result of source1 (..dcd column)
...
4-400-8000119
4-400-8000120
4-400-8000121
4-400-8000122 <--row not joining
4-400-8000123
4-400-8000124
...
result of source2 (..tkt num column)
...
4-400-1000118
4-400-1000119
4-400-1000120
4-400-1000121
4-400-1000122 <--row not joining
4-400-1000123
4-400-1000124
4-400-1000125
...
All other rows are joining as expected.
Why is it failing for this one row?
Why would I use a left join instead of a inner join when the columns entered within the SELECT command determine what is displayed from the query results?
View 4 Replies View RelatedWhy does this right join return the same results as using a left (or even a full join)?There are 470 records in Account, and there are 1611 records in Contact. But any join returns 793 records.
select Contact.firstname, Contact.lastname, Account.[Account Name]
from Contact
right join Account
on Contact.[Account Name] = Account.[Account Name]
where Contact.[Account Name] = Account.[Account Name]
Hi guys,
I'll appreciate any help with the following problem:
I need to retrieve data from 3 tables. 2 master tables and 1 transaction table.
1. Master table TBLOC contain 2 records :
rcd 1. S01
rcd 2. S02
2. Master table TBCODE contain 5 records:
rcd 1. C1
rcd 2. C2
rcd 3. C3
rcd 4. C4
rcd 5. C5
3. Transaction table TBITEM contain 4 records which link to 2 master table:
rcd 1. S01, C1, CAR
rcd 2. S01, C4, TOY
rcd 3. S01, C5, KEY
rcd 4. S02, C2, CAR
I use Left Join & Right Join to retrieve result below (using non-ASNI method) but it doesn't work.
Right Join method:
SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A RIGHT JOIN TBCODE B ON A.CODE = B.CODE
RIGHT JOIN TBLOC C ON A.LOC = C.LOC
GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE
When I use Non-ASNI method it work:
SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A, TBCODE B, TBLOC C
WHERE A.CODE =* B.CODE AND A.LOC =* C.LOC
GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE
Result:
LOC CODE ITEM
-----------------------------
S01 C1 NULL
S01 C2 NULL
S01 C3 CAR
S01 C4 TOY
S01 C5 KEY
S02 C1 NULL
S02 C2 CAR
S02 C3 NULL
S02 C4 NULL
S02 C5 NULL
Please Help.
Thanks.
SELECThorse1.horse_name AS Child_Horse,
horse2.horse_name AS Sire_Horse,
event.event_name
FROMhorse AS horse1 INNER JOIN horse AS horse2 ON horse1.sire = horse2.horse_id,
entry,
event
WHEREhorse1.horse_id = entry.horse_id
ANDentry.event_id = event.event_id
[Code] ....
I need to list the names of the horses that has entered in the same event as its sire and above is the result that I've got.I'm meant to get only the first two lines of the result since Boxer is father of Flash and Star and they all entered the same event called Dressage. (below is the evidence and refer to the first three rows)
SELECTentry.event_id,
entry.horse_id,
horse.horse_name
FROMentry,
horse
WHEREhorse.horse_id = entry.horse_id
[Code] ....
with my code in the first box, what should I add in order to get the result that I want?
I'm trying to join 2 tables. I thought I was getting the correct results but it turns out I'm not.
My Query:
SELECT IVINVA, IVORDN, IVCSLN, IVRESR, IVCITM, CONVERT(varchar(12),CAST(IVIAMT as money),1) AS ExtPrice, CONVERT(varchar(12),CAST(IVPIVC as money),1) AS DistPrice, IVCSUM, IVQYCS, IVDESC, OIRESR, OIDPCT, CONVERT(varchar(12),CAST(IVPIVC - (OIDPCT / 100 * IVPIVC) as money),1) AS NetPrice FROM INVDET1_TBL LEFT JOIN ORDDIS_TBL ON ORDDIS_TBL.OIORDN = INVDET1_TBL.IVORDN AND ORDDIS_TBL.OIRESR = INVDET1_TBL.IVRESR WHERE IVORDN = '0859919' AND IVINVA = '00324024'
Basically, my problem lies in the seonc condition of the LEFT JOIN. I needed to set the two tables equal my item number, because in some situations I need that logic to get the correct result. It most other cases, that item column in the ORDDIS_TBL is NULL, thus giving me the wrong results. In that case, I would want the JOIN to only be ORDDIS_TBL.OIORDN = INVDET1_TBL.IVORDN, and not include the second part. Is there a way I can condition this with an If statement, If ORDDIS_TBL.OIRESR is Null then do this join, if not, then do this? I'm confused how to get the proper result here.
I need to make a left join from the freezefile f, to sped s, instead of having f.studentid = s.id in the where clause. Any help??
select f.studentid, f.studentname, f.sex, fs.mealstatus, s.except, s.lre, r.description, g.testid, g.scale_la, g.scale_ma, t.test_name, t.year
from freezefile f, fsapps fs, sped s, regtb_exception r, gqe_scores g, test_info t
where
f.type = 'ADM'
and
s.except = r.code
and
t.test_name = 'ISTEP'
and
t.year = 2004
and
g.testid = t.testid
and
f.studentid = fs.id
and
f.studentid = s.id
and
f.studentid = g.studentid
i'm shure it's some smal stiupid mistake bat I can't find it, PLZ help.
1)
select komorka from #plantemp
--result
komorka
09
10
I-P
II-P
III-P
SI/1
SI/2
SI/3
2)
select komorka,ustalenia from analiza_1 a where a.koniec between '20040701'and '20040731'
komorka ustalenia
SI/1788138.9300
SI/246638.4900
SI/216218.4000
08.0000
3)
select p.komorka,isnull(sum(ustalenia),0)
from #plantemp p left join analiza_1 a on p.komorka=a.komorka
where a.koniec between '20040701'and '20040731'
group by p.komorka
komorka ustalenia (sum)
08.0000
SI/1788138.9300
SI/262856.8900
I need all rows from table 1 bat right and left join gives me the same results, WHY
There are two tables:
tblIndices:
IndexID, Name
1index1
2index2
3index3
.
.
.
tblBasketConstituents
ID, ParentIndexID, ChildIndexID, Weight
121 20
223 80
313 50
412 50
As you can see the ParentIndexID and ChildIndexID fields refer to tblIndices.IndexID
I would like a stored procedure as follows:
show all index names and show the wights for the indexID you passed.
This is what I have so far and it is not correct yet. Not sure what the syntax should be.
alter PROCEDURE [dbo].[uspBasketIndices_Get]
@IndexIDint
AS
select
i.IndexID,
i.[Name],
bc.Weight
from
tblIndices as i left join tblBasketConstituents as bc on i.IndexID = bc.ParentIndexID
and i.IndexID = @IndexID
order by
i.[Name]
Any one know any facts and figures about maximum Left Joins allowed (or recommended) in one query?
I am running a MS SQL 2000 my database is full of relational data and most of my foreign keys (INT data type) are a Clustered Indexed, Usually I will only be pulling one record from collection of about a dozen tables, but the Database is expected to grow fast and become big.
Right now I have a Stored Proc that has eight(8) LEFT JOINs in it. My worry is that this query will kill me as the database approaches 50,000 records.
Lito
Hi all. My query works fine, it generates reports but not my expected result.
select d.fullname, p.nickname, p.birthdate, p.birthplace,
p.gender, p.civilstatus, p.religion, p.nationality, p. weight, p.height,
p.haircolor, p.eyecolor, p.complexion, p.bodybuilt, p.picture, p.dialectspoken,
d.mobilephone, d.prprovince,[Age] = dbo.F_AGE_IN_YEARS( birthdate, getdate() ),
c.name, c.address, c.telno, c.email, c.occupation, ed.year1, ed.year2, ed.degree, sch.schname
from hremployees as e
inner join psdatacenter as d on e.empdcno = d.dcno
inner join pspersonaldata as p on e.empdcno = p.dcno
left join hrappempcharrefs as c on e.empdcno = c.empdcno
left join hrappempeducs as ed on e.empdcno = ed.empdcno
left join hrsetschools as sch on ed.schoolcode = sch.schcode
the above query gives a 77 records
if i ran "select * from hremployees" generates 60 records
i think the error is in the left joining.
hrappempcharrefs, hrappempeducs and hrsetschools must be left joined to hremployees.
thanks
-Ron-
Hi Guys,
I started working with linq and vb9.0 but i have a small problem i could feagure how to solve in c# but not in vb
I wanted to make left join or right join on vb 9.0 and linq is it possible or this is only c# feature ?
Waiting to hear from u guys,
Thanks
Softy
Hello!
I need to write a query using left outer join and I'm having trouble with it.
I have 2 tables:customer and cust_info.
I want to pull all records from customer table and cust_info table even if there is no related data in cust_info table.
But I need one condition in this query:only records from customer table where cus_type in ("A","B","C").
I don't need all other types ("D","E").
So my query looks like this:
select customer.cus_name,customer.cus_address,customer.cu s_type,cus_info.status
from customer
left outer join cus_info ON customer.sxdat_pk = cus_info.sxdat_pk
and cus_type in ("A","B","C")
AND cus_info.cus_table = 'CUSTOMER'
The result should be like this:
cus_name cus_address cus_type status
Amoco 457 bent A new
Bingo 47 lone oak C NULL
Sears 1020 Magic dr. B exist
But my query pulls records for customers with type "D" and "E" that I'm trying to exclude from result.
Please help.
Thanks,
lena
Hello everybody!!!
I have to left join 2 tables. The first consists of columns:id, description, descr_num.
The second table: id, descr_num, value.
I need to extract description from table1 where descr_num is in the range , say, 1-10.
LEFT JOIN
extract value from table2 ,descr_num should be in the same range. in table2 some values from (1,10) and desc_num could be not present.
BUT i want this left join to be limited as i said.
Is there any solution to this prob. without creating temp tables. Or actually can i do such a join?
Thank you
Hi, I'm getting the error Syntax error (missing operator) in query expression 'dbPWork.id = dbPWorkWord.work_id LEFT JOIN words ON dbPWorkWord.word_id = words.id'." on the query below. Everything looks in place to me. Do you see anything that shouldn't work?
Query:
Code:
Code:
SELECT DISTINCT dbPWork.id, description_e as description, w_id , dateStart, dateEnd FROM dbPWork
LEFT JOIN dbPWorkW ON dbWork.id = dbPWorkW.work_id
LEFT JOIN words ON dbPWorkW.word_id = words.id
Everything works fine until I add the second LEFT JOIN statement. Any ideas? I'm stumped.
I have a left join that doesn't suit my request.
select * from A
left join B
on A.x=B.x
The problem is that for a specific record in A we can find 1 or more entries in B. What I want is to return only the 1st entry found on B.
thx
Hi,
I have got a query for you guys. Can any one temme the difference between
"FROM Table_A LEFT JOIN Table_B" and "FROM Table_B RIGHT JOIN Table_A"
;)
Thanks,
Rahul Jha