Send Email -OnError Event
Oct 19, 2006
I have included the Send email task and sending email from SSIS package on Error event.
But for an error I am receiving multiple atleast 10-15 email generated. i got only 2 emails with revelant error message and other email gives message like "
Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown."
I have included ''@[System::ErrorDescription]' as an email attachment.
Is there any way to get only specific relevant error email.
Please suggest
View 8 Replies
ADVERTISEMENT
Nov 2, 2006
I used onError event to send email in case ssis pckage fails
but it send multiple email with errordescription. for ex below are the errordescription of four diferent emails i received.
Thread "WorkThread0" has exited with error code 0xC0047039.
An error occurred with the following error message: "The connection "{01AF859A-CF97-4F6C-9C78-1AA4B1C9C27B}" is not found. This error is thrown by Connections collection when the specific connection element is not found.".
Thread "SourceThread0" has exited with error code 0xC0047038.
The PrimeOutput method on component "Flat File Source - Read from source file" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Can anyone suggest if we can combine all this error description and send this as one email.
View 2 Replies
View Related
Mar 25, 2008
Hi All,
I need to send out email when error occurs in the package. Is it a good practice to put the send email task in the event handler? Then MaximumErrorCount is set to 1. But for some reason, some time I saw more than one email are sent out. Please advise. Thanks
View 6 Replies
View Related
Aug 30, 2006
Hi
We are generating log file in our SSIS package by enabling the built-in feature of SSIS tool. We are generating log for the "OnError" event. This also recorded the error/failed task messages in the text file "log.txt". That error information is too complex with more unwanted information like below
----------------OnError,,,pkgExtract,,,8/30/2006 11:50:04 AM,8/30/2006 11:50:04 AM,-1071636471,0x,An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
OnError,,,pkgExtract,,,8/30/2006 11:50:04 AM,8/30/2006 11:50:04 AM,-1071607780,0x,There was an error with input column "create_user_id" (116) on input "OLE DB Destination Input" (103). The column status returned was: "The value violated the integrity constraints for the column.".
OnError,,,pkgExtract,,,8/30/2006 11:50:04 AM,8/30/2006 11:50:04 AM,-1071607767,0x,The "input "OLE DB Destination Input" (103)" failed because error code 0xC020907D occurred, and the error row disposition on "input "OLE DB Destination Input" (103)" specifies failure on error. An error occurred on the specified object of the specified component.
---------------------------------
This is infact not in a better readable format. We also don't want to do our error logging in database.
Is there any way of defining our error log and create error error log with customization of our messages . Can we do it using OnError event handler.
Please help us with some good solution to avoid giving this confused error log messages.
Thanks
Kumaran
View 1 Replies
View Related
Oct 19, 2006
Is the Onerror Event Handler from the tabbed window in the IDE the same as the red arrow paths that can be used in the control flows and Data Flows?
If yes, what and where is the best practice to use?
If not, can you elaborate?
Thanks,
View 4 Replies
View Related
Apr 17, 2007
Hi,
I am having a few problems getting the opomum configuring the OnError event hendler for my new package. What im trying to do is log the Error event and sound out an email (which i am achiving) where i am encountering a problem is trying to determin the severity of the error.
What i would like to achive is to send an email and log the error (as i currently do) but if the error has the power to stop the package from executing i would like to fire an additional script to move the loading files to a failed location.
My initial thoughs were to put an expression the on the procdural constraint in he error handeler but i cant find which System variable to apply the logic to.
Anyone any suggestions?
Thanks
Paul
View 2 Replies
View Related
May 20, 2008
Hi guys,
I have a package name "Package1" and I have a few data-flow tasks in it.
whenever anything fails in the "Package1", I want to send out the failed email to alert myself.
So first step, I went to EventHandler tab, and select Executable as "Package1" and Event Handler as "OnError".
and then I added SendMailTask. I manually ran SendMailTask, failed email send to me okay.
But when I run package from Microsoft visual Studio (IDE), the package failed but it doesn't send out failed email.
Error code:
[174]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "xxx" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Maybe I misunderstand OnError eventhandler, or I set up it wrong.
Thanks
View 6 Replies
View Related
Apr 15, 2008
I have a package which have two sequence container, first container is used to transfer data to a staging area and second sequence container is used to transfer to destination from that staging area. And I also apply transaction required to second sequence container.
There are several execute sql tasks and several data flow tasks inside two sequence container.
first sequence container( 1.execution sql task-> 2.data flow ->3.execution sql task) ->
second sequence container(4.execution sql task-> 5.execution sql task-> 6.data flow-> 7.data flow -> 8.execution sql task-> 9.data flow...)
I create ExecutionLog table which is used to log status for this package on our sql server. First this status field is null, then during this package run , it change to 'in process', and after this package finished, it change to 'success' or 'failure' depending this package can run successfully or not.
This package can be run only if status is 'success' ,'failure' or null. So I need to change this status field during package execution.
For updating package to failure, I need to add event handler to change that status using execute sql task.
First time I perform to execute sql task on onError event handler tab (this event handler is applyed on package level ) .
And for testing envent handler I use old schema version to make sure I get failure for '8 execution sql task'.
But package seems to get stuck at '8 execution sql task' inside second sequence container( always yellow when I run from ssis) and never fire envent handler. '8 execution sql task' is used to update related table.
Second time I remove onError envent handler and change to use on onTaskFailed event handler tab (this event handler is applyed on package level ) .
But everything is the same as using onError event handler except I got error output but still can not fire event.
Why '8.execution sql task' can not fire onError or onTaskFailed?
For this case what kind of event handler I need to use, what kind of level I need to apply for this event handler.
View 5 Replies
View Related
Aug 10, 2006
Hi,
I want insert data into table from csv file, so I put a data flow task on control flow tab,
a flat source and a ole db dest on data flow tab. They work well.
Then to get the error log I put a script task on event handler tab, in this script task I want to
output the error description to a txt file while the data flow task fails for any reasons
such as constraint failure etc.
In this script task I think I can get the error description by using property Err.Description,
but Err.Description is empty while data flow task fails.
How can I get the error description in the script task on event handler tab.
thanks!
View 3 Replies
View Related
Apr 15, 2004
Dear All:
I want to ask how can I handle OnError events in stored procedure in MSSQL.
Actually I wanted to place some Rollback procedure on this.
Can you suggest some methods for me?
KEVIN
View 1 Replies
View Related
Oct 22, 2007
I have an SSIS package that contains a For Each Loop Container. I have three Data Flow tasks within the container. I have an OnError event handler associated with the encapsulating container. When one of the Data Flow tasks within the For Each Loop Container fails, the OnError for the Loop Container gets called 5 times. The OnError handler is just a script task that sends a notification email. I am not explicitly Dts.taskresult = failure, nor am I calling FireError.
View 1 Replies
View Related
Apr 18, 2008
I'm trying to implement a custom log table. To keep the discussion simple, let's say I only have 1 column in this table and all I want to write in it are
"Start" when the package starts
"Error" when it encounters an error
"Finish" when the package finishes. Even if there was an error, I still want to enter "Finish'.
My Control Flow has 3 task objects, 2 Execute SQL Tasks, and 1 Data Flow Task in between them.
The first Execute SQL Task does an insert statement for the Start and the second Execute SQL Task does an insert for the Finish.
To capture any package errors, I also have an Execute SQL Task (to insert "Error") in the Event Handler for OnError. I see that when I cause an error in my package it can raise multiple OnError events, which will envoke my Execute SQL Task multiple times. (This is good because it will allow me to write a line per error event with the error description.)
The problem I have is, how do I write the "Finish" log when I have an error? If I put the insert for the finish in the same Execute SQL Task with the errors, then it will write a "Finish" for every error. But I can't put it anywhere else because if I put it anywhere else, the package never makes it there because it stops at the OnError Event Handler.
Or is there a way for me to tell the package to do the 2nd Execute SQL Task all the time?
Lastly, is there a better way to do this kind of custom logging?
View 28 Replies
View Related
Mar 26, 2008
Hi all,
I have a package on which i've applied a package level OnError event handler. The OnError event handler includes a Script Task (that builds up a string of errorCode, errorDescription, MachineName etc...) and a WebService Task that calls a webservice to send an email including the built up string from the script task in the body of the email. This has worked fine in one package where i've applied it but for some reason in a second package the existence of an OnError package level event handler seems to be completed ignored. I'm causing various package object to fail but the OnError handler never fires. I know the obvious answer is find what's different between the two packages but i can't see that any is different (in relation to package level OnError event handling).
Has anyone else come across this? Any suggestions?
Thanks
M.
View 3 Replies
View Related
Feb 4, 2008
Greetings,
We have a package that runs on 3 servers, all based in different countries and time zones. Each package does logging to a common SQL Server based in New York. (We log to the same server to make monitoring of the package run results easier.) We expect that our overseas servers will occassionally fail to make a database connection and have coded a Try/Catch block in our Script task to ignore errors that occur when attempting the SQL Server logging.
The problem is that the OnError event handler defined at the package level is being called whenever a server fails to make a database connection. The Catch block appears to not be called at all. I've included below the short method that does the SQL Server logging. The "Dts.Log" line logs to a SQL Server and usually works. However, when it fails, the "WriteEventLogEntry" method is supposed to be called to write an error to the server's event log. (I haven't included the "WriteEventLogEntry" code but it works fine when called elsewhere in the package to do our non-error event logging.)
Public Sub WriteSqlServerLogEntry(ByVal logMessage As String, ByVal dataCode As Integer, ByVal dataBytes() As Byte, ByVal rowsInserted As Integer)
Try
Dts.Log(logMessage, dataCode, dataBytes)
Catch ex As Exception
WriteEventLogEntry("An exception was thrown while attempting to log the following message to the SQL Server provider: " + logMessage, EventLogEntryType.Error, rowsInserted)
End Try
End Sub
Shouldn't a Catch block prevent the OnError event from being raised? How can I change my package to ignore all errors that occur when attempting SQL Server logging?
Gracias!
BCB
View 5 Replies
View Related
Aug 25, 2009
I have created an OnError Event Handler to catch an error in the Execute SQL Task in the Control Flow. On error I am simply inserting a few parameters in a DB table using Execute SQL Task. I followed the instructions in: [URL]....
Now when I run this error hanlder task manually it runs fine but when I purposely fail the SQL Task it never fires the error handler. I am not sure why. I checked the DisableEventHandler property and it is set to False.
View 23 Replies
View Related
Oct 25, 2011
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date  10/25/2011 10:55:46 AM
Log  SQL Server (Current - 10/25/2011 10:55:00 AM)
Source  spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Â
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
View 2 Replies
View Related
Oct 6, 2006
My project currently has task which have their own individual event handlers that get called onError (setup event messages). I also have a package level event handler that performs a generic task (sending events to the windows eventviewer) In the package level event handler there is a script task that decides on a boolean variable whether to "Success" or "Failure" to different task. When I fail one task of the main control flow, the task level event handler runs, then the package level event handler runs, and then it also runs again for some unknown reason. The second time it runs it picks up the value of a variable set in the variables window. However, I change this value at runtime to the value from a database. I can't understand why it would run the second time, and if it did run why it would have the value from the variables window and not the value that is set in memory. It's like the event handler runs with the value from memory and then runs and picks the values back out of the variables window, replacing the db values and re-runs.
Maybe the package itself is failing all together and then re-runing the package level event handler?
Any help would be greatly appreciated.
-Chris
View 1 Replies
View Related
Apr 26, 2007
Hi,
I've setup the option to mail the error to a person. When the option is on I get the error message by mail but the package does not finish (eg. the failing task does not become red and the output windows never says anything about the error) - if I set the option to off the task fails as expected.
Is there something I havn't set up correctly?
Regards
Simon
View 5 Replies
View Related
Mar 22, 2007
I'm using SQL with an Access form for the front end. Is there anyway to have an email sent on the trigger of an event within the form? I'm not sure where to even begin.
View 4 Replies
View Related
Aug 10, 2004
I am trying to set up the email notification system in SQL server 2000, but im having some problems. Mainly, im having problems with setting up an email account in the first place (there is a dedicated mail box, but the one im working with is a different box altogether).
If anyone could help fathom this out from start to finish i would be really grateful.
View 1 Replies
View Related
Sep 11, 2006
Hi all, can i send an email through SQL? i don't want to use third party software. Also, i can't configure the customer's db server. It is possible to send an email without much configuration. If configuration needed, is it possible to configure through SQL script? thx
View 8 Replies
View Related
Mar 27, 2008
Hi,
I need to select a table from my database and send the table as an email message to a person every 10am because the table changes every day. How to it?
View 2 Replies
View Related
Jan 30, 2008
Hi all,
actually i m working on a store procedure in which end of the procedure when task complete it's send email to specific person, but i m having a problem using this function.
i am using
EXEC master..xp_sendmail @subject = @cmd, @recipients = @recipients, @message = @@servername
it's work fine when the outlook is configure on the server, but is there any way to send email rather then configure outlook on the server just chk internet is working send email on behalf of server,
i have more then 2 servers and outlook is configure only one server and i don't want to configure outlook on other server due to work load on server.
Thanks and looking forward.
-MALIK
View 4 Replies
View Related
Sep 6, 2007
How can i send email through sqlserver on Micrsoft Exchange?
View 2 Replies
View Related
Oct 25, 2004
How can I send an email from sql server.
I tried the following code which gives me no errors but doesn't send the email.
Code:
CREATE Procedure sp_SMTPMail@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000)ASSET nocount ondeclare @oMail int --Object referencedeclare @resultcode intEXEC @resultcode = sp_OACreate 'CDONTS.NewMail', @oMail OUTif @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'From', @SenderAddressEXEC @resultcode = sp_OASetProperty @oMail, 'To', @RecipientAddressEXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'Body', @BodyEXEC @resultcode = sp_OAMethod @oMail, 'Send', NULLEXEC sp_OADestroy @oMailENDSET nocount off GO
GO
Can anyone recommend a solution to send email from sql server?
View 1 Replies
View Related
Feb 8, 2005
This was a P A I N to get working. Maybe someone else here is sending email and could use it.
A UNICODE Send Mail using CDOSYS with ReadReceipt and Importance...
Sub SendMail (sFromAddress, sToAddress, sCcAddress, sBccAddress, sSubject, sBody, boolReadReceipt, intImportance )
'on error resume next
Const cdoDispositionNotificationTo = "urn:schemas:mailheader:disposition-notification-to"
Const cdoReturnReceiptTo = "urn:schemas:mailheader:return-receipt-to"
dim cdoMessage, cdoConfiguration
Set cdoConfiguration = Server.CreateObject ("CDO.Configuration")
' Outgoing SMTP server
With cdoConfiguration
.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "localhost"
.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
.Fields("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
.Fields("http://schemas.microsoft.com/cdo/configuration/smtpconnectiontimeout") = 60
.Fields.Update
End With
Set cdoMessage = CreateObject("CDO.Message")
With cdoMessage
' Update the CDOSYS Configuration
SET .Configuration = cdoConfiguration
.BodyPart.charset = "unicode-1-1-utf-8"
IF boolReadReceipt Then
.Fields(cdoDispositionNotificationTo)= sFromAddress
.Fields(cdoReturnReceiptTo)= sFromAddress
End If
' Set the Importance: 0:Low, 1:Normal, 2:High
.Fields("urn:schemas:httpmail:importance").Value= intImportance
.Fields.Update
.From= sFromAddress
.ReplyTo= sFromAddress
.To= sToAddress
.Cc= sCcAddress
.Bcc= sBccAddress
.Subject= sSubject
.Textbody= sBody
.Send
End With
Set cdoMessage = Nothing
Set cdoConfiguration = Nothing
End Sub
View 6 Replies
View Related
Dec 21, 2006
I'm trying to implement DTS and FTP. So that when a company sends or FTP infomation to our server, it runs a script and checks to see if the infomation is correct and sends and email saying successful or unsuccessful.
View 1 Replies
View Related
Jul 20, 2005
1. I'm trying to get the notifications working on the scheduled jobs.I want to email me when the job fails. I created an operator(dmalhotr) and given me as the email address.Here is the error what I'm getting when I'm pressing the test buttonto email myself in properties dmalhotr operator (hope that makessense).Error 22022: sqlserveragent error: the sqlserveragent mail session isnot running; check the mail profile and/or the sqlserveragent servicestartup account in the sqlserveragent properties dialog.I cancel out of it. Then I go to support services --> sql mail -->right-click properties (WE HAVE LOTUS NOT EXCHANGE HERE- dont knowwhether that makes a difference).It says profile name Outlook and I click test. It says Successfullystarted (and stopped) a MAPI session with this profile.I go back to the operator and then click test to send email and I getthe same error. I started and stopped sql server agent and still getthe same error.Not sure how this works, please send me an email as to what I'm doingwrongThanks:DHRUV
View 1 Replies
View Related
Sep 19, 2007
How can I have my email download automatically instead of clicking send/receive all the time?
View 1 Replies
View Related
Jul 31, 2006
Hi Everybody
can somebody please help in finding how to mail the sql server reports via email.
Thanks alot
Nee123
View 8 Replies
View Related
Nov 16, 2005
It seems that using the Send Mail Task, there is no option for me to format my email as HTML. I have all my HTML code in a string and need to format my email to send the string as an HTML email. What would be the best way to approach this?
View 6 Replies
View Related
Sep 20, 2006
I am generating the text file on run time using flat file destination. The text file is generated on the location C: SSIS or D:SSIS based on the location specified in the configuration file.
The text file contains the non matching rows during lookup transform task.
I want to send this dynamically generated text file using the send email task.
But while doing this, I receive an error during package validation:
Package validation error:
Error at send email task [ send email task ] : either the file C:SSISErroroutput.txt does not exists or you do not have permission to access the file.
Error at send email task ; There were error during task validation.
Please suggest as I need to generate the text file only in case of lookup failure.
View 3 Replies
View Related
Oct 12, 2006
Hi guys
Is there anyway to fire an email from within sp - of course base on conditon.
say I write:
declare @emailaddr varchar(4000)
set @emailaddr = 'whatever@me.com'
if not exists(
select a, b from C
group by a, b
having count(*)>1 )
begin ********** -- fire the email to @emailaddress
Is there an sp or a way to send email
Thanks
View 4 Replies
View Related
