Send Mail Task Problem Using A Combination Of ForEach Loop, Recordset Destination, Execute SQL Task And Script Task
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
I was trying to insert some row from one table to another of different database. I was using Execute SQL task along with Foreach loop container.
In my execute SQL task I am using this query
SET IDENTITY_INSERT dbo.Table1 ON
INSERT INTO dbo.Table1
SELECT * FROM DB2.dbo.Table2 WHERE TableKey = ?
When executed I get this error: failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
While the same query when executed in Management Studio Its successful.
The properties I set
For Each Loop Editor Settings: 1) Collection: a) Enumerator Set to ForEach ADO Enumerator b) ADO Object Source Variable: User:bjectVariablename c) Checked Rows in the first table 2) Variable Mapping: New Int Variable2 and Index = 0 to set it to first colunm. 3) Expression: Left blank
Execute SQL Task Editor: 1) General: a) Timeout : 0 b) CodePage: 1252 c) Result Set: None d) SQLSourceType: Directinput e) SQL Statement: SET IDENTITY_INSERT dbo.Table1 ON INSERT INTO dbo.Table1 SELECT * FROM DB2.dbo.Table2 WHERE TableKey = ? f) BypassPrepare: False 2)Parameter Mapping: Variable Name : New Integer variable2 selected Direction: Input DataType: Long ParameterName: 0
Can somebody help me in this regards.
Reference: a) http://www.whiteknighttechnology.com/cs/blogs/brian_knight/archive/2006/03/03/126.aspx
I'm trying to capture the file name and insert to the Database with Loop Container and Execute Sql task...However when I run, I get error with the input parameter.
In my Sql Task, the parameter mapping: Variable name: user::variable, direction: input, Data Type: Varchar, parameter name: @xVariable, parameter size: -1
connectiontype: OleDB sourcetype: direct input statement : insert into xtable(xcolumn) values(@xVariable)
Anyone have any other suggestion how to capture the filename and input in the database?
I am a R data miner who is new to SQL and SSIS and would appreciate any help.
I wanted to automate the process of creating and processing decision tree models for every county in the Country. I wanted to use the foreach loop for iterate through all the counties. I wanted the foreach enumerator to be used by the XMLA code that creates the model so it would append it to the name of the model and i would get a different model for every county. I am not sure how to have the XMLA code accept foreach loop enumerator.
Any help would be greatly appreciated and if you could direct me to a previously done example that would greatly benefit me.
I am trying to execute a UDF in an Execute SQL Task within a Foreach loop.
I have an Execute SQL task to get the dataset (Firstname, Lastname, CompanyID) which is going into a full result set called @PendingPar. The Foreach Loop is set to a Foreach ADO Enumerator against @PendingPar and I have created 3 variables at the Foreach Loop scope level called @Firstname (String), @Lastname (String) and @CompanyID (Int32). These are mapped in the Foreach Loop as index 0,1 and 2.
Within the Foreach Loop I have an Execute SQL Task with the sql command
select dbo.udf_GetParTitle (?,?,?)
In the parameter mapping I have Variable Name = User::Firstname Direction = Input Data Type = VARCHAR and Parameter Name = 0, User::Lastname, Input, VARCHAR, 1 and User::CompanyID, Input, VARCHAR,2
Finally the UDF returns a @NewPar value so i have the result set in the execute sql task to Single Row which goes into variable @NewPar. This @newPar will be used later but I cannot get the first bit to work yet.
the error message i get back is
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "select dbo.udf_GetParTitle (?,?,?)
" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task 1
the initial execute sql task where the dataset is selected works fine but it is within the foreach loop that it fails.
Getting Access Denied To FileName Error When Using the Execute Sql Task (With File Connection) into a Foreach Loop Container.
Please Note :
I have a folder containing .sql files. I have to dynamically loop through the files and send them as a File connection Folder to the Execute Sql Task.
When I run this Package I am getting the follwoing error :
[Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:ProjectsFuzzy Lookup DataFlow ExampleScripts' is denied.".
Also I have logged in to the machine as Administrator and to Sql Server with sa.
I have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine: Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads: SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
My Foreach Loop container has 10 different task inside. I want to execute the first task only one time. I have a variable with increases for each repition. How can I put precedence contstraint on the first task so that it should execute only first time and other task has to execute all the time.
Hi I have created a web service task that sits inside of a foreach loop. The loop is a ado enumerator. This loop is going to loop through about 35,000 records and make 35,000 web service calls.
So far through my testing, I have gotten it to read and write everything correctly, but each call to the web service takes about 1-2 seconds and maxes out the CPU. This would take almost all day for this web service to run at 100% CPU power all day. We want to be able to run this a few times a day or at least once a day.
I have disabled all of the other tasks in the foreach loop so it just calls the web service task and found that it's the web service task that takes up 100% of the CPU and takes 1-2 seconds to run. I have also tried creating a mock web service on the server that just sends back the same mock data, so it's extremely fast, but the Web Service Task still maxes out the CPU and takes 1-2 seconds per call.
I have tried this out on 2 different servers, all with a few gigs of ram they're not using. It seems more like it's a CPU thing, or that the Web Service Task has a high overhead that each time in the loop it takes 1-2 seconds to create the task.
Hi Guys The problem is... When i try to bulk insert a single file its working fine. When i want to loop a set of files in a folder and use Foreach Loop and BulkInsert Task...its failing..
In the flat file connection When i specify usage type as existing file...its loading the same file "n" number of times where n is the number of files in the folder.
When i select usage type as existing folder i get error " Cannot bulk load because the file "....folder" could not be opened. Can someone help me out with this? I have sql 2005 as as separate instance...beside my 2000 which is default
I am using an XML task for validating the XML data against the Schema XSD. I have more XML Files with same the schema. I have to used a for loop container which has an XML task for validate XML. The loop container gets the XML File into variables name "XMLFileName" which the loop current file, in turn, used by XML Task for validation.
XML task is configured in the option "Validate". I have provided the XML Data in variable name "XMLFileName" also get the name from the loop container and XSD file content File Connection. XML Task stored the result in the another variable name "OKFormat". FailOnValidationFail property set to false.
It had the error when I run the package, the error msg as below:
Error: 0xC002F304 at XML Task, XML Task: An error occurred with the following error message: "Data at the root level is invalid. Line 1, position 1.".
Error: 0xC002928F at XML Task, XML Task: Property "New Source" has no source Xml text; Xml Text is either invalid, null or empty string.
Task failed: XML Task
After that, I had to change the source type from Variable to File Connection, and had to test fixed to some xml file it had ok for validate the XML file againt XSD.
I don't know this is the wrong setting or bug of SSIS, anyone can guide me through.
I have a csv file in which I am reading into a recordset destination and want to than use a foreach loop to cycle through those records and do some things. The problem I am having is after defining the variable name of the records set as results, and than going into the foreach loop, choosing collection, using the foreach ado enumerator, i dont see anything in the dropdown under ado object source varable?????? I am new to SSIS but I basically want to parse through this file, change some columns in each line and than either update or insert data in a sql table.
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
We have jobs running successfully on one server. The jobs incluce a send mail step as one of the steps. We migrated the DB to a new server. I also migrated the jobs. Now the job is failing. We are getting error with the send mail task. The error says the stored procedure 'master.dbo.xp_smtp_sendmail' could not be found. I am not sure what is the problem. Please advise.
I have a task to send mail when the source file contains null values against id column.
I have set conditional split to split the null value rows to the different destination.Please help me how do i achieve this task when the source file contains null values against id column.
Well I thought it should be easier but send mail task supports only windows authentication but i want to give different user id/password, is there any other way to do it except script?
I am trying to use Send Mail Task to send an email.
In my package all that I have is a Send Mail Task
Settings:
General: Name: Send Mail Task Description: Send Mail Task
Mail: SmtpConnection: SMTP Connection Manager From: awm@company.com To: awm@company.com Cc: Blank BCc: Blank Subject: None MessageSourceType: Direct Input MessageSource: Testing Priority: Normal Attachments: Blank
Expressions: Misc - Expression: Blank
SMTP Connection Manager Editor Connection manager Information Name: SMTP Connection Manager SMTP Server: Tried both IP address and SMTP server name (mail.company.com) Checked both windows authentication and SSL
Its simple I want my package to send an email. but it fails aagain and again.
Task Send Mail Task Validation has started (2) Validation is completed (2) Start, 1:31:22 PM Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed Finished, 1:31:43 PM, Elapsed time: 00:00:21.359 Validation is completed Start, 1:31:22 PM Warning: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. Finished, 1:31:43 PM, Elapsed time: 00:00:21.359
I was trying to add a send mail task at the end of myPackage. When i run package, the send mail task alone fails but the rest of the package works out fine. the error i got goes like this....
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
could anyone tell me how to get around this? also tell me how shud i add a send mail task so that i can check myself if i went wrong somewhere when i added it to my package.
Does anyone know how to change the task name displayed within a ForEach Loop Container (or of the ForEach Loop Container task itself) based on a variable. I am pretty familiar with setting variable values during task execution and using expressions to alter task properties based on variables. I have tried using an expression to alter the value of the Name property of the ForEach Loop Container but the name of the ForEach Loop Container does not change during execution. Since the color of the various tasks change during execution, I would think that the task names could be changed as well.
I have a package that runs fine by itself. But when I run it inside a Foreach Loop container on a parent package, I got a buffer error after a few loops. Here are a couple of the error lines:
A buffer failed while allocating 49085616 bytes.
The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
I already played around with the Data Flow task€™s DefaultBufferMaxRows and DefaultBufferSize properties, and I am still getting the error. Just wondering if there is a memory leak or something with the Foreach Loop task. I haven€™t install SP1. Maybe SP1 fixes this issue?
I have an Execute SQL Task that reads columns as strings but can be null. I feed the information in the result set to a foreach loop container and when nulls are encountered the package dies there. Is there an easy way to deal with this other. I have changed all of my null possible columns to object types but I don't want to do this for all of the possible null columns.
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
