Sending SMS From Sql Server 2005
Jun 18, 2008Hi
How can i send sms to mobile phone from sql server 2005.
Is it possible!
Regards
Js.Reddy
ADVERTISEMENT
Sending Message With Sql Server 2005
May 3, 2006I have a need to asynchronously send a short message to an application over
tcp/ip after the user makes a selection from a web browser.
We are developing a reservation system where the availability to users in
close physical proximity is indicated by lights at a kiosk. We want the user
to be able to make a reservation from a web browser over the internet, (which
checks the sql server db for availibility), and when the reservation is made,
the appropriate lights at the kiosk indicate it is unavailable.
I can think of three choices, but am unsure which is best:
1. Poll the server to look for the event. I don't like this since the
application will be connected over a dial up internet connection, and I want
to keep traffic to a minimum, although this seems the easiest to build.
2. Have the users web browser be redirected to the application's ip address
directly. Here I am not sure which message protocol to use. The kiosk
application will be a .net 2.0 windows form app, but not running on a server
per se, but windows xp pro.
3. Have the database relay a message to the kiosk. I like this way the best,
since the user does not need to know the ip address of the kiosk, and the
kiosk does not need to be open from all ip addresses for security reasons. I
am not which way to do this either. I have read a little about hosting web
services using http.sys, but we probably want a shared hosting plan due to
costs at this point, and they are restrictive about turning on the clr inside
the db. Is there a different way to send a short message?
I apologize in advance if this is the wrong forum.
Sending Mails Through SQL Server 2005
Aug 1, 2007
Hi,
I have a need to shoot and automated mail at regular intervals to clients. I got the following code for sending email from SQL Server but get an error.
ALTER PROCEDURE [dbo].[sp_SMTPMail]
@SenderName varchar(100),
@SenderAddress varchar(100),
@RecipientName varchar(100),
@RecipientAddress varchar(100),
@Subject varchar(200),
@Body varchar(8000),
@MailServer varchar(100) = 'localhost'
AS
SET nocount on
declare @oMail int --Object reference
declare @resultcode int
EXEC @resultcode = sp_OACreate 'SMTPsvg.Mailer', @oMail OUT
if @resultcode = 0
BEGIN
EXEC @resultcode = sp_OASetProperty @oMail, 'RemoteHost', @mailserver
EXEC @resultcode = sp_OASetProperty @oMail, 'FromName', @SenderName
EXEC @resultcode = sp_OASetProperty @oMail, 'FromAddress', @SenderAddress
EXEC @resultcode = sp_OAMethod @oMail, 'AddRecipient', NULL, @RecipientName, @RecipientAddress
EXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @Subject
EXEC @resultcode = sp_OASetProperty @oMail, 'BodyText', @Body
EXEC @resultcode = sp_OAMethod @oMail, 'SendMail', NULL
EXEC sp_OADestroy @oMail
END
SET nocount off
The error is
SQL Server blocked access to procedure 'sys.sp_OACreate' of component 'Ole Automation Procedures' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface Area Configuration" in SQL Server Books Online.
Can any one help me please
Sending Emails Throught DTS Packages In Sql Server 2005
Jan 23, 2007Hai,
I am working on the DTS Package in SQL Server 2005 , actaully the DTA Packages Use OutLook to Send the email to the Mailing List , now that Out Look Stuff is not working Fine , soo I came to know that we can use Sp_send_dbMail stored Procedure insteds of Outlook , i am trying to do that my Email contains the attaachment to the Text file from the shared Folder.
I am not Getting the Correct Help when i am trying .
So can some one Helpe Providind Some examples and suggetions .
Thanks
Sending Email On Some Specific Event (was Sql Server 2005)
Apr 19, 2007Hi,
I need a help from you all on Sending Email on some specific event from SQL SERVER 2005. Any Idea how Do I proceed?
Any help will be appreciated.....
Thanks,
Rahul Jha
SSRS 2005 Failure Sending Email: The Server Rejected The Sender Address
Aug 8, 2006I have subscription by email problem on the following configuration:
Windows XP prof.
SQL Server 2005 Enterprise
Configured Database Mail with remote SMTP server to send email successfully
Configured SSRS to use remote SMTP server
Edited the Rsreportserver.config file as following (by the instructions from MSDN)
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>smtp.broadband.rogers.com</SMTPServer>
<SMTPServerPort>25</SMTPServerPort>
<SMTPAccountName></SMTPAccountName>
<SMTPConnectionTimeout></SMTPConnectionTimeout>
<SMTPServerPickupDirectory></SMTPServerPickupDirectory>
<SMTPUseSSL></SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>0</SMTPAuthenticate>
<From>My email Address</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
I scheduled my subscription and tested it. I didn't receive any mail from the setting email address, but got an error message in ReportServerService log file as following.
Error sending mail, CDO error -2147220978, will not resend
Error sending email. System.Runtime.InteropServices.COMException (0x8004020E): The server rejected the sender address. The server response was: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I did a little search, but couldn't find any solution for it. Is anybody successfully to get the Reporting Services subscription by email function working through MS SQL Server Management Studio or if you have a solution for this issue, would you mind to share the experience with me. I will be very appreciated.
Sending Uploaded Image To Data Access Class When Storing Image In SQL Server 2005
Apr 20, 2007I am using the 3-tiered architecture design (presentation, business laws, and data acess layers). I am stuck on how to send the image the user selects in the upload file control to the BLL and then to the DAL because the DAL does all the inserts into the database. I would like to be able to check the file type in the BLL to make sure the file being uploaded is indeed a picture. Is there a way I can send the location of the file to the BLL, check the filetype, then upload the file and have the DAL insert the image into the database? I have seen examples where people use streams to upload the file directly from their presentation layer, but I would like to keep everything seperated in the three classes if possible. I also wasn't sure what variable type the image would be in the function in the BLL that receive the image from the PL. If there are any examples or tips anyone can give me that would be appreciated.
View 2 Replies View RelatedSending Data From SQL 2005 To And From C# Code
May 3, 2006Hi
Background: I am a post-graduate student developing a model of the way HIV/AIDS spreads in communities. The data sets I am using are large (eg census data - 50m records) and the manipulation is complex (eg deciding which individuals will begin a sexual partnership, and with whom).
Problem: I need to process a table of data in code written in C# that will insert the results which are also a table of data into a table in the database.
In the example set up below, a table with rows comprising an Integer and a Real is the input. The output is a table where each row also comprises an Integer and a Real. Each row of input, say (Inti, Reali) leads to Inti rows of output. The example below gives a simple example of this.
The T-SQL code below sets up the problem, and includes simplest possible T-SQL that would lead to the requisite Output, so that you could compare your solution's code's with it:
-- Set up tables to use in example
CREATE TABLE InputTable
(
Int1 INT NOT NULL,
Real1 REAL NOT NULL
)
GO
CREATE TABLE OutputTable
(
Int1 INT NOT NULL,
Real1 REAL NOT NULL
)
GO
--Initialise the Input Table
INSERT INTO InputTable (Int1, Real1) VALUES (3, 0.5)
INSERT INTO InputTable (Int1, Real1) VALUES (5, 0.99)
--Manually put Data into Output table
--I do know how to code this in T-SQL using cursors and loops
--I wish to code this part in CLR
INSERT INTO OutputTable (Int1, Real1) VALUES (1, 0.5)
INSERT INTO OutputTable (Int1, Real1) VALUES (2, 0.5)
INSERT INTO OutputTable (Int1, Real1) VALUES (3, 0.5)
INSERT INTO OutputTable (Int1, Real1) VALUES (1, 0.99)
INSERT INTO OutputTable (Int1, Real1) VALUES (2, 0.99)
INSERT INTO OutputTable (Int1, Real1) VALUES (3, 0.99)
INSERT INTO OutputTable (Int1, Real1) VALUES (4, 0.99)
INSERT INTO OutputTable (Int1, Real1) VALUES (5, 0.99)
--This should show the output
SELECT * FROM InputTable
SELECT * FROM OutputTable
--The output should be
Int1Real1
3 0.5
5 0.99
Int1Real1
1 0.5
2 0.5
3 0.5
1 0.99
2 0.99
3 0.99
4 0.99
5 0.99
Additional Information: I would be grateful if your solution could indicate
* whether the code to be written is a class, stored procedure or user-defined function
* the answer could be included in entirity begining with "using system..."
* example T-SQL that can be used to execute the code
Current knowledge:I can write T-Sql. I have written C# user defined functions and stored procedures, assembled them and run them from within SQL-Server 2005.
Thanks in advance.
Greg
Sending SQL 2005 Dbmail When Using Application Role
Jan 16, 2007I am attempting to use dbmail from an application that logs in to my database using an application role. Since the application role does not exist outside the database, I created an spSendEmail in the database with "execute as login='mailagent'" in it: I set the database to trustworthy, created a 'mailagent' account and added it to the msdb database with the databasemailuser role rights.
Email works just fine on the server when I use the execute as login='mailagent' to fire off the msdb..sp_send_dbmail. But from the .NET application, I get the error: "Cannot execute as the server principal because the principal 'mailagent' does not exist, this type of principal cannot be impersonated, or you do not have permission." When I run my spSendEmail stored procedure from the calling database, I get the same error.
Customizing The From Address When Sending Emails From SQL 2005
Dec 17, 2007We have the need to be able to send emails from our SQL 2005 server with the from address field determined at run time from a table. What are my options? We are running a clustered SQL 2005 x64 standard edition on Win 2003 Enterprise x64.
1. Database Mail - with all the hoopla about how nice it is to have a proper SMTP mailer in SQL, it still seems to lack this functionailty. IMHO a HUGE miss.
2. sp_send_cdosysmail - We used this when we had a SQL 2000 on W2K and it worked just fine. On our current environment, the stored procedure works for a period of time and then suddenly and out of no where we see this message in its log files:
CDO.Configuration.1 - A dynamic link library (DLL) initialization routine failed. sp_OAGetErrorInfo for sp_OASetPropery sendusing
After which no emails are sent until I restart the SQL Server service. We have tried both the sendusing method of 1 (local pickup) as well as 2 (remote SMTP server) and both are exhibiting the same behavior.
What other options do we have?
Alex.
Sending Sql 2005 Table Back To DB2 AS400
Apr 10, 2008I am trying to send a file from SQL 2005 back to our AS400 DB2 db. First time trying to get this to work in SSIS.
I have a couple fields that are datetime in SQL Server and see SQL server sees datetime fields from DB2 as string so I am converting them to Strings using derived columns. That part seems to work fine. Get no errors on that part.
The conversions seem like they are working but it is faling when it tries to send it to as/400. I get the following error: any ideas on what is wrong?
[OLE DB Destination [1569]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5029: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ". An OLE DB record is available. Source: "IBMDA400 File Rowset" Hresult: 0x80004005 Description: "CPF5035: Data mapping error on member DSSCNTL. ".
I even created a sql table with same field sizes as one I am sending to AS400 and its sucessful there. So seem like it mght have somthing to do with sending to AS400 but not sure what.
Any ideas?
Stacy
Sending MIME Messages Using Database Mail In Sql 2005
May 8, 2008
Hello, I've been banging my head trying to figure this one out so I appreciate any help you guys can provide.
I've setup and configured SQL 2005's Database mail and have sent a few plain and simple text emails and I receive it fine at the destination.
I now want to send mime messages but I'm not sure what I'm doing wrong. I took the following source from an email that linked-in sent me which was a mime message:
"
Mime-Version: 1.0
Content-Type: multipart/alternative;
boundary='----=_Part_434343432'
------=_Part_434343432
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Plain Text Goes Here
------=_Part_434343432
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 7bit
<html>
<body>
<b>HTML Goes here</b>
</body>
</html>
------=_Part_434343432--
"
and put the above text in the @body parameter of the stored proc msdb.dbo.sp_send_dbmail and submitted it.
When I received the email, it didn't appear as html. Instead, I just got the mime message above as plain text in my email as if someone just typed it and sent it to me. What do I need to do for SQL Database Mail to send the above as a MIME message?
Thanks in advance for any help
SSRS 2005 Failure Sending Mail: Interface Not Registered
Oct 19, 2007
Hi all,
We receive this error from all subscriptons on this server. Any advice?
Error: "Failure sending mail: Interface not registered "
Thank you,
-Randy
Sending Mail Through SQL Server
May 9, 2001I need help regarding how to send mails through SQL server. Let me give you some more details: I am having a table where in all the e-mail id's are stored so i need to write a stored procedure that will pick up the email id from the table and it has to send the mail once you run the stored procedure.
Any help in this regard will really help...pls help me out...
Sending Email From SQL Server
Nov 29, 2000Does anyone know how to send emails from within a trigger without the use of a mail server. I know that xp_sendmail can be used if a mail server, such as MS Exchange Server is available and SQL Server is set up as an e-mail client. However is there a way to send mail to the outside world without the use of a mail server? (Perhaps there is a third party product or extended stored procedure that can give me this ability?)
Many thanks for any response.
Sending Mail From Sql Server?
Jun 11, 2007Hi,
i want to send Mail from sql server.which means that when i execute an query a mail will send to mentioned e-mail.is it any predefined function is there?.if,yes,can u explain Detail.
Regards
Umapathy
Sending Email From Sql Server
Jul 20, 2005HiTrying to send email from sql server seems a very hard task, can iteven be done without using exchange? all examples I can find relies onexchange but I would rather send it to any SMTP server since we do notuse exchange.rgdsMatt
View 2 Replies View RelatedSending Large Binary To SQL Server Via ADO.NET
Feb 27, 2007Hi,I am having some trouble with my ASP page sending a file to a SQL Server 2005 database running on another machine. An exception is generated as follows:A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) It seems to work ok with smaller files, but when I attempt to upload a 11MB file, it gives me the above exception. I upped the httpRuntime maxRequestLength in the web.config to 2048. Any Ideas? Here is my code:1 if (FileUploader.HasFile)
2 {
3
4 // call the stored proc
5 SqlConnection conn = new SqlConnection();
6 conn.ConnectionString = "Password=password;Persist Security Info=True;User ID=MyUser;Initial Catalog=MyDb;Data Source=MySqlServerMachine;Connect Timeout=300";
7 conn.Open();
8
9 SqlCommand cmd = new SqlCommand();
10 cmd.Connection = conn;
11 cmd.CommandType = CommandType.StoredProcedure;
12 cmd.CommandText = "spAddTestBinary";
13
14 SqlParameter param = new SqlParameter();
15 param.ParameterName = "@binaryParam";
16 param.SqlDbType = SqlDbType.VarBinary;
17 param.Direction = ParameterDirection.Input;
18 param.Value = FileUploader.FileBytes;
19 cmd.Parameters.Add(param);
20
21
22 cmd.ExecuteNonQuery();
23
24
25 conn.Close();
26 }
Here is my table:1 BinaryTable(
2 [id] [int] IDENTITY(1,1) NOT NULL,
3 [myBinary] [varbinary](max) NULL,
4 CONSTRAINT [PK_BinaryTable] PRIMARY KEY CLUSTERED
5 (
6 [id] ASC
7 )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
8 ) ON [PRIMARY]
My stored proc:1 ALTER PROCEDURE [dbo].[spAddTestBinary]
2 -- Add the parameters for the stored procedure here
3 @binaryParam varbinary(MAX)
4 AS
5 BEGIN
6 -- SET NOCOUNT ON added to prevent extra result sets from
7 -- interfering with SELECT statements.
8 SET NOCOUNT ON;
9
10 -- Insert statements for procedure here
11 Insert into BinaryTable
12 (myBinary)
13 Values
14 (
15 @binaryParam
16 )
17 END
Sending An E-mail Via SMTP In SQL Server
Jul 20, 2005Hello,Does anyone know how I can set SQL Server up so that after it hascompleted a backup sucessfully it will send the completion report toan e-mail address via SMTP.Unfortunatly we cannot install MS OUTLOOK Express or similar.Is this possible?Many thanks in advance,Allan Martin
View 2 Replies View RelatedSending Mail Using SQL Server 2000
Dec 19, 2007Hello Friends
I want to send mail using Stored Procedure using SQL Server 2000 using windows smtp component. I don't want third party component.
can any body send Stored Procedure.
Help With Sending File To Server Using Ftp Task
Aug 28, 2006
Doe anyone know how to do this. I keep getting an error remote path missing "/" but it doesn't contain a "/".
Mike
Sending Out Calendaring Event From SQL Server
Jan 21, 2008Hello, I have a table in SQL Server that is used to track appointments. Is
there some way to take this data and send an email to user with the
appointment, when the user clicks on the email it would create the event in
the user or public calendar.
Thanks
Error In Sending Out-of-band Data To SQL Server.
May 17, 2008
First, yes I know that DB Library is depreciated. Unfortunately it isn't an option for us to make a huge change like that right now.
Now, on to the problem. We have a few different C applications that access SQL Server via db-lib. On SQL 6.5, and SQL2000 we had no issues to speak of. Since upgrading to SQL2005 (Enterprise Edition, 32 bit), we have had a horrible time with receiving an error that says "Error msg: Possible network error: Error in sending out-of-band data to SQL Server. General network error.". It appears to happen at somewhat random times during the applications run.
Search for information on "Error msg: Possible network error: Error in sending out-of-band data to SQL Server. General network error." has provided next to nothing, so I turn to you. Any ideas?
Thanks,
Matt
SQL Server 2012 :: Sending Email Through Store Procedure?
Jan 28, 2015I have below code to send email in HTML table format with store procedure. from my
Database = "CreditControl"
Table = "Testing$"
and code as below
DECLARE @bodyMsg nvarchar(max)
DECLARE @subject nvarchar(max)
DECLARE @tableHTML nvarchar(max)
DECLARE @recipients nvarchar(max)
DECLARE @profile_name nvarchar(max)
[code]....
SQL Server 2014 :: Trigger A Report By Sending Email
Oct 18, 2015I have a report that gets a Customer_Number parameter and sends a mail with that customer's data.I want my users to be able to get this report's results by sending an email to a certain email address with a customer number in the topic.
View 1 Replies View RelatedA Transport-level Error Has Occurred When Sending The Request To The Server.
Sep 27, 2007Hi,
A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
I am using a direct connection from my Gridview to perform a huge database search. the stored procedure will take 10- 60 seconds to execute the query.
What the problem i am facing is when the sp takes long time (more than 1 minutes), then when i try any other operation like calling another sp frm another page, i am getting the above specified error.
Anybody can tell why is it happening?
here my code snippet goes
<asp:GridView ID="searchGV" runat="server" AllowPaging="True" AllowSorting="True"
BorderColor="#999999" BorderStyle="None" CellPadding="3" Width="100%" AutoGenerateColumns="False" DataSourceID="searchObj" DataKeyNames="Recordnumber" OnDataBound="searchGV_DataBound" OnPageIndexChanged="searchGV_PageIndexChanged">
<RowStyle CssClass="gridRow" />
<PagerStyle HorizontalAlign="Center" BackColor="#999999" ForeColor="Black" />
<HeaderStyle CssClass="gridHeader" />
<AlternatingRowStyle CssClass="gridAlternateRow" />
<Columns>
<asp:TemplateField HeaderText="All">
<HeaderTemplate>
<asp:CheckBox ID="chkid" AutoPostBack="true" OnCheckedChanged ="OnCheckChangedEvent" runat="server" />
</HeaderTemplate>
<EditItemTemplate>
<asp:CheckBox ID="chkSelect" runat="server" />
</EditItemTemplate>
<ItemTemplate>
<asp:CheckBox ID="chkSelect" runat="server"/>
</ItemTemplate>
<ControlStyle Height="18px" Width="15px" />
<ItemStyle Width="5px" />
</asp:TemplateField>
<asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title">
<ItemStyle Width="150px" />
</asp:BoundField>
<asp:BoundField DataField="Artist" HeaderText="Artist(s)" SortExpression="Artist"/>
<asp:BoundField DataField="Album" HeaderText="Album" SortExpression="Album"/>
<asp:BoundField DataField="Writer" HeaderText="Writer(s)" SortExpression="Writer" ><ItemStyle Width="150px" /></asp:BoundField>
<asp:BoundField DataField="ISRC" HeaderText="ISRC" SortExpression="ISRC" />
<asp:BoundField DataField="UPC" HeaderText="UPC" SortExpression="UPC"/>
<asp:BoundField DataField="PLineLabel" HeaderText="P-Line Label" SortExpression="PLineLabel" ><ItemStyle Width="100px" /></asp:BoundField>
<asp:BoundField DataField="DistLabel" HeaderText="Distribution Label" SortExpression="DistLabel" >
<ItemStyle Width="100px" />
</asp:BoundField>
<asp:BoundField DataField="PublishInfo" HeaderText="Publisher(s)" SortExpression="PublishInfo" />
<asp:BoundField DataField="Recordnumber" HeaderText="Record Number" SortExpression="Recordnumber" />
<%-- <asp:BoundField DataField="UID" HeaderText="UID" Visible="false" />--%>
</Columns>
</asp:GridView>
with adapter
<asp:SqlDataSource ID="searchObj" runat="server" SelectCommand="gsp_titleSearchResult" SelectCommandType="StoredProcedure" ConnectionString="<%$ ConnectionStrings:ConnStr %>">
<SelectParameters>
<asp:ControlParameter ControlID="HuserID" PropertyName="Value" Name="Userid" Type="String" Size="50" DefaultValue="" />
<asp:ControlParameter ControlID="Htitle" PropertyName="Value" Name="title" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hartist" PropertyName="Value" Name="artist" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Halbum" PropertyName="Value" Name="album" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hwriter" PropertyName="Value" Name="writer" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hisrc" PropertyName="Value" Name="isrc" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hupc" PropertyName="Value" Name="upc" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hpline" PropertyName="Value" Name="pline" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hdist" PropertyName="Value" Name="distlabel" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="Hpublish" PropertyName="Value" Name="publisher" Type="String" Size="50" DefaultValue=" " />
<asp:ControlParameter ControlID="ReleaseID" PropertyName="Value" Name="Releaseid" Type="Int32" Size="50" DefaultValue="0" />
<asp:ControlParameter ControlID="RecordLabelID" PropertyName="Value" Name="recordlabelid" Type="Int32" Size="50" DefaultValue="0" />
<asp:ControlParameter ControlID="PublisherID" PropertyName="Value" Name="Publisherid" Type="Int32" Size="50" DefaultValue="0" />
<asp:ControlParameter ControlID="ArtistID" PropertyName="Value" Name="Artistid" Type="Int32" Size="50" DefaultValue="0" />
</SelectParameters>
</asp:SqlDataSource>
Advance thanks
Anvar Sadath
Failure Sending Mail: The Transport Lost Its Connection To The Server
May 12, 2006More and more often, I am seeing this error message in RS subscriptions. I would assume it means the IIS server can't connect to the corporate exchange server. However I was wondering if there is some timeout setting/configuration in RS or the IIS server (or any other kind of setting) I can change to help alleviate this problem.
Has anyone else experienced this? Or know how to fix it?
Thanks,
Jeff
UPDATE: After looking closer at the subscriptions, I have noticed that subscriptions set up by a RS Admin (who is also a server admin) seem to be working fine. It is the subscriptions that are set up by ordinary users that are failing...
A Transport-level Error Has Occurred When Sending The Request To The Server
Apr 7, 2006Hi all,
I am new to SQL 2005. I have one issue and it is as follows:
I write a simple query and run it; it works fine.
Now I break the network connection and run the query; in this case it runs fine.
But when I reconnect the network and run the query, then I get an error as follows:
"A transport-level error has occurred when sending the request to the server. (provider: Named Pipes Provider, error: 0 - An unexpected network error occurred.) "
Every thing is local here. So how the network issue comes here?
A Transport-level Error Has Occurred When Sending The Request To The Server
Oct 16, 2006I've tried to search on the web for a solution for this error but i didn't find any working solutions for this problem. We have 2 servers. The first one is the server we use to develop our ASP.NET 2 application. On this server we don't have this error. On the other server (use by our client) we have this error sometime and i don't know why. Both servers have the same configuration and both application have the same web.config file.
I've tried to add a try-catch and retry the query when the error occured. This seems to be working but we don't want to have to change all our connections and since we don't have this problem on the other server we want to find the source of the problem.
Any idea ?
Thanks !
Reporting Services :: Failure Sending Mail - The Transport Failed To Connect To The Server
Jun 25, 2015I am trying to create subscription on report manager.
Getting this error: "Failure sending mail: The transport failed to connect to the server. ".
how to resolve this..
Sending Out An SOS
Apr 1, 2008Thanks in advance...
What I have to do is take orders and generate a report that gives the daily totals of the orders The dates will be on the vertical and the subclass titles on the horizontal: Output
date SO PS Total
1/1/08 5 4 9
1/2/08 3 2 5
1/3/08 5 4 9
mtd 13 10 23
ytd 13 10 23
The SO orders for example can have a diff status each day and I will
need to count this .
1 - how would I pull the orders that I want. I have pulled all credit work orders in but I only want the ones from 2008. Then once I pull them in how do I get the daily info., ie what records fell into the categories for that day. Do I need a loop, cursor, case statement? I also need to count the # of any give group as above. I am new at this and really do not know where to proceed.
see table below
CREATE TABLE #CREDIT_WO (
WO_Noint,
WO_Status varchar (1),
WO_Classvarchar (30),
WO_Subclassvarchar (30),
WO_Create_Datedatetime,
WO_Sch_Datedatetime,
WO_Post_Datedatetime,
WO_Statevarchar (2)
)
INSERT INTO #CREDIT_WO
(WO_NO, WO_Status, WO_Subclass, WO_Create_Date, WO_Sch_Date, WO_Post_Date, WO_State)
SELECT wowo_wono, wowo_status, wtyp_wo_class, wowo_wo_date, wowo_sch_date, wowo_post_date, wowo_state
FROM WO_WO with(nolock)
inner join wo_type with (nolock)
on wowo_wo_type = wtyp_wo_type
WHERE wo_class = 'Credit'
and subclass in ('so', 'ps')
and wowo_wo_date between @Start_date and @End_date
Sending Mail Through SP
Mar 28, 2008I have written a stored procedure which should send mail from the stored procedure in sql server 2005. Here is the SP
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgo
ALTER Procedure [dbo].[sp_SMTPMail]
@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000),@MailServer varchar(100) = 'smtp.mail.tspl.com'
AS
SET nocount on
declare @oMail int --Object referencedeclare @resultcode int
EXEC @resultcode = sp_OACreate 'SMTPsvg.Mailer', @oMail OUT
if @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'RemoteHost', @mailserverEXEC @resultcode = sp_OASetProperty @oMail, 'FromName', @SenderNameEXEC @resultcode = sp_OASetProperty @oMail, 'FromAddress', @SenderAddress
EXEC @resultcode = sp_OAMethod @oMail, 'AddRecipient', NULL, @RecipientName, @RecipientAddress
EXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'BodyText', @Body
EXEC @resultcode = sp_OAMethod @oMail, 'SendMail', NULL
EXEC sp_OADestroy @oMailEND
SET nocount offexec sp_smtpmail 'ramana','venkataramanaiah.uppalapati@tspl.com','rajan','ramana.u@gmail.com','test','This is a sample message'
when i execute the SP by giving the following input parameters like
exec <spname> 'rajan', 'rajan.crp@tspl.com', 'venkat', 'venkat@tspl.com', 'test', 'Test Message'
It ran successfully but the recepient venkat@tspl.com did'nt receive any mail from rajan.crp@tspl.com
I used the following commands for configuring OLE Automation Procedures
exec sp_configure 'Show
Sending Reminders
May 20, 2008Hi all,
In my web application, I need to send reminders to a list of persons in that database to fill out a form , once in every month.
Suppose a person have not filled the form, then agaian afetr 15 days need to send a reminder only to him . And if he doesnt fill it again I need to sned another reminder after 10 days . ...
In one word .. i need to snooze that person who have not complted the form continously and the end of month, even if doesn't complete, I need to tell him tto contact the Admin.
How should I do it in my application. ?
How to schedule a task periodically???
Please Help.
Your Help will be very much Appreciated.
Thanks in advance.