I have developed a B2B Application which is successfully running, now the problem is that my client says that he need a process which sends report of total orders on daily bases.
I am using SQL Server and think that SQL Mail is a good idea, I can find many articles about which needs Outlook for that which is much difficult on the web server. Remember I need to send email only not to receive.
Thanks, any reply will be highly appreciated.
The following SP adds a record to a table. I want to then send an email from within this SP to notify someone that their login is blocked. I can get their email address easily with a simple select but how does the xp_sendmail procedure actually fit in ?? I've tried adding it in just before the raiserror part but it doesn't work ? The raiserror part is used to trigger an alert to notify me but i need to also notify the client. Can anyone see what i am doing wrong please. Many thanks.
CREATE PROCEDURE usp_log_BlockedLogin_ins
@LoginName varchar(50),
@IP_Address varchar(15),
@Failed_Pswd varchar(50)
AS
BEGIN
DECLARE @LoginID int
SET @LoginID = (SELECT fa_loginID FROM tbl_Login WHERE fs_LoginName = @LoginName)
INSERT into tbl_Login_Audit_Trail
(
fi_LoginID,
fs_IP_Address,
fd_DateTime,
fb_Blocked,
fs_Failed_LoginName,
fs_Failed_Password,
fb_FailedAttempt
)
VALUES
(
@LoginID,
@IP_Address,
current_timestamp,
1,
NULL,
@Failed_Pswd,
1
)
END
BEGIN
RAISERROR (50001,10,1) WITH LOG -- this is used to trigger an alert
END
GO
I want to send an email to all the addresses that are contained in a table. I have tried using xp_sendmail, but I just get an error saying that xp_sendmail cannot be found.
Any ideas???
Many Thanks
Ok I am going to try and explain this best as possible.
I have a report that gets everyones name who has not filled in attendance for a class. what they want is when the report is ran an email gets sent out. so I have written the sql to create a temp table that will get the distinct email.... so lets say the table consists of
jacob.ostop@synergit.com
xxxx@yyyy.com
gagsag@shsna.com
what i need to do now is get those three address and add them to a string that would be in the format of
jacob.ostop@synergit.com ; xxxx@yyyy.com ; gagsag@shsna.com
so that i can put that in the TO field of my email.
my problem is that i dont know how to get them each 1 at a time and put in semi colons..
can someone please help me!
My code below works fine when run from my pc (changed all the values forobvious reasons). The code is placed inside a DTS task via VBS scripting.But when I try to run directly from the server where sqlserver is installed,the script fails.I have SMTP running, but there is no outlook installed.Can someone please advise what I am missing.ThanksBobSet objEmail = CreateObject("CDO.Message")objEmail.From = "send@test.com"objEmail.To = "receive@test.com"objEmail.Subject = "TEST SUBJECT"objEmail.AddAttachment "\server est.csv"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "SERVER_NAME"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = "username"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "userpwd"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25objEmail.Configuration.Fields.UpdateobjEmail.Sendset objEmail = nothing
View 3 Replies View RelatedIf SQL is restarted for any reason, I need SQL server to send emails to others letting them know that the server is has restarted once it comes back up.
Is there an Error # that I can build an Alert on? Ideas???
Thank you,
tw
Does anyone know how to send emails from within a trigger without the use of a mail server. I know that xp_sendmail can be used if a mail server, such as MS Exchange Server is available and SQL Server is set up as an e-mail client. However is there a way to send mail to the outside world without the use of a mail server? (Perhaps there is a third party product or extended stored procedure that can give me this ability?)
Many thanks for any response.
Hello,
I would like to send email from Sqlserver 7.0, and I don't have a MS exchange server(I have a smtp server).
Do I need to have MS exchange server and if not, how can I get around this?
Can Outlook express be of any use?
Thanks,
yi
Hi,
I have a table or two in a MS SQL DB. One table has a document name, when it was last uploaded and how often it should be looked at/reviewed.
e.g.
name.doc
01/09/2005
Weekly
1
fish.doc
01/08/2005
Daily
2
Each document is associated with a user (another table) so in the above example 1 and 2 refer to theprimary key of the 'admin' table to get a user.
I want to be able to automatically send an email to users notifying them to check their documents on whatever interval they have set.
I hope this make sense!
JJ
I'm trying to send email through Integration Services (based on when a package has been executed successfully) however I get this error message:
SSIS package "CopyEmailTable.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "CopyEmailTable.dtsx" finished: Success.
Sending email via Mgmt Studio works fine, but not through Integ Services.
Any help in this is greatly appreciated!
Hi. I found this article on 4GuysFromRolla (http://www.4guysfromrolla.com/webtech/tips/t051706-1.shtml) about sending an email when the database is updated. Well, I need to take this example a bit further. We are allowing people to enter their email address on our site to receive email updates on their case. I have all of that working in the database. But I don't know how to modify their example to loop through a listing of email addresses who want to receive an email when the case has been updated. Does anybody know how I can accomplish this? Thanks for all your help!
View 1 Replies View Relatedi'm using
EXEC @hr = sp_OASetProperty @object, 'HTMLBody', 'some text'
for sending email from my sql sever.
how can i make my content dynamic. So instead of 'some text' i would like to have data (results) from database; eg.: select * from table1.
is this possible anyhow?
thank you in advance
Follow-up to my original post.Is it possible for the "objEmail.To" to lookup the values from a sqlservertable?At the moment, I type the email address separated by a semi-colon.TIA~Set objEmail = CreateObject("CDO.Message")objEmail.From = "send@test.com"objEmail.To = "receive@test.com"objEmail.Subject = "TEST SUBJECT"objEmail.AddAttachment "\server est.csv"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "SERVER_NAME"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = "username"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "userpwd"objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25objEmail.Configuration.Fields.UpdateobjEmail.Sendset objEmail = nothing
View 1 Replies View RelatedHiTrying to send email from sql server seems a very hard task, can iteven be done without using exchange? all examples I can find relies onexchange but I would rather send it to any SMTP server since we do notuse exchange.rgdsMatt
View 2 Replies View RelatedI have a website that I want to put a contact form on so I can allow users to send emails from it. I have SQL Server as my db but my hosting co. won't allow me to use the Database Mail procedure to send emails (msdb.dbo.sp_send_dbmail I think it's called).
I will have to write my own procedure to do it instead. Can anyone point me in the direction of some good resources where I might get some info on how to do this?
Hi,
I have done some fairly basic things with SSIS before, but I have now got a requirement where I need to send an email to a particular email address if a table (NewSubjects) has any data in it, can anyone give me any pointers on how I can achieve this with SSIS.
Thanks,
Gavin,
When I used the following code:
Imports System
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Net.Mail
Imports System.Net
Imports System.Data
Imports System.IO
Imports Microsoft.SqlServer.Dts.Pipeline
Imports System.Text
Public Class ScriptMain
Public Sub Main()
Dim msg As MailMessage
Dim smtp As SmtpClient
Dim dt As Data.tbl_clients
Dim ad As New Data.OleDb.OleDbDataAdapter
dt = New System.Data.tbl_clients
ad.Fill(dt, Dts.Variables("User::AllFilesFound").Value)
Dim data As String
For Each row As Data.DataRow In dt.Rows
For Each column As Data.DataColumn In dt.Columns
data = data & (column.StaffNo & " : " & row(column.Ordinal).ToString()) & "<br>"
Next
Next
Dim sendNotify As String
sendNotify = "<pre>Cards to be printed " & Today() & " : <br><br>" & data.ToString() & ""
msg = New MailMessage( _
"my email", _
"my email again", _
"Subject: Cards to be printed", sendNotify)
smtp = New SmtpClient("smtp client")
smtp.Credentials = CredentialCache.DefaultNetworkCredentials
msg.IsBodyHtml = True
smtp.Send(msg)
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I got the following error:
The query failed to parse. An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Add a name or single space as the alias name.
I would like to send an email notification after data has been imported into the table. Any response will be highly appreciated.
Many thanks,
Rupa
Hi All
I just wondered that now SQL Mail is classed as a legacy solution for email, does anyone know how to set up Notification Services to send email once a job has completed e.g. Backup or reindex?
I have tried to find a tutorial but with no joy so far!
Thanks
Gopher
I'm not a newbie, but I've not been able to find out how to do thisparticular task, and BOL isn't being too cooperative.My application sits on a SQL Server backend (SQL Server 2000).The application is a Document Distribution system. Some subscribershave elected to be notified by e-mail that a new revision of a documentis available.I want to run a daily job that would search for new revisions and emailany electronic subscribers. Pseudo code example:DECLARE MailList CURSOR FORSELECTEMailAddressFROMCustomersINNER JOIN DocumentDistribution ONCustomers.CustomerID = DocumentDistribution.CustomerIDWHEREDocumentDistribution.DocumentID = @DocumentID ANDCustomers.EMailEnabled = 1OPEN MailListFETCH NEXT FROM MailListWHILE @@FETCH_STATUS = 0BEGIN/* Format and send the email to the customer here */FETCH NEXT FROM MailListENDCLOSE MailListDEALLOCATE MailListWhat do I need to do on the server to make this work?Many thanks in advanceEdward--The reading group's reading group:http://www.bookgroup.org.uk
View 1 Replies View Related
Hi,
I am new to reporting services. I am currently on the maintenance of few reports that are developed.
Any subscribed report I attempt to deliver via email is failing with a strange error.
"Failure sending mail: The report server has encountered a configuration error. See the report server log files for more information."
I am not able to understand where this log file is stored..where can I find this? Please let me know.. and if someone has faced this error before then what could be the reason? I am using SQL Server 2005 on Windows Server 2003 R2 standard edition.
Cheers
Abhi..
Hi,
I have define an "execute SQL task" followed by an "Send Email Task" :
http://img171.imageshack.us/img171/449/pic562qn9.gif
http://img171.imageshack.us/img171/1793/pic564jo2.gif
I want to include the package name that is being executed in the message body of the email, How can i do this ?
I have tried to set an output parameter with Variable Name "System:ackageName", but i get the message :
Variable "System:ackageName" cannot be used as an out parameter or return value in a parameter or return value in parameter ....
Hi All,
I need some help in configure our SQL 2K & 2K5 servers to send notification on job failers. Have created operators on SQL 2k but when i try to do a test mail it fails saying mai session is not running. I go to properties of the Sql agent to turn on mail session but it is grayed out. Can someone please direct me to the steps I need to take when setting up sql server with email capability. Do I have to install office (outlook on the sql server box) in order for emailing to work?
Thanks in advance for your help.
Nats
Hi Guys,
Whats the best way to send a small query result using Send Email Task. I have log table not more then 50 rows with 3 columns I need to query this table and send email.
I tried using Exe SQL Task and in result set I tried to store in variable so that I can attached that variable as email source. I think query result I can't store in string variable like this. Any simple way?
Thank you - Ashok
We have a ASP.Net 2.0 web application and need to send out emails. We have an EmailQueue table in our database where email gets stored before it is send out. We are looking at the pros and cons of using Database Mail in SQL Server 2005 to send out our emails. Should we use SQL or our web app to send email???Tips, tricks, articles, experiences, opinions are greatly appreciated. Newbie
View 2 Replies View RelatedHi there,
I am wondering if the following is possible.
I would like to have a scheduled job that would check every day a date field of every record (on a specific table). If that date correspond to today then I would like to send an email with the information of that record.
Is this possible?
Btw if I mentionned Job Scheduling it's because I don't know if there is other ways available for such purpose, so if you think of an other way please let me know.
HI,
Does any one know how I could send all the alerts, email notifications from the SQL Server to my Sprint PCS Phone. Is there any software for that. I know that it can be done by MSN mobile. Just checking whether it can be directly sent to my phone rather than going to hotmail which is then forwared to my cell phone. Let me know.
Thanks,
Cinday
I am getting this error when sending an excel file via email.
Failure sending mail: The Report Server has encountered a configuration error; more details in the log files
The scheduled job which emails an excel spreadsheet has been working and now it doesn't. I've done some research and this KB article is close to the error that I'm seeing however the win 32 error 87 is different. http://support.microsoft.com/?kbid=842423
Has anyone any idea's? I have not applied the hotfix for SSRS 2000 sp2.
Log file has this.
ReportingServicesService!library!7b4!09/28/2006-15:00:08:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files, AuthzInitializeContextFromSid: Win32 error: 87;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files
ReportingServicesService!library!7b4!09/28/2006-15:00:08:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!emailextension!7b4!09/28/2006-15:00:08:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The Report Server has encountered a configuration error; more details in the log files ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files
at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml, ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyDate)
at Microsoft.ReportingServices.Library.RSService._GetReportParameters(String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobTypeEnum type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.ConstructMessageBody(IMessage message, Notification notification, SubscriptionData data)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
We have a DTS package that sends smtp email from an ActiveX script task. The body of the emails are in template files that we read in and then replace values relating to the customer.
I am looking for suggestions of handling this process from an SSIS package. This is what our existing code does.
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main()
'********************************************************************************************
' Email results
'********************************************************************************************
Dim oRS, objMessage, fTemplate
Set fso = CreateObject("Scripting.FileSystemObject")
Set oRS =DTSGlobalVariables("ToBeNotified").Value
oRS.MoveFirst
Do While NOT oRS.EOF
Set objMessage = CreateObject("CDO.Message")
Set objMessage2 = CreateObject("CDO.Message")
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
'Name or IP of Remote SMTP Server
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = DTSGlobalVariables("RemoteSMTPServer").Value
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = DTSGlobalVariables("RemoteSMTPServer").Value
'Server port (typically 25)
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
'Type of authentication, NONE, Basic (Base64 encoded), NTLM
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
'Your UserID on the SMTP server
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = "CustomerService"
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = "CustomerService"
'Your password on the SMTP server
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "cslogin"
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "cspassword"
objMessage.Configuration.Fields.Update
objMessage2.Configuration.Fields.Update
objMessage.Sender = DTSGlobalVariables("EmailFrom").Value
objMessage2.Sender = DTSGlobalVariables("EmailFrom").Value
objMessage.From = DTSGlobalVariables("EmailFrom").Value
objMessage2.From = DTSGlobalVariables("EmailFrom").Value
objMessage.To = oRS.Fields("ContactEmail").value
' objMessage.To = "me@ourmail.com"
objMessage2.To = DTSGlobalVariables("EmailBCC").Value
' objMessage2.To = "me@ourmail.com"
If oRS.Fields("Rejected").value = 1 Then
'Rejection Message
objMessage.Subject = "electronic request notification"
If oRS.Fields("ProductType").value = "Fixed" Then
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateRejectedFixed").Value)
Else
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateRejectedVariable").Value)
End If
Else
'Successful results
objMessage.Subject = "electronic confirmation #" + CSTR(oRS.Fields("ConfirmationId").value)
objMessage2.Subject = "Customer request for hard copy of contract"
'Add Terms and Conditons document
termDocument = DTSGlobalVariables("TermDocumentsRepository").Value + CSTR(oRS.Fields("TermDocument").Value) + ".pdf"
If fso.FileExists(termDocument) Then
objMessage.AddAttachment termDocument
objMessage2.AddAttachment termDocument
End If
If oRS.Fields("ProductType").value = "Fixed" Then
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateSuccessFixed").Value)
Else
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateSuccessVariable").Value)
End If
End If
htmlText = htmlTextStream.ReadAll
htmlText = Replace( htmlText , "[OurLogo]" , DTSGlobalVariables("EmailLogo").Value)
htmlText = Replace( htmlText , "[CustomerName]" , oRS.Fields("ContactFirstName").value + " " + oRS.Fields("ContactLastName").value)
If oRS.Fields("Rejected").value = 0 Then
htmlText = Replace( htmlText , "[ConfirmNumber]" , oRS.Fields("ConfirmationId").value)
htmlText = Replace( htmlText , "[OrderDate]" , oRS.Fields("SalesDate").value)
htmlText = Replace( htmlText , "[ProductName]" , oRS.Fields("ProductType").value)
htmlText = Replace( htmlText , "[Months]" , oRS.Fields("TermMonths").value)
htmlText = Replace( htmlText , "[Price]" , oRS.Fields("SalesPrice").value)
htmlText = Replace( htmlText , "[Units]" , oRS.Fields("SalesPriceUnit").value)
htmlText = Replace( htmlText , "[StartDate]" , oRS.Fields("FlowStartDate").value)
htmlText = Replace( htmlText , "[AccountNumber]" , oRS.Fields("AccountNumber").value)
End If
objMessage.HTMLBody = htmlText
objMessage2.HTMLBody = htmlText
objMessage.Send
If oRS.Fields("SendHardCopy").value = True AND oRS.Fields("Rejected").value = 0 Then
' Attach Instructions for Hard Copy delivery
instructionDocument = DTSGlobalVariables("TermDocumentsRepository").Value + "Instructions.txt"
set file = fso.CreateTextFile(instructionDocument, true)
file.WriteLine("The customer has requested a hard copy of their contract to be sent to them.")
file.WriteLine("")
file.WriteLine("Instructions:")
file.WriteLine("1) Print the email")
file.WriteLine("2) Print the attached Terms & Conditions document")
file.WriteLine("3) Mail both items to the address below")
file.WriteLine("")
file.WriteLine("Customer Address:")
file.WriteLine(oRS.Fields("ContactFirstName").value + " " + oRS.Fields("ContactLastName").value)
file.WriteLine(oRS.Fields("BillingAddress1").value)
If oRS.Fields("BillingAddress2").value <> "" Then
file.WriteLine(oRS.Fields("BillingAddress2").value)
End If
file.WriteLine(oRS.Fields("BillingCity").value + ", " + oRS.Fields("BillingState").value + " " +oRS.Fields("BillingZip").value)
file.Close
set file=nothing
objMessage2.AddAttachment instructionDocument
fso.DeleteFile(instructionDocument)
objMessage2.Send
End If
set objMessage = nothing
set objMessage2 = nothing
oRS.MoveNext
Loop
Main = DTSTaskExecResult_Success
End Function
All suggestions are appreciated.
SK
I have a DTS package that I'm moving over to SSIS. In place of migrating this package, I've choosen to recreate it. This package moves data from an Informix database to a SQL database.
In the old package the first task was to make a simple connection to the Informix database and if the task failed, it would send an email and stop the package.
The biggest reason for this is because the Unix server that I'm getting the Informix data from forces the user passwords to be reset ever 90 days. So in my old package, if I forgot to change the password and the connection started to fail it would send me an email.
In my new package, SSIS performs a validation before starting. There are a number of task that uses the connection to the Informix database. Under testing, if I put in a bad password, the validation process generates a validation error. I've tried catching this validation error using the Error Handling events but I've had no luck. I can send out errors PreValidation and PostValidation but OnError appears not to fire under a validation error.
Might anyone have any suggestions on a proper way to validate and be able to send out email notification if a connection fails? Any assistance would be appreciated.
Hi,
I need a help from you all on Sending Email on some specific event from SQL SERVER 2005. Any Idea how Do I proceed?
Any help will be appreciated.....
Thanks,
Rahul Jha
hi there,
the subject line says it all. is there a way to send nicely formatted html email from within a stored procedure that returns a dataset?
thanks!
chris
I have below code to send email in HTML table format with store procedure. from my
Database = "CreditControl"
Table = "Testing$"
and code as below
DECLARE @bodyMsg nvarchar(max)
DECLARE @subject nvarchar(max)
DECLARE @tableHTML nvarchar(max)
DECLARE @recipients nvarchar(max)
DECLARE @profile_name nvarchar(max)
[code]....
I have a report that gets a Customer_Number parameter and sends a mail with that customer's data.I want my users to be able to get this report's results by sending an email to a certain email address with a customer number in the topic.
View 1 Replies View Related