I have a address column in one of my databases that I need to split out by carriadge return but don't know what to start..This is my example query
SELECT
Address
FROM
PUB."Address"
Where "Id" = 123456
3 The StreetMayfairLondonEngland...I would like the results to show
Either
3 The Street
Mayfair
London
England
Or the same but horizontal
i have written a query I was SO proud of but THEN was told to separate the values out of one column. simple way to do this without having to rewrite the whole query? Will I need to include a Case statement?
Basically the column contains several types of vacation codes which will need to be renamed to 2. So there is leave 1, leave 2, and leave 3 and sick. I will need to rename all leave 1, 2, and 3 to just vacation and leave sick as sick.
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[APPL_STATUS_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[STATUS_START_DATE] [datetime] NULL,
[STATUS_END_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]...
I want to just retrieve the numbers left of the space in this address column what can I use? The Address column is Varchar.
Address:
6501 Red Hook Place #201
32 Orchard St
1 Hardy Rd ste 210
379 E Center St.
170 Bridge St
399 Interpace Pkwy
1800 Valley Rd
2210 Harding Hwy
41 Maple Ct
Expected Results:
Address
6501
32
1
379
170
399
1800
2210
41
I tried using this:
Left([ADDRESS], Charindex(' ',[ADDRESS] - 1)) as 'Address'
But i received an error:
Conversion failed when converting the nvarchar value '6501 Red Hook Place #201' to data type int.
could u help me out to get the month wise date on column address
this is the query
SELECT[ID],
SUM(CASE WHEN week_no = 1 THEN Qty ELSE 0 END) AS week1,
SUM(CASE WHEN week_no = 2 THEN Qty ELSE 0 END) AS week2,
SUM(CASE WHEN week_no = 3 THEN Qty ELSE 0 END) AS week3,
SUM(CASE WHEN week_no = 4 THEN Qty ELSE 0 END) AS week4,
SUM(CASE WHEN week_no = 5 THEN Qty ELSE 0 END) AS week5
FROM
(
SELECT[ID],week_no = DATEPART(week, [Date]) - DATEPART(week, DATEADD(MONTH, DATEDIFF(MONTH, 0, @input_date), 0)) + 1,Qty
FROM@sample
WHERE[Date]>= DATEADD(MONTH, DATEDIFF(MONTH, 0, @input_date), 0)
AND[Date]< DATEADD(MONTH, DATEDIFF(MONTH, 0, @input_date) + 1, 0)
) d
GROUP BY [ID]
for this query the output will be
/*
ID week1 week2 week3 week4 week5
----- ----------- ----------- ----------- ----------- -----------
st001 114 38 0 0 0
st002 110 110 0 0 0
but i need date wise split up to be displayed for particular month
ID week1 week2 week3 week4 week5
(1-7) (8-14) (15-21) (22-28) (29-31)
----- ----------- ----------- ----------- ----------- -----------
st001 114 38 0 0 0
st002 110 110 0 0 0
pls help me out.
Shiney
i have a situation where is need to get email address from a varchar column. Here is some sample data for five records; The format can be change.
dummy text;
Tel: +44 (0)1234 566788;
Email: bbc@co.uk
Admissions dummy text;
T: +44 (0)1234 4444;
E: xyz@co.uk;
dummy text;
dummy text;
Tel: +123 32323 33;
Email: test@yahoo.com;
dummy text;
t: +88 (0) 115 333 5553;
f: +99 (0) 115 222 8888
e: dummy@gmail.com;
dummy text;
t: +11 (0) 222 222 2222;
e: myemail@test.com;
w:http://www.yahoo.com/faqs;
I have a very interesting problem in T-SQL coding for which I can't figure out the solution. Actually there is a Line_1_Address column in our data warehouse address table which is being populated from various sources. Some sources have already concatenated house number + street address fields in the Line_1_Address column whereas one source has separated columns for both data fields.
Now I'm trying to extract data from this data warehouse table and I need to split the house number from street address and load it into separate columns in my destination table. In case there is no data for house number then I should load it as NULL.
The issue is that data in this Line_1_Address column is very inconsistent so I don't know which functions to use. Here is some sample data for your consideration:
Line_1_Address
101 E Commerce ST
120 E Commerce ST
2 Po Box
301 W. Bel Air Ave
West Main Street, PO Box 1388
[Code] .....
with varchars having a max of 8000 bytes and partly because of the coder before me, I'm stuck with using text. the text has a maximum of 30,000 characters, i've tried everything to try to separate the text into 4 different varchars to no avail.. none of the string functions (left, substring, right) works on a text field, and when i try to convert it to a varchar (i.e. convert(varchar(8000), @text)) it obviously only takes the first 8000 characters...
what can i do in this case? any help would be appreciated! thanks in advance!
I have data as below:
columnA
D7 330 4/13/2014 0:0:0 KUL PVG 4/13/2014 18:35:0 4/13/2014 19:15:0 4/13/2014 23:45:0 4/14/2014 0:45:0
How can I separate it to 5 additional columns?
columnB: D7 330 4/13/2014 0:0:0
columnC: KUL PVG 4/13/2014 18:35:0
columnD: 4/13/2014 19:15:0
columnE: 4/13/2014 23:45:0
columnF: 4/14/2014 0:45:0
I have column with location for all reports, dashboards, images, pages in URL format from Sharepoint audit database. Like
sites/fm/finance/PowerPivot Gallery/FinancialStatement.rdlx
sites/ea/Mn_medical/Pages/Medical_DP/3 Site Compare.aspx
There are millions of rows like the above URLs. I need to separate all the strings from that ULR separated by "/" and make column for each so that I can create a hierarchy in tabular model. How do I write a sql for that. I could get first one and last ones with these kinds of substring:
SUBSTRING( b.DocLocation , LEN(b.DocLocation) - CHARINDEX('/',REVERSE(b.DocLocation)) + 2 , LEN(b.DocLocation) )
This gives me last piece of ULR. How I do I get all the middle pieces of URL?
I know of several methods to remove duplicate records but I recently encountered a unique situation where some duplicate records were actually acceptable.
Here is my situation:
I have a table that contains records of individuals who have children so 1 person can have 3 children with different birthdates; but there is also a field that has a specified language. The challenge arises when an individual may have only 1 child but has entered a single record twice. Once with a specifed language and again without which produces a default value of UNKNOWN.
I need to be able to remove this record without affecting records that may have a record entered twice as well; having 2 children for instance but they may also have a specified language in one record but a default value of UNKNOWN for their second record.
So I can't eliminate the unwanted duplicates by filtering out records that have UNKNOWN because I would also remove individuals that I need.
EX:
firstN | lastN | address | lang | childs birthdate
John Doe 210 Somewhere Ave ENG 1993-10-09
John Doe 210 Somewhere Ave UNK 1993-10-09
Jane Doe 210 Anywhere Ave ENG 1969-12-23
Jane Doe 210 Anywhere Ave UNK 1958-04-15
How could you remove the duplicate for John in this example without affecting Janes duplicate record which is actually ok because she apparently has 2 children with different birthdates whereas John's duplicate record is obviously created because it was entered twice; once without entering
a language and the second time specifying the language?
I have tried a number of things short of creating a cursor which isn't really the best way to resolve this issue since there are millions of rows.
Anyone out there have any input that be helpful? Or has anyone ever had this similar issue? I would be interested in knowing how you addressed the problem.
Any help is appreciated. :)
Below are the same data
with Sample(Size) as (
select '16.3 Oz.' union all
'1' as union all
'2 Tablespoons' union all
'46. Oz. Each' )
Iwant to separate number and alphabets. But i wanted to keep the dot to have decimal values. Expected output
select '16.3' as val1 'Oz' as val2 union all
'1' val1 as union all
'2' as val1 'Tablespoons' as val2 union all
'46' as val1 'Oz Each' as val2
Please note that i need to remove the extra dots at the end of the the val1 and no dots in val2
I rid some of the functions like dbo.fn_StripCharacters and dbo.fn_GetAlphabetsOnly ffound in the internet. evey with my own logic. i couldn't remove the dot which appear at the end of val1
Hi folks. I am sure this is a common situation so there shouldn't be any problems ;-) I need to run a web server and a separate database server, but am having trouble working out what username I can use in my SQL database. Here is my setup:Web server: [Windows Server 2003, IIS6, ASP.NET 1.1] The anonymous web account for the website has been changed to one created by me, so I know the password - lets call it 'IUSR_ME'. Basides that it is all default. IIS_WPG has also been given access to all website files. Database Server: [Windows Server 2000, SQL Server Standard Edition] I already have a 'classic' ASP application running on this setup, and this was achieved by putting IUSR_ME as a user in the database. Does anyone know how to do it with ASP.NET? Many thanks in advance.George
View 1 Replies View RelatedI know there has to be a way to do this, but I've gone brain dead. Thescenario..a varchar field in a table contains a date range (i.e. June 1,2004 - June 15, 2004 or September 1, 2004 - September 30, 2004 or...). Theusers have decided thats a bad way to do this (!) so they want to split thatfield into two new fields. Everything before the space/dash ( -) goes intoa 'FromDate' field, everything after the dash/space goes into the 'ToDate'field. I've played around with STRING commands, but haven't stumbled on ityet. Any help at all would be appreciated! DTS?
View 1 Replies View RelatedHi Gurus,
I am new to SSIS. I am trying to install just the SSIS in one machine("SSIS Machine") and just the DB Engine ("SQL Server Machine") in another machine. What I am trying to do is, separating the SSIS service and packages from the Database Engine and trying to run in in another machine. I have few questions on this topic. I searched on this forum but I couldn't find a concrete answer to those questions. Forgive me if it already answered/asked multiple times.
1. When I install SSIS in "SSIS Machine", do I need to install client components also in the same machine?
2. I already established this setup (SSIS with client components in one machine and SQL Server in another) but when I tried to connect to the SSIS thro' Management Studio from Sql Server machine, I keep getting "Access Denied" error. Is it possible to connect to SSIS server from another machine (using Management studio)? I tried the DCOM security permission options I found in the internet(I don't have domain id so I gave "Everyone" full access) but still I get the same error. Any help would be appriciated.
3. Do I need 2 SQL Server Licenses (Enterprise) if I go with this environment?
4. Is it possible to configure SQL Job to run SSIS installed in another machine?
I would appriciate any help on this issue.
Thanks
Hi All
I want to know that if different users have access to a database with same loginName and password then how can I get the IP address of a particular user through a query.
Thanks in advance Anisha
Does anyone know how to get the machine IP address from a Transact-SQL statement ?
Eyal
Hi,
I am making a DTS package and would like to:
1) create a file then,
2) transfer this file to another location(not on the same server).
How would i do the ftp part ?
The file transfer protocol task only lets u download from another site; how would i upload a file to another site ?
thanks.
Clayton
Hello,I want to block certain mac address to access my MS-SQL server. for that what can i do. for exampleI want to block the mac address [abc]. how is it possible to block the mac address [abc]
View 2 Replies View RelatedHi all
I want to know that if different users have access to a database with same loginName and password then how can I get the IP address of a particular user through a query.
Thanks in advance
Anisha
Someone told me that some non-US address do not have State/Province, andsome might not have Postal Code. Is this true?
View 3 Replies View RelatedHi All,We have an MS SQL server that is within the company firewall. We want aparticular database to be availabe to a vendor to build a website.When we had to develop a website on another vendors machine they gaveus following details.SQL Address: testdata.data.comSQL Port: 1234SQL testUsr Password: testPassword1. How do we go about doing this?*******The SQL Server has 5 other databses. I have already created a databaseuser for just that database.2. So If the vendor registers their enterprise manager with ourinformation, can I make them see only their database? Or does all theother database also get displayed. They are not able to access anyinformation on the other databases. But they can see it.Is it possible to prevent them from seeing the other databases?Tx in advance
View 1 Replies View RelatedOk...I'm sick of this.
I'm migrating data from three (third-party, propietary) systems that my company has been using into one common system. The problem with this is that address information in these systems is about as standardized as a bag of rocks. One product simply has 6 address lines, and does not segregate the information (city, state, zip, etc...). Another one has dedicated lines, but users have taken it upon themselves to "invent" ways to enter data (international customers/vendors have data in weird fields, but no rhyme, reason, or cohesion to the madness). The third one is just as bad.
I'm looking for a script-based, SQL implemenation (stored procedures?) for standardizing the addresses into a common format. Does anyone know of anything?
Hi
I want to know that is there a system sp or table or somewhere in sql server that I can get ip address or mac address of clients that connect to sql server?
thanx
does anyone know how to drop the last part of an ip address? I've been searching various sites for string functions and havn't come up with anything that works. What I want is something that will "find the third occurance of a "." and then return everything to the left of it"
I've tried various types of InStr and even found a SUBSTRING_INDEX function, but apparently it's only for mysql.
i'm using sql server and linking tables thru access
fisk
I am fairly new to SQL and am trying to write a function to parse the ip address into 4 sections. I have been searching through the forums to see if anyone has a posted example of parsing an ip address but could not find one.
I am wondering what would be the best method of doing this, or if anyone has an example.
Thank you
Hi,
My problem is -
I have a trigger for auditing the changes(insert/update/delete) in the database table.That is done and is working fine. But I need to have the client's IP address from where the changes are done. That I need in T-SQL, that means, not in any web form but in the SQL/T-SQL.
As I have checked many forums, I got that there is extended stored procedure in master database named xp_cmdshell which has xplog70.dll and when we execute this stored procedure with 'ipconfig' we can get the IP Address. But I do not need that in master database. I need that in my database say myDB.
So how to proceed further. I don't know whether to create extended SP which contains DLL or is there any other option.
Pls help
Thanks in advance
Parsing Address
This is not really a reply, but I saw the problem and the replies look very promissing.
I'm using ss2k, I have a table with an address column.
here is some example of the records under ADDRESS :
WILLOW CREEK PL
RED BARN DR
RED BARN DR
CARRINGTON DR
RENNER RD
EDMONTON CT
SPRINGBRANCH DR
HILLROSE DR
CEDAR RIDGE DR
LARTAN TRL
PRESIDENT GEORGE BUSH HWY
What I want to do is to write script that runs daily and parse the street names (RED BARN) and street types (Dr, PL , etc.. ) to 2 colums. As u can see there is no fixed length or fixed number of words ...etc ...
Any help would be really appreciated.
thnks
I need some help devising my tables.
I have a company table and a address table. I have created a linked table with two foreign keys from the company table and the address table respectively.
This set up allows me to apply more than one address per company which is fine. My problem is that I need a way to prevent a company from entering exactly the same address twice.
In the address table i have the following fields:
AddressKey - PK
CompanyKey - FK
Address 1 - 3
Town
County
Country
PostCode
In the company table I have the following fields.
CompanyKey - PK
FirstName
Secondname
And finally in the link table I have the following:
CompanyKey - FK
AddressKey - FK.
Now, if i entered the following into the address table Assuming that company id of 1 was already entered into the company table.
AddressKey - 1, CompanyKey = 1, Address1 = 11 Address2= Taylor
I need a way of preventing this from happening.
AddressKey - 2, CompanyKey = 1, Address1 = 11 Address2= Taylor
As can be seen the PK - FK values are unique and are correct for referential integrity, but the actual address is the same.
Any help we be mostly appreciated.
Cheers
Wayne
1A apple street
11 apple street
1B apple street
i want to select only the first address. how do i do it?
Hi:I need to store MAC Addresses. What is the standard way of storing thistype of attribute? Datatype? I can't find any discussions about thisanywhere.Thx for any pointers.
View 1 Replies View RelatedHi
I've got an openrowset query that works perfectly if I enter the computer name, but it fails when I enter the IP address.
Is there a setting somewhere that I need to enable to make this happen?
Thanks in advance
I have an excel file on a web server on a different location to the sql server. I want to use OPENROWSET to query the excel file, but it doesn't seem to like using a URL.
Is this the case, or am I doing it wrong? Works fine when I use a local address (eg c:excelfile.xls) when testing locally, but I need to use a URL in production.
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=http://mydot.com/excelfile.xls','SELECT * FROM [page1$]')