Seperation Of Log File And Database File
May 7, 2007
Hi,
I have the database file and log file for all the databases in SQL server in the same drive. I want to seperate both the log and data file into different drives. What is the best way to do it? Is there any script that could be run.
Please help.
Thanks !
View 2 Replies
ADVERTISEMENT
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Oct 9, 2007
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies
View Related
Mar 24, 2006
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
View 1 Replies
View Related
May 29, 2007
Hi all,
I have a database name MyDatabase (SQL Server Express Dabase File). Is there anyway that I could convert it to SQL Server Compact Edition File?
By the way does anyone here got any problem with programming in SQL Server Compact Edition? It troubles me.
Thanks,
bombie
View 6 Replies
View Related
Jul 20, 2007
I am developing a C# mobile 5.0SDK app that utilizes SQL2005 Compact Edition device files on Vista using as far as I know the latest SPs and versions.
Last night, I could open tables from the Server Explorer .sdf file, see the contents, edit the schema, etc. Now today, I assume all of a sudden,I am able to open schema but cannot open the table to see the contents. I get:
Microsoft SQL Server 2005 Compact Edition captioned error dialog box that says "Access to the database file is not allowed. [ File name = ],[,,]
Using Sql Server 2005 Management Studio Express, I can open the table, do queries etc. I have tried rebooting, deleting, opening old projects, deleting dataset, disconnecting mobile device, but I still get the same error. I have tried stopping the SQL Server(SQLEXPRESS) service on the server but get:
Cannot open MSSLQ$SQLEXPRESS service on computer 'p5w64'. Access is denied.
I have no idea what to do next to start moving forward again, other than try the XP environment which I will do next.
Has anyone experienced this problem?
Thank you.
View 9 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 6 Replies
View Related
Sep 22, 2015
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy
ON
PRIMARY
( NAME = Dummy_data,
FILENAME = 'D:....DATADummy.mdf',
SIZE = 250MB,
FILEGROWTH = 25MB )
LOG ON
( NAME = Dummy_log,
FILENAME = 'D:....DATADummy_log.ldf',
SIZE = 50MB,
FILEGROWTH = 5MB ) ;
GO
View 3 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 3 Replies
View Related
May 15, 2006
good morning,
I want to load data that i receive everydays from my customers in .xls file format (excel) or cvs file format, to the database that i have created on this purpose. but when trying to do that whith SSIS; i got an error message .... that i can't import redudant data in my database column.
Best regards.
View 1 Replies
View Related
Apr 18, 2004
Hi there :)
I'm in the final stage of my asp.net project and one of the last things I need to do is add the following file information to my SQL server 2000 database when a file is uploaded:
First of all I have a resource table to which I need to add:
- filename
- file_path
- file_size
(the resource_id has a auto increment value)
so that should hopefully be straight forward when the file is uploaded. The next step is to reference the new resource_id in my module_resource table. My module resource table consists of:
- resource_id (foreign key)
- module_id (foreign key)
So, adding the module_id is easy enough as I can just get the value using Request.QueryString["module_id"]. The bit that I am unsure about is how to insert the new resource_id from the resource table into the module_resource table on file upload. How is this done? Using one table would solve the issue but I want one resource to be available to all modules - many to many relationship.
Any ideas?
Many thanks :)
View 1 Replies
View Related
Jun 8, 2006
I used SQl Server replication to create a new database (as I did using Visual Studio 2003) but when I go the Pocket PC and click on the file I get a native error 25011 with a description
The file is not a valid database file
An Internal error has occurred[,,,Databasename,,]
Interface defining error: IID_IDBInitialize
When I check on my Pocket PC what programs are available I've got Query Analyser 3.0 and SQLCE Query. It appears that the .sdf file is associated with SQLCE Query because when I use that to try and connect to the same database I get the same error.
If I use Query Analyser 3.0 (after having copied the .sdf file) to the temp directory I'm able to open the database.
There is a similar post to this one but it doesn't help me.
Is it that SQLCE Query is wrongly associated with the .sdf file?
If so how do I change that?
Or is there some other problem preventing me clicking on the .sdf db to open it?
I have recreated my project in Visual Studio 2005 and rebuilt all my components in 2005. There are some external ones that I use that I can't do this for.
The following is the build output that I get when I deploy to a clean PDA with a hard reset performed
------ Build started: Project: Printing, Configuration: Release Any CPU ------
No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral,
PublicKeyToken=969db8053d3322ac, Retargetable=Yes". Choosing "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily.
Printing -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll
------ Build started: Project: MobileSeller, Configuration: Release Any CPU ------
Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes"
from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Data.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac,
Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Windows.Forms.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from
Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.dll] to solve conflict and get rid of warning.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Microsoft.Common.targets : warning MSB3247: Found conflicts between different
versions of the same dependent assembly.
MobileSeller -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(546,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(634,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(706,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(846,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
Done building project "MobileSeller.vbproj".
------ Skipped Deploy: Project: BO, Configuration: Release Any CPU ------
Project not selected to build for this solution configuration
------ Skipped Deploy: Project: Printing, Configuration: Release Any CPU ------
Project not selected to build for this solution configuration
------ Deploy started: Project: MobileSeller, Configuration: Release Any CPU ------
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Data.Adoce.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Interop.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePocketHTMLprint_NetCF.dll'
Deploying 'C:DevMILLAR CODE CABINETVS2003CFReferencesUSICF.dll'
Deploying 'C:DevVS2005CFReferences
eleaseSignature.dll'
Deploying 'C:DevVS2005CFReferences
eleaseRealUpDown.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll'
Deploying 'C:DevVS2005CFReferences
eleasePhoneAPI.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMVnetApplication.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMobileHList.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMobileGrid.dll'
Deploying 'C:DevVS2005CFReferences
eleaseImageButtons.dll'
Deploying 'C:DevVS2005CFReferences
eleaseCreditCardValidator.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseBO.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe'
========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
View 5 Replies
View Related
May 14, 2008
hello,
I'm not really sure my question belongs to here...
I have a database in Access (from microsoft office, of course), and I want to transfer convert it to SQL Server.
Does anyone know how I can do it? It must be very simple, but I haven't found it yet....
Thanks a lot!
- Miri
View 7 Replies
View Related
Sep 23, 2007
Hi
I am in a trouble without doing any mistake. I restarted while in parallely my sql server was restarting i.e I opened a management studio.
When it booted up next time. I see that my database is gone. Though it is showed up in the server but has no node below it.
I then checked the mdf files and ldf files and found mdf file to be of 0 KB and ldf file is of 1.73 GB. My database was in full recovery mode but i did not take any database backup.
Here ais the entry from my SQL server log:
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0000000000000000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAHello.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I wonder if now there is a case to recover my database..Can I restore/recover the database from .ldf file as it was in full recovery model?Any help i shighly appreciated.
View 5 Replies
View Related
Sep 16, 2007
RESOLVED RESOLVED RESOLVED
DOH! When I rebuilt the OS, I changed the data partition ID's, and didn't remember to change them in the connetion strings
Not great, but better than continuing to bang head against wall.
Would like to say to MS appreciators that the VS2005 reinstall actually went quite well, considering.
===========================================================================
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
The Connection strings are all of the form
connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=(specific file string).MDF;Integrated Security=True;User Instance=True"
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
View 1 Replies
View Related
Feb 20, 2007
Hi,
I want to retrive the values from the database 'northwind' and then i want to store the backup files in "D:/Sample/north_database.bak" format(local machine).
I retrive the database values in .txt,XML format. Now i want to take in .bak format.
give the Suitable solution for this.
Subashini.G
View 4 Replies
View Related
Aug 31, 2007
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
Sep 2, 2015
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
View 2 Replies
View Related
Jul 28, 2006
Hi,
how can I efficiently find out the shortest connection in the following scenario:
there's a table which has two colums, both of the same type.
two items in the same row means that they are connected. (there is no direction of the connection so that a connection shows up in both ways in a table for query performance issues)
ie. item1 is connected with item2 and item2 is connected with item3, then the table looks like:
row1: item1 , item2
row2: item2 , item1
row3: item2 , item3
row4: item3 , item2
so the connection item1 to item3 would be item1 - item2 - item3.
degree of seperation is 2 in this case. how can I implement this in general with sql?
making an exhaustive search would cost too much time. thanks for any hints!
View 1 Replies
View Related
May 10, 2007
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
mdf file size 5,738,944 KB
ldf file size 10,176 KB
View 4 Replies
View Related
Jul 23, 2005
The data file is a simple Unicode file with lines of text. BCPapparently doesn't guarantee this ordering, and neither does theimport tool. I want to be able to load the data either sequentially oradd line numbering to large Unicode file (1 million lines). I don'twant to deal with another programming language if possible and Iwonder if there's a trick in SQL Server to get this accomplished.Thanks for any help.Mark Leary----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups---= East/West-Coast Server Farms - Total Privacy via Encryption =---
View 15 Replies
View Related
Nov 19, 2007
Hi,
The standby file (.tuf file) got deleted accidentally on the secondary. How can I recover the database without the standby file?
View 3 Replies
View Related
Mar 19, 2008
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. § Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies
View Related
Mar 1, 2006
how can i attach the mdf file with a corrupted/deleted Log file
my log file is deleted how can i attach the mdf file
View 1 Replies
View Related
Jun 18, 2015
I am testing some maintenance tasks sql commands such as index rebuild, index reorg, update statistics and db integrity check on a SQL Server 2014 Database. This is a new non-production vendor database (DB Size 500 GBs, Log Size 25 GBs) which eventually will be created in production. Currently, it is in full recovery model and without log backups. The database has a whole lot of indexes. I am just trying to rebuild and reorganize all the indexes (that need it), in addition to trying to get an idea of how long these maintenance task will take and the space needed in the log file to complete these tasks/commands. I would like to execute these tasks manually (the first time) to gather the duration and space required information. Eventually, I would probably schedule a weekly job to perform this maintenance.
I ran the index rebuild task on the database and noticed that the log file grew by over 50 GBs. I killed the process and truncated and shrunk the log file back down.
1. Does the index rebuild, index reorg, update statistics and db integrity check commands all use the log file?
2. Does Indexs Reorg have less impact on log file then Index Rebuild?
3. Should a truncate log and shrink log file be performed after these maintenance commands?
4. Should a full database backup be performed after these maintenance commands? Or before the maintenance commands?
I have read and understand that shrinking is not good for the database (could lead to more fragmentation and more data file growth when data is added) and I know about rebuilding indexes when fragmentation is GT 30% and reorganizing indexes when fragmentation is GT 5% and LE 30%.
Since this is a non-production database maybe I should set the recovery model to simple, run the maintenance commands and leave the database in simple recovery model unless the vendor needs it in full recovery model for some unknown reason.
5. With the simple recovery model the log file should be reused in a circular manner and not grow during these maintenance tasks. Is this correct?
View 3 Replies
View Related
Mar 10, 2008
Hello World,
I'm new to SSIS and would like a little assistance getting started, if possible...
Here is what I want to do:
Check if file exist (C:DTS UpgradeFilexxx.txt) --->
Archive file (C:DTS UpgradeArchive) --->
Check if file has data (true or false)
AND/OR
If there are any good website that have good direction, let me know
Thanks in advance for your help!!!
View 5 Replies
View Related
Jul 31, 2014
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
View 1 Replies
View Related
Jul 6, 2015
For a database, we have 4 data files in a particular file group and the file sizes are almost 70 GB each.
Do I come across any performance issues if I create/pre-allocate an additional data file in the same file group so that the existing files don't grow too much?
View 5 Replies
View Related
Jun 23, 2015
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies
View Related
May 14, 2015
I'm copying files to a folder with the naming convention as follows in the source folder:
CM_ABC_MY_TEST.txt
In the destination folder, this filename needs to appear as:
CM_XYZ_MY_TEST.txt
In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.
View 10 Replies
View Related
Jul 24, 2015
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
View 2 Replies
View Related
Apr 24, 2007
Hi,
I am looking for tutorials about how to create dts et dtsx files.
Thanks for your help.
Arioule.
View 1 Replies
View Related
May 9, 2008
In my script task I have the following code. The task I'm trying to accomplish is:
If the filename on FTP can be found in the local archive folder of e: drive then show message "FileAlreadyThere" (I will ultimatley change it to do nothing); if the filename on FTP cannot be found in the local archive folder of e: drive then transfer the file to the local package folder on d: drive.
While the script task is executing I was watching it closely, but the problem i saw is that:
If some files on FTP are already in local archive folder and some are not, then it the files which are already in the archive folder are dumped to the package folder; then after that the files which are not in the archive folder are then dumped to the package folder. But I only want the new files on FTP to be transferred to the package folder for further processing.
Then after this is finished, I saw all the files in the package folder are refreshed one after another, after the first round of refresh the second round starts, after the second round finishes it then stopped. I saw it refreshes itself because the 'Date Modified' of the file changes. And I saw the script task turned green.
I don't see how the code below produced this result. Something is wrong in the logic of the loop? Anyone has any idea why it's behaving the way it is now? And how to change the code to accomplish what I want? Thanks a lot!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Imports System
Imports System.IO
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
cm.Properties("ServerName").SetValue(cm, "ftp2.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0")
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
ftp.Connect()
ftp.SetWorkingDirectory("/directory")
Dim fileNames() As String
Dim folderNames() As String
ftp.GetListing(folderNames, fileNames)
If fileNames Is Nothing Then
MsgBox("NoFileOnFTP")
Else
Dim fileName As String
For Each fileName In fileNames
If File.Exists("c: emp" + fileName) Then
MsgBox("FileAlreadyThere")
Else
ftp.ReceiveFiles(fileNames, "c: emp", True, True)
End If
Next
End If
ftp.Close()
End Sub
End Class
View 3 Replies
View Related