This error showed up last night.
I looked up RECONFIGURE, but I'm not sure what I need to do.
Can this be ran during the day? Or should it be done when all users are off? What options should I use?
I'm not sure as to why this error is showing up.
How do I prevent it from showing in the future?
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install..
In SQL 2000, the following message is logged to the NT event log every time the sp_configure 'show advanced options' command is executed. This did NOT occurr in SQL 7.
"Error: 15457, Severity: 0, State: 1
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install."
Does anyone know if I can turn OFF the event logging of this message. It is confusing to the end users of our product that uses SQL 2000 as a back-end. Some of our product's code issues the sp_configure command that causes this message. It shows up as an informational message, but then the first word in the text is "Error:". I think I'll be getting a lot of support calls about this if I can't figure out a way to make it stop writting this to the event log :(
Any insight or suggestions would be most appreciated.
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
Please help.
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
Hi Friends,
Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server, When i run the application im getting the following error.
Im trying to connect to the database from local machine application to server machine database
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My WebConfig File is<connectionStrings>
<add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
<appSettings>
<add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/>
</appSettings>
Please Help me to sortout this ISSUe, Its very urgent please
I got Form Authentication to work, but I am getting this error sometimes. To reproduce this error consistantly is to run iisreset.exe to have a fresh start. Go to my report server login and open any report.
The page will display: The remote server returned an error: (500) Internal Server Error.
If i click "F5" to refresh the page the report will show up or if you go to another report it will work also. It is just the first time after iisreset.exe. It is very strange.
Here is my log file:
aspnet_wp!library!6!03/11/2008-15:20:36:: i INFO: Exception dumped to: c:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
aspnet_wp!library!6!03/11/2008-15:20:47:: Call to GetPermissionsAction(/).
aspnet_wp!library!1!03/11/2008-15:20:47:: Call to GetPropertiesAction(/, PathBased).
aspnet_wp!library!6!03/11/2008-15:20:48:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:48:: Call to ListChildrenAction(/, False).
aspnet_wp!library!6!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:20:53:: Call to GetPermissionsAction(/Sentrack).
aspnet_wp!library!1!03/11/2008-15:20:53:: Call to GetPropertiesAction(/Sentrack, PathBased).
aspnet_wp!library!a!03/11/2008-15:20:54:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:54:: Call to ListChildrenAction(/Sentrack, False).
aspnet_wp!library!a!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction().
aspnet_wp!library!6!03/11/2008-15:20:58:: Call to GetPermissionsAction(/Sentrack/Shared Reports).
aspnet_wp!library!1!03/11/2008-15:20:59:: Call to GetPropertiesAction(/Sentrack/Shared Reports, PathBased).
aspnet_wp!library!6!03/11/2008-15:20:59:: Call to GetSystemPermissionsAction().
aspnet_wp!library!1!03/11/2008-15:20:59:: Call to ListChildrenAction(/Sentrack/Shared Reports, False).
aspnet_wp!library!6!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction().
aspnet_wp!library!1!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:21:04:: Call to GetPermissionsAction(/Sentrack/Shared Reports/Report).
aspnet_wp!library!1!03/11/2008-15:21:04:: Call to GetSystemPropertiesAction().
aspnet_wp!library!a!03/11/2008-15:21:05:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased).
aspnet_wp!library!1!03/11/2008-15:21:05:: Call to GetSystemPermissionsAction().
aspnet_wp!library!a!03/11/2008-15:21:06:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased).
aspnet_wp!library!1!03/11/2008-15:21:06:: Call to ListEventsAction().
aspnet_wp!library!1!03/11/2008-15:21:07:: Unhandled exception was caught: System.Web.HttpException: File does not exist.
at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
aspnet_wp!library!1!03/11/2008-15:21:07:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Web.HttpException: File does not exist.
at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
--- End of inner exception stack trace ---
Any ideas?
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
View 1 Replies View RelatedHi All...
I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be
the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall
connectivity problems. Please help!!!
===================================================================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Now you all must admit that, if your somewhat new to this databasing, It's a ***.
The source for my application is Visual Web Designer 2005 Express
It is an ASP.Net driven site with membership roles and all the good stuff.
the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider
to something else. Most of my complications and frustrations come from GoDaddy and no access to the
shared server (understandibly).
I hope I gave enough info for help and not too much..
Dave
I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
Thanks, Jennifer
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity
The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.
When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:
SQL Server Internal Error. Text manager cannot continue with current statement.
The server is running SQL Server 2000 with SP4.
I am really concerned because this is a production sever and there are over 300 users access concurrently.
Please help me to find a solution.
Thanks,
Roshan.
I have 2003 server installed on my machine along with MS SQL Server Management Studio and I am able to connect fine to SQL 2000 Instances. On my laptop running Vista Enterprise, I can not connect to these exact same instances via MS SQL Server Management Studio as I am getting the above error. Does anyone else have this problem? I have no idea what to check for anymore. Thanks in advance.
View 2 Replies View RelatedI recently installed SQL Server 2005 Enterprise on a machine running Server 2003. I have successfully configured Reporting Services (see below for summary of settings)
- Used the defaults for the Repor tServer and Report Manager Virtual Directories
- Windows Service Identity set to domain user. The domain user is part of the administrator group on the machine and has sysadmin rights to the database
- Web Service Identity set to NT AuthorityNetworkService
When I open http://localhost/reports/, I get the following error:
I have check a bunch of forums, but have no success. Any advise would be greatly appreciated!!
Server Error in '/Reports' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Source Error:
[No relevant source lines]
Source File: Line: 0
Show Detailed Compiler Output:
c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3a890e9c0 068591f_f54cc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl34a099978 068591f_f54cc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3de5a2332 0958a20_f54cc701ReportingServicesWebUserInterface.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3498aee86 042473c_93d0c501ReportingServicesCDOInterop.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3cd47089b 0f2a80e_f54cc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3f180608d 0083daf_b16dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl323449648 068591f_f54cc701ReportingServicesNativeClient.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699;1701 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1433
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>
ASP v2.0I am getting this error when attempting to sign in to my site once uploaded to the server. Can anyone help me to resolve this error?
Server Error in '/' Application.
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42
First-time poster (and very new to ASP.NET, so please be patient) - I am using VS 2005. I have an ASP.Net 2.0 app that is using Forms Authentication and a Login server control with AspNetSqlMembershipProvider. I have an instance of ASPNETDB.MDF in the App_Data directory on my local machine and all works well (or at least as expected). I used the Copy Web Site function to port the app (including the ASPNETDB.MDF files) to my production platform, where I encounter the error mentioned in the subject line. I have found posts (both here and other forums) that mention enabling TCP/IP using Surface Area Configuartion Utility, SQL Server Browser are exempt from firewall, and a few other things. My production machine does not have SQL SVR 2005 installed nor SQL SVR Express. Do I have to install SQL Server Express onto my production platform in order to resolve this, or is there another means (something in SQL Server 2005 Management Studio on my local machine) that will enable me to do this on the production machine?Also, I have been told that it is possible to use a database on another machine as the data store for authentication. Does anyone know how to do that? This would make the first question moot.Thanks in advance!
View 2 Replies View RelatedI have tried to find the solution for the subjectline(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) and i got the solution from the below link but when I set my web.config file according to the posted help i couldn't resolve it kindly help me for thatmany thanks,http://www.aquesthosting.com/HowTo/Sql2005/SQLError26.aspx
View 4 Replies View RelatedAll aspects of my website work as expected when previewed in the browser locally. It appears that I successfully published the website to my hosting company server.After successfully accessing the login page from a hyperlink on the homepage, I attempt to login and receive the following error: Please advise.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +421
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Ok can somebody please explain to me why only 1/2 my project is getting this error. I am working with SQLExpress on a remote windows 2003 box. The sql server has its service running and the browser is also running. The server has been set to allow remote connections and to accept TCP/IP and Named Pipes. Now, the website uses asp.net membership and roles to allow the users to login, which actually works. So I know that there are no errors in that connection string. However, all the data acess code is compliled as a sepeate class library thats referenced in the bin directory. When calling those methods to beind to a control in code, is where i run into this error. The class library connection string in the app.config file is exactly the same as the connection string in the web.config...i have checked permissions as well, im at a loss to the reason why this is not working....its probably something simple, but im not finding it.
On a seperate note - How do i get the remote database to show up in the server explorer on vs2008, i have tried putting in the ip addressinstance name, and a combo of there items, it will not connect. I have a feeling the two issues are connected. Also fyi, on the remote box, I am able to login with the sql studio express, so im not really sure exactly wuts gong on. Both items are really important and i need to be able to use both of them.
Thanks,
Jeremy
Hello, I have deployed myWebApp on the IIS. All went well now, but the site does not have any connection with the database. I've already done a search on the error 26, which gave me alot of hints about solving the problem.Still I'm gettting this error. I already enabled the remote connections through the sql surface area configuration.Could it have something to do with the fact that I use LINQ? I can't find any connectionstring to modify anywhere ... Help would be appreciated.
View 6 Replies View RelatedHi,I am working with Webparts in ASP.NET and getting following error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Can anybody knows how to fix this issue. I have SQL Server 2005 Developer edition.RegardsAhmad
I made a simple ASP.NET 2.0 Website that uses memberships, roles, and access to MS SQL Server 2005 database. Everything works fine on my development computer (WinXP Pro). When I deployed this Website on another computer (WinXP Pro) and tried to access the main page from the same computer, I get the error below.
I disabled the Windows Firewall (the only one I use), I ensured that SQL Server Browser is Active and Running, and I changed Remote Connections in SQL Server 2005 Surface Area Configuration to use Local and Remote connections for all the components.
In my Web.Config I used:
<connectionStrings><add name="sqlConnString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|DBdemo.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/></connectionStrings>
Any idea why am I getting the following error?
Server Error in '/WebDV' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 2027: sqlConnection = New SqlConnection(sqlString)
Line 2028:
Line 2029: If sqlConnection.State = Data.ConnectionState.Closed Then sqlConnection.Open()
Line 2030: If Not Page.IsPostBack ThenSource File: C:InetpubwwwrootWebDVDefault.aspx.vb Line: 2029 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734787
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
Default1.Page_Load(Object sender, EventArgs e) in C:InetpubwwwrootWebDVDefault.aspx.vb:2029
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I have a SProc that runs across many clients without any problems. Every now and then, though, I get the following error:
Internal Query Processor Error: The query processor encountered an unexpected error during execution. [SQLSTATE 42000] (Error 8630).
All I am doing is populating Temp tables with some data and then joining them together to create a Global Temp table that is being BCP'd to a network share.
Has anyone come across this error in SQL Server 2005? I cannot find anything on Google or Microcsoft.
Thanks,
Robert
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
View 1 Replies View RelatedHi All:
I'm having problem connecting remotely to my sql 2005 server. I do get this error msg
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I'm using a named Instance and conncting like 192.168.2.1DB120
I have configured to server to accept remote connection.
I can connect locally bout not remotelly
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
Hi,
I have been stuck up with this error.
I am using SQL Srver express edition with asp.net 2.0 on windows XP SP2.
When I open the SQL Management studio and execute queries it works fine.
When I exute query in command prompt using SQLCMD -E -S ServernameInstance
It conect with database and I can freely execute queries in command prompt.
I have also tried to connect with Classical ASP 3.0 It also works fine. No error
I have made all changes that u specified in ur article.
But When I try to connect with asp.net. It gives me error.
"provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
Same files are workign fine in my office with SQL Server 2005 enterprise edition and ASp.net 2.0. on Windows server 2003. I do not get this error. But at home I am facing this problem again and again.