Server Error : Launching SSIS Using A Webservice And Asp.net
Jan 16, 2007
Hey guys,
I have a webservice set up on the same box where my SSIS packages sit at. I have an ASP.net app which calls the webservice. The webservice in turn invokes the ssis package and , I run it on file system.
i keep getting this error
System.Web.Services.Protocols.SoapException was unhandled by user code
Message="Server was unable to process request. ---> That assembly does not allow partially trusted callers."
Source="System.Web.Services"
Actor=""
Lang=""
Node=""
Role=""
StackTrace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at CallDummyWebServ.com.bls.cmndev2.LaunchSSISPackageServiceCS.LaunchPackage(String sourceType, String sourceLocation, String packageName) in D:ProjectsCallDummyWebServCallDummyWebServWeb Referencescom.bls.cmndev2Reference.cs:line 78
at CallDummyWebServ._Default.btnSayHello_Click(Object sender, EventArgs e) in D:ProjectsCallDummyWebServCallDummyWebServDefault.aspx.cs:line 26
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I tried to set up the impersonation on both the asp.net 2.0 config and web.config .. but the problem is stil haunting me .. any help or suggestions would be greatly appreciated.
View 5 Replies
ADVERTISEMENT
Dec 5, 2007
SQL Server 2005 (9.00.3042.00)
The servers are actually a cluster in an active / passive configuration. There are 2 servers with internal IP addresses and then a virtual server. We'll call them 192.1, 192.2 and VirtualBox. If I remote desktop into VirtualBox and run the config manager, nothing will happen for about 45 seconds and then I get a dialog with this message "Connection to target machine could not be made in a timely fasion.". Other than 'fashion' is misspelled :), I'm unable to determine what could cause this. Are there issues running this on a clustered environment? Or are there some things I can look at to diagnose this issue?
View 5 Replies
View Related
Oct 3, 2007
I have just installed SQL Standard. I beleive I have installed all of the components. But I can't find SSIS. I open teh Business Intel. Studio, select File, New, Project. But no where in the tree do I see SSIS. Did I miss something in the install?
I need to import a tab delimited file and export to tab delimited. I think SSIS is the thing to use.
Thanks for the help.
View 5 Replies
View Related
May 5, 2006
Has anybody developed a ASP.Net app that interfaces to SSIS? If so, what was your experience? Any pitfalls, tips, etc? We have a requirement to launch and monitor SSIS packages via a web interface.
View 1 Replies
View Related
Jul 24, 2007
We need to launch SSIS packages from within an application. As a DBA I am trying to come up with a solution that is easy to implement and will fit security best practices. Here are the possibilities that I see:
Launch dtexec via xp_cmdshell. This is the one all developers come up with first. It is not possiblebecause use of xp_cmdshell is restricted to DBAs only.
create a table into which application can insert the dtexec command. Create a job to check the table every minute and run the command via xp_cmdshell. Developers don't like this one because it is not instant.
Same as above but launch the job with sp_start_job. Not allowed because sp_start_job requires sysadmin rights.
Create a table as above but launch the packages via a service that runs on an application server. The service
checks the table and launches the packages. Fairly complex to put together and requires dtexec on the application server.
Install dtexec together with the front end and launch the packages from the client. Too expensive because dtexec requires a SQL Server license.
Create a CLR procedure that launches the package (don't know how difficult this would be and what the pros/cons are)
Does anyone have any other suggestions or comments on my assumptions?
View 8 Replies
View Related
Jan 5, 2004
Hi all. I have just migrated our DWH environment from one server to another, from a named instance to another one. When I run the DTS it works fine, but when I launch it by using a job (running dtsrun) it fails with the following error:
DTSRun: Loading... Error: -2147467259 (80004005); Provider Error: 17 (11) Error string: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
What can be the cause of this? thanks a lot.
View 11 Replies
View Related
Mar 10, 1999
I recently changed the security properties on my sql server from mixed to standard and then back to mix. Now I get an 4002 login failed when attempting to open the security manager. I am able to successfully connect to the server using the same password in the enterprise manager. Any ideas?
Thanks
View 1 Replies
View Related
Apr 30, 2008
Hi
I need to populate a table B by selecting a from table A but for every single record selected from Table A for some of the feilds i need to pass it to a WCF webservice and do some tasks.
Can somebody show me an example of this i am completely clueless on how to invoke a WCF webservice for every single row fetched from a database.
A step by step example would be of great help.
regards
Hrishy
View 6 Replies
View Related
Feb 15, 2006
Dear,
Can SSIS package be run from WebService?
P.S. SSIS package and Webservice are located in the same computer.
Thanks much!
View 9 Replies
View Related
Oct 24, 2006
We have a package that runs a webservice. The webservice connects to exchange for multiple mail accounts so it sometimes takes awhile to run.
If run from SQL Server Management Studio, it usually completes, but may occassionally time out.
If run from a job (i.e. we want this scheduled) then it NEVER completes successfully - althought there is very little information about what the error was. It seems to fail too quickly to be a time out error...
Any idea why this is happening? Or how to prevent it from timing out? Is there a way to initiate the webservice asynchronously from SSIS?
View 4 Replies
View Related
May 31, 2007
Hi Guys,
Anyone can tell me, How to invoke ssis package as webservice ?
Is it possible ? If yes How ?
Yogesh V. Desai. | SQLDBA|
View 2 Replies
View Related
Jul 14, 2007
Hello,
I am trying to use the data returned by a webservice that our application team has built.
What method should they use to return the data to the caller ?
If they try to retun a data set the SSIS is saying that it is not a well formated XML.
The webservice is using an API call to HIS, can I make this call using C# or some other mechanisam directly from SSIS?
View 3 Replies
View Related
Oct 25, 2010
I have a table is SQL server database A that is my source. I have another database B which is accessed via webservice call.(its a CRM server basically). My intention is to transfer data from A to B while B is accessible only via web service. I need to update existing one and create the missing one.
Currently I am using script component, and on every insertion of a row, i call the webservice to check if the record exist or not. If it exist I update it else create it using webservice call itself.
All this happen in Input0_ProcessInputRow(Input0Buffer Row) function.
Now this method is making 2n webserive call which is making the performance very slow.
Â
I want to optimize the approach. Is there a way where I can retrieve whole set of rows in source table in preexecute(), filter it and store it in a List. This way, i just need to check the list a perform update ro create accordingly preventing my webservice call.
How to optimize this or even some better approach?
Its actually a CRM server and I am trying to update and create contacts in CRM sync with a database.
View 3 Replies
View Related
Apr 25, 2007
Iam running sql sever 2005 express with advanced services but when i try to launch sql sever management studio express, i get the following message message and i have no idea why.
unhandled exception has occurred in a component in your application. If you click continue the application will ignore the this error and attempt to continue .
Can not create a stable key under a volatile parent key.
View 7 Replies
View Related
Jun 29, 2015
I am searching for a solution for Calling or consume a web service in SSIS through Script task. I have gone through so many links but i am able to find the exact solution. I am getting so many references, though i am unable to crack it.
My requirement is i need to call a web service URL through script task which is having a client certificate. When we are trying to connect to the URL it will ask for the certificate authentication. After calling this URL we will get a WSDL file from the web service, We need to consume that WSDL file and we need to identify the methods inside this WSDL and need to write the data available in this WSDL to the data base tables.
How can we call that web service URL( With certificate) through script task and how can we read the WSDL file and How we can load the data into DB table.
View 8 Replies
View Related
Aug 5, 2006
I installed Microsoft SQL Server 2005 Express. However, all that shows up in my "Start" menu is "Configuration tools." How do I open the application where I can start coding?
View 10 Replies
View Related
Aug 25, 2006
Okay forgive my ignorance. I just installed the SQL Server Management Studio Express, now how the heck do I launch it? :)
View 3 Replies
View Related
Sep 26, 2006
Running a SQL 2005 Database under a Default instance. i.e. (SERVERNAME) and not (SERVERNAME/SQL2005)
View 3 Replies
View Related
Jun 18, 2007
Hi!
I am developing an integration solution for MS CRM.
The basic idea is to have a CLR stored procedure that draws data from a SQL database, transforms the data, and then adds it to MS CRM via the webservice.
When executing the stored proc, it randomly fails (although at approximately the same time, everytime).
This is the error message:
Msg 6522, Level 16, State 1, Procedure add_CCU_information, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'add_CCU_information':
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
System.Net.Sockets.SocketException:
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
System.Net.WebException:
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at CRM_Integration.CRM_Service.CrmService.Execute(Request Request)
at StoredProcedures.add_CCU_information()
If someone could please give some advice, I would really appreciate it.
Regards,
Du Toit
View 2 Replies
View Related
Apr 24, 2008
I just try to implement the 3 tire architacture. So, I developed the one web project for web ui and one web service and one dall project in one solution.
On dll project put the bll, connect to sql server and return the result set to web service.
Form web service, get the result from dll and transfer to web ui.
When I call class from dll, i just overrid the connection string.
Actually it's wrok properly in my development pc and in my local webserver.
As our usual, when i publish to real web server i got the following error.
Server was unable to process request. ---> An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Anybody plz help and direct how should i fixed this problem.
Thanks.
Soe Thiha
View 5 Replies
View Related
Jan 21, 2004
My webservice is suppoed to insert a row into my SQL server database. Al columns are varchar(String). When we insert with digits everything is ok, but when we try letters as parameters i get this error message:
"An unhandled exception of type 'System.Web.Services.Protocols.SoapException' occurred in system.web.services.dll
Additional information: Server was unable to process request. --> The name 'Bob' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted."
Any idea?
View 3 Replies
View Related
May 5, 2008
I am extracting RS reports through a WebService:
report = execService.Render("EXCEL", null, out extension, out mimeType, out encoding, out warnings, out streamIds);
Some works fine but some are generating the following SoapException:
Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter.
I set required parameters to their default values. In this specific report I have two required parameters:
1: ReportParameterTime, String
2: ReportParameter1, String
I set them to their default values (ReportParameterTime to "[Czas].[Kalendarzowy].[Rok].&[2007]" - means
Time Calendar Year 2007) but I am getting the exception above. I set parameters using this code:
execService.SetExecutionParameters(parameterValues.ToArray(), CultureInfo.CurrentCulture.Name);
Where parameterValues is a List<ReportExecution2005.ParameterValue>.
When I am using Microsoft.Reporting.WinForms.ReportViewer the report is generated without
any problems. I can see one parameter to choose: "Kalendarzowy" (means adj. Calendar) and can
select years, the default value is "2007".
What am I doing wrong and how can I fix this error ? Does anybody know ?
Regards,
Daniel
View 15 Replies
View Related
Sep 19, 2006
When our production site was deployed on the client's WinServer2003, my webservice is throwing a "server does not exist or access denied" exception. I'm using the same connection string (typed once) as i'm using in my web forms on the user visible sections of the site. the service also works fine on my XP testing machine. unfortunately, I'm not a 2003 admin. If anyone can help, i would greatly appreciate it, trying to find what is misconfigured on the client's server is driving me bonkers.
View 2 Replies
View Related
Dec 14, 2007
I am new to both Reporting Services and Webservices implementation so I am just trying to use a simple example. I found a Webservice on the internet that returns movie information:
http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl
I am trying to call in using XML DataSource and with absolutely no luck. Here are the steps I have followed:
DataSource type: XML
Connection String: http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx
Report Data Quert:
<Query>
<SoapAction>http://www.ignyte.com/GetUpcomingMovies</SoapAction>
<Method Namespace="http://www.ignyte.com/whatsshowing" Name="GetUpcomingMovies">
<Parameters>
<Parameter Name="month">
<DefaultValue>12</DefaultValue>
</Parameter>
<Parameter Name="year">
<DefaultValue>2007</DefaultValue>
</Parameter>
</Parameters>
</Method>
<ElementPath>RunQueryResponse{}/RunQueryResult{}/diffgram{}/DataSetName/TableName</xmldp:ElementPath>
</Query>
I am getting an error: The XmlDP query is invalid. (Microsoft Report Designer)
Any help? I am trying to figure out this simple example so I can apply it to my own webservice.
Thanks
View 1 Replies
View Related
Dec 12, 2006
I want to update data on the device which has a sql server mobile database.
the main database is sql server.
I use web services to enable the mobile application to access the server.
Can anyone recommend a way of updating the data on the device without using replication? I basically want to read a dataset from the server via webservice and put this in to local db - but not row by row as too many records.
Regards
View 1 Replies
View Related
Aug 11, 2006
Hello All,
I'm not very knowledgable about SQL server so I'm not quite sure if this is possible. I want a scheduled task to be ran everyday. (Querying the Database and such). If a certain parameter is met I want a webpage, w/ code behind that will send an email, to be launched.
Is there any way to launch a web page from SQL????
Thanks in advance,
Kyle Landis
View 1 Replies
View Related
May 1, 2008
Hi
I would like to launch an application (developed by my team) from a report in SSRS, just like how a web page can be launnched by setting the Navigation property.
Any ideas?
I tried this by writing a function in a custom assembly
public static myfunc()
{
Process.Start("c:myapp.exe")
}
and calling this function from the report. This is not working.
Iam guessing it has to do with setting permissions. How and where do i need to set this?
thanks
Chitra.
View 6 Replies
View Related
Apr 14, 2008
There are so many posts that I've read both here and other sites that attempt to resolve the problem where the message "The report server is not responding. Verify that the report server is running and can be accessed from this computer" appears when browsing to http://localhost/reports but unfortunately I still have a problem with this.
In addition to the above I am also unable to connect to Reporting Services using SSMS.
The configuration tool shows no red boxes, SharePoint Integration, Encryption Keys are in blue, Initialisation is greyed out, Execution Account is yellow. The rest are green.
Please can someone tell me where to start investigating what is causing the error. I've looked in the Windows Event Log and it tells me nothing.
This is really desperate now as I've been trawling through posts etc for days.
View 6 Replies
View Related
Apr 9, 2007
Hello -
I know that you can build a Report Designer report and add URL navigation from a field. I am trying to figure out how to do this with report BUILDER. I haven't been able to do it using the UI and editing the RDL directly to match what I see in a similar report Designer report is being ignored (if I did it right).
I can put the URL into the DSV & Model as a field/attribute, but displaying the a field with a URL in it doesn't make it "clickable".
Does anyone have a trick for this? Or know that there is definately no way to do it?
Thanks in advance,
Toni Fielder
View 1 Replies
View Related
May 30, 2006
Under Books online, topic "Install client and server components on a single computer"
Configure the Report Server and install samples
3. Verify that installation succeeded by launching Report Manager. In the URL address, type https://localhost/reports or http://localhost/reports. You should see the Report Manager Home page.
I get in IE with url http://localhost/reports :
<%@ Page language="c#" Codebehind="Home.aspx.cs" AutoEventWireup="false" Inherits="Microsoft.ReportingServices.UI.HomePage" %>
<%@ Register TagPrefix="MSRS" Namespace="Microsoft.ReportingServices.UI" Assembly="ReportingServicesWebUserInterface" %>
I can see in IIS, Default Web site, "Reports" and "ReportServer" and in SQLStudio Express both tables, "ReportServer" and "ReportServerTempDB"
I am running on Windows XP SP2
View 4 Replies
View Related
Oct 24, 2007
I apologize up front since this question seems so basic but I'm really running into difficulty with it. Should there be a Visual Studio Express program to launch under Start - All Programs or do you simply have to select one of the pieces such as Microsoft Visual Web Developer 2005 Express Edition? I have seen documentation telling the user to launch Visual Studio Express yet I have nothing for that. Also, since I'm trying to become familiar with Reporting Services I suspect it's somewhere I haven't located yet, leading me to believe perhaps I'm missing something very, very basic. Thank you in advance.
View 4 Replies
View Related
Mar 3, 2007
Hi,
When I launch a report using the following url, and then make changes to the report and save it, Reportbuilder is creating another report with the same name but also including the .rdl within the name itself.. therfore I now have two reports now displayed within the report manager
http://localhost/reportserver/reportbuilder/reportbuilder.application?/Report1
Can someone please help...
View 2 Replies
View Related
