Server Error 1431 When Setting Up Database Mirroring Using Local System Accounts And Certificate Authentication
May 24, 2006
I attempted to setup database mirroring using a High Availability scenario but when I installed SQL is chose to use local system accounts for all the services. Consequently, I stubled upon a microsoft article explaining how to setup mirroring using local system accounts and certificate authentication but I am stil not able to get it to work. When I try ti initiate the mirror from the mirror server I receive an error stating "Neither the partner nor the witness server instance for database "EDENLive" is available. Reissue the command when at least one of the instances becomes available." I have checked all the endpoints and everything seems to be in order. I even checked to make sure that each server was listening on the appropriate ports and I AM able to telnet to the ports. Please help!
View 1 Replies
ADVERTISEMENT
Jan 7, 2008
Hi There
I am doing an unattended upgrade of Sql Express with Advanced Services SP1.
Before the upgrade the services run under domain accounts.
I use the following command :
start /wait setup UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER SQLACCOUNT=DOMAINUser SQLPASSWORD=p@ssw0rd ADDLOCAL=Client_Components,SQL_SSMSEE /qn
However after the ugrade the service accounts are running under local system.
Documentation is unclear, i find the following:
; The services for SQL Server and Analysis Server are set auto start. To use the *ACCOUNT settings
; make sure to specify the DOMAIN, e.g. SQLACCOUNT=DOMAINNAMEACCOUNT
; NOTE: When installing SQL_Engine 3 accounts are REQUIRED: SQLACCOUNT, AGTACCOUNT and SQLBROWSERACCOUNT.
; SQLACCOUNT Examples:
; SQLACCOUNT=<domainuser>
; SQLACCOUNT="NT AUTHORITYSYSTEM"
; SQLACCOUNT="NT AUTHORITYNETWORK SERVICE"
; SQLACCOUNT="NT AUTHORITYLOCAL SERVICE"
To my knowledge the <> is not required.
Can someone please help as i cannot get the services accounts to run under a domain user after upgrade.
Thanx
View 1 Replies
View Related
Sep 26, 2007
Hi,
Is it possible to set up database mirroring between two servers that have SQL Service running under Local system? I tried to setup mirroring between two servers running under Local system but was running into the following error:
Server or Network address cannot be reached or does not exist.
What are the pre-requisites for setting up database mirroring if the service runs under Local system? Do I have to configure certificates? Is that mandatory? Can anyone please let me know. Any other gotchas?
Thanks
AK
View 17 Replies
View Related
Dec 22, 2006
Hi, all.
here is the situation.
we designated one server as a mirrored server. this server will host all mirrored databases from different principles in different server using certificate.
1) Server A (Principle) Server B(Mirrored)
2) Server C (Principle) Server B(Mirrored)
I was able to set up mirroring between A and B. But unable to set up mirroring between C and B.
My question is "Can I grant connect on endpoint to two different host logins?"
For example, on the server B
I created two different logins for Server A and C in order to assign different certificates to two principle servers.
For Server A.
create login server_A_login with password = 'djkkajnxks';
go
create user server_A_user for login server_A_login
go
create certificate server_A_cert
authorization Server_A_user
from file = 'c:certificateserver_a_cert.cer'
go
GRANT CONNECT ON ENDPOINT::Endpoint_Mirroring TO [server_a_login];
GO
For Server C.
create login server_C_login with password = 'djkkajnxks';
go
create user server_C_user for login server_c_login
go
create certificate server_c_cert
authorization Server_c_user
from file = 'c:certificateserver_c_cert.cer'
go
GRANT CONNECT ON ENDPOINT::Endpoint_Mirroring TO [server_c_login];
GO
when I set up like this and try to start mirroring, I am getting error from server c saying, "the network tcp:serverb.corp.com can not be reached or does not exist"
But mirroring between server a and b is OK. I set up them first, then between c and b.
any ideas?
thanks,
View 2 Replies
View Related
Aug 12, 2015
I cannot get a consistent answer as to how many domain accounts would be suggested in a SQL Server 2014 installation. Previously the recommendation was a separate account for each service to provide isolation and minimum permissions for each account. It seems from what I've read that a single domain account would have something added to make it unique from SQL Server's perspective. Several still advocate multiple accounts. I don't know if they are doing so because that's the way it's always been done or if there is still some compelling reason to do so. I don't want to create unnecessary accounts simply because something is "ideal."
View 8 Replies
View Related
May 23, 2008
Hi folks.
When installing SQLServer 2005 Express, I use the following command line:
cmdline = " /qb ADDLOCAL=SQL_Engine,SQL_Data_Files SECURITYMODE=SQL INSTANCENAME=MyServer SAPWD=MyPwd DISABLENETWORKPROTOCOLS=0 SQLAUTOSTART=1 requiresmsiengine=1"
I noticed that when installing on a Windows XP machine, the installation results in a SQLServer instance which is configured with Built-in account = Network Service. However, with the same command line used on Windows 2000 machines, the configuration winds up being Built-in account = Local System. My understanding is that the default configuration is supposed to be Local System.
What can I do to ensure that the instance configuration is always Local System during the silent installation? This is required otherwise, under the Network Service configuration, it creates a messy situation to attach DBs.
Thanks!
Mike
View 1 Replies
View Related
Oct 20, 2011
I have setup database mirroring with witness server. To prevent unnecessary failover because of network slow or other issue, I changed the timeout setting as
ALTER DATABASE <Database Name>
SET PARTNER TIMEOUT 120
Which I understand if connection is broken between principal and mirror, principal database will wait for 120 second and after that only automatic failover will happen.
If this is true, it does not happen in my case. Failover happens before120 second.
View 5 Replies
View Related
May 22, 2006
I have created a database now I am setting login details for that user. I am using slq server authentication and entering a password of recommended length.
I enter my details in my webconfig file and I get -couldnot connect to database specified in connection string for sql data provider.
when I check the login properties the password has changed it appears to be the password for NT Authoritysystem, ie same length, what it is Idont know.
What am I missing?
View 4 Replies
View Related
May 17, 2007
Hi, all experts here,
Thank you very much for your kind attention.
I am wondering if we could back up the databases to any place outside of the local server system? As I found, we can only back up the database to the local server system, so we have needs to share databases on network places. Is there any method to back up the database on network place rather than first of all I have to back up the database on a local server system, then copy it to the network place, that just sounds really inconvenient.
Thanks a lot in advance for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Apr 6, 2006
Hi all,After working for weeks on a project in VB.Net, I decided to deploy atest version on a user's computer.The user's XP SP2 computer has sql server xpress 2005 installed, and myVB.net creation. Everything works without problem when the user's XPaccount is set with Administrator permissions. But when i change theuser account to Limited, the program fails with the following message:"Failed to generate a user instance of SQL server due to a failure instarting the process for the user instance. The connection will beclosed."The connection string I'm using is: "DataSource=.SQLEXPRESS;AttachDbFilename="|DataDirectory|DbTrial1.mdf";IntegratedSecurity=True;User Instance=True;Connect Timeout=30"Is there a workaround to get access for XP users with limited accounts?Many thanks :)p.s. allready tried changing in the connection string to "UserInstance=False", but then i get the error "An attempt to attach anauto-named database..... failed.. etc"And I've already tried the most common suggestion to delete the"SQLEXPRESS" folder in local settingsapplication data... but thatdoesn't do anything either :(
View 1 Replies
View Related
Jan 12, 2015
I have the Image in FTP Server Folder and i need to insert that image into my local database.
How can i do this I tried with the below Query but i shows the errors as below.
--INSERT INTO AcademyStudents (ImageURL)
--SELECT BULKCOLUMN FROM OPENROWSET(BULK'https://iconic-solutions.net/OTA/test/images(1).jpeg',Single_Blob) AS BLOB
--Where StudentIdentificationNum = 2
--GO
GOt Error
;
Cannot bulk load because the file [URL] could not be opened. Operating system error code 123(The filename, directory name, or volume label syntax is incorrect.).
View 1 Replies
View Related
Aug 24, 2015
When I try to setup mirror on a SQLserver dbase using windows Authenticated login I get error:-
Login failed for user 'SERVERBAdministrator'. (Microsoft SQL Server , Error: 4060).The login connect string however on selection of SERVERB from SERVERA has a greyed out option for using Windows Authenticated login which clearly shows Username: SERVERAAdministrator.It is odd that the error coming back is showing SERVERBAdministrator on the rejection. (somehow the machines got swapped over in the authentication) The strange thing is if you use the SQLserver studio on SERVERA to connect to SERVERB using the object browser and Windows authenticated login it all works fine without errors. clearly the Mirror software is using some other means/privs of login to establish the connection.
The two machines SERVERA and SERVERB are in the same Domain (DOM1) but they are not using a domain user account.They are using Administrator user on both independent machines. The SQLSERVER install specified both Windows and sqlserver logins. The mirror is to use Windows authenticated login.Is there some login priv we are missing The sqlserver security has allowed this type of login......
View 2 Replies
View Related
May 28, 2007
hi guys , does anyone of you have a good solution on the Error 1413: Communications to the remote server instance failed before database mirroring was fully started issue?
Best Regards,
Hans
View 1 Replies
View Related
Dec 14, 2006
I had a problem with mirroring that I only was able to resolve when I attempted to replicate instead. Replication gave me an error message that expained the problem; mirroring simply failed.
Is there any place where mirroring logs the details of what it is doing & why it is failing?
BTW, the problem was that the server name was changed after SQL was installed. Although i knew this, the forums indicated taht SQL 2005 automatically picks up the new name after it is restarted. This apparently is not true...
Thanks
Dave S
View 2 Replies
View Related
Apr 13, 2007
I have made a small asp.net project which uses a local database file as a part of the project. The project is running fine om my local machine, but when I upload it to the remote server, the login fails for the server.
I suspect this is can be solved by using sqlserver authentication. But I have now spent a lot of time trying to configure the database file to use this authentication mode. As I see it there are three possible solutions to the problem.
use management studio express to configure the local mdf file (Ecxept that I cant find out how to connect to the mdf-file) and from here change the authentication method to sqlserver authentication.
use Visual Web developer to change the authentication method (but how???)
make the windows authentication work on the server (this would probably require that mannamgement studio express connects to the remote database. (Same problem as no 1)
Help will be higly appreciated.
Bjarke
View 3 Replies
View Related
Mar 19, 2007
Hi
We are using in our company an ERP system called iScala.
This software is using SQL server as DBMS.
We would like to use the SQL mirroring feature from SQL 2005.
The software is using the SQL server instance name to connect to databases and when the Main SQL server fails the application can't connect to the Mirror instance.
Unfortunatelly we can't change the connection string (the software is provided by another company).
Do you have a solution?
Thanks
View 7 Replies
View Related
Jul 26, 2007
1.On an virtual server two virtual machines of Windows 2003+sql server 2005 developer edition named VM1 and VM2
2.The VMs are not on a domain.
3.endpoint uses windows authentication
I get the following error
Msg 1418, Level 16, State 1, Line 1
The server network address "TCP://x.x.x.x:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
and the log file contains the following
07/26/2007 19:21:22,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:19,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:17,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:14,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:12,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:10,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:09,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:08,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
07/26/2007 19:21:06,spid25s,Unknown,Database mirroring connection error 5 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.' for 'TCP://x.x.x.x:5022'.
07/26/2007 19:21:06,spid25s,Unknown,Error: 1474<c/> Severity: 16<c/> State: 1.
07/26/2007 19:21:06,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 65.'. [CLIENT: x.x.x.x]
Is there anyway i can do mirroring without certificates,
guys any pointers?
View 7 Replies
View Related
May 3, 2004
We are about to change the sa password, currently all packages and jobs rely on this account. I imagine there is probably a better architecture that we could employ to ease this process. Any suggestions recommendations?
Also any caveats I should be aware of regarding places to look that might currently rely on the sa account so that we do not need to worry about existing processes from breaking?
I think we are going to create an NT account for DTS Packages and possibly use the same account for any DTSRun jobs, does this make sense? Or is there anything to gain by having these as separate accounts? Also should this be the same account used to run the MSSQLServer process?
I tried doing a search for this information here, thinking it was already covered, but could not find anything that informative, any resources that you could point me to would be appreciated, I will look on BOL as well as MSFT to see what I can dig up.
View 1 Replies
View Related
May 30, 2007
We're getting an error where we can't add a login with the full dns name of a user - domain.xyzuser, for example. Get an error 15401, "Windows NT user or group domain.xyzuser' not found". The domain has a different Netbios name and DNS domain names, so we can add the user when we use the form "netbiosnameuser". So far so good.
Unfortunately, we have another application - Office Share Point Server whose shared services provider won't run, giving errors in the event log every 60 seconds that "Windows NT user or group 'domain.xyzuser' not found".
It looks as if SQL insists upon listing users in the form netbiosdomainnameuser, and applications that look for domain.xyzuser simply fail to authenticate.
Suggestions?
jnfranc at yahoo period com
View 3 Replies
View Related
Sep 15, 2015
I need to set up asyncronous data replication across two clustered instances of SQL 2012 across 2 Datacenters. Both the datacenters have a common domain however the vlans are different. There are only 3 small databases on the primary instance.
any issue in setting up mirroring in this case as vlans are different.
Operating system is Windows 2012.
View 2 Replies
View Related
May 3, 2008
Server A = primary SQL DBs (mirroring origination)
Server B = failover SQL DBs (mirroring destination)
For database mirroring a witness is required.
Can the witness live in another instance of SQL on server B?
View 7 Replies
View Related
Oct 2, 2007
Hi,
Re: SQL Server 2005
We have defined a local administrator to be the SQL Server and SQL Server Agent services user, and is also the job step owner for some SSIS packages I am running.
My question is, isn't by default a local administrator ALSO granted sysadmin in SQL Server? According to this link, it seems to imply this:
http://msdn2.microsoft.com/en-us/library/ms143504.aspx
However, I am having some permissions problems with the local adminstrator account (i.e. SQL Server agent account) when it runs the job. The error is that it doesn't have execute permissions on sp_dts_addlogentry.
How can this be, if it's granted sysadmin?
Thanks
View 6 Replies
View Related
Jun 29, 2007
Hi, We are trying to implement Service Broker between SQL Server Express and SQL Server on the Same machine and we are having problems with certificates. We are creating a certificate on SQL Server, backing up the certificate on a file system and then loading certificate on the SQL Server Express from the file and we are keep getting the following error: Msg 15208, Level 16, State 1, Line 1 The certificate, asymmetric key, or private key file does not exist or has invalid format.
Following script runs fine on SQL Server.
Code Snippet
use master
Create Master Key Encryption BY Password = '45Gme*3^&fwu';
BACKUP MASTER KEY TO FILE = 'C:ServiceBrokerPrivateKeyMasterB.pvk'
ENCRYPTION BY PASSWORD = '45Gme*3^&fwu'
Create Certificate EndPointCertificateC
WITH Subject = 'C.Server.Local',
START_DATE = '06/01/2006',
EXPIRY_DATE = '01/01/2008'
ACTIVE FOR BEGIN_DIALOG = ON;
BACKUP CERTIFICATE EndPointCertificateC
TO FILE = 'C:ServiceBrokerEndPointCertificateC.cer'
Following script runs on SQL Server Express:
Code Snippet
Create Certificate EndPointCertificateC
From FILE = 'C:ServiceBrokerEndPointCertificateC.cer'
WITH PRIVATE KEY (
FILE = 'C:ServiceBrokerPrivateKeyMasterB.pvk',
DECRYPTION BY PASSWORD = '45Gme*3^&fwu'
);
If we run the script other way around, it works fine. If we use the SQL Server on some other machine, the script works fine. But only on the same machine, it throws this error. We made sure the permissions and everything. Let us know if there is any work around or what are we doing wrong.
Any help is appreciated. Thank you,
View 4 Replies
View Related
Apr 24, 2006
Hi,
I'm running W2K3 SP1. The MDAC Configuration Checker reports MDAC 2.8 SP2. The only discrepancy is MSADCO.DLL, where the expected version is 2.82.1830.0 and my actual version is 2.82.2651.0 (svr03_sp1_gdr.060301-1546).
The error message I'm getting when I use the ODBC Administrator dialog to set up a new entry is: "The setup routines for the SQL Server ODBC driver could not be found. Please reinstall the driver."
This is followed by a dialog titled: "Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed." The body text of the dialog is "Component not found in the registry."
Does anyone have any idea how I can repair this?
Thanks,
View 13 Replies
View Related
Sep 17, 2015
I have a SQL Server 2014 installation on a server (CHRIS-PCCHRISSQL).I have SQL Server 2014 management studio installed on local server called Pootle.I have gone through the configuration on server (CHRIS-PCCHRISSQL) inc the following:
(1) I have set up a user on CHRIS-PCCHRISSQL called sqladminuser at server level with the Server Roles of 'Public' and 'SysAdmin'
(2) The computers are both on the same homegroup.
(3) On Chris-PC , I have opened up the firewall port 1433 as Inbound Rule
(4) On Chris-PC, Within SQL Server Configuration Manager,the 'SQL Server Network Configuration for Protocols for CHRISSQL' have been set up as follows:
- The TCP protocol is enabled
- I have set up IP2
as follows:
Active: Yes
Enabled: No
IP Addres: 192.168.0.3
However when I try to connect from SQL Server Management Studio 2014 on my local machine Pootle to Chris-PCCHRISSQL using SQL Server Authentication with the user sqladminuser
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)how to set up a remote connection from SQL Server Management Studio
on my local machine Pootle to CHRIS-PCCHRISSQL
View 6 Replies
View Related
Jul 23, 2015
Do we still need the below service accounts in SQL 2008+ version even if we have proper SQL service accounts added in the logins?
[NT AUTHORITYSYSTEM]
[NT ServiceMSSQLSERVER]
[NT SERVICEReportServer]
[NT SERVICESQLSERVERAGENT]
[NT SERVICESQLWriter]
[NT SERVICEWinmgmt]
View 0 Replies
View Related
Nov 29, 2007
Hi all,
I am soon to be setting up a new server that is to have SQL Server 2005 on it.
The server has 2 x Quad Core Xeon CPUs, 16Gb of RAM and 2x73Gb HDDs in RAID1 configuration - the whole running under Windows Server 2003 x64. (The data will be on an external RAID disk array, so the 73Gb is just for the O/S and utils.)
I was reading that Windows will, by default, create a page file of (RAM size) + 1Mb, though my old-school education says use a page file of 1.5 times the RAM size. Then again, 16Gb is a whole pile of RAM and do I really want a page file of 24Gb when I only have 73Gb of HD space..? Is it worth partitioning the HDD into two or just leave it whole?
I'm looking for guidance from knowledgeable types (that's you chaps) who could offer advice on how best to implement SQL Server on a system of this spec.
I've also thought about assigning different processor affinitie to Analysis Services and the Database Engine - does anyone have any strong thoughts either way on the benefits of this?
Many thanks,
Robo
View 2 Replies
View Related
Oct 31, 2006
Hi:
A very stupid question but want to see if i have an answer.
Is it possible to run SQL Server Service and SQL Server Agent Service under local system(not Domain account) without granting SA Permissions on the server. is it ever possible to run by just granting some registry permissions and not making BUILTINAdministrators a SA on the server.
Thx
AK
View 4 Replies
View Related
Jul 27, 2006
I have an application I developled for a shopping cart function using Wrox ASP.NET book as a guide. I have everything working great on my local system using SQL 2005 Express. When I move the app to an IIS 6.0 Web Server with SQL 2005 Express installed I get the following error.
Line 103: Public Overridable Property Cart() As Wrox.Commerce.ShoppingCartLine 104: GetLine 105: Return CType(Me.GetPropertyValue("Cart"),Wrox.Commerce.ShoppingCart)Line 106: End GetLine 107: Set
It has some comments up top about not being able to establish a connection to the SQL Express Database. I have made the changes to allow TCP/IP and Named-Pipes
The App has to be connecting to the database because it displays grid views during the order process.
The Database is located in the App Data folder
IIS is set to Integrated Authentication and configured as a Web Application.
Can someone please tell me what is wrong.
thanks.....
View 3 Replies
View Related
Feb 11, 2014
I setup SQL Server 2012 on Windows Server 2012 with the service accounts in the local Administrator group, but now that I'd like to remove the accounts from this group I'm finding they don't have the appropriate access to the network storage. notes on setting the per-service SID's for SQL (SQL Engine, Analysis Services, Reporting Services, and Agent Service) so they can read the Data, Log, and TempDB mount points?
View 2 Replies
View Related
Apr 18, 2008
Hi folks!!
I am new to installation of SQL Server 2005..I wanted to know while selecting Service Account Screen why Avoid running SQL Server Agent as the Local System account.????
T.I.A
View 2 Replies
View Related
Jan 17, 2007
Hi, I hope this is in the correct category. I have two .mdf files. aspnetdb.mdf and emotiveonline.mdf. My host provider can only give me one database in sql server express 2005. Now I am no genius when it comes to programming and that kind of stuff but those two mdf files would be seen as 2 databases right? What I would like to know is that if I can but everything into one mdf file and how would i go about doing that. My website is almost finished and just thought about this now. Would like to do the changes as soon as possible so that I won't sit with a humongous problem later on. Thank you in advance. Kind regards,Ruan Rossouw
View 2 Replies
View Related
Apr 8, 2008
I am reading kb 934164. I am confused about (creating system administrator) domain user accounts....
IN SQL 2005 USER PROVISIONING Tools
under kb934164 8e type a window account by the following format
domain/user 8k Type a windows account by following format domain/user
DO I simply type domain/user or do I actually Type my domain/user account
What is domain user?
In other words where does domain (PASSWORD) come from?
where does user(PASSWORD) come from?
I have being trying to find the answer for this
Is there anything else I need to be prepared for in user
provisioning. By the way do you need to turn off uac in vista while installing
sql 2005....Thanks Is there any examples of this? I just want to get it right....
View 6 Replies
View Related
