Today, my server began refusing connections for no apparent reason. I'm getting 2 different errors.
1. Server rejected the connection; Access to the selected database has been denied. (from one remote DSN)
2. Client unable to establish connection. (from another DSN)
It seems as if my server has lost it's mojo!!?? I have no clue as to why this is happening all of a sudden. Please help.
thanks,
Joe
Also, is there a better way I can trace my SQL Server ODBC errors (other than through Profiler)?
Here is the following mind-numbing problem I have (and wished I did not have to experience)
A set of 2 SSIS packages is scheduled to run in a sql server agent job on the same server. Both packages use an environment variable that point to a package configuration file. In this file there are 2 connections, one to a sql server with a sql server user id and passwordn, another to an AS400 DB2. Both packages are deployed on the same server in SSIS server under MSDB sql storage, with package protection level set to 'rely on server storage and roles for access control'.
Today the connection to the As400 needed to change, it is now connected to another AS400 server. The packages have been modified to use the new connection. In the configuration file the old connection has been commented out and the new connection string was added, the connection itself was given a new more meaningfull name in the packages.
Running the packages from visual studio 2005 works. After testing I have deployed the packages to SSIS server in MSDB storage.
Now when I start the sql server agent job that runs these packages, the job quits with an error, in the history I see an error message that it failed to connect to the sql server with the given sql server user account.
When I the step in the sql server agent job properties for both packages, under the Tab 'Data sources' I see that it is using the new AS400 connection. I can also see the connectionstring for the sql server with the user id (but no password).
To make it possible for my packages to run (the users are waiting for the data) I have solved it like this:
- under the 'configurations' tab I have added the name of my package configuration file.
- i did this for both packages in both job steps
when I run the job , it works without problems.
Now , my question is: I have hardcoded the pathname for the package configuration file in my job. Instead of the package using the environment variable to find th epackage configuration file. I would prefer my packages , when in a sql server agent job to also use the environment variable. What can I do to make this happen?
When using jdbc with IntegratedSecurity, I run into this problem when the machine is not part of a domain & gets its IP address via dhcp. Is this expected behavior or a bug in the jdbc driver.
The SQLServer and client application are installed on the same machine and a local admin is logged in, running the client app.
If I change one of the two parameters mentioned above, the connection can be established leading me to believe this may be intentional for security issues. Am I correct?
I'm new to using xp_sendmail, and here is what I get... ===================================== EXEC master..xp_sendmail @recipients = 'amccollough', @subject = 'EMAIL TEST', @message = 'This is a test' (result="Mail Sent", it works fine) ===================================== But this one fails... ===================================== EXEC master..xp_sendmail @recipients = 'amccollough', @subject = 'EMAIL TEST', @message = 'This is a test', @query = 'SELECT * FROM INFORMATION_SCHEMA.TABLES' (result="Server: Msg 17969, Level 16, State 1, Line 0 Unable to login to SQL Server.") ===================================== I've tried tons of variations with adding in @dbuse and @set_user, and am totally lost as what to try next. Anybody have suggestions?
I have a couple of queries that i run on my server but i need to automate them now. I have created a new job in the sql agent jobs and set up my steps accordingly.
My queries all run in a query window without trouble and they also parse in the command window of the sql agen job-step screen. When I run them manually, it fails with the first query moaning about my variables etc etc.
Is there some sort of limitation that i am not aware of or something?
THe unique Id column is set to identity seed. Yet when transfering 1500 records it fails to stuff them all becuase it says there is a NULL in unique id column. "Cannot insert the value NULL into column UID column does not allow" Yet in the transformation screen I am setting the UID column to <ignore> meaning I do not have that value in my source and I am wanting the destination table to do it's thing and incrememnt by 1 the identity seed. Is this common? THe source and destination tables are in the same databes.
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
Hi there, Here we have got a asp.net application that was developed when database was sitting on SQL server 6.5. Now client has moved all of their databases to SQL server 2000. When the database was on 6.5 the previous development team has used oledb connections all over. As the databases have been moved to SQL server 2000 now i am in process of changing the database connection part. As part of the process i have a login authorization code. Private Function Authenticate(ByVal username As String, ByVal password As String, ByRef results As NorisSetupLib.AuthorizationResult) As Boolean Dim conn As IDbConnection = GetConnection() Try Dim cmd As IDbCommand = conn.CreateCommand() Dim sql As String = "EDSConfirmUpdate" '"EDSConfirmUpdate""PswdConfirmation" 'Dim cmd As SqlCommand = New SqlCommand("sql", conn)
cmd.CommandText = sql cmd.CommandType = CommandType.StoredProcedure NorisHelpers.DBHelpers.AddParam(cmd, "@logon", username) NorisHelpers.DBHelpers.AddParam(cmd, "@password", password) conn.Open() 'Get string for return values Dim ReturnValue As String = cmd.ExecuteScalar.ToString 'Split string into array Dim Values() As String = ReturnValue.Split(";~".ToCharArray) 'If the return code is CONTINUE, all is well. Otherwise, collect the 'reason why the result failed and let the user know If Values(0) = "CONTINUE" Then Return True Else results.Result = Values(0) 'Make sure there is a message being returned If Values.Length > 1 Then results.Message = Values(2) End If Return False End If Catch ex As Exception Throw ex Finally If (Not conn Is Nothing AndAlso conn.State = ConnectionState.Open) Then conn.Close() End If End Try End Function ''' ----------------------------------------------------------------------------- ''' <summary> ''' Getting the Connection from the config file ''' </summary> ''' <returns>A connection object</returns> ''' <remarks> ''' This is the same for all of the data classes. ''' Reads a specific connection string from the web.config file for the service, creates a connection object and returns it as an IDbConnection. ''' </remarks> ''' ----------------------------------------------------------------------------- Private Function GetConnection() As IDbConnection 'Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection conn.ConnectionString = NorisHelpers.DBHelpers.GetConnectionString(NorisHelpers.DBHelpers.COMMON) Return conn End Function in the above GetConnection() method i have commented out the .net dataprovider for oledb and changed it to .net dataprovider for SQLconnection. this function works fine. But in the authenticate method above at the line Dim ReturnValue As String = cmd.ExecuteScalar.ToString
for some reason its throwing the below error. Run-time exception thrown : System.Data.SqlClient.SqlException - @password is not a parameter for procedure EDSConfirmUpdate. If i comment out the Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection and uncomment the .net oledb provider, Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection then it works fine. I also have changed the webconfig file as below. <!--<add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;Auto Translate=True;Persist Security Info=False;Provider="SQLOLEDB.1";' />--> <add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;' />
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration. Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"... The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
could anyone guide me on how to allow, ceate rule for sql server 2005 remote connections to work. i already configured my sql server to allow remote connections and also my router, it is only in isa that is blocking the connections.
I am trying to connect to Microsoft SQL Server 7.0 - Standard Edition through Query Analyzer. I am doing multiple query windows in order to have multiple connections to SQL Server. I cannot seem to get anymore connections than 10. I have increased the licenses to 20 and I have tried to disable and stop the License Service. I have rebooted the server after making these changes and neither seems to work, I cannot establish more than 10 connections. Can somebody help me? Thank You.
I need to put a script together that would tell me how many connections to SQL Server there are at any given time. Which table would store this info? Thanks.
Hi Guys need your expert advise on this. in my previous company in our application we used to have 1 sql server connection open all the time to access database .
in current company ,framework does it differently like opening connection to database only when needed and closing it straight away.when you look at profiler when doing multiple things in our app one will see many connections opened by our application.
my question is which approach is good for performace ? Thanks for advise.
I have to install an application on 5 different client machines. I have 1 Server machine. As of now, what is happening is, only 2 of the client machines are being able to connect to the Server Machine.i.e. only 2 client machines are detecting the server. The other machines are not even registering the server.
Let me know if there is any property or setting taht needs to be tweaked for this.
I am using For Each container loop to read set of data in to variables and populating my WMI reader Task. WMI reader task uses WMI connection. I am assigning the Server Name for the WMI connnection during the run time of for each loop.
Expression for WMI Connection is like that
Expression
ServerName @[User::WMIConnection]
I have verified the my @[User::WMIConnection] variable has the proper server name like \servername but it is not poulating the serverName filed of WMI connection.
I also tried to assign the ServerName property using Script Task but DTS.Connection("conn") does not have the ServerName property.
What are the maximum number of user connections achievable for sql server 2000 (w/ win 2000 adv server), and how are they managed - compared with sql server 7.0 (w/ win nt 4.0)? Our group is looking at upgrading our dbase server from sql server 7.0 to sql server 2000.
This is probably a really obvious question but I have been struggling with answering it for about two days now. (I may even be in the wrong forum) I work in a company with an internal network set up. I have been trying to connect to our website via FTP and it has worked ... well it did in the beginning. I think the server that our website is hosted on is a Unix server - this is a guess from reading the FTP transcripts of the various programs I've downloaded and tried out in an attempt to connect to it.
What happened:
I was working on an .ASP page in Dreamweaver, hit save without thinking, realised I wanted to make a few additional changes before uploading it onto the server, cancelled the transaction and voila. I haven't been able to connect to the remote server since.
Depending on the FTP program that I am using, I get a connection error along these lines:
- "Connection to the server was reset" "The server may temporarily be down or unavailable or not accepting connections"
I am a big newbie at this. I have turned off the windows firewall and tried turning on and off passive IP. I can connect from home but not from inside the building which has me think this has to do with a stray setting somewhere. My housemate suggested I try using the "telnet" command from DOS and see can I get any sort of connection from work. If I can't, he said, it's probably a firewall on the internal network itself.
Hi folks,Perhaps every 100 calls to DB i get 1 error message like this:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" i am using SQL 2000 and am wondering why this happens.I appreciate your help.Leo.
I am not sure if this is actually a sql connection I didn't dispose of.The database the app use is franchise_search, login testHere are the results of sp_who before I start the web server and run the page1 0 background sa 0 NULL RESOURCE MONITOR 02 0 background sa 0 NULL LAZY WRITER 03 0 suspended sa 0 NULL LOG WRITER 04 0 background sa 0 NULL LOCK MONITOR 05 0 background sa 0 master SIGNAL HANDLER 06 0 sleeping sa 0 master TASK MANAGER 07 0 background sa 0 master TRACE QUEUE TASK 08 0 sleeping sa 0 NULL UNKNOWN TOKEN 09 0 background sa 0 master BRKR TASK 010 0 background sa 0 master TASK MANAGER 011 0 suspended sa 0 master CHECKPOINT 012 0 background sa 0 master BRKR EVENT HNDLR 013 0 background sa 0 master BRKR TASK 014 0 sleeping sa 0 master TASK MANAGER 015 0 sleeping sa 0 master TASK MANAGER 016 0 sleeping sa 0 master TASK MANAGER 017 0 sleeping sa 0 master TASK MANAGER 018 0 sleeping sa 0 master TASK MANAGER 020 0 sleeping sa 0 master TASK MANAGER 022 0 sleeping sa 0 master TASK MANAGER 024 0 sleeping sa 0 master TASK MANAGER 051 0 sleeping NT AUTHORITYSYSTEM HPDEV 0 msdb AWAITING COMMAND 052 0 sleeping sa HPDEV 0 ReportServer AWAITING COMMAND 053 0 sleeping sa HPDEV 0 master AWAITING COMMAND 054 0 sleeping sa HPDEV 0 ReportServer AWAITING COMMAND 055 0 runnable sa HPDEV 0 master SELECT 0 then I run the page and all I do is using (m_sqlConn = new SqlConnection(m_strSQLConnect)) { m_sqlConn.Open(); //Log_History(); //FillCompany_DropDown(); //m_sqlConn.Open(); //BuildCategoies(); }I open the connection never use it and return the using should close the connection.But after I close the page sp_who add the line56 0 sleeping test HPDEV 0 Franchise_Search AWAITING COMMAND 0Is this connection pooling or am I missing something?No other app or anything can use the test connection I just made it and changed the password. Jon
seems a lot of people are having this problem but none of the solutions i tried has worked so far. I want to develop asp.net applications at my home pc running Win Xp pro SP2. I use MSDE as the database server and manage it with sql server enterprise manager. I do all the programming in Delphi 2005 and I run IIS 5.1, all on the same PC. Now...if I build a test windows application and try to connect to the database with a connection object or UDL file, winnt authentication works. If I then try to connect through an asp.net application, where I have the connection string coded in the .aspx file I either get a "login failed" or "not trusted sql server connection". I have tried to set up login accounts on Enterprise manager both as winnt authentication or sql server authentication but none has worked with asp.net (no problem with windows apps). Funnilly I don't have that problem at work, though the sql server at the office is on a separate pc. I know many people face this problem, can anyone help me out? thanx in advance
I am using Access 2000 to link tables from SQL Server. The tables are linked using ODBC DSN`s. I am running a query to return some rows to Access, but once I have returned the rows, I want to drop the linked table connection to SQL Server, because it is locking a table on the server. I think I need to write a bit of VBA code, but I don`t know where to start. Any ideas would be greatly appreciated. Thanks.
We have an application that runs against SQL Server 6.5 or 7.0. At one location that was recently upgraded from 6.5 to 7.0 we have a problem with the user connections to SQL Server not terminating when the user terminates the application. At some point, after several days, they are forced to bounce the server to eliminate the errant connections becasue SQL Server tells them they have the maximum number of connections. This only happens at one site and it happened under 6.5 as well. At all other sites, the connections terminate when the application terminates. Any ideas????
I am using SQL Server 6.5 (service pack 3) on an NT 4.0 (service pack 3). It is being used as the back-end database server for Solomon IV (accounting package from Solomon Software). The client machines eventually lock-up after limited activity. The first user to lock seems to do so when they issue a save, once they are locked all other users lock. In SQL activity log the processes has several tables locked. If this process is killed, the other users seem to free up. The only error message found in SQL errorlog is an ODS Unable to write to ListenOn "pipe.sqlquery". This message seems to have been occuring for some time though (prior to the lock-up problems).
The only thing (I`m aware of) that changed is many of the clients where put on a 100Mb LAN and the database was expanded from 1G to 2G because it ws almost full.
