Service Manager Won't Start After Reboot
Jun 30, 2004
Got an issue:
I am running SQL Server 7.0 on a Web server and recently the SQL Server has been acting up. Basically what happens is every time the server is restarted the Service Manager fails to restart. I even get an error telling me that the service failed to start. So, when I log back in I have to physically restart the Service Manager. I have the services set to start automatically. Can anyone direct me where to look...perhaps a SQL Server log that might give me a clue. My application and error logs only tell me that it stops. Any ideas?
View 2 Replies
ADVERTISEMENT
Jul 20, 2005
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies
View Related
Apr 27, 2006
SSIS doesn`t start after applying SQL Server 2005 SP1
I get an error Message in event log
event id 7000 source: Service Control Manager Type: Error
Message:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
regards
Lothar Belle
View 4 Replies
View Related
May 4, 2007
This is a really strange problem. There are some reports that work fine when I click the print button provided by the Report Manager but trying to print the report by clicking on print button located by the export causes my computer to reboot. Is there a resolution?
The report can be successfully printed if exported to pdf.
View 3 Replies
View Related
Aug 22, 2007
This computer gets set to autostart the SQL Server Service, which is set to local, (have also tried local network and user specific), and everything works fine. But when it gets rebooted, the service refuses to start.
We disabled the Mcafee and Windows firewall. No effect.
The SQL Browser and Full Text Index Services start automatically just fine.
Anyone have any experience with this?
Thanks,
Pat
View 3 Replies
View Related
Apr 29, 2015
After I have set the maximum sql server memory in sql server 2014 using sp_configure, do I need to reboot whole server or restart sql service?
View 4 Replies
View Related
Oct 10, 2007
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
View 29 Replies
View Related
Jul 20, 2005
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies
View Related
Dec 6, 2006
IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies
View Related
Feb 20, 2006
sql 7.0
unable to start the enterprise manager.
getting "sqlctr70.dll errors"
cannot restore databases until enterprise comes back up.... any ideas????
View 2 Replies
View Related
Jul 31, 2006
Can any one help me to solve this problem, I WAS ENABLE TO START THE Sql ENTERPRISE MANAGER
View 7 Replies
View Related
Oct 11, 2001
Something very weird happened this morning... I booted my computer as usual, but for some reason SQL service stopped by itself. I tried to start it again, but it just doesn't respond. I open up Service Manager, clicked on refresh services, but still no response. The "start service" button is available for me to press, but when I press it it doesn't seem to do anything.
Note that sql service was running last night as I switched off computer. I haven't changed anything since.
Any clues, guys?
View 3 Replies
View Related
Apr 13, 2006
hello forum,
i have problem after installing SQLServer 2000 Developer Edition.
i try to start the service from Service Manager window, but i can't start it. It says:
"The service did not start due to a logon failure.
An error 1069 - (The service did not start due to a logon failure.)
occured while performing this service operation on the MSSQLServer service."
please help me to solve this problem. i'm getting a little frustated
View 3 Replies
View Related
Jun 5, 2001
I cannot understand why I cannot get my sql mail to work properly. It was working fine a couple of days ago. My mail profile is setup using Outlook. The only problem is that when I go to services and check the Mssqlserver & sqlserveragent, they are now logging in as the system account, but when I attempt to change them to the administrator account it says error 1057 occured: the account name is invalid or does not exist, yet it does. Anyone have any idea how to rectify this? this is what is on the error log:Error: 17919, Severity: 18, State: 1
2001-06-05 14:09:16.33 ods Invalid session..
2001-06-05 14:09:16.34 ods Error: 17951, Severity: 18, State: 1
2001-06-05 14:09:16.34 ods Failed to start SQL Mail session..
Thanks,
Jerry
View 1 Replies
View Related
Jan 18, 2001
Hi,
I work on a product installed on a CD ROM. I would like, if the costumer installs our product for a SQL Server database, to know how, with a batch,
starts the necessary SQL Services if they aren't started yet when we run our Java application.
Thanks for your answers
Best regards
Axel
View 1 Replies
View Related
Aug 25, 2000
Hi,
I am trying to set properties on a SQL Server7, but when I get to the tab for 'Startup Service account', it is greyed out. Also, the same for properties for SQL Server Agent.
Why can't I change it?
To schedule jobs, and have SQL mail, don't I need to set up a Startup Service Account?
Thanks for your help,
Judith
View 4 Replies
View Related
Jun 28, 2004
Hi,
I managed to screw up one of my sql servers the other day, so I decided to re-build it. I managed to re-install sql server, patch it up to the correct level and restore the master database, but now the sql service wont start at all
Any ideas as to why this has happened.
I am using sql server standard edition with win2000 server.
Thanks
View 3 Replies
View Related
Sep 28, 2005
I restarted the MSSQLSERVER service and SQLSERVERAGENT will not restart.
I get the following error.
Could not start the SQLSERVERAGENT service on Local Computer.
The service did not return an error. This could be an internal Windows erroror an internal service error.
If the problem persists, contact you system administrator.
Well the system administrator has no idea.
I am new at this.
please give me a hand.
View 3 Replies
View Related
Jun 5, 2015
We came across a biggg issue with SQL Agent service on one of our SQL Server 2012 production servers. Suddenly, it stopped working. So we just thought of disabling and enabling the service, but once we disabled and try to set automatic (before starting it), gives us error message "The Remote Procedure Call Failed [0x800706be]".
View 1 Replies
View Related
May 1, 2008
I am unable to start SQL service on my system after i rebooted it
following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do
following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.
View 8 Replies
View Related
Mar 17, 2008
I successfully installed SQL Server 2005 and then used the ALTER DATATBASE statement to move around my data and log files for Model, MSDB and TEMPDB. I stopped SQL SERVER Services and physically moved the files to their new locations.. now the service won't start? I get this in the SQL Server ERROLOG:
Starting up database 'model'.
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'E:MSSQLAMLDataFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open failed: Could not open file E:MSSQLAMLDataFiles for file number 1. OS error: 5(Access is denied.).
2008-03-17 15:57:01.29 spid4s Server name is 'KOCSQLDEV01AML'. This is an informational message only. No user action is required.
2008-03-17 15:57:01.29 spid9s Error: 5120, Severity: 16, State: 101.
2008-03-17 15:57:01.29 spid9s Unable to open the physical file "E:MSSQLAMLDataFiles". Operating system error 5: "5(Access is denied.)".
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'F:MSSQLAMLLogFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
I can log on to the Server with the account that starts the services and open the .mdf and .ldf files in Notepad.. not sure what's going on.. I then gave the Domain Account that starts the Services Full Control on each of the volumes that I moved the files to.. I checked down to the file level to make sure that the permissions propogated.. the service still won't start.. can someone help?
View 7 Replies
View Related
Jul 23, 2005
Am using SQL Server2000 on WINXP. Have been using this DB since it becameavailable. Today, all of a suddent, the Service was not 'started,' even thoI had it marked as 'automatic.' Tried to manually start the service, andreceived the message that some service start and stop if there is no workfor them to do.Don't know why this has happened. I rebotted my computer, but still can notget MSSQLSERVER 'started.' Can anyone help me here?
View 1 Replies
View Related
Jan 3, 2006
I've been completely unsuccessful so far in getting the SSIS service to start under normal circumstances.
I've got the SQL 2005 RTM DVD and a clean, brand-new installation of
Windows 2000 Server (Service Pack 4). All system requirements have been
met according to the SQL installer. I choose to install just the
Database Engine, SSIS and the Workstation components, all other
installation options are defaults except Services, which are set to use
a Domain User account.
The install completes without problems and the SQL Server & SS
Agent services start suceessfully, but the SSIS service refuses to
start (timeout). If I change the service to use LocalSystem, the same
happens. If I make the Domain User (DOMAINMisterSQL) account a member
of Local Admins on the server, the service still won't start.
If, however, I use a Domain Admin account, the service does start, so it appears to be a security issue, but how can I configure the service to start with fewer privileges?
This problem has appeared on each machine I've tried this on, four to
date, so it's not related to the particular setup of this server. I've
searched the web for weeks for a solution with no success; any help
would be greatly appreciated.
View 10 Replies
View Related
Oct 4, 2006
Ciao,
I'm newbie in synchronization so yoy must be patient (also for my english).
I'm trying to enable synch between an Access database on the thesktop and a mobile SQL Everywhere corresponding one..
I downloaded the Access Synchronizer but the example included give me the 2148012867 error
Looking for the ssevaccesssync service, I found that in my system (2000 Server) the library Httpapi.dll was not present.
I downloaded that library on the "system32" folder but when I start that service I get the error
"The procedure entry point RtlInitUnicodeStringEx could not be located in dynamic library ntdll.dll"
Any Idea
Thanks
Marcello
View 3 Replies
View Related
Mar 23, 2007
Hi, im running reporting service 2000 on a sql 2000 server. Everything worked fine last week, now i cannont access the reporting services. I tried manually starting the service but it will not start. Any help would be appcreciated.
Thanks
View 2 Replies
View Related
Apr 21, 2008
I had a working VS Express 2005 system 2 years ago and have not done any development on it since. Recently I wanted to enhance the application I had developed and so updated my system to VS EXpress 2008 and now can't start my database service. What do I need to do to get access to my database again?
I am running on an up to date Windows XP Pro system
Dennis J.
View 9 Replies
View Related
May 4, 2006
I am currently working on a windows 2003 server with SQL2000 (developers edition). My Sqlserver and Report Server are on two different machines.
This was working yesterday but frustratingly not this morning.
Everytime I try to start the Reporting Server service, it gives me the following message:
"The Report Server service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
Is there a way around this??? - any help would be greatly appreciated .
View 10 Replies
View Related
Aug 9, 2006
I have just installed SP1 and now the IS service will not start at all. I have tried using the LocalSystem account and an account with domain admin rights that I use to run all the other SQL Server services.
Before the SP was applied the service was running fine.
I have tried starting it from the command prompt, services and configuration manager but none of them work, I get the following error message:
"The service did not respond to the start or control request in a timely fashion"
This message is also in in the System Event Viewer, but there are no messages in the Application Event Viewer for the IS Service so I am now officially stumped (not to mention frustrated)
Please help!
View 4 Replies
View Related
Feb 10, 2006
I tried the instructions in sqlexpress's WebLog to connect to a remote database.
Using SQL Server Configuration Manager I enabled TCP/IP and then tried to start the browser service.
When I right clicked the icon, all the options (Start,Stop,etc) are grayed out.
Can anyone help me with this, please?
Thank you
View 5 Replies
View Related
Dec 14, 2006
Dear friends,
I am working in .net windows application with sql server 2000. My problem is like some times sql server service automatically stoped when restart my machine.Then i start the service manually.after that if i restart my machine it not affect the service.I mean only at first time restart the machine make this problem. Anybody know any solution for this problerm?.
Also how can i anable TCP/IP through application.
Thanks & Regards
Jesseja
View 1 Replies
View Related
Jan 17, 2000
I just uninstalled SQL 6.5 from my server (Now totally running in 7.0 Mode) and now I can't get the MSDTC service to start again. I get the error "Could not initialize the MS DTC XA transaction manager" (In Application Log)... and error "The MSDTC service terminated with service-specific error 3221229574." (In system log). I believe that somehow MSDTC got uninstalled and I don't know how to reinstall only MSDTC? Any suggestions would be appreciated...
Thanks for any help
View 1 Replies
View Related
Apr 7, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
