My MSSQL service cannot start !!! The other ones start normally, but MSSQL goes from stopped trough enabling and back to stopped. Nothing works !!! I'm really desperate. Note that the same thing happenes with MySQL.
BTW, my machine:
AMD Athlon XP 1700+
256 MB RAM
Windows XP with SP1 and some critical patches installed
Visual Studio & SQL Server 2005 Beta
Hi
I have been running service broker between 3 initaitors and a single target witha forwarder for some time.
Everything works 100%, i use persistent conversation and all queues and transmission_queues are clear. Everything works 100%.
However while running profiler on the forwarder i see the following errors every now and again. Actually every time a message succesfully gets to central i see this error:
On the forwarder: Broker Connection: EventSubClass 4 - Closing :
An error occurred while receiving data: '64(The specified network name is no longer available.)'.
Database ID 1 : master:
ObjectName : tcp:11.45.101.100 - this is the target
i sometimes see the exact same error with a initiator IP.
I am very confused becuase everything is working 100%, queues and transmission queues are all clear.
Why do i see this error ?
Thanx
Hi All,
Are there samples for working with Inegration Service ?
As I see in shipped samples are C# and VB only.
Particulary I need a C++ code for "Enumerating Available Packages Programmatically"
Thanks a lot.
Sergiy
I was trying to send a message on a different instance in the network using service broker. I have created the endpoint and route both the side. I could see that the messages are in the transmission_queue in the sender side with no error in the status.
What could be the reason.
I am doing the following:
CREATE ROUTE inst02
WITH
SERVICE_NAME = 'SERVICE2',
ADDRESS = 'tcp://10.14.43.149:2341'
in the send script i am using this:
BEGIN DIALOG CONVERSATION @dialog_handle
FROM SERVICE [SERVICE1]
TO SERVICE 'SERVICE2'
ON CONTRACT [MainContract] WITH ENCRYPTION = OFF ;
in the sending side if i change the endpoint's authentication as windows kerberos , then i get thefollowing error in the transmission queue:
"Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 66."
I also have given access to the remote user on this endpoint(on the recever side) using this :
GRANT CONNECT ON ENDPOINT::Endpoint_test to paras
I am executing the sending side send script using the same user wich has access to the remote endpoint.
Can some one resolve this issue.
Thanks
I have an instance of SSRS that will not run my report subscriptions if it is using a dedicated domain account I made for the express purpose of using it to run this service.
If I have SSRS use my personal domain account as the service account, my subscriptions run correctly. If I have SSRS use this other domain account, the subscriptions do not run.
What else do I have to configure to make this run correctly not on my personal account?
Error message below.
"ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: AuthzInitializeContextFromSid: Win32 error: 5; possible reason - service account doesn't have rights to check domain user SIDs., Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ;"
I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
I have an almost virgin install of SQLExpres running on a WIN2K Pro system.
Have been able to create and connect db to Access 2000 without problem.
Now I wish to extend to remote connections. Using Surface Area Configuration tool, I changed Remote Connections to Local and Remote.
Whenever this setting contains TCP/IP and I try to restart the service I receive the following errors:
System Log:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 10013.
Application Log:
Server TCP provider failed to listen on [ 'any' <ipv4> 0]. Tcp port is already in use.
TDSSNIClient initialization failed with error 0x271d, status code 0xa.
TDSSNIClient initialization failed with error 0x271d, status code 0x1.
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
If I change back to Local Connections Only or Local and Remote using named pipes only, the service starts up again without a problem.
After five days of investigating, researching, reinstalling and waiting I have to ask for help.
Any suggestions or leads?
Thank You in advance.
I have a VM with SP2013 and SQL Server 2012 SP1. I have installed the powerpivot plugin SP1.But when I run the PowerPivot for SharePoint 2013 configuration tool.
View 3 Replies View RelatedHello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running:
Date 17.04.2007 16:42:10
Log Job History (FailureNotificationJob)
Step ID 1
Server MSK-CDBPO-01
Job Name FailureNotificationJob
Step Name MainStep
Duration 00:00:00
Sql Severity 16
Sql Message ID 6522
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: CORPmssqlserver.
A .NET Framework error occurred during execution
of user defined routine or aggregate 'StartNotification':
System.Security.SecurityException: Request for the permission of type
'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand,
StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server.
I have the following guesses:
1) CORPmssqlserver may have not enough permissions to call web service
2) Something wrong with SQL Server account's permissions
2) Something wrong with SQL Server Agent account's permissions
I will take the will for the deed. Thanks.
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
Has anyone any comments or the same needs ?
I have a initiator and a target service broker peer.
Both are controlled by a C# unit test. The initiator uses the Microsoft.Samples.SqlServer class. The target service uses stored procedure activation.
Sending a message from the initiator to the target, saves the content of the message, along with its conversation handle in the target's database specific table.
The unit test needs - at a later time - to instruct the target to send a message back on the same conversation handle to the initiator service.
For this the C# unit test creates a Conversation off of the saved conversation handle:
Service client = new Service("cleintservicename", conn, tran);
Conversation dialog = null;
dialog = new Conversation(client, convHandle);
Sending the message on this dialog generates an error "Message body: <Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8495</Code><Description>The conversation has already been acknowledged by another instance of this service.</Description></Error>".
Is the error due to the fact that a service - using the activated stored procedure already picked up the conversation, so that a new reference to the service can not be created through the Service class in CLR?
If so, I might need then to skip the activated stored procedure in favor or a CLR service, alltogether?
Any help - greatly appreciated.
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
I am trying to send a message between to SQL Server 2005 instances on two different machines. I have checked all my routes and all my objects appear to be setup correctly. However, when running Profiler on the target machine, I receive the "This message has been dropped because the TO service could not be found. Service name: "[tcp://mydomain.com/TARGET/MyService]". Message origin: "Transport". This is my activated stored procedure that is sending the message to the target service. I am using certificate security. Any help appreciated....
CREATE PROCEDURE [usp_ProcessMessage]
AS
BEGIN
SET NOCOUNT ON;
DECLARE @conversation_handle uniqueidentifier
DECLARE @message_body AS VARBINARY(MAX)
WHILE (1=1)
BEGIN
BEGIN TRANSACTION;
WAITFOR(RECEIVE TOP (1)
@conversation_handle = conversation_handle,
@message_body = message_body
FROM [tcp://mydomain.com/INITIATE/MyQueue]
), TIMEOUT 1000;
IF (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
END CONVERSATION @conversation_handle
IF @message_body IS NOT NULL
BEGIN
BEGIN DIALOG CONVERSATION @conversation_handle
FROM SERVICE [tcp://mydomain.com/INITIATE/MyService]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
ON CONTRACT [tcp://mydomain.com/INITIATE/MyMessage/v1.0]
WITH ENCRYPTION = ON, LIFETIME = 600;
SEND ON CONVERSATION @conversation_handle
MESSAGE TYPE [tcp://mydomain.com/TARGET/VisitMessage]
(@message_body);
END
COMMIT;
END
END
GO
My endpoints are created like so:
CREATE ENDPOINT MyEndpoint
STATE = STARTED
AS TCP
(
LISTENER_PORT = 4022
)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE MasterCertificate)
GO
GRANT CONNECT TO CertOwner
GRANT CONNECT ON ENDPOINT::MyEndpoint TO CertOwner
GO
And my routes like so:
GRANT SEND ON SERVICE::[tcp://mydomain.com/INITIATE/MyService] TO CertOwner
GO
CREATE REMOTE SERVICE BINDING [MyCertificateBinding]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
WITH USER = CertOwner,
ANONYMOUS=OFF
CREATE ROUTE [tcp://mydomain.com/INITIATE/MyRoute]
WITH SERVICE_NAME = '[tcp://mydomain.com/TARGET/MyService]',
BROKER_INSTANCE = N'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx',
ADDRESS = N'TCP://xxx.xx.xx.xx:4022'
GO
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
<serverIP>:<portNumber><InstanceID>
<serverIP><InstanceID>:<portNumber>
<serverIP><InstanceID> <portNumber>
None of them worked.
Any suggestions?
Thanks.
All,
I am looking at implementing some sort of throttling whereby "expensive" reports are setup as Subscriptions (and hence are run by the Windows Service), while all other requests go the Web Service.
My question is:
Do the two systems share any underlying systems? I understand (of course) that they use the same DB, etc. etc. However, I can't quite tell whether there is an underlying engine that is a common base or if they really just spin up different instances of the same objects and essentially each host the application separately?
Any help is greatly appreciated!
Mark
I am currently hardening our SQL 2012 (with AlwaysOn Availability Groups) environment. Both the SQL service and agent account are using service accounts (only domain user). SQL browser service is disabled. Permissions to all roles are handled by using domain groups.
Currently a lot of (default) NT Service accounts are listed (some with sysadmin privileges). Are there accounts that can be removed?
Hi all,
I do understand that it is highly recomended to have aserprate user (perfered a domain user account) for each of the SQL Server service and SQL Agent service.
What is the reason behind that? (Someone told me to not run the service with an account that has a powerul privilegs! - I don't undrstanmd this point can you explain it please?)
What is the diffrent between: 1- Local System account 2 -Network Service account
Thanks in advanced!
CS4Ever
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
Hi,
I am trying to install MS Sql Server 2000 on my machine. The OS on my machine is Windows XP SP2. During the installation i keep getting an error message, "Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information." I have copied an extract from the sqlstp.log file below:
10:05:28 Process Exit Code: (-1)
10:05:31 Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information.
10:05:31 Action CleanUpInstall:
10:05:31 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service SQLSERVERAGENT
10:05:31 Process Exit Code: (1060) The specified service does not exist as an installed service.
10:05:31 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service MSSQLSERVER
10:05:31 Process Exit Code: (0)
10:05:31 StatsGenerate returned: 2
10:05:31 StatsGenerate (0x0,0x1,0xf000000,0x200,1033,303,0x0,0x1,0,0,0
10:05:31 StatsGenerate -1,531793)
10:05:31 Installation Failed.
Can someone please help me solve this problem?
Cheers...
With the new improvments to the web service task, we can now use variables as arguments in web service calls. I am trying to setup a call to the amazon web service ECS. I am trying to do a simple sellerlookup. I have played with the settings and gotten nowhere. I get one of two error when I try to execute. I can always use a scripting task or write my own task, but I would like to use the built in task if it is possible. Has anyone used AWS with SSIS?
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Object reference not set to an instance of an object.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
or
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.AWSECommerceService.SellerLookup' not found.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Microsoft recommends that you do not use the Network Service account to run the SQL Server service (see http://msdn2.microsoft.com/en-us/library/ms143504.aspx).
Can anyone tell me what the drawbacks are of doing this?
Okay now this is weird, today the Reporting Services was not running and here are the entries in the event log:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 12/12/2007
Time: 9:47:22
User: N/A
Computer: TFS
Description:
The ReportServer service was unable to log on as DOMAINTFSREPORTS with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: ReportServer
Domain and account: DOMAINTFSREPORTS
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
I am the administrator of the machines and I can assure you that no domain policy has changed for a couple of weeks. What should I look for?
I am doing some research to see if the Service Broker technology would help my company with our Enterprise application. Here is our scenario: We have a 3 tier system. The first tier needs to contact the second tier asynchronously. Hence, using queues is a good option. However, the process that needs to happen on the second tier is mostly process intensive with little database updates. Is it still worth our time to use Service Broker?
I like the concept of Activation that Service Broker provides. But, from what I am reading most of the documentation describes activation as a way to call another stored proc. I definitely dont' want to do any process intensive work on the SQL server. So here comes my question...
How would I use a windows service to listen to the activation event from the Service Broker. I could have multiple windows services watching the same queue (scalable). Would I have to handle collisions myself? If so, I think I would rather keep it simple, and just use a simple table as my queue.
Thanks for your comments in advance...
Vijay.
How to prevent the hang on the initator service broker if the target service broker is not started?
Our case has two service brokers (two databases), sometime, the target is need to turn off. But the sitation is the initator service broker (in fact, the message is sent from triggers) become hang, I want to prevent this case and continue to operation, and the messages should queue and will continue to send to target service broker when it startup. How should I do?
i have a list report
some values of this are blank or null
i want to avoid that spacing if it is null
like
name:jjj
lastname kkk
firstname
address uuuu
i want it should be
name jjj
lastname kkk
address uuuu
Hi,
I am using SQL Server 2005 Reporting Services. I want to make it secure. I am also using WCF services and made them secure using Claim based System.Identity Model.
I want to apply same claim based model to Reporting Services.
How can I do that?
Amit
Hello, I receive this error "The SQL Server Service Broker for the current database is not enabled, and as a result query notifications are not supported. Please enable the Service Broker for this database if you wish to use notifications." I attach the database in Management Studio to query and enable the broker using the scrip below but to no avail. ALTER DATABASE DataName SET ENABLE_BROKER ‘''<<------successfulandSELECT is_broker_enabled FROM sys.databases WHERE name = 'Database name' ‘'''<<-------value is 1 Global.asax ... Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs) System.Data.SqlClient.SqlDependency.Start(ConfigurationManager.ConnectionStrings("dataConnectionString1").ConnectionString) End Sub...Web.config ... <connectionStrings> <add name="dataConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|jbp_data.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> <add name="ASPNETDBConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings>... Hope you could help. cheers,imperialx
View 1 Replies View Relatedyestarday there is an article released about the service pack for the service pack 2 for sqlserver wo downloaded before mar 5 , 2007.
but to my development server i didn't download sp2 yet. Ifs it safe to download the sp2 for sqlserver 2005 enterprise edition now??
thanks,
Original suggestion for my problem was - Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000. What am I missing?
using SQL 2000 server
SELECT LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE (LinksInfo.L_ID IN (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip
Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.
Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated