I am working on Sharepoint 2007 . I had set the SessionState in Sharepoint settings Central Administration for timeout as 360 min . And in the web.config of Sharepoint site, i had set Enable SessionState to true and <sessionState mode="InProc" timeout="60" /> also done. Still the session gets timed out within 5 minutes ? Can anyone help in this ?
View 3 RepliesSharepoint Server Portal 2007, MSSQL 2005, Reporting Services
When I try to integrate Reporting Services in Adminitsrator, for url of RS I write this: http://servername/ReportServer/ and click OK.
But when I try to go to 'Set Server defaults' or 'Managed Shared Shedules' I get this:
Server was unable to process request. ---> Client found response content type of '', but expected 'text/xml'. The request failed with an empty responseWhat should I Do ?
I know this is not SQL server related. Do anyone know good Third-party tools to backup sharepoint 2007? I have looked at www.avepoint.com and ideras tools but didn't find price listings. I am looking which has reasonable price and efficient.
Only xpurt ownly
Hi,
I'm having troubles connecting the webparts on SharePoint 2007. I installed the RSWebParts package from SQL Server 2005 Reporting Services on my MOSS 2007 box. The installation went smoothly and I can add both Report Explorer and Report Viewer on a page. But when I try to connect RE to RV I get the following error:
An unexpected error has occurred.
Web Parts Maintenance Page: If you have permission, you can use this page to temporarily close Web Parts or remove personal settings. For more information, contact your site administrator.
So I have to go to the maintenance page and remove the web parts.
Have anyone managed to bypass this and make them work together?
Thanks,
I am trying to work through a test on database mirroring I am following the whitepaper that Micrososft published on how to configure mirroring and sahrepoint, but when i failover the config database and admin content database it doesnt appear to work. I execute the following commands after both are failed over
----
stsadm.exe -o renameserver -oldservername <OldPrincipalServer> -newservername <NewPrincipalServer>
iisreset
----
It doesnt work it get the following error.
Unable to connect to database. Check database connection information and make sure the database server is running.
When i bring the admin content databse back to the original principle the admin site works great.
What am I missing?
Hi,
I am creating my application using sharepoint 2007.
Reports created for showing in sharepoint sites are also deployed in sharepoint document library.
Now i am able to view the report using reportviewer control in sharepoint.
Now i need to deploy a report in reportserver database and i need to use RSwebservice to get the report and to show in sharepoint.
Can any one give me idea to solve this problem.
thanks
I have several SharePoint 2007 SQL 2005 databases that are replicating fine.
However, I have the WSS_Content _db that errors every time as shown below.
This only happens on the table shown, not on any of the other tables.
I am looking for confimation that this is a glitch withing SQL 2005 and there is nothing I can do about it pending a service release.
Anyone else run into this?
Error messages:
Source: Microsoft.SqlServer.Smo
Target Site: System.Collections.Specialized.StringCollection ScriptWithList(Microsoft.SqlServer.Management.Smo.DependencyCollection, Microsoft.SqlServer.Management.Smo.SqlSmoObject[])
Message: Script failed for Table 'dbo.NameValuePair_Hindi_CI_AS'.
Stack: at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(SqlSmoObject[] objects)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, Table smoTable)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: Microsoft.SqlServer.Smo, Error number: 0)
Hi,
I have an issue with my report when deploy to sharepoint 2007. Basically my report have 3 parameters, start date date picker, end date date picker and event dropdown. The data displayed in the event dropdown will depends on the start date and end date specified by user.
The problem is the event dropdown some how get "cached". I have to manually click on apply in sharepoint report veiwer for the event list to be updated. This doesn't happend in Visual Studio and also report server but only happend when I deloyed to sharepoint thus I suspect it's the sharepoint issue.
Anyone encounter similar problem before?
Hi, iam from Mexico,
somebody has installed SQL 2005 with mirroring and sharepoint 2007?
regards.
thanks
I'm trying to install SharePoint 2007 and Reporting Services 2005 on the same server. However after installation Reporting Services will not load at http://localhost/Reports. Instead I get the following error:
Server Error in '/Reports' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Cannot use 'partitionResolver' unless the mode is 'StateServer' or 'SQLServer'.
Source Error:
Line 164: </webParts>
Line 165: <machineKey validationKey="DA65D9E6980E9CDB52426BF3C793EBAF7FBA3B866117F3CC" decryptionKey="9D7E984E12AA43FDECAB1E05D1E952822680D27BD1F37439" validation="SHA1" />
Line 166: <sessionState mode="SQLServer" timeout="60" allowCustomSqlDatabase="true" partitionResolverType="Microsoft.Office.Server.Administration.SqlSessionStateResolver, Microsoft.Office.Server, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
Line 167: </system.web>
Line 168: <runtime>
Source File: C:InetpubwwwrootwssVirtualDirectoriesc76013d9-5b44-4d06-96dd-24fede1ea955web.config Line: 166
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I assume that something is wrong with my virtual server set up. I have the Default Web Site stopped and SharePoint (80) running and set Reports and ReportServer using the Report Configuration to SharePoint (80).
I can get to http://localhost/ReportServer but I get this error when running a report from there:
Reporting Services Error
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
The type Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c does not implement IReportViewerMessages or could not be found
Has anyone set these up on the same server? Is there a document around on how to set this up?
Thanks
Kevin
Hi all,
We got this message on our production server event viewer for source MSDTC.
"String message: Session idle timeout over,tearing down the session"..
Even though it is marked as informational, just wanted to know what it is?..
thanks guys,
Marx
Has anyone ever heard of a Data Driven Database using Frontpage 2003 or Sharepoint 2007 as the assistant tool on for the front end and SQL server as the engine?? Is that even possible??
Cause right now I have Access 2003 on the Front end and I would like to get rid of it
Hi,
I am working on sharepoint 2007 integration with reporting service 2005. There are few facts which i am trying to understand and need some clarifications. Please provide your comments
1) While configuring "Database setup" in Repoting Service Configuring Manager" i found two modes 1) Native and 2) SharePoint Integration. When creating a report server database if we check "Create the report server database in Sharepoint Integration Mode" then it set the mode to "SharePoint Integration Mode". There is no option of switching the same database to native mode. So i have to create another database in "Native Mode". (IS THIS CORRECT. DO WE NEED TO CREATE TWO REPORT SERVER DATABASE SEPERATE FOR SHAREPOINT INTEGRATION AND NATIVE)
2) I am using the new report viewer web part in sharepoint 2007. When i am in sharepoint integration mode i can create datasource, report model and with report builder i can create rdl file. On selecing any RDL file in doument library and it gets displayed in Report Viewer Web Part. When i switch to Native mode i want to configure the web part to use the report created with SQL Server Bussiness Intelligence Dev Studio and deployed on http://localhost:808/ReportServer. (IS THERE ANY WAY SO THAT I CAN EXPORT AND IMPORT ALL .RDL FILE FROM http://localhost:808/ReportServer to http://localhost/ReportServer)
I AM NOT ABLE TO CONFIGURE WEB PART WHEN I AM IN NATIVE MODE i.e giving path of .RDL in report textbox throw a error saying "Item not found" i tried all combination. THIS can be related to datasource not reading in .RDL file in native mode while confuring report viewer web part.
http://localhost:808/ReportServer (Report Server)
http://localhost/ReportServer (SharePoint Mode) (Default Top Level Site)
3) LAST : I want to create a .RDL file report from the data in sharepoint, say lists or news etc. So when creating a RDL file how can i connect to sharepoint database. I read some where that in previous release they used to DATA EXTENSIONS and get the data from list in sharepoint with something like http://<servername>/<sitename>/List=Announcement when creating RDL file. Is the alternative in new release to create the report based on sharpoint list data.
Thanks and i would really appreciate your help
I have the following setup:
Windows 2003, Sahrepoint 2007, Report Services Addin (v9.00.3033) on one machine
Windows 2003, SQL Server 2005 SP2 CTP (v9.00.3033) on another.
When I install the Report Service addin on the Sharepoint machine, the install goes fine; however, when I go to the Application Management screen in Sharepoint Central Admin I don't see a "Reporting Services" section or a "Manage integration settings" link.
Any thoguths?
Thanks,
Atul
Hi!
I'm configuring now Reporting Services on SQL Server 2005 in Office Sharepoint Server 2007 integration mode. In the beginning of the process, I had already installed SQL Server 2005 with RS and Office SPS 2007. I used following guides to make further steps:
How to Configure Reporting Services to Use a Non-Default Web Site (Reporting Services Configuration)
How to Configure Service Accounts (Reporting Services Configuration)
How to Configure SharePoint Integration on a Standalone Server
How to Configure the Report Server Integration Feature in SharePoint Central Administration
Troubleshooting a Side-by-Side Installation of Reporting Services and Windows SharePoint Services
So I installed RS add-in for SPS, made RS configuration and almost all SPS configuration. I stopped with error
"An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The request failed with HTTP status 404: Not Found. " in "Set server defaults" command.
My servers configuration is following:
1. Both RS and SPS are running on the same server.
2. I cannot change port of default web site, so I made different web site "Reporting services" under same web server with port 8086 (http://mtx-sps2007:8086/reportserver)
3. RS Windows service runs under domain system account that is a member of local Administrators group (account name sql2k5sps7)
4. RS Web service runs under NT AuthorityNetworkService account
5. Database connection configured using mentioned above account sql2k5sps7
6. Report Server Web Service URL in SPS is set to http://mtx-sps2007:8086/reportserver
7. Authentication Mode in SPS is set to "Trusted account"
8. My account, under which I make a connections through terminal services to SPS and RS servers and through http to reportingservices page is a member of local administrators group of both my PC and server.
9. I'm not familiar with SPS (honestly speaking, with RS too, but at least I learning this quickly, but SPS is out of my responsibilities scope)
10. ReportServer runs under separated app pool that runs under NT AuthorityNetworkService account
And now I'm fighting with this error on "Set server defaults" command. It's interesting that from my PC there is no credentials prompt when entering SPS administrations page and error is following:
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode
But from terminal client, connected to SPS and RS server, there is a credentials prompt (I enter my credentials) and error is as mentioned abowe:
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The request failed with HTTP status 404: Not Found.
Also, the same error I got when I tried to add a report to report viewer web part on SPS test page.
Can anyone help me with this? I would be greately appreciated to any help on resolving this issue.
Hello Everyone,
I have been banging my head against the wall with trying to integrate SharePoint 2007 and SQL Reporting Services. I have been following these 2 websites down to the letter in trying to configure everything:
1. http://msdn2.microsoft.com/en-us/library/bb326356.aspx <---Microsoft's Steps
2. http://blogs.msdn.com/sharepoint/archive/2007/02/19/microsoft-sql-server-2005-sp2-reporting-services-integration-with- wss-3-0-and-moss-2007.aspx <---SharePoint Blog Group
Basically my setup is as follows:
Server 1 = SharePoint 2007
Server 2 = SQL Server Reporting Services SP2 / SharePoint 2007 services
Server 3 = Database
Server1 is setup and running SharePoint 2007 fine with no problems. It was installed under the complete option with its own server farm. Then with the Server2, SharePoint 2007 is installed again, also under the complete complete option, and configured to join Server1's server farm. In this way, Server2 is able to supply Server1 with services and it has been said that if you are using 2 different servers, one for SharePoint and one for Reporting Services, you need to have an instance of SharePoint on the reporting services box. With a SharePoint "front-end" the reporting-services now has a way to also join Server1s farm.
This is where the headache begins....the SharePoint install is successful on Server2 and the services are started as evident through the Central Administration page. The next task is to install SQL Server 2005 Reporting Services and then the SQL Server 2005 SP2 patch.
After installing SQL Server and the SP2 patch, you go into the SQL Reporting Services Configuration Manager and setup the Report Server, Database, and SharePoint integration. I configure everything to run under the "DefaultAppPool" under IIS, and I get green accepted checkboxes on everything.
Finally, the last step is to install Microsoft SQL Server 2005 Reporting Services Add-in for Microsoft SharePoint Technologies on Server1. This add-in actually allows the connection between SharePoint on Server1 to the Reporting Services on Server2. The install is successful and the extra options for reporting pop up under Central Administration page. When configuring the final connection under the Central Admin I referred to the following Microsoft Page:
http://msdn2.microsoft.com/en-us/library/bb326213.aspx
For the "manage integration settings", I set the report server to Server2 and use Windows Authentication. Then for the "grant database access" I use Server2 and login with my credentials...
PROBLEM: Then for the final step of setting the server defaults, I click on the link and get the following error:
"An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. "
I have googled and tried installing/uninstalling several times, but it seems that I keep getting hung up here. When trying to access reports on the ReportServer, the same error message comes up.
If anyone is familiar with integration between SharePoint and SQL Reporting Services, and may have any ideas/comments/advice, I would greatly appreciate it. Thanks in advance! =)
--A4orce84
Hi,
I tried to install sharepoint server 2007 as a standalone in my computer. When i run the sharepoint products and technologies configuration wizard, i get the following error,
Failed to create sample data.
An exception of type System.Data.Sqlclient.SqlException was thrown. Additional Exception information:
Cannot open database "SharedServices2_DB_28aa01d8************************" requested by the login. The login failed.
Login failed for user "domainAdministrator"
Please advice me to solve this issue.
Thanks,
Magesh S
How can I configure SQL Server 2000 to close the connections that has been inactive/sleeping for more than "X" minutes?
View 6 Replies View RelatedI've been running around in circles all afternoon trying to create one simple report using Reporting Services (with latest SP2 installed) and SharePoint 2007. To the best of my knowledge, I have everything configured correctly:
When I access http://<server>/ReportServer, I see the server name of my SharePoint site.
When I click on the name of my SharePoint site, it shows me the directory structure I have created within my SharePoint Site
When I drill down in the directory, I can ultimately see the forms I created in my forms library (created via InfoPath 2007).
The next step is to create one simple report from the data in one of these forms libraries and a report on all the items within a form library. I'm stuck at the first step of creating a report, namely what to enter as the Data Source and the connection string. With a SQL database this isn't an issue.
How does one create a data source that will allow reporting over SharePoint content with the setup described above? And, if you have information that is found in the SQL Books Online, please be kind and post links so others know where to find this information.
hello good afternoon, I am having this issue, I need to move reporting services from one server to another, but I need that credentials, roles and reports stay the same. But as the reporting services is integrated with sharepoint, dont know if I can move both at the same or it has to be done one at a time. this is just data migration, but still I will like to Know how it can be done having the same structure with the roles and credentials. or it is prefered to do a ghost?? but the issue will be that we have the reporting services in one place and the data in another... don´t know how this will affect. thanks in advanced for the help.
View 1 Replies View RelatedMy site crashed, so I had to rebuild the Project Site.
I used the SharePoint products and technologies configuration wizard to disconnect from the server farm (only actually running on the single server).
I then reran SharePoint products and technologies configuration wizard to setup the site.
Configured the Project Service and attached to the existing dB's.
Previously, I used the url http://servername.domain.forest/PWA/default.aspx .
Now when I attempt the use the same URL, I get the following error:
"An unexpected error has occurred"
I have tested this one 3 servers now and I receive the exact same result. Is there a path I should apply to the servers in order to allow fully qualified server names after a reinstall of the system?
We run std 2008 r2. I've never been able to get to my ssrs server thru ssms as u can see as part of the question atÂ
[URL] ..... but I've found workarounds to this point by knowing how to look at the rs db itself and by having access to the server itself thru rdp with an admin acct.
I'm looking at an error from a user that reminds me of what we used to call session timeouts. They would occur when the user has walked away from his desk long enough for ssrs to delete refs to the report he just ran.
I logged into the server itself hoping to find both exec and session timeout params via the rs config tool but did not see them there. What the config file is called and where i'd likely find it? Or perhaps a query I could use to see what the current values are?
I couldn't find any tutorials/articles on integrating a SharePoint web service call with an SSIS package
I need to schedule a web service to truncate and populate SharePoint Lists (2007 & 2003) from a SQL Server 2005 table.
I guess I'm just ignorant about integrating web services with SSIS. How do I make a call to the web service through my SSIS package? (script task?)
Any links to articles/tutorials or pointers would be apreciated.
Hi,
Does any know how to increase a session timeout for Report Creation uing SQL Server 2005 Reporting Services. Iam trying to export a report (to a .pdf) using SQL 05 reporting services. However, it seems that the the query is timing out coz of session-time out. Can anyone tell me how to increase this value ?
Thanks
Nik
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
Hi all!
I'm VERY new to MOSS2007 and I have couple of questions about it and SQL Server 2005. The basic idea is to receive data from MOSS2007 into SQL Server 2005 in my own database and make some reports from there.
Which are the best practices to receive data from MOSS2007 into SQL Server 2005? Do I have to write some dlls for example with VB.NET (and use Sharepoint API calls) and use those dlls in stored procedures in SQL Server 2005? Or can I just use normal T-SQL (I believe that data in MOSS2007 is saved in lists and lists are saved in DB)?
Waiting for your replies. The more detail your answer is the more grateful I am!
Thanks!
Best Regards,
Harry F.
Hi all (and sorry for crossposting)!
I'm VERY new to MOSS2007 and I have couple of questions about it and SQL Server 2005. The basic idea is to receive data from MOSS2007 into SQL Server 2005 in my own database and make some reports from there.
Which are the best practices to receive data from MOSS2007 into SQL Server 2005? Do I have to write some dlls for example with VB.NET (and use Sharepoint API calls) and use those dlls in stored procedures in SQL Server 2005? Or can I just use normal T-SQL (I believe that data in MOSS2007 is saved in lists and lists are saved in DB)?
Waiting for your replies. The more detail your answer is the more grateful I am!
Thanks!
Best Regards,
Harry F.
Hello,
I have an intranet environment consists of two servers:
- An application server windows 2003 server with 64-bit server Sharepoint 2007 SP1 (Standard version for search)
- A database server windows 2003 server with 64-bit SQL Server 2005 SP2 64-bit (Standard - 9.0.3054)
It happens regularly that the database server crash (frozen black screen) while the application server indexes (crawl) the content of the intranet site based on sharepoint. There is no alert / error in the observer of events, nor in the sql logs.
The crash is uncertain: dice once all goes well, soon after that crash. When i set the parameter search service (service management research), I can define a regulatory impact of the robot to change the number of documents at the same time : "Request 2 documents at the same time, the crash is more rare, "ask 64 documents at a time, the crash is more common.
My Intranet under sharepoint is composed of a collection site with a dozen sub-sites. There are 3 large library of PDF document. All done in the 4 go in terms of volume.
My problem for about 3-4 months. (Maybe more. Before, indexing was not yet in place).
Someone could help me? Thank you
My table as data as follow,
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
DROP TABLE [dbo].[table_Data]
GO
/****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
[code].....
Hi
everybody.
I am new to VBA,.,, I Have created a folder under inbox in Outlook 2007 which stored the receipients information
like name, E-mail, which is not present in the address book of outlook.
I have imported this folder in access 2007. My problem is ... it does not display the email address.
Rest of the informations is displayed... Is there any way i could do this.??
is there any way i could get the email addresses to appear(import/get) in to the access table???
Is there any module i mite have to create??
Plz help...
thanks a million
I get the following error when I try to navigate to a report/model/data source, stored in a Sharepoint Document Library using a Sharepoint URL based on an Extranet or Intranet zone - but it works OK using the url for the Default zone:
System.Web.Services.Protocols.SoapException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SecurityZoneNotSupportedException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used.
Is this a limitation of the SQLRS-WSS3 integration or is there a workaround?
Many thanks to anyone who can help!
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
Does anyone know the location of Microsoft.ReportingServices.SharePoint.UI.WebParts.dll after you install the web part? I am wondering if I can inherit from this web part to wrap some other functionality into it. I know that i see it in the GAC buyt can't seem to find it so I can look at the assembly using reflector.
Also, how easy is it to pass in parameters to the Report Viewer?
Thanks!
Erik