Set Time Up To Minutes

Oct 28, 2014

I am using below query to get the today date and time(2 hrs more than actual time)

select dateadd(HOUR, 2, getdate()) as time_added

the result of above query is "2014-10-28 13:19:09.343" but I want time up hours like shown below

"2014-10-28 13:00"

View 7 Replies


ADVERTISEMENT

SQL Server Very Slow For 10 Minutes At A Time

Oct 27, 1998

We have an application that has about 100 users at a time. Roughly once a day, we experience a complete
slowdown on the server. All users notice it. The network seems fine because I can ping the server. Also,
I can attach to drives on the server quite fast so I don`t think it`s server resources. When I manage to
get in and do an sp_who, certain processes are blocking others. Talking to the users who were blocking,
they were not doing anything out of the ordinary - one was even doing just a select. The error log is full
of 17824 and 1608 errors. Is there some configuration setting that I should change? This is getting serious!

Thank you.

View 1 Replies View Related

T-SQL (SS2K8) :: Calculate Time In Minutes

Oct 8, 2014

I am having below schema:

CREATE TABLE #Attendance(
[ID] [int] IDENTITY(1,1) NOT NULL,
[StudentID] [int] NOT NULL,
[ClassID] [int] NOT NULL,
[DateAdded] [datetime] default getdate() NOT NULL
) ON [PRIMARY]

insert into #Attendance(StudentID,ClassID,DateAdded) values(1,1,'2014-10-07 10:38:02.900')

[Code] ....

DateAdded column in first table is nothing but in and out time.

Now I want to prepare a query where I want to consider MIN DateAdded and max DateAdded and calculate the duration of student present in the class.

Validations i need to consider are:

If class is starting at 10am then student can come at 9:50am, i.e. Dateadded column should consider as student present in that class if value is less that 10 minutes of StartTime from #ClassAttendance table. Class End time i want to calculate depending upon ClassMinutes from #ClassAttendance

Also DateAdded column should be 10 minutes plus compared to calculated endtime. If its more than that consider lower DateAdded time.

And by using this thingIi want to calculate total number of minutes student present in the class and number of minutes absent.

If there is only one DateAdded for class then consider as a absent student.

View 7 Replies View Related

Decimal Time To Hours Minutes

Feb 3, 2014

I have a series of times in decimal 15 min slots. The data type is float and the field is the followng:

10
10.25
10.5
10.75
11
and so on

I would like to convert that to the hour and 15 minute slot

10:00:00
10:15:00
10:30:00
10:45:00
11:00:00

View 4 Replies View Related

Time Interval For Hour And 30 Minutes

Sep 4, 2007

Time Interval for hour and 30 minutes
--------------------------------------------------------------------------------

Hi Everyone

I Have column in sql server databas as "HHMMSS" and data as and i am doing a substring to get values for hours and minutes. since my calculations based on hour interval and 30 minutes interval


for ex: Now i want to show all the transaction done b/w 6 to 7 am or pn.

and for 30 minutes interval i have get the calculation as transactions done b/w 6:00 to 6:30 and 6:30 to 7:00 either it's am or pm. now how i can write my sql statements that calculates hour and 30 minutes intervals
HHMM
-------------
06:43
09:26
09:26
11:58
12:25
18:17
20:45
00:43
00:53
16:47


Thanks
Phani

View 7 Replies View Related

Transact SQL :: Getting Time Difference In Hours And Minutes?

Jul 10, 2015

Currently my script is using the below mentioned query to find the time difference.

DATEDIFF(HH,DATEADD(SS,hcreacion,fcreacion) ,DATEADD(SS,hcerrar,fcreacion))

If there is 1 hr 30 minutes time difference, I am getting 2 hours as output. But we need 1.30 as output. is there any way to achieve this?

View 14 Replies View Related

Returning Time Difference As Days/ Hours/ Minutes

Sep 16, 2005

I have written a function that returns the number of Days, Hours and minutes from a given number of minutes. On testinf the results are close but not quite there. Can anyone see where I have gone wrong or is there an easier way of doing this? Code is as follows:

CREATE FUNCTION dbo.GetTimeBetweenLong
(@StartTime DateTime, @EndTime DateTime, @CurrentDate DateTime)
RETURNS VarChar(50) AS
BEGIN
DECLARE @TotalTime Numeric
DECLARE @Minutes Numeric
DECLARE @Hours Numeric
DECLARE @Days Numeric
DECLARE @MinutesInDays Numeric

IF @EndTime IS NULL
BEGIN
SET @Days = DATEDIFF(Day, @StartTime, @CurrentDate)
SET @Hours = DATEDIFF(Hour, @StartTime, @CurrentDate) - (@Days * 24)
SET @Minutes = DATEDIFF(Minute, @StartTime, @CurrentDate) - ((@Days * 24)*60) - (@Hours * 60)
END
ELSE
BEGIN
SET @Days = DATEDIFF(Day, @StartTime, @EndTime)
SET @Hours = DATEDIFF(Hour, @StartTime, @EndTime) - (@Days * 24)
SET @Minutes = DATEDIFF(Minute, @StartTime, @EndTime) - ((@Days * 24)*60) - (@Hours * 60)
END

IF(@Days <0)
BEGIN
SET @Days = @Days - @Days - @Days
END

IF (@Hours < 0)
BEGIN
SET @Hours = @Hours - @Hours - @Hours
END

IF (@Minutes <0)
BEGIN
SET @Minutes = @Minutes - @Minutes - @Minutes
END

RETURN CONVERT(nVarChar(10),@Days) + ' Days, ' + CONVERT(nVarChar(5), @Hours) + ' Hours, ' + CONVERT(nVarCHar(5), @Minutes) + ' Mins'

END

View 1 Replies View Related

SQL Server 2012 :: Add 15 Minutes To A Time In Char Format

Mar 10, 2015

I am looking to be able to add 15 minutes to a time value that is in character format. here is sample data:

0530
0545
0600
0615
0630
0645
0700
0715
0730
0745

Whenever there is a leading zero, I need to preserve that as well. Here is an example of what I an looking for:

0545 + 15 = 0600
0600 + 15 = 0615
1345 + 15 = 1400

View 9 Replies View Related

Transact SQL :: Convert Time In Hours And Minutes To Decimal

Jul 30, 2008

I am trying to convert hours and minutes to decimal and arrive at a sum of time taken. The column TotalTimeSpent is the diff in hours/mins between the Started and Ended times.

SELECT DATENAME(weekday, Started) AS Day,        C.Category,     ClientCode,Description,    dbo.FormatDateTime(Started, 'HH:MMS 12') as Started,    dbo.FormatDateTime(Ended, 'HH:MMS 12') as Ended, CONVERT(varchar,TimeTaken,108) AS TotalTimeSpentFROM dbo.Journal JLEFT OUTER JOIN dbo.Categories C ON J.CategoryID = C.CategoryIDWHERE--DATENAME(weekday, Started) =@Weekday  AND Started >= @StartDate ORDER BY Day, Category, Started

View 6 Replies View Related

Query Runs In Sub Second Time Until I Put It In A Stored Procedure Then It Takes 2 Minutes.

Jun 25, 2007

The query below runs in sub second time if I don't call it as a stored procedure. I have looked at the execution plan for both the query and the query as a stored procedure and they are the same.
When I put the query into a stored procedure it takes over 2 minutes to run.
All feedback (even the ugly stuff) is more than welcome. I want to master this issue and forever put it behind me.
This is the sql when I just execute it outright:1 DECLARE
2 @WebUserID nvarchar(20)
3 ,@DocumentTypeID int
4 ,@RouteID nvarchar(10)
5 ,@CustomerID nvarchar(15)
6 ,@DocumentIDPrefix nvarchar(20)
7 ,@StartDate datetime
8 ,@EndDate datetime
9 ,@OversoldOnly bit
10 ,@DexCustomersOnly bit
11 ,@DeviationsOnly bit
12 ,@CashNoPaymentOnly bit
13 ,@SignatureName nvarchar(45)
14 ,@SortExpression varchar(200)
15 ,@StartRowIndex int
16 ,@MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 WITH OrderedDocumentHistory AS
32 (
33 SELECT
34 dh.DocumentHistoryID
35 ,dh.DocumentID
36 ,dh.DocumentTypeID
37 ,dh.DocumentTypeDesc
38 ,dh.RouteID
39 ,dh.RouteDesc
40 ,dh.CustomerID
41 ,dh.CustomerName
42 ,dh.DocDate
43 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
44 ,ddt.Description AS 'SignatureReason'
45 ,a.Amount
46 ,ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC) AS 'RowNumber'
47 FROM
48 DocumentHistory dh
49 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
50 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
51 INNER JOIN
52 (
53 SELECT
54 DocumentHistoryID
55 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
56 FROM
57 DocumentHistoryItems dhia
58 GROUP BY
59 dhia.DocumentHistoryID
60 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
61 LEFT OUTER JOIN
62 (
63 SELECT DISTINCT
64 dca.DocumentID
65 ,1 AS 'HasReceipt'
66 FROM
67 DocumentCollections dca
68 ) AS dc ON dh.DocumentID = dc.DocumentID
69 WHERE
70 dh.DocDate BETWEEN @StartDate AND @EndDate
71 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
72 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
73 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
74 AND dh.DocumentID LIKE @DocumentIDPrefix
75 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
76 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
77 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
78 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
79 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
80 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
81 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
82 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
83 OR @WebUserID IS NULL)
84 )
85
86 SELECT
87 DocumentHistoryID
88 ,DocumentID
89 ,DocumentTypeDesc
90 ,RouteID
91 ,RouteDesc
92 ,CustomerID
93 ,CustomerName
94 ,DocDate
95 ,Amount
96 ,HasReceipt
97 ,SignatureReason
98 FROM
99 OrderedDocumentHistory
100 WHERE
101 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows) Here is the sql for creating the stored procedure.  1 CREATE Procedure w_DocumentHistory_Select
2 (
3 @WebUserID nvarchar(20)
4 ,@DocumentTypeID int
5 ,@RouteID nvarchar(10)
6 ,@CustomerID nvarchar(15)
7 ,@DocumentIDPrefix nvarchar(20)
8 ,@StartDate datetime
9 ,@EndDate datetime
10 ,@OversoldOnly bit
11 ,@DexCustomersOnly bit
12 ,@DeviationsOnly bit
13 ,@CashNoPaymentOnly bit
14 ,@SignatureName nvarchar(45)
15 ,@SortExpression varchar(200)
16 ,@StartRowIndex int
17 ,@MaximumRows int
18 )
19 AS
20 SET NOCOUNT ON
21
22 IF LEN(@SortExpression) = 0 OR @SortExpression IS NULL
23 SET @SortExpression = 'Number DESC'
24
25 IF @StartRowIndex IS NULL
26 SET @StartRowIndex = 0
27
28 IF @MaximumRows IS NULL
29 SELECT
30 @MaximumRows = COUNT(dh.DocumentHistoryID)
31 FROM
32 DocumentHistory dh;
33
34 WITH OrderedDocumentHistory AS
35 (
36 SELECT
37 dh.DocumentHistoryID
38 ,dh.DocumentID
39 ,dh.DocumentTypeID
40 ,dh.DocumentTypeDesc
41 ,dh.RouteID
42 ,dh.RouteDesc
43 ,dh.CustomerID
44 ,dh.CustomerName
45 ,dh.DocDate
46 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
47 ,ddt.Description AS 'SignatureReason'
48 ,a.Amount
49 ,CASE
50 WHEN @SortExpression = 'Number DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID DESC))
51 WHEN @SortExpression = 'Number ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID ASC))
52 WHEN @SortExpression = 'CustomerName DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName DESC))
53 WHEN @SortExpression = 'CustomerName ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName ASC))
54 WHEN @SortExpression = 'CompletedDate DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC))
55 WHEN @SortExpression = 'CompletedDate ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate ASC))
56 WHEN @SortExpression = 'RouteDescription DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc DESC))
57 WHEN @SortExpression = 'RouteDescription ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc ASC))
58 END AS 'RowNumber'
59 FROM
60 DocumentHistory dh
61 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
62 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
63 INNER JOIN
64 (
65 SELECT
66 DocumentHistoryID
67 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
68 FROM
69 DocumentHistoryItems dhia
70 GROUP BY
71 dhia.DocumentHistoryID
72 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
73 LEFT OUTER JOIN
74 (
75 SELECT DISTINCT
76 dca.DocumentID
77 ,1 AS 'HasReceipt'
78 FROM
79 DocumentCollections dca
80 ) AS dc ON dh.DocumentID = dc.DocumentID
81 WHERE
82 dh.DocDate BETWEEN @StartDate AND @EndDate
83 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
84 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
85 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
86 AND dh.DocumentID LIKE @DocumentIDPrefix
87 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
88 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
89 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL((SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
90 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
91 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
92 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
93 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
94 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
95 OR @WebUserID IS NULL)
96 )
97 SELECT
98 DocumentHistoryID
99 ,DocumentID
100 ,DocumentTypeDesc
101 ,RouteID
102 ,RouteDesc
103 ,CustomerID
104 ,CustomerName
105 ,DocDate
106 ,Amount
107 ,HasReceipt
108 ,SignatureReason
109 FROM
110 OrderedDocumentHistory
111 WHERE
112 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows)
 

 Here is the code for calling the stored procedure:1 DECLARE @RC int
2 DECLARE @WebUserID nvarchar(20)
3 DECLARE @DocumentTypeID int
4 DECLARE @RouteID nvarchar(10)
5 DECLARE @CustomerID nvarchar(15)
6 DECLARE @DocumentIDPrefix nvarchar(20)
7 DECLARE @StartDate datetime
8 DECLARE @EndDate datetime
9 DECLARE @OversoldOnly bit
10 DECLARE @DexCustomersOnly bit
11 DECLARE @DeviationsOnly bit
12 DECLARE @CashNoPaymentOnly bit
13 DECLARE @SignatureName nvarchar(45)
14 DECLARE @SortExpression varchar(200)
15 DECLARE @StartRowIndex int
16 DECLARE @MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 EXECUTE @RC = [Odom].[dbo].[w_DocumentHistory_Select]
32 @WebUserID
33 ,@DocumentTypeID
34 ,@RouteID
35 ,@CustomerID
36 ,@DocumentIDPrefix
37 ,@StartDate
38 ,@EndDate
39 ,@OversoldOnly
40 ,@DexCustomersOnly
41 ,@DeviationsOnly
42 ,@CashNoPaymentOnly
43 ,@SignatureName
44 ,@SortExpression
45 ,@StartRowIndex
46 ,@MaximumRows
 

View 3 Replies View Related

Data Access :: How To Reduce Record On The Basis Of Time If Minimum 2 Minutes Duration In Server

Sep 8, 2015

I have a table with following data

(Id, date ,time)

11 2015/8/1
12:20:00

11
2015/8/1 12:21:00

11 2015/8/1
18:05:20

12 2015/8/1
11:20:00

12 2015/8/1
11:21:00

12 2015/8/1
18:10:20

I need the table with following record only

(Id, date ,time)

11 2015/8/1
12:20:00

11 2015/8/1
18:05:20

12 2015/8/1
11:20:00

12 2015/8/1
18:10:20

View 7 Replies View Related

T-SQL (SS2K8) :: Display Row As 2 Days Ago / 1 Hours 34 Minutes Ago / 11 Minutes Ago

Apr 21, 2015

My table as data as follow,

IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
DROP TABLE [dbo].[table_Data]
GO
/****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))

[code].....

View 6 Replies View Related

How To Convert UTC Time (retrieved From SQL) To Local Time In Reporting Services Based On Time Zone

Aug 7, 2007



Hi all,

I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.

I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.

For example if the date is August 07, 2007 10:00 AM UTC,

then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.


Similarly for other Time Zones it should display the time accordingly.

Is this possible in SSRS 2005?

Any pointers will be usefull...

Thanks in advance
sudheer racha.

View 5 Replies View Related

How To Re-set A Job To Run 10 Minutes Later

Aug 12, 2005

Hi,

I have a job where the first step starts and checks for a condition. If its not true, I want it to reset itself and start again in 10 minutes. I'm using sp_stop_job and sp_update_jobschedule and, initially, it looks like it works. But since it's a Daily job, the 'Next Run Date' increments to the following day. Even though I'm using sp_update_jobschedule to keep the active_start_date as the same day, it still increments. I've tried updating sysjobschedules directly, but get the same results.

Any thoughts much appreciated! Here's my code:
USE msdb


--This is the part that goes in the job step
--and increments the next_run_time if the condition is true.

If
(Select count('x') from mytable (NoLock)
Where PublicationDate > getdate()) < 1
BEGIN
Declare @ActiveStartDate int
Declare @ActiveStartTime int

Select @ActiveStartDate = active_start_date from msdb.dbo.sysjobschedules (NoLock)
Where schedule_id = 61
Select @ActiveStartTime = active_start_time from msdb.dbo.sysjobschedules (NoLock)
Where schedule_id = 61

EXEC msdb.dbo.sp_stop_job @job_name = 'Owners'
Select @ActiveStartTime = @ActiveStartTime + 1000

EXEC sp_update_jobschedule @job_id = '46C074D4-908D-46AE-8B0C-A23E3AD4A4F6',
@name = 'Daily',
@active_start_date = @ActiveStartDate,
@active_start_time = @ActiveStartTime
End

View 3 Replies View Related

Min/max Of X Minutes

Mar 27, 2006

I am trying to develop a sql statement that will create a recordset of the min (or max) values in x minute increments over a period of time.

e.g. over a period of 7 days, I have data that was collected in 1 minute intervals. I need to know the min (or max) value in each 10 minute interval over that same period of time.

Is there an efficient way of doing this?

View 3 Replies View Related

Group On Minutes

Mar 4, 2002

Hi,
I need to write a query whioch give me count on
0-15 minutes and then from 0-720 minutes.
I don't know how to group it.
Any help appreciated.
TIA

View 1 Replies View Related

Datetime To Minutes?

Aug 3, 2004

hey all, i need to find the ratio of difference in 2 datetime variables and the difference of another 2 datetime vars. I figured the best way to do it is to convert the difference in both numerator and denominator to number of minutes.

can anyone help ??

View 1 Replies View Related

CURRENT_TIMESTAMP - 5 Minutes

Sep 25, 2006

:shocked: hi,

I want to use CURRENT_TIMESTAMP - 5 minutes in a select and where clause.

I have tried using

CURRENT_TIMESTAMP - 0.004 AS [Time_-6]

But this is not a round off to a whole minute

Also tried

CURRENT_TIMESTAMP, dateadd(minute, datediff(minute, 0, CURRENT_TIMESTAMP) / 5 * 5, 0)

But this will not do wholes seconds e.g

CURRENT_TIMESTAMP = 10.03.33

CURRENT_TIMESTAMP, dateadd(minute, datediff(minute, 0, CURRENT_TIMESTAMP) / 5 * 5, 0) = 10.00.00

Can anyone help??

View 2 Replies View Related

MS SQL Performance From 10 To 3 Minutes

Sep 27, 2006

Hello all !

I am runing from .NET application an SQL Query
it normally return the rows in 10 seconds
but time to time the application turn 2 or 3 minutes and nearlly crash (or crash)

with exactly the same datas in database

what can be the reasons ?

thank you

View 8 Replies View Related

Got Seconds But Need Minutes

Apr 16, 2004

I have a result that comes out in number of seconds, but need to see it converted to minutes and hours and seconds. Is there a convert function that would do this?

Thanks,
Dan

View 3 Replies View Related

Date - 15 Minutes

May 11, 2008

how can i get my date minus 15 minutes in sql?
is there a dateadd function?

View 2 Replies View Related

Group By Every 15 Minutes?

Sep 20, 2013

I have this script that runs on a LOGGING database and find hourly requests for a particular firm.

The date format is "2013-08-19 13:44:50.177"

How can I group it by every 15 mins?

select
LocalDate [date],
LocalHour [Hour],
count(*) [requests],
avg(web_request_duration) [avg response time],
min(web_request_duration) [min response time],
max(web_request_duration) [max response time]

[Code] ....

View 4 Replies View Related

All Records Within X Minutes Of Each Other

Aug 30, 2005

Consider a table that holds Internet browsing history for users/machines,date/timed to the minute. The object is to tag all times that are separatedby previous and subsequent times by x number of minutes or less (it couldvary, and wouldn't necessarily be a convenient round number). This willenable reporting "active time" for users (a dubious inference, but hey).There are a lot of derivative ways of seeing this information that might begood to get to. What's the fist and last of these sets of times? Whatpercentage of a given period is spanned by active times, and not? What isthe average duration of such periods? What is the average interval betweenweb hits during such periods? During other times?Blah, blah. The basic problem is my principal problem. I don't have muchexperience with cursors, but from what I understand it would be very goodindeed to spare them, given the number of records I anticipate workingwith.I'd be glad of any pointers.--Scott

View 29 Replies View Related

The DB Freezes For 5 Or 10 Minutes

Oct 9, 2007

Hi,
the SQL DB freezes and no one can access the DB for 5 or 10 minutes. Even select queries don t execute, nothing is displayed.

Until we kill the process id that s blocking in the sql activity monitor, only then the DB is released and people can work again.
What does it mean that no query executes until we kill the processes ID? what could it be?

Also, recently we created indexes and ran tuning adviser, is it possible that the creation of indexes cause the freeze of a DB? is that possible?

Thanks a lot for your help

View 6 Replies View Related

Cannot Connect Again After 15 Minutes

Nov 19, 2006

Hi,

I have SQL 2005 full version installed a remote server and when I start my computer I can connect to the database from SQL Managment Studio and a program I'm making. After about 15 minutes I find that I cannot connect using both programs, but if I enter the servers IP address using Managment Studio I can connect (this does not happen with the program I'm making). I have to log of my computer before I can connect again.

Anyone having the same problem or how to fix it??

Thanks

PQSIK

View 1 Replies View Related

Execute Trigger Every Minutes

Feb 13, 2008

I want to create a Trigger that will run every 5 minutes.
This trigger would actually run a Stored Procedure named say "SP_SetRooms".
This SP will in turn run and andupdate the rooms table.
Would anyone know how to help me get started on creating a Trigger with the info I've provided?
Thank you,
Dharmendra parihar

View 4 Replies View Related

SqlCacheDependency Works Just For 2-3 Minutes

Jan 31, 2006

I've the following simple code bound to a button on a Web page

string time = (string)Cache["KEY"];
if (time == null)
{

SqlConnection sqlConnection = new SqlConnection(@"Server=BIZYUSUFSQL2005;Database=Deneme;User Id=sa;Password=;");
SqlCommand command = new SqlCommand(@"select KOLON1 from dbo.CACHE", sqlConnection);
sqlConnection.Open();

SqlCacheDependency dependency = new SqlCacheDependency(command);
time = System.DateTime.Now.ToString();
Cache.Insert("KEY", time, dependency);
command.ExecuteNonQuery();
sqlConnection.Close();
}
return time;
This code has to return the time value from cache. And when a record is inserted into the CACHE table, the cache item has to be invalidated and the new time value has to be returned.
The code works properly for 2-3 minutes. But when there is no activity for 5 minutes, the cache invalidation does not work anymore.
 

View 1 Replies View Related

How To Subtract Minutes From The Date?

Oct 18, 2007

I want to fetch all the records which are 2 minutes older
How can I do it?

View 2 Replies View Related

Replicate Every 15 Minutes: Insane?

Jan 15, 2008

The company I work for has no experience with replication, and neither have I.
Now I recieved a functional specifications document and apparently what they want is use replication to maintain a copy of a production database on the data warehouse server.
The database is 70GB, and they want to do it every 15 minutes (so their reports will contain up-to-date data).

As I said, I know nothing about replication, but to me, this sounds like madness. I fear that this will will (at least) have a negative impact on the performance of the production database.

So is it possible? Does replication have a big impact on the database or is it hardly noticable? I expect about 500 new records every 15 minutes; production database and data warehouse are on different servers; both are SQL2005.

View 6 Replies View Related

8000 Records In Over 12 Minutes?

May 28, 2014

I have the following SQL select query:

Code:
SELECT
inbound_emails.inbound_email_id,
inbound_emails.campaign_id,
campaign_header.campaign_name,
customers.customer_name,
inbound_emails.date_received,

[Code] ....

Without any indexes (other than PK's) this query would take 1min 21 secs to return all 8500 records.

I wasn't satisfied with that so I added indexes to the tables.

Indexes are;

inbound_emails:

PK: inbound_email_id
1. campaign_id (non-unique, non-clustered)
2. email_from (non-unique, non-clustered)
3. email_to (non-unique, non-clustered)

campaign_header:

PK: campaign_id
1. campaign_name (unique, non-clustered)

customers:
PK: customer_id
1. customer_name (unique, non-clustered)

contracts:
PK: contract_id
1. contract_name (unique, non-clustered)
2. customer_id (non-unique, non-clustered)

Have I made a hash of the indexes? Or is the query statement badly written? What is a reasonable amount of time to expect to retrieve 8500 records?

I think email_from and email_to on inbound_emails is the main culprit, but I don't understand why?

View 11 Replies View Related

Days Hours Minutes

Apr 18, 2008

I have two field and I need to find the sum I guess of them. One is called the clm_dout (process date) and the other one is clm_rcvd (received Date). These are both date and time fields and it looks like this 2006-03-17 00:00:00.000. I need to create a formula that wiil i guess give me the difference and create it into hour and minutes because I an trying to create a turn around report. this is what I had...

TimeValue({clm_doubt}-{clm_rcvd})

This is not working for me. Can someone give me a suggestion please.

Thanks!

View 2 Replies View Related

Convert Seconds To Minutes

Oct 28, 2005

I need to convert 300.876 to 5:00.876 in classic asp. Can anyone help?

View 1 Replies View Related

Calculate Hours And Minutes

Nov 6, 2006

Hi
Can anyone help me convert a number to give the result in hours and minutes? For example 195 as 3:15 or 210 as 3:30. We are trying to create a report showing hours and minutes worked without having to export to Excel.

I've had a look around the net and this seems to be quite a difficult function in SQL Server.

Any guidance much appreciated.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved