I need to up the Maximum Memory setting.
Out of the box it is set to 2147483647 MB.
I assume this is ~2GB. I have been instructed
to set it to 1GB less than total server memory
which is 16GB. When I change the value
it just changes back.
How do I change it and how are these Megabyte
numbers calculated?
OS: Windows 2003 R2 Enterprise
SQL: SQL Server 2005 Standard
Thanks!
I am curious about maximum memory setting .
Should we set maximum memory setting for each SQL server? For example a server has 6 GB memory then should we set maximum memory setting = 3.5 GB ?
We have several 2005 servers with "Maximum server memory" set to 214 gig, which I believe is the default at installation time. I am told that this means "use all the memory there is including paging." Well, this is nuts but the servers seem to work fine with this setting no matter how much physical memory they have.
One of our 2005 servers recently started paging like crazy, so I reduced "Maximum server memory" to 6000 and the paging disappeared (server has 8 gig of physical memory) and the server appears happy.
I can not explain why only this one server has this paging issue and the others do not. Should I be setting "Maximum server memory" on all my servers? Are there other considerations which might cause the server to eat-up all the memory? As far as I know no other applications run on this box.
Thanks,
Michael
Hello, everyone:
I have SQL Server 2000 Standard Edition running on Windows 2000 Server. There are always memory full alter. I am going to configure that.
I hope a clearation about a concept. In my enviroment, does SQL Server take maximum memroy upto 2GB, no matter if QWE is enabled?
BOL said AWE is available only in the SQL Server 2000 Enterprise and Developer editions. Does it mean AWE cannot be configured on SQL Server 2000 Standard Edition?
Thanks
ZYT
I am trying to find a suitable size for TempDB in RAM .
Is it possible to find the instantaneous maximum usage of the TempDB in RAM?
In other words how can I find the maximum amount of memory used* by TempDB ?
bim@sifas.com.tr
mikiz@turk.net
If I change the Maximum Memory option (sp_configure or vai EM), do I need to restart the MSSQL service?
Clive
I have a situation with a 6 server setup whereby merge agentswill not run if other merge agents are alreay running. Basicallywe have a 5 laptop, one tower config with the tower being thepublisher. In theory we want to be able to hook a laptop upand have it sync within, say, 5 mins. Trouble is, if agents forthe other laptops are running (trying and failing to connect becausethose laptops aren't connected) then the agents for the laptop that*is* connected won't run. It seems to be a 'maximum number of runningagents' issue. Is this is user defined setting, and if so where can I set it?Many thanks, sorry if this has been answered many many times before.Jim--Find me at http://www.ursaMinorBeta.co.uk"Brace yourself, this might make your eyes water."
View 3 Replies View RelatedHello,
I have been trying to find out what the maximum memory we can have on SQL7 standard edition server. Have not been able to find it anywhere...
Anuy ideas would be greately appreciated.
TIA
B.
A query was taking 20 seconds and consuming 70% CPU takes only 1 second after setting Maximum Memory property to 2048 MB - why?
Server:
OS Microsoft(R) Windows(R) Server 2003, Enterprise Edition
Version5.2.3790 Service Pack 1 Build 3790
8 GB memory
Two Dual-core AMD Opteron 285 2.6GHz Processors
Server is not configured for AWE
Fiber channel connection to EMC Clarion - two LUNs - one for MDF, one for LDF
SQL 2005
SQL 2005 32 bit Standard Edition - SP1 (version 9.0.2047)
Three instances installed on server - only one instance in use
Binaries and system databases on local mirrored disk
Database file (MDF) on one EMC LUN - dedicated physical drives
Log file (LDF) on one EMC LUN - dedicated physical drives
Query in question:
SELECT TOP 10 Address.Address1, Address.Address2, Address.City, Address.County, Address.State, Address.ZIPCode, Address.Country, Client.Name,
Quote.Deleted, Client.PrimaryContact, Client.DBA, Client.Type, Quote.Status, Quote.LOB, Client.ClientID, Quote.QuoteID, Quote.PolicyNumber,
Quote.EffectiveDate, Quote.ExpirationDate, Quote.Description, Quote.Description2, Quote.DateModified, Quote.DateAccessed, Quote.CurrentPremium,
Quote.TransactionDate, Quote.CreationDate, Quote.Producer FROM ((Client INNER JOIN Address ON Client.ClientID = Address.ClientID) INNER JOIN Quote ON
Client.ClientID = Quote.ClientID) WHERE (Quote.Deleted = 0) AND ((Address.AddressType)='Mailing') ORDER BY Client.Name
Address table - 161,075 rows
Client table - 161,634 rows
Quote table - 59,145 rows
With default maximum memory setting (2,147,483,647 MB) - query runs in 20 seconds and consumes over 70 % of the CPU.
After changing maximum memory setting to 2048 MB, query runs in less than 1 second.
Question is:
What is the best practice for setting the minimum and maximum memory settings for SQL 2005?
What can be monitored to identify the cause of these type of issues - using profiler, PerfMon, other tool?
Thanks
How to set maximum server memory by using sql scripts in sql server 2014?
View 5 Replies View RelatedI have a few questions about memory setting inheritedWindows 2003, SQL Server SP4, both Enterprise Edition 8 GB RAM1. How to know how much Memory SQL can address ( SQL script is betteras there is no access to Perfmonitor or EM ) . ie what is maximummemory SQL can use ?2. In this server awe is set to 0 . Do I have to turn it to 1 so thatSQL can use all memory .3. If awe is enabled, what is the minimum and maximum memory size needto be set ?4. Should I set max worker set also ?If someone can provide examples of /PAE, /AWE. /3GB ,/USERVA etc , I amgratefulThanksSrinivas
View 3 Replies View RelatedI am using SQL 8 Personal edition with sp2 applied. I set the maxserver memory to 32MB and leave the min server memory at 0. When myapplication starts hitting the database hard the memory usage reportedthrough task manager peaks between 41-42MB. I've stopped and restartedthe MSSQLserver service and checked that the running values are what Iset them to be. Does anybody have any ideas as to why the sqlservr.exewould be utilizing more memory than the configured value?This message was posted some years ago but nobody answered. Now I havethe same problem! Does anybody have an explanation?Thanks a lot
View 4 Replies View RelatedI have an issue with my production server regarding memory usage (Memory Utilization is above 95%.). Memory is : 12 GB and the service that is consuming the majority of memory 88%/10.5GB is sqlserver.exe. So it would appear that MSSQL is not set to restrict the amount of memory it uses ? How much should I set for min and max memory ? the defauld is min memory : 0 and max : 2 TB
View 5 Replies View RelatedI am running SQL 2005 Standard under Windows 2003 Standard with 8 GB of RAM in one of our 64 bit servers; I noticed min server memory was set for some reason to 128 MB and max server memory to 6114 MB by the previous DBA. We plan to upgrade it to 32 GB. What is the best approach when changing those values ? Should I change those values to the defaults (0 - 2147483647) or create min and max boundaries? . This box is only utilzed by SQL.
Also I know that those changes are reconfigured dynamically so no need to reboot, but would this place any performance hit in the server and should I use Management studio or sp_configure ? (for some reason I don't trust Management studio for these type of changes :))
Thanks,
Carlos
I have a client server that has win2000 on it with sql 2000 enterprise edition. The box has 4 gig of memory on it. I noticed today that the sql server was set to use all 4 gig (even though I know sql can't really access that memory because sql can't really utilize the 2-4 gig range). Is there overhead or a downside to leaving it at this, or should I set it to 2 gig
View 3 Replies View Relatedhi, here is the situation, my system has the following specks
hard drive = 45GB
memory = 1152 mb
Opsystem = win NT 4.0
application on the NT is ftp server and SQL server 6.5
I am having a tough time retrieving a simple query from a 11 million records.some of the feed back from the newsgroup is that I do not have enought memory. Is there a formula to use to figure out how much memory should allocate to the sql server? what if I allocated too much memory, does that affect the sql performance in a negative way?
Please help......
I can be reach at a.alhussein@mci.com
thanks alot
regards
Ali
We have a SQL 2005 installed in Windows 2003 64 bit system, which has 16 CPU and 32GB RAM, but the performance is poor. SQL server is AWE enable and the sql start account with "Lock Pages In Memory". I checked the task manager and it looks that the SQL server used only about 300 MB memory. Here is what I found:
http://blogs.msdn.com/psssql/archive/2006/11/28/sql-server-becomes-sluggish-or-appears-to-stall-on-64-bit-installations.aspx?CommentPosted=true#commentmessage
What I need to do?
Thanks
After I have set the maximum sql server memory in sql server 2014 using sp_configure, do I need to reboot whole server or restart sql service?
View 4 Replies View RelatedHi,
I am testing SQL 2005 Standard (32 bit) on a Windows 2003 Server 64 bit with 8GB of RAM? Should I enable the AWP Setting or not and should I change the maximum server memory (currently saying 2GB)?
Thanks!
Tom
I would like to know what happens when a very large reference data set for a lookup transform with full caching enabled is getting loaded during package execution and the computer memory runs out or is very low.
Does SSIS
a) give an out of memory error of some sort
b) resort to a no caching or partial caching mode
c) maintain the full caching mode but will switch to using the paging file(virtual memory).
I think it will resort to using the page file in which case the benefits of in memory lookups are lost and performance would suffer. If I cannot upgrade the memory or shrink the reference set somehow, i should switch that lookup task to use partial caching or no caching with an indexed lookup table. Would this make sense?
I have some code I build 2 weeks ago which I’ve been running daily but it’s suddenly stopped working with the following error.
“The table "tbl_Intraday_Tmp" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit” When I google this there seems to be a related to tables with vast numbers of columns.
My table tbl_Intraday_tmp is relatively small. It has 7 columns. 1 of varchar(5), 3 of decimal(9,3) and 2 of decimal(18,0). The bit I’m puzzled with is it was working and stopped.
I don’t recall changing anything but I wouldn’t rule that out. I ‘ve inspected the source files and I don’t believe they have changed either.
DECLARE
@FileName varchar(50),
@Path varchar(50),
@SqlCmd varchar(1000)
= '',
@ASXCode varchar(5),
@Offset decimal(18,0),
[code]....
I am using MS SQL server 2008, and i have a table with 350 columns and when i m trying to create one more column its giving error with below message -
Warning: The table XXX has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes.
INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
how can i resolve this?
SQL Server 2000 8.00.760 (SP3)I've been working on a test system and the following UDF worked fine.It runs in the "current" database, and references another database onthe same server called 127-SuperQuote.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = [127-SuperQuote].dbo.tblCompany.Address1FROM[Work] INNER JOIN[127-SuperQuote].dbo.tblCompany ON [Work].ClientID =[127-SuperQuote].dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDSo now the system has gone live and it turns out that the live"SuperQuote" database is on a different server.I've linked the server and changed the function as below, but I get anerror both in QA and when checking Syntax in the UDF builder:The number name 'Zen.SuperQuote.dbo.tblCompany' contains more than themaximum number of prefixes. The maximum is 3.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = Zen.SuperQuote.dbo.tblCompany.Address1FROM[Work] INNER JOINZen.SuperQuote.dbo.tblCompany ON [Work].ClientID =Zen.SuperQuote.dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDHow can I get round this? By the way, I've rather simplified thefunction to ease readability. Also, I haven't posted any DDL because Idon't think that's the problem!ThanksEdward
View 2 Replies View RelatedI am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies View RelatedHello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
I've a database with a memory optimized filegroup on it. How can I remove it?I have removed the memory optimized table I had on it, but when I try to remove the filegroup I receive an error.
View 12 Replies View RelatedHi,
I am going to install SQL Server 2000 (then SQL 2K5) on a Win Server 2K3 with 8 GB of ram, but it will be 16 GB in the near future.
I would like to reserve a fixed memory (for momemt less than 3-4 GB) for SQL Server and the rest for application (virtualization).
Without AWE enabled, max memory for SQL Server 2K5 is 4GB as for SQL Server 2000?
How can I manage and optimize memory keeping in mind AWE. (any doc, website available?)
Thank