Setting Network Affinity In Sql Server 2005
Mar 21, 2007
I have recently upgraded my databases from SQL 2000 to 2005. In 2000, I could set the network affinity so that sql server was only accessible from one of the two network cards. I cannot find how to do this in sql 2005. Is there a way?
In my installation, I have two network cards in each server. The "A" network adapter connects to the "A" hub, and the "B" adapter connected to the "B" hub. Traffic on trhe "B" hub is my private, non-routable network, This is where I want the SQL Server traffic to run. The A hub traffic is the public network. This gives me the ability to isolate SQL Server from the outside world.
View 1 Replies
ADVERTISEMENT
Jan 7, 2005
Hello Friends,
I'm trying to set affinity to mssearch.exe in our Windows 2000 Advanced
server (4cpus), but i am getting an "Access denied error". I checked the login which has administrator rights to the box.
It would be a great help if anyone can tell how to fix this.
Thanks
Haja
View 1 Replies
View Related
Aug 29, 2006
Hi All
Can u pls tell me How to Get the SQL Affinity Mask value in Sql 2005.
and what is the table/views name that store this info.
for SQL 2000 , we were using following query:
SQLStatement.printf("select c.value from master..sysconfigures c, master..spt_values v,"
"master..syscurconfigs r where v.type = 'C' and v.number = c.config and v.number >= 0 "
"and v.number = r.config and v.name ='affinity mask'");
lErrCode=SQLExecDirect(hStmt,(SQLCHAR*)pszSQLStatement,strlen(pszSQLStatement));
lSQLBindCol(nAffMask);
But With SQL 2005 , we are getting ZERO(0) ROWS SELECTED.
View 1 Replies
View Related
Jan 21, 2008
I have a dual 64 bit quad core server with 16 GB of memory. We are going to run an application server and SQL Server 2005 SP2 CU4 64 bit on this hardware, but we only want to purchase a single CPU license for SQL Server. The obvious choice is to use the affinity settings to prevent SQL Server from using one of the CPUs.
Initially, the development team simply went into SSMS and unchecked affinity mask and affinity io mask for the first four processors. This appeared to work fine in their testing. A problem arose when we started monitoring the maintenance plan and saw that the database integrity check was failing. The root problem was this invalid state that the affinity masks were in.
I have seen a lot of documentation stating the SQL Server will ignore an invalid mask setting, but in our testing, it appears that SQL Server respects the setting. For example, when we set CPU 7 to be available for processing and IO, Performance Monitor showed that only CPU 7 was used during a load test.
So from our preliminary testing, it looks like SQL Server will use a single CPU for both processing and IO if you tell it to. Is there some other reason why these affinity settings need to be mutually exclusive? Is there a test I can run that can illustrate why?
View 7 Replies
View Related
Jan 9, 2007
Hi everyone,
Primary platform is 2005 under 64-bit.
I'm trying to figure out what does 'Processor Affinity' and 'I/O Affinity' means when you're viewing server properties. We've got eight processors.
Thanks for your comments,
View 4 Replies
View Related
Mar 6, 2007
I am trying to connect to a sql server from my asp.net application via windows authentication using the Network Service account. When I try to create a login for the ComputerNameNetwork Service account I get the following error.
I know I haven't mistyped it because I clicked the check names button and it showed as a valid id.
So what gives?
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Create failed for Login 'PREMIERDCNetwork Service'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Login&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Windows NT user or group 'PREMIERDCNetwork Service' not found. Check the name again. (Microsoft SQL Server, Error: 15401)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=15401&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 5 Replies
View Related
Oct 4, 2007
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
View 3 Replies
View Related
Sep 17, 2007
I'm experiencing some problem with the affinity mask and affinity I/O mask configuration.
We are running SQL Server Enterprise Edition 2005 64bit on Windows 2003 Server 64bit with 4 dual core CPU. The actuelly configuration is:
Affinity Mask Affinity I/O Mask
CPU0 0 0
CPU1 0 0
CPU2 1 1
CPU3 1 1
CPU4 1 1
CPU5 1 1
CPU6 1 1
CPU7 1 1
We did it so, because we are running LiteSpeed Tool for the backup. LiteSpeed is configured to use CPU0 and CPU1.
Now, we know that the settings are wrong. If Affinity mask is 1 affinity I/O mask should be 0 and vice-versa.
My question is: how many CPU should I enable for affinity mask and how many for affinity I/O mask. Which are the correct criterias.
Thx in advence.
Laurent
View 2 Replies
View Related
Aug 21, 2015
On NumaNode1 and NumaNode3. I can see all of the CPU's there but the checkboxes are disabled.
What could be disabling these?
View 4 Replies
View Related
Mar 19, 2007
I installed SP2 for SQL2005 Server and now it's not showing through the network and I wonder why?
Thanks alot.
View 4 Replies
View Related
Mar 6, 2008
Hi,
I need to find out whether SQL Server client components are installed on a machine through my application.
For that I was expecting "SOFTWARE\Microsoft\Microsoft SQL Server\90" registry key. BUT If I install just native client drivers, this key is not getting created.
What could be another approch to determine whether system has required client components.
Also I need to list all the SQL Server 2005 servers available in the network. (Similar to the Servers combo box being populated while DSN creation in ODBC Admin tool). There are several approches.
1) Use NetServerEnum API
2) Use SQLBrowseConnect ODBC API
3) Use SQLDMO Object
4) OSQL utility.
Which one I should use VC++ (2005)?
Thanks in advance,
Mac
View 6 Replies
View Related
Mar 7, 2006
Hi All, first post.
I have done a bit of searching around and cant find a clear answer to this question.
Current Setup
Desktop application (c#) that connects to a SQL Server 2005 express database on the same local network as the application (currently 3 users)
It is only a very small company and has just taken on their first remote worker, but expects to take on another 6-8 over the next few months. They have asked for the database to be moved online.
The application was written in such a way that everything has been done using no stored procs, or views, it is all native SQL.
This will be my first DB hosted online and before I go ahead and do anything I just wanted to make sure what I have to do is correct, sorry if this is a very basic question, although I have been programming for a long time, I have never had the chance to do any online databases before.
Will this work.
1.Find a SQL Server 2005 Hosting company.
2.Move the database to the server.
3.Setup the users permissions.
3.Alter the connection string in the application to point to the new location.
So the only thing that would change would be a new connection string in the application preferences?
Or am I living in a dream world, because nothing is ever that simple.
One thing I am worried about is the security/visiblity of the database and data as it travels from the server to the client and back.
Thanks for any advise you can give.
Mark
View 2 Replies
View Related
Apr 16, 2008
Hello all,
I have 2 networked PC's both running vista ultimate
1st is Laptop and is running its own SQL Server at laptoplaptopSQL
2nd is Desktop and is running its own SQL Server at desktopdesktopSQL
Now both machines have seperate windows login accounts.
When I go SQL Server management studio I go to browse and each machine can see the other machines SQL Server, but when I go to login I get SQL Login falied for users" The user is not associaed with a trusted SQL server connection".
So I then go to logins new login and try to add my other pc's user account.
The problem I see is that when I go to search and then location it only shows its own PC's location and not the location of my other networked pc? So if I am on Desktop and in my theory want to add laptopuser to the desktop SQL Server logins I get:
"create failed for login laptopuser
An exception occurred while executing Transact SQL statement laptopuser is not a valid windows NT name. give the complete name
Not sure on where to go from here.
Any help would be great
View 10 Replies
View Related
May 21, 2007
Hello,
Say that I have 100,000 attributes/feature selections for my SQL Server Neural Network Algorithm.
Customer Attr1 Attr2 Attr3 ..... Atr100000
==============================
Jack 1 0 1 ..... 1
Sam 0 1 1 ...... 0
Mary 1 1 0 ...... 1
Knowing the fact I can't fit those info on a table and SQL Server's Neural Network does not support table prediction . What's an alternative to use Neural Network in SQL Server 2005 to solve my problem?
Please assist!
Mary
View 5 Replies
View Related
Aug 30, 2006
Hi,
I am new to SQL Server and I am trying to install SQL Server 2005 Express or Stnadard Edition on a computer runing XP pro on a XP's workgroup network using a router. Can I access the the database from another computer running XP pro on the same network? If I can, what setting do I need when installing SQL 2005 in order to do this?
Any help is appricated.
View 1 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Aug 15, 2006
Can anyone tell me why I am getting this error when I try to select * from a table through a newly created synonym? I have admin rights to both db, but they are on separate servers.
<Error>
OLE DB provider "SQLNCLI" for linked server "srvDEV" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
</error>
<code>
CREATE SYNONYM ARContractTerms_syn FOR srvDEV.EricsAdeptCastle.dbo.tblARContractTerms
SELECT * FROM ARContractTerms_syn
</code>
Am I running into schema problems?
Thanks all
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.2900.2180
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
View 2 Replies
View Related
Mar 7, 2007
Is there any setting to indicate Unicode data to handle, so that no need to exclusively use Unicode data types ( ex nvarchar ).
I need to execute both Unicode and non Unicode SQL statements with in one environment. I don't want to create seperate database again.
Please let me know if any one had approached on SQL server this way. I am looking the way Oracle provides where you don€™t need to declare the data type of the column as Unicode type in table definition but can indicate when running a query to manipulate that field as Unicode field.
Thank youSunil
View 1 Replies
View Related
Jun 14, 2007
Hi there
im trying to set up a replication from a local server to a remote server.
when starting up and selecting the Distribution / publisher, i get the following errors --->
Details as followed...
TITLE: New Publication Wizard
------------------------------
SQL Server is unable to connect to server 'SERVERX'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
and...
===================================
SQL Server is unable to connect to server 'SERVERX'. (New Publication Wizard)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
===================================
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.CheckServerAlias(ServerConnection conn)
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.Open()
at Microsoft.SqlServer.Management.UI.CreatePublicationWizard.PrepareToShow()
View 3 Replies
View Related
Dec 4, 2007
Hi,
We have (after several weeks of testing in all kind of environments) send out a new version of our application to several of our customers. Within days problems where drippin in; After looking for the problem on various customer situations we found a problem which I think is rather disturbing and very odd. I'll describe the situation, on which we finally managed to recreate the problem, here.
In my problem I use the following configuration:
Windows 2003 (standard edition) AD network with 2 domain controllers, multiple Windows XP workstations, some without SQL instances, some with SQL 2000 instances, some with SQL 2005 instances and even one with SQL 7 running.
All run a 32 bit OS.
Tools to reproduce:
ListSQLSvr application (found on SQLDev.net) to enumerate the instances.
Problem description:
--------------------------------------------------
I am running the machine called DEV001, which has SQL 2000 (instancename DRUMIS) and SQL 7.0 (has no instancename so this is the root instance) installed.
In any 'normal' situation all the runnings SQL instances are visible on the network like this:
Code Block
C:>listsqlsvr -X
(local);Clustered:No;Version:7.00.623
ADM002DRUMIS;Clustered:No;Version:8.00.194
DEV001DRUMIS
DEV001DRUMIS;Clustered:No;Version:8.00.194
DEV002DRUMIS;Clustered:No;Version:8.00.194
DEV002EXPRESS;Clustered:No;Version:9.00.3042.00
DEV002EXPRESS
INSADBACKOFFICEDRUMIS;Clustered:No;Version:8.00.194
INSADBACKOFFICEEXACT;Clustered:No;Version:9.00.3042.00
INSADOFFICEWSUS;Clustered:No;Version:8.00.194
SUP001DRUMIS;Clustered:No;Version:8.00.194
When I turn the SQL 2005 Browser service off on the machine called DEV002 the list looks like:
Code Block
C:>listsqlsvr -X
(local);Clustered:No;Version:7.00.623
ADM002DRUMIS;Clustered:No;Version:8.00.194
DEV001DRUMIS;Clustered:No;Version:8.00.194
DEV001DRUMIS
DEV002
DEV002EXPRESS
DEV004DRUMIS;Clustered:No;Version:9.00.3042.00
INSADBACKOFFICEDRUMIS;Clustered:No;Version:8.00.194
INSADBACKOFFICEEXACT;Clustered:No;Version:9.00.3042.00
INSADOFFICEWSUS;Clustered:No;Version:8.00.194
SUP001DRUMIS;Clustered:No;Version:8.00.194
Notice that the browser service might be off on DEV002, you can still see the EXPRESS instance and a new root instance has appeared (though it doesn't exist!)??
After restarting the Browser service all is OK again.
When I turn on Hide Server in the SQL 2000 TCP/IP properties (or turn it on in the registry [HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerDRUMISMSSQLServerSuperSocketNetLibTcp] "TcpHideFlag"=dword:00000001) on the DEV002 computer something real scary is happening..
The list looks as follows:
Code Block
C:listsqlsvr -X
(local)
ADM002
DEV001
DEV002
DEV004
INSADBACKOFFICE
INSADOFFICE
SUP001
When someone has entered a database (for example the backoffice database on INSADBACKOFFICEEXACT) the list looks as follows (for a short moment; 5 secs or so):
Code Block
C:listsqlsvr -X
(local)
ADM002
DEV001
DEV002
DEV004
INSADBACKOFFICEDEVELOP;Clustered:No;Version:8.00.194
INSADBACKOFFICEDRUMIS;Clustered:No;Version:8.00.194
INSADBACKOFFICEEXACT;Clustered:No;Version:9.00.3042.00
INSADOFFICE
SUP001
Notice now that ALL instances are gone and no extended information is available. In the Query Analyser and in the SQL Management Studio when browsing you'll see this as well!
When someone is accessing a database instance it appears for a few seconds again.
Since our installation and applications rely on selecting a existing instance it will fail in the above situations (or at least not showing all available instances).
In my opinion this is a bug somewhere!
Note that even when the SQL Services are stopped on DEV002 (leaving the Browser service running) it still seems to block out ALL instance on the ENTIRE network!
I don't mind that one INSTANCE or even the entire MACHINE is hidden from the network, but ALL instances on ALL machines??
And the SQL Browser issue also worries me a bit since it does not stop the possibily to browse the SQL instances; it removes the SQL2000 instances but adds a root instance which doesn't even exist! Also the extended info is stripped.
Can anyone help me solve this/advise?
Also mind that in any situation there might run a lot of computers with a lot of SQL instances and I cannot tell our customers to find which machine has the SQL TCP/IP properties set to Hide...
It even seems that in some situations SBS 2003 does the hiding automatically on Install? And if so, when and why?
Regards,
Albert van Peppen
Senior System Engineer
Insad Grafisch b.v.
View 31 Replies
View Related
Feb 11, 2008
Hello. I am called Narsiste.
I have a problem of configuration in SQL server 2005 express train. In fact, I do not know how to make the configuration to tackle the databases SQL server 2005 express train which are on a station has starting from a station B (both being in a network LAN).
But I read in the module of €œconfiguration of the surface of exposure for the services and connections - localhost€? that €œBy defect, the editions Express train, Evaluation and Developer SQL SERVER 2005 authorize only local connections.€?. As it is BY DEFECT, I said myself that it will have to be changed a parameter so that access TCP/IP can go on this version of SQL SERVER.
Here is the message which I have:
€œAn error occurred during the establishment of a connection to the waiter. At the time of connection to SQL Server 2005, this failure can be due to the fact that the default settings of SQL Server do not authorize remote connections. (Provider: Interfaces network SQL, error: 26 - Error during the localization of the waiter/the authority specified) (Microsoft SQL Server, Error: -1)€?.
If somebody encountered this problem in the past, that he wants to inform well me of the solution which he found for this last. Thank you.
View 1 Replies
View Related
Jan 10, 2008
Hi,
I have an SSIS package designed to copy across a file from local machine to a location on the network.
The SSIS package works fine when I run it directly run it in the Designer, ie, it copies over the file to the network.
But when I run the package through the Job server agent, it fails giving me a validation error on the network path..
Does it have to do with the permissions of the User account used here? Could anyone please provide any information on this....
Thanks
View 14 Replies
View Related
Nov 29, 2005
Hi,I had the SQL Server Express installed on my desktop and it was working just fine. Now, I upgraded to .Net 2.0 and I had some problems with the SQL Server Express just like in post http://forums.asp.net/1070169/ShowPost.aspx.These problems were solved by using a cleanup tool but now when i try so setup the SQL Server Express 2005 i get the error:SQL Server Component Update will install the following components for SQL Server Setup:- (ok) Microsoft SQL Native Client- (error) Microsoft SQL Server 2005 Setup Support FilesErrors occurred during the installation:Error 1603 installing Microsoft SQL Server 2005 Setup Support Files.See log file for more detailed information.Fatal error during installation.The log file as lots of information such as:Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_WS10170_Support.log Last Action : InstallFinalize Error String : The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}. Error Number : 2908 -------------------------------------------------------------------------------- WS10170 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information. Can someone please help me on trying to avoid format the desktop.Thanks,Stromberg
View 2 Replies
View Related
Jul 17, 2006
My manager has asked me to install and configure Source Safe so that our team can check out stored procedures, (and other objects), and check them back in when we are finished working on them.
I'm not familiar with Visual Source Safe. Does SQL Server 2005 work with Visual Source Safe in such a way that I can check out/in SQL Server objects such as procedures?
If someone knows the answer, or perhaps an existing thread that covers this, please let me know.
Thank you for your time!
Frank
View 1 Replies
View Related
Jan 2, 2007
Im trying to setup replication between two 2005 standard editions. They are on the same LAN and installed equally + SP1. They are installed as named instances (with the same instance name MSSQL01). Remote access is allowed and TCP/IP and shared memory and I can connect between them.
SQL1MSSQL01 is configured as the publisher & distributor and the snapshot is done. When Im using the subscriber wizard from SQL1 to create the subscriptions and add SQL2MSSQL01 as a subscriber the connection fails to the remote server.
The error message is:
TITLE: Connect to Server
------------------------------
Cannot connect to SQL2MSSQL01.
------------------------------
ADDITIONAL INFORMATION:
Failed to connect to server SQL2MSSQL01. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
When I do a manual connection to SQL2 using the server managemnet studio on SQL1 I cannot connect using the instance name e.g. SQL2MSSQL01, it works only when only using the server name e.g. SQL2. Then I have full access both when using a windows or SQL user.
When trying with using the server name only when setting up the subscription, I got a error saying that I need to use the full name.
TITLE: Connect to Server
------------------------------
Cannot connect to TFMHQARNDE07.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, ' SQL2MSSQL01'. (Replication.Utilities)
I can also mention that theese servers are cloned from another server and I needed to drop the old servername and add the new servername (sp_addserver) on both servers to get the publisher to work.
When I try to setup the subscription from SQL2 and add SQL1 as a publisher I get the same error.
Any one have any idea what it can be?
View 1 Replies
View Related
Jul 16, 2007
Hi there,
I am looking for a way to have SQL server accept incomming e-mails and store the contents of the e-mail into the database. I was doing some research on the subject of recieving emails from a SMTP server with the server having an account, but it looks like there are no information on the subject.
Is this possible? Or do I have to use some sort of work around hack?
Thanks in Advance,
Liv
View 6 Replies
View Related
Jul 6, 2006
Hi
I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.
Has anybody done this before. If yes what will I need to check. Can you please let me know :-
1) SQL Server 2000 which SP should be installed to support this enviroment.
2) SQL Server 2005 which SP should be installed to support this environment.
3) Any thing that I need to look out for.
Thanks for any inputs on this.
Regards
View 3 Replies
View Related
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Aug 1, 2007
I have 2 different servers that run nightly backup jobs to a network drive using the UNC format. I am noticing the larger databases encountering the following errors on a regular basis
Error: 18210, Severity: 16, State: 1.
'\fnfssql3SQLBackupsMNSQL05<database>.BAK'. Operating system error 64(The specified network name is no longer available.).
BACKUP failed to complete the command BACKUP DATABASE <database>. Check the backup application log for detailed messages.
There are 5 databases on this server all backed up by the same job and 3 of them wortk fine and 2 of them fail so it is not a permissions problem. Have there been any problems with backing up to a network drive in 2005?
View 4 Replies
View Related
Dec 18, 2007
I'm green on this networking stuff so any help is greatly appreciated.
I have setup my home computer as a server and assigned a static IP to it. I installed SQL Server 2005 Developer and allowed remote connections to it through the Surface Area Config tool, added port 1433 TCP and 1434 UDP to firewall's exception list, and started the SQL Server Browser service.
Now I can't seem to remote connect to this SQL Server from my office network. Is there something I'm doing wrong here?
Thanks!!
View 3 Replies
View Related
May 27, 2008
I am trying to restore database from network drive but
sql server 2005 express is giving error
"system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files
or insufficient memory or disk space (microsoft.sqlserver.express.smo)."
But when I restore database from "C:" or local drive it alows to do so.
Can anyone help.
View 5 Replies
View Related
May 2, 2006
Hi there!
My provider does not yet support SQL Server 2005, they are still on SQL Server 2000. I put together a very basic login page, but it is crashing everytime I access it because of this problem, and sadly I am not advanced enough as yet to know how to remedy it! Can you help?
Here is the error page, some of it; - Any ideas gratefully received!
Russ.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
View 1 Replies
View Related
May 15, 2006
How would Set permissions Sql Server 2005 so that I can access a asp page created in VWD and Sql Express.
On the production server i have just the one instance of Sql
I have the following connection string in the web config file:
<connectionStrings>
<add name="ConnectionString" connectionString="server=serversNameXPRESS;uid=aspuser;pwd=aspuserPassworkd;database=DATABName" />
</connectionStrings>
The account i setup to access the db in Sql 2005 Proper on the Production serve is Represented by the name in the above example as “aspuser�. I created this user in security, logins. And I gave permissions to this on the Db level “create procedure delete, select, update insert.�
I get a error when i run the page in the browser that says “login failed for aspuser.�
I know virtual directory is configured properly. I can run aspx page in the directory with out a db connection, without and error.
Any help would be greatly appreciated.
View 2 Replies
View Related
