Setting The Port For The Database Connection In Vs 2005 And Also In Web.xml
Feb 15, 2006
I've mapped a sqlserver machine within vs2005, but when I attempt to set the database connection, I dont see place to stick the port number (even in the advanced area)... it continues to fail when I test the connection.. I can telnet into the machine on the sql server port, so I know its open to me...
Also - when I publish this to an IIS server, what is the syntax for placing the connection and port number in web.config? I've tried various settings, cant get it to work.
<appSettings>
<add key="con" value="Server=12.123.123.123;PORT=1234;UID=*****;PWD=*****;database=mydb" />
</appSettings>
Thanks in advance for the help,
Todd
View 3 Replies
ADVERTISEMENT
Mar 28, 2006
Its not a big deal but enoying enought that i always have to
USE MyDatabase
-- Instead of having it set as the defualt and not adventureworks
View 3 Replies
View Related
Nov 26, 2005
Witam!Mam problem z polaczeniem sie z baza danych po TCP/IP przez port domyslny1433, nie mozna sie telnetowac ani nic z nim zrobic, poprostu niezyje. Portjest zamkniety i nijak nie moge go zmusic do jakiejkolwiek komunikacji nawetpo localhoscie. Skaner portów wykrywa go jako zamkniety. Czy wiecie moze jakten port otworzyc i zmusic go do komunikacji z baza danych? OS win2k3,MSSQL2000 Server.PozdrawiamHello!I have a problem with a TCP/IP connection to Data Base through the 1433port. I cannot telnet on this port even on localhost. My firewalls aredisabled but port scanner see the port as closed. Protocol TCP/IP on theMSSQL Server is enabled and it's not hidden, so I don't know what I shouldto do. My configurations: Win2k3 Server, MSSQL Server 2000Thx for answers.
View 1 Replies
View Related
May 16, 2008
my application connect a sql server which was name instanced.
And the sql server browser was stopped, so i need to specify the port in connection manually .
i try this:
server=xx.xx.xx.xx,1433mssqlserver2;database=master;uid=xxx;pwd=xxx; it always return a error message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
any suggestions?
thanks.
View 4 Replies
View Related
Nov 14, 2003
Hello,
We have ODBC connection problems with some client installation.
Some of them need to have the port number given in the client connect part of the ODBC setup while other (with
the same client version) can use the "dynamically determine port" option, even when the port number is not SqlServer default (1433).
Has someone an idee why this happens and what to change so every connecition can use the dynamic option ?
Thanks
View 1 Replies
View Related
Oct 21, 2006
Hi,
I have setup a linked server to a DB2 database using "Microsoft OLE DB Provider for ODBC Drivers",
the connections works fine i am able to run select queries.
but the number of rows returned from the two following statements are different.
select * from linkedserver...tablename
select count(*) from linkedserver...tablename
e.g. The First statement returns 116 rows, whereas the second query returns count as 144....
I am a bit confused ?????
could anybody think of any possible reasons..
Cheers
ARAW012
View 4 Replies
View Related
Jan 30, 2006
Environment:SQL Server 2005 Enterprise in Win2k3 Enterprise on 32(x86) bit machine
I am able to enable the Trace Flag 1400 using DBCC TRACEON (1400) GO. Only then we can able to configure for the ENDPOINTS.
I successfully configured the ENDPOINTS for both the principal server and Mirror server .And then when I started the START MIRRORING.
I got the error message. Please find the Message below.
An error occured while starting mirroring.
additional Information:
:..>Alter failed for Database 'KQDB', (Microsoft SqlServer.Smo)
:..>An exception occured while executing a Transact-SQL statement or batch
[Microsoft SqlServer.Connection.info]
:..>Database mirroring Transport is disabled in the endpoint configuration.
[Microsft SQL Server,Error: 1486]
If anyone have a solution on how to setup a database mirroring environment.Please send.
View 10 Replies
View Related
May 27, 2015
In our(my company) current design we want to switch from failover clustering to Always On as high availibility solution.
I am currently testing the availiblity Group Listener function and have two questions regarding this.
First of all, is it possible to connect to a a listener by just using its "name" instead of "name,port", it is for our users very inconvenient to start using ports. If this is possible, where can I find information on how to configure this?
Second, is it possible to use the Availiblity Group Listener as loadbalancer or in combination with a loadbalancer to split the users over two or more nodes?*note we don't use azure.
View 4 Replies
View Related
Oct 27, 2015
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
View 4 Replies
View Related
Oct 29, 2007
Hello,
We have an SSIS job that runs once a day and sends emails.
For security reasons, IT switched the send-mail porton the smtp server from 25 to a different number (let's say 1234).
So, I changed the SSIS SMTP Connection Manager's smtpServer string to smptserver:1234
However, this does not seem to be working. I keep getting 'Send Mail Failure' error.
Any ideas how to set the port number for sending emails using SSIS?
thanks much,
Muhammad
Cobalt Group
View 3 Replies
View Related
Feb 29, 2008
I need detailed instructions on how to connect to a database from a Microsoft Access 2007 database to a Microsft Office Accounting 2007 database. The accounting database is an SQL 2005 datbase. It has an instance name of "MSSMLBIZ".
When I try I get an SQL error 53. Do not have permissions or database does not exist.
Thanks in advance for any help.,
View 1 Replies
View Related
Apr 17, 2007
Need url on good kb or article on converting sql 2000 to sql 2005 (full version not express)
Thanks,
Michael Oard
View 4 Replies
View Related
Feb 11, 2008
How does one check which port SQL Server is listening to? How does one know if it is 1433 or 1434?
View 8 Replies
View Related
Mar 14, 2007
When I change the tcp/ip port to anything other than 1433 my SSIS nor DTS packages run successfully. Does the tcp/ip port have to be on 1433 for the SSIS or DTS packages to run successfully?
View 3 Replies
View Related
Feb 13, 2008
I know the ..Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGErrorLog on the server contains the information. But that needs I to RDP to the server or open the file remotely. Is there any other way to find out the port from my SSMS connection?
I remember in SQL Server 2000 you could find the information by choosing Properties of a connection in EM and click on the Network Configuration button. (I know it works when you are ON THE SERVER! But when I tried from my desktop, pressing the button didn't do anything)
Canada DBA
View 2 Replies
View Related
Jan 24, 2007
Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
View 3 Replies
View Related
Jan 26, 2007
Hi,
I'm setting up my SQL Server 2005 instances to use dynamic ports on one of my machines. What is the tcp port range used? I need to know the range so I can open the correct ports on my firewalls.
Thanks
Brian
View 4 Replies
View Related
Oct 19, 2007
Hi All,
I am having an issue with SQL 2005 unattended install, I cannot see where in the template.ini file you can specify the TCP port number for SQL 2005 to listen to I want to change it to a specific port number, I know you can do this in an unattended install on SQL 2000.
Also in an unattended install of SQL 2000 and 2005 is there any way you can specify the database and transaction logs location for new databases to be installed on another drive then the system databases. I know you can change this later in SQL server properties but I wanted this to be done during the install or is there a T-SQL script which can do this after?
Any help on this will be great.
Cheers
Raxso
View 3 Replies
View Related
Sep 11, 2007
OS:Windows XP Professional Edition
SQLServer: 2005(DE).SP2(Have installed 2 instances of 2005 in my local system)
I am trying to do database mirroring,via SQL Server Management Studio.
1)configure security setup,(showed success).
2)when i start mirroring,i am getting the following error.
TITLE: Database Properties
------------------------------
An error occurred while starting mirroring.
------------------------------
ADDITIONAL INFORMATION:
Alter failed for Database 'MIRROR_DEMO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The server network address "TCP://tp190.DELL.servers.corp:5023" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have followed the microsoft link and i have enabled the port numbers aswell.
View 6 Replies
View Related
Apr 22, 2008
Hi
I currently have an SSIS package which looks for an excel file and uploads its. The connection is set up to look for a file upload.xls in a folder called Upload on the C drive. So each time a file needs uploaded, the upload.xls is copied into C:Upload. This all works fine. However now I need to change it so that the files that are uploaded take the format Upload10012007.xls, so they will have the date appended onto the end of the Upload.
How do I go about setting up my connection to look for Upload10012007.xls? The file name will be dynamic as it will change each day but it will always contain Upload at the start of the filename.
Thanks for your help,
Michael
MichaelRaj Arokiyasamy
View 1 Replies
View Related
Feb 7, 2007
I am unclear as to which Ip address to change the standard port on. When setting up a cluster you have multiple IP address's including the nic that is used for the heartbeat. I have not found any documention on how to change both nodes to listen on a port other than 1433..
Any help would be greatly appreciated.
View 1 Replies
View Related
Apr 12, 2007
hello
we have Reporting services and Office Sharepoint on the same server, but the reporting services website is on default website and won't start because MOSS is already using the port.
can i just change SSRS website port ?
thanks
View 3 Replies
View Related
Jan 27, 2007
I am trying to deploy a SQL Server Express database to a remote SQL Server 2005 host. I was planning to copy and paste the data from my local tables to the remote tables using Management Studio Express but my ISP (NTL) appears to be blocking port 1433 and preventing me from getting a connection to the remote database.
Will an upgrade to SQL Server 2005 Developer Edition help me? I understand that it has a Backup & Restore Wizard but how does this work? Does it rely on a remote connection and will it fall foul of the NTL port blocking? Or, can the file that the Backup stage produces be copied into the web-based MSSQL Manager, that my web host provides, to restore to the remote database?
Any help would be much appreciated.
View 11 Replies
View Related
Aug 3, 2007
I have a SQL server database that I am trying to connect to from VS2005 in the Server Explorer.
I am not using the standard port for my SQL server listening port and I don't see where I can tell the Server Explorer to use a different port?
Can someone point me in the right direction for connecting to my database?
Thanks.
View 2 Replies
View Related
Sep 20, 2006
I'm using VWD on SQL2005EXPRESS And i keep getting a connection string errorCan someone show me how to put a connection string in the web.config, or which connection string to use to connect to my host database which they're running SQL2000..Thanks Newbie
View 9 Replies
View Related
Apr 13, 2006
I'm looking for some clarification.
We need to pull data from our DB2 system to our Itanium SQL Server.
Is this simply a matter of setting up the 64-bit DB2 Connect drivers on the Itanium box with the exact same DSN name used on ther 32-bit box used to define and deploy the SSIS package?
Has any one done this, yet? If so, is there anything that we need to look our for?
Thanks,
- Paul
View 1 Replies
View Related
Aug 16, 2007
Dear all
if i want to write one program use vc++2005 to connection access database with MFC system , which idea is best.
does any sample code i can use in this case or any concept i can read it first?
best regard
roger
View 1 Replies
View Related
Jan 4, 2007
Leon writes "I am trying to connect to a W2K3 Server's 2005 Reporting Server through my laptop's (WXP Pro SP2) SQL Server Management Studio.
I turned Port 1433 on in the server's Windows Firewall and was able to connect to the server's database engine from my laptop, but I have to turn Windows Firewall on the server off completely to be able to connect to the Reporting Server.
I have tried all the ports listed for SQL Server in the Microsoft documentation (TCP and UDP), but they seem to have no effect.
Can anyone tell me which port or ports I need to turn on in the server's firewall so that I can access Reporting Services through my laptop's SSMS?
Thanks in advance.
LGR"
View 1 Replies
View Related
Feb 27, 2007
Hi, I hope someone can help me! I changed the TCP port that the default instance of SQL 2005 x64 SP1 is listening on and now SQL server won't start as the port is being used - no problem I say to myself, I'll just change it again, however I can't!
My problem is that I can not change the TCP Port back again using Configuration Manager - no matter what values I put in, after a restart of the instance it comes up with this in the IP Addresses tab for TCP/IP Properties and SQL Server won't start:
IP1
Active Yes
Enabled No
IP Address aaa.bbb.ccc.111
TCP Dynamic Ports
TCP Port 0
IP2
Active Yes
Enabled No
IP Address aaa.bbb.ccc.222
TCP Dynamic Ports
TCP Port 0
IP3
Active Yes
Enabled No
IP Address aaa.bbb.ccc.333
TCP Dynamic Ports
TCP Port 0
IP4
Active Yes
Enabled No
IP Address 10.1.1.1
TCP Dynamic Ports
TCP Port 0
IP5
Active Yes
Enabled No
IP Address 127.0.0.1
TCP Dynamic Ports
TCP Port 0
IPALL
TCP Dynamic Ports 2020
TCP Port 2020
Interestingly, the ip address that the server is listening on aaa.bbb.ccc.444 is not reported in the list of IP addresses in the configuration manager for this instance, yet it is when I view the available IP addresses for the other two instances - is this significant?
I have tried failing to the other node, changing it there, changing it at the console and also while logged onto the the virtual machine remote desktop, rebooting both nodes, etc, etc. There are two other instances on this cluster that are still working fine but I hvae not attempted to change the TCP ports they listen on.
I used the same method to change this default instance as I did for a named instance on a similarly configured cluster and it worked fine. How to fix this?
Regards, Mike
2007-02-27 12:03:17.69 Server Server is listening on [ aaa.bbb.ccc.444<ipv4> 2020].
2007-02-27 12:03:17.71 spid9s Starting up database 'tempdb'.
2007-02-27 12:03:17.72 Server Error: 26023, Severity: 16, State: 1.
2007-02-27 12:03:17.72 Server Server TCP provider failed to listen on [ aaa.bbb.ccc.444<ipv4> 2020]. Tcp port is already in use.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1.
2007-02-27 12:03:17.75 Server Error: 17826, Severity: 18, State: 3.
2007-02-27 12:03:17.75 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-02-27 12:03:17.77 Server Error: 17120, Severity: 16, State: 1.
2007-02-27 12:03:17.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
View 11 Replies
View Related
Dec 12, 2005
Hi I downloaded MSDE2005 and I tried to set up an ODBC connection to adatabase I created. I can see the database using client but I got thiserror through the ODBC manager[Microsoft][SQL Native Client]An error has occurred whileestablishing a connection to the server. When connecting toSQL Server 2005, this failure may be caused by the fact thatunder the default settings SQL Server does not allowremote connections.Can anyone, please tell me what I need to do to get this setup? I triedto dabble with the TCIP and remote setting but nothing worked.Regards
View 1 Replies
View Related
Nov 21, 2006
Hi, I'm fairly new to the asp.net enviroment.. I have a project in asp.net and I need to upgraded to asp.net 2.0... I just did that, and the few errors that I got are resolved already, the only error that I have not been able to figure out is when I tried to retrieve data from a database I get the following error:
An error has ocurred while establishsing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider:Named Pipes Provider, error:40- could not open a connection to SQL Server) and it points to the following line:
Dim ds As DataSet = Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteDataset(ConfigurationManager.AppSettings(GlobalD.CfgKeyConnString), CommandType.StoredProcedure, "PG_LST_MENU_BY_SUBJECT")
As I said before my project with the previous version works fine, and this is the only part that is giving me trouble...
thank you
View 1 Replies
View Related
Mar 24, 2007
I just got a shared hosting plan with godaddy (economy plan) ...
I wrote a simple application with a database. it works fine on my local PC.
I tried to upload my files to the server, but i couldn't get database file on godaddy's server. I did a little research and found out they dont allow uploading database files to their server nor they allow remote access either.
so I logged in to my account and found a database links and I created one (SQL Server)
Host Name
whsql-v44.prod.mesa4.secureserver.net
Database Name
DB_43434
Database Version
2000
Description
maindb
I then logged in to the database and created a new table .. but now I dont know how to make a connection between this database and my application on my pc.
I later found that I must modify my web.config file for the database to work. http://help.godaddy.com/article.php?article_id=689&topic_id=216&prog_id=GoDaddy&isc=
<connectionStrings><add name="Personal" connectionString="Server=whsql-v04.prod.mesa1.secureserver.net;Database=DB_675;User ID=user_id;Password=password;Trusted_Connection=False" providerName="System.Data.SqlClient" /><remove name="LocalSqlServer"/><add name="LocalSqlServer" connectionString="Server=whsql-v04.prod.mesa1.secureserver.net;Database=DB_675;User ID=user_id;Password=password;Trusted_Connection=False" providerName="System.Data.SqlClient" /></connectionStrings>
Now- I am new to web developing, but I do understand that this code is not enough to create the connection to the database. I researched alot but I cant get further.
What code/ settings/ steps do I need to do to get my gridview and other database items connect to the database on godaddy's server ?
any help would be greatly appreciated...
View 1 Replies
View Related
Jan 2, 2008
Good day.
I am trying to look at a friends database that they have developed. Not having used SQL Server Express before I am experiencing problems trying to remotely connect to their database.
He connects locally just fine of course.
I get the error message about remote connectionsand the default settings so I have enabled TCP/IP and Named Pipes as well as cleared SQLSERVER Express in my firewall settings. I also stopped and restarted the service, but still get the same error message.
My connection parameters are like:
Server type: Database Engine
Server name: http://sql.exampledatabase.net (should http be here? have tried with and without same error)
Authentication: SQL Server Authentication (windows authentication? If so, how do I change to such?)
Login: http://username (should http be here? have tried with and without same error)
Password: password
TITLE: Connect to Server
------------------------------
Cannot connect to http://sql.exampledatabase.net
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
Any help would be much appreciated.
BurntBack
View 5 Replies
View Related