Setting Up SQL Server 2005 With Source Safe
Jul 17, 2006
My manager has asked me to install and configure Source Safe so that our team can check out stored procedures, (and other objects), and check them back in when we are finished working on them.
I'm not familiar with Visual Source Safe. Does SQL Server 2005 work with Visual Source Safe in such a way that I can check out/in SQL Server objects such as procedures?
If someone knows the answer, or perhaps an existing thread that covers this, please let me know.
Thank you for your time!
Frank
View 1 Replies
ADVERTISEMENT
Oct 11, 2000
I'm in the process of locking down our SQL Server development environment and wanted to implement some type of version control, not just for stored procedures but for all database objects (tables, triggers, etc.)
A while back I read an article that explained how to utilize Visual Source Safe to establish version control for databases. If I recall correctly, I believe it had something to do with Visual Interdev and creating some project with Visual Interdev.
If anyone can provide alittle more insight into how to accomplish this, or at least point me in the right direction, it would be greatly appreciated.
Thank you in advance for your help!
View 3 Replies
View Related
Apr 3, 2006
Can someone give some comments on which program to use with SSIS ?
View 2 Replies
View Related
May 3, 2001
Can anyone tell me how I can copy store procedures from SQL Server 2000 to Source Safe 6.0? I right-click the store procedure and cop
y it but when I got to the visual source safe it will not work. I therefore went through the soruce code control on Tool menu which I cannot see such commands. I do really need your help.
Regards,
View 2 Replies
View Related
Jan 3, 2007
Hi - I am wondering if anyone can give me good advice on the following situation:
I'm a new employee at a place where the SQL Server/Visual Source Safe admin has left. Only his co-worker has a VSS account and the VSS admin never gave her the admin p/w and he cannot be contacted. We need to have an account set up for me.
My question is: How can this be done with the knowledge of the admin p/w? Would we have to backup the files, un-install VSS, re-install it and set up the admin account again, or have I answered my own question? Or are we screwed? I don't have enough experience with VSS to make a decision.
At this point we're considering calling "Geek Sqaud" or "Geeks on Call", etc.
Thanks for any suggestions?
View 4 Replies
View Related
Nov 15, 2007
I have about 40 stored procedures in a Visual Source Safe stored procedures which we are using for change control.
All stored procedures require to be moved into production across at least 13 different databases each on a dedicated server.
The only way I know at the minute is to do this manually. Does anyone out there have any ideas of how this task can be automated?
View 9 Replies
View Related
Sep 25, 2000
Hi,
Any pros and cons of putting sprocs into Source Safe?
Thanks,
Judith
View 2 Replies
View Related
Dec 28, 2006
Hi guys..
I had created a Integration services project within my local system.All my packages are running fine.I added it to source control.Now i added this project from source control to another machine.It is failing to run...The path it is trying to execute is the location of the where i actually created my project.
How can i make it work.let me know
View 8 Replies
View Related
May 15, 2008
The goal is to address visual source safe database on the network. We have the srcsafe.ini in the network as \ipaddrsrcsafe.ini. Now I create a new VSSDatabase object and call its OpenDb. Well for simple consle app or winform it is ok. But I was running it under Sql server Stored Procedure. It failed for I cannot access the source safe path throgh the COM object.
I know it is because of Windows identity. So I add the following code before I want to open the database, changing the to the WindowsIdentity:
WindowsIdentity impersonId = SqlContext.WindowsIdentity;
WindowsImpersonationContext orgCtx = null;
try
{
orgCtx = impersonId.Impersonate();
VSS_Database = new MVSI.VSSDatabase();
// VSS_Database.ImpersonateCaller = true;
VSS_Database.Open(Path, UserName, PassWord);
}
catch (Exception err)
{
orgCtx.Undo();
throw err;
}
finally
{
orgCtx.Undo();
}
Without the commented line "// VSS_Database.ImpersonateCaller = true", this does not work at all. It just behave like no changes to the windows identity.
However if I add this code, well, OpenDb will result in a No-response query. The Sql server is running the query with no responses.
Have you ever met that before? I am really frustrated. Thanks
View 3 Replies
View Related
Jun 4, 2007
I have created a integration services project on machine A and have added to visual source safe 6.0
When i try to take the project from source safe and store that on a different machine B i have a problem with it....
I check in everything on Machine A
When i try to add on machine B it tries to add it with "Name of package(1)" which means that its adding a copy.But it dosent do for all only for few
Could anyone let me know what the problem is??????
View 1 Replies
View Related
Jan 22, 2007
I am running Microsoft SQL Server 2005 Express Edition, and I am having difficulties setting up an ODBC User Data Source to connect to the SQL server.
I have tried going through "Control Panel -> Administrative Tools -> Data Sources (ODBC)" to add a user data source. For the SQL Server to connect to, I have tried specifying "localhostSQLEXPRESS", "SQLEXPRESS", "(local)", etc. -- but nothing seems to work. When the DSN configuration wizard tries to connect to the SQL Server to obtain default settings, it fails with the error "SQL Server does not exist or access denied". (Same error occurs if I try connecting to this ODBC data source later.)
But I know that the SQL Server exists and I have been using it through the SQL Server data provider in another application.
I am new to this, so any help or pointers would be greatly appreciated.
Thanks,
Kumar
View 2 Replies
View Related
Jul 20, 2006
Hello,
To implement the new SQL 2005, I plan to make the environment easy to manage. The environment should be simple to document and be automated via scripts. Therefore I plan to use mount points as described below.
On a typical SQL server with multiple drives like C, D, E, F, G, H. Where each drive will have various folders to hold SQL code, data files, transaction log files, tempdb files, snapshot files, and other types of files. This typical environment is not pretty and is hard to write scripts for.
So I plan to standardize on one standard directory structure via volume mount point. On all new SQL 2005 servers, we should see drive E as the one and only SQL Server directory. Other drives will be mounted to drive E as shown.
E:
SQLSERVER local folder -sql code for each db instance
SQLSHARED local folder -sql shared tools for all db instances
SQLTLOG1 Drive H -db transaction log
SQLSNAP1 Drive F -db snapshot files
SQLTEMPDB1 Drive H -tempdb main data file
SQLWORK Drive D - DBA work area
SQLDATA1 Drive G -db data files
SQLDATA2 Future Drive -if SQLDATA1 is too large for any direct attached drive, or to get more I/O throughput.
With this implementation, I can easily write scripts to manage the environment. Also if any mounted volume is out of space, we can swap the based drive without doing any change to database configuration. We can also switch from direct attached drive to SAN in the future.
Do you think mount point is safe to use with SQL 2005? I know it is supported.
Do you have a standard directory structure for your environment? How do you do it?
Thanks,
KTMD
View 2 Replies
View Related
Nov 8, 2007
Hi,
Is there a way to set the XSD programatically? I don't want to hard code an XSD filename/location.
Alternatively, is there a way to set the location in a relative path name (i.e. relative to the path of the package)? I did see a similar question here but that wasn't answered. I tried but I wasn't getting anywhere.
As far as I can see there is no way to set this with an Expression either.
Another alternative I thought of would be to set this with using the SSIS object model but I have no experience with this and I don't know if it can be done at run time. If it can be done I would appreciate a pointer to some further information on doing this.
Thanks,
Mark
View 4 Replies
View Related
Sep 6, 2007
Is there a command that can be used to set the account and password of an SSRS data source? I want to use a datasource that uses the option "(windows) credentials stored securely in the report server". The password for the account to be used can not be known by any humans (or we have to kill them after) so we want to set it programmatically. Is this possible via a command?
View 4 Replies
View Related
Apr 26, 2007
I'm trying to set up a user DSN for a MS Access database in Vista. In XP it's usually just a case of going to Admin Tools > Data Sources but I only get the option of SQL Server and SQL Native Client with Vista.
I'm pretty sure I found a way of doing it a while ago by opening another version of Data Sources from the command prompt but can't for the life of me remember what it was.
Anyone know how to do this?
View 2 Replies
View Related
Aug 15, 2006
Can anyone tell me why I am getting this error when I try to select * from a table through a newly created synonym? I have admin rights to both db, but they are on separate servers.
<Error>
OLE DB provider "SQLNCLI" for linked server "srvDEV" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
</error>
<code>
CREATE SYNONYM ARContractTerms_syn FOR srvDEV.EricsAdeptCastle.dbo.tblARContractTerms
SELECT * FROM ARContractTerms_syn
</code>
Am I running into schema problems?
Thanks all
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.2900.2180
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
View 2 Replies
View Related
Mar 7, 2007
Is there any setting to indicate Unicode data to handle, so that no need to exclusively use Unicode data types ( ex nvarchar ).
I need to execute both Unicode and non Unicode SQL statements with in one environment. I don't want to create seperate database again.
Please let me know if any one had approached on SQL server this way. I am looking the way Oracle provides where you don€™t need to declare the data type of the column as Unicode type in table definition but can indicate when running a query to manipulate that field as Unicode field.
Thank youSunil
View 1 Replies
View Related
Jun 14, 2007
Hi there
im trying to set up a replication from a local server to a remote server.
when starting up and selecting the Distribution / publisher, i get the following errors --->
Details as followed...
TITLE: New Publication Wizard
------------------------------
SQL Server is unable to connect to server 'SERVERX'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
and...
===================================
SQL Server is unable to connect to server 'SERVERX'. (New Publication Wizard)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
===================================
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.CheckServerAlias(ServerConnection conn)
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.Open()
at Microsoft.SqlServer.Management.UI.CreatePublicationWizard.PrepareToShow()
View 3 Replies
View Related
Jul 23, 2005
I'm running EM on my local box and sql server on a remote internetaccessed box.How do I specify a file path for a DTS package to access files on theremote box?For example, to run a local dts package the filepath isc:filepathfile.txt.How would I change the file path/name to allow the dts package toaccess files on the same remote machine?-Dave
View 1 Replies
View Related
Feb 1, 2006
Hello,
I've been working on an application that uploads an RDL to Reporting Services (through the SOAP webservice method CreateReport) programmatically. I'm having difficulty setting up the data source properties for my uploaded report. In particular the Data Source Credentials property.
The datasource for my report doesn't require credentials. By default after I upload the report to Reporting Services, the Data Source Credentials property is set to "Credentials supplied by the user running the report". How do I go about setting the Data Source Credentials property to "Credentials are not required" programmatically through the webservice?
Thanks in advance
View 6 Replies
View Related
Nov 29, 2005
Hi,I had the SQL Server Express installed on my desktop and it was working just fine. Now, I upgraded to .Net 2.0 and I had some problems with the SQL Server Express just like in post http://forums.asp.net/1070169/ShowPost.aspx.These problems were solved by using a cleanup tool but now when i try so setup the SQL Server Express 2005 i get the error:SQL Server Component Update will install the following components for SQL Server Setup:- (ok) Microsoft SQL Native Client- (error) Microsoft SQL Server 2005 Setup Support FilesErrors occurred during the installation:Error 1603 installing Microsoft SQL Server 2005 Setup Support Files.See log file for more detailed information.Fatal error during installation.The log file as lots of information such as:Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_WS10170_Support.log Last Action : InstallFinalize Error String : The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}. Error Number : 2908 -------------------------------------------------------------------------------- WS10170 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information. Can someone please help me on trying to avoid format the desktop.Thanks,Stromberg
View 2 Replies
View Related
Mar 21, 2007
I have recently upgraded my databases from SQL 2000 to 2005. In 2000, I could set the network affinity so that sql server was only accessible from one of the two network cards. I cannot find how to do this in sql 2005. Is there a way?
In my installation, I have two network cards in each server. The "A" network adapter connects to the "A" hub, and the "B" adapter connected to the "B" hub. Traffic on trhe "B" hub is my private, non-routable network, This is where I want the SQL Server traffic to run. The A hub traffic is the public network. This gives me the ability to isolate SQL Server from the outside world.
View 1 Replies
View Related
Jan 2, 2007
Im trying to setup replication between two 2005 standard editions. They are on the same LAN and installed equally + SP1. They are installed as named instances (with the same instance name MSSQL01). Remote access is allowed and TCP/IP and shared memory and I can connect between them.
SQL1MSSQL01 is configured as the publisher & distributor and the snapshot is done. When Im using the subscriber wizard from SQL1 to create the subscriptions and add SQL2MSSQL01 as a subscriber the connection fails to the remote server.
The error message is:
TITLE: Connect to Server
------------------------------
Cannot connect to SQL2MSSQL01.
------------------------------
ADDITIONAL INFORMATION:
Failed to connect to server SQL2MSSQL01. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
When I do a manual connection to SQL2 using the server managemnet studio on SQL1 I cannot connect using the instance name e.g. SQL2MSSQL01, it works only when only using the server name e.g. SQL2. Then I have full access both when using a windows or SQL user.
When trying with using the server name only when setting up the subscription, I got a error saying that I need to use the full name.
TITLE: Connect to Server
------------------------------
Cannot connect to TFMHQARNDE07.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, ' SQL2MSSQL01'. (Replication.Utilities)
I can also mention that theese servers are cloned from another server and I needed to drop the old servername and add the new servername (sp_addserver) on both servers to get the publisher to work.
When I try to setup the subscription from SQL2 and add SQL1 as a publisher I get the same error.
Any one have any idea what it can be?
View 1 Replies
View Related
Jul 16, 2007
Hi there,
I am looking for a way to have SQL server accept incomming e-mails and store the contents of the e-mail into the database. I was doing some research on the subject of recieving emails from a SMTP server with the server having an account, but it looks like there are no information on the subject.
Is this possible? Or do I have to use some sort of work around hack?
Thanks in Advance,
Liv
View 6 Replies
View Related
Jul 6, 2006
Hi
I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.
Has anybody done this before. If yes what will I need to check. Can you please let me know :-
1) SQL Server 2000 which SP should be installed to support this enviroment.
2) SQL Server 2005 which SP should be installed to support this environment.
3) Any thing that I need to look out for.
Thanks for any inputs on this.
Regards
View 3 Replies
View Related
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Feb 22, 2008
Hello all,
I am running into an issue that seems to be collaborated here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=188886&SiteID=1.
To summarize, I have a Foreach Loop that uses a Foreach File Enumerator. The loop writes the file names to a variable which is used in the Expressions property for a flat file's ConnectionString. The flat file is used as a source destination in a Bulk Insert Task that is inside the Foreach Loop. The flat file's connection string is not picking up the file name, resulting in this error: "The specified connection "test.txt" is either not valid, or points to an invalid object. To continue, specify a valid connection."
It doesn't work for a file connection manager or a flat file connection manager.
It does work if I replace the Bulk Insert Task with a Data Flow (flat file source -> ole db destination). It also works if I set the file's connection string manually in a script task.
It looks to me as though the Bulk Insert isn't calling whatever method in the connection manager that reevaluates the property expression. Am I missing something or is this a bug? I looked at the connect site, but couldn't find this particular scenario.
Thanks for any insight you might provide!
Jessica
View 3 Replies
View Related
May 2, 2006
Hi there!
My provider does not yet support SQL Server 2005, they are still on SQL Server 2000. I put together a very basic login page, but it is crashing everytime I access it because of this problem, and sadly I am not advanced enough as yet to know how to remedy it! Can you help?
Here is the error page, some of it; - Any ideas gratefully received!
Russ.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
View 1 Replies
View Related
May 15, 2006
How would Set permissions Sql Server 2005 so that I can access a asp page created in VWD and Sql Express.
On the production server i have just the one instance of Sql
I have the following connection string in the web config file:
<connectionStrings>
<add name="ConnectionString" connectionString="server=serversNameXPRESS;uid=aspuser;pwd=aspuserPassworkd;database=DATABName" />
</connectionStrings>
The account i setup to access the db in Sql 2005 Proper on the Production serve is Represented by the name in the above example as “aspuser�. I created this user in security, logins. And I gave permissions to this on the Db level “create procedure delete, select, update insert.�
I get a error when i run the page in the browser that says “login failed for aspuser.�
I know virtual directory is configured properly. I can run aspx page in the directory with out a db connection, without and error.
Any help would be greatly appreciated.
View 2 Replies
View Related
Oct 18, 2007
Hi!
I have a problem changing the language setting to swedish on sql server 2005 compact edition. The thing is that I'm using a language dependent format: '1998-02-28 14:23:05' (Numeric) when saving and I rather don't want to change this format, because it's a lot of work. (The default setting on the database seems to be us-english, which has the format month-day-year and there by gets wrong for me).
As I understand, this is detemined by the language settings on login. So I set this by using the 'locale identifier' (sv-SE) in the connection string to the CE database, but when I try to save the data, the datum is still interpreted as us-english format.
(The application I'm running have been upgraded from sql compacte edition 2.0 where this worked just fine, though without specifing any language settings in the connection string.)
Appreciate any help!
View 2 Replies
View Related
Oct 21, 2006
Hi,
I have setup a linked server to a DB2 database using "Microsoft OLE DB Provider for ODBC Drivers",
the connections works fine i am able to run select queries.
but the number of rows returned from the two following statements are different.
select * from linkedserver...tablename
select count(*) from linkedserver...tablename
e.g. The First statement returns 116 rows, whereas the second query returns count as 144....
I am a bit confused ?????
could anybody think of any possible reasons..
Cheers
ARAW012
View 4 Replies
View Related
Nov 13, 2007
Hi ,
We want to install 2 applications that run on SQL server 2005 but the requirement of database installation are different Collation setting ( One require Dictionary order, case-insensitive, for use with 1252 Character Set and other require Dictionary order, case-sensitive, for use with the 437 (US English) Character set).
So the question here could I install both two applications successfully on same platform ? and if yes how?
Thanks and regards,
Quinh
View 5 Replies
View Related
Feb 28, 2006
I am setting up a clustered sql 2005 to test replciation and I am having trouble setting the server as a distributor. I get the following message
* SQL Server could not configure xxxx as a Distributor.
Only replication jobs or job schedules can be added, modified, dropped or viewed through replication stored procedures.
Changed database context to 'master'. (Microsoft SQL Server, Error: 22538)
Any help is appreciated.
Thanks
View 3 Replies
View Related
