I have a simple CSV/XLS dump that i need to put up on the server. I would need to create a file output daily and need a variable name to identify them easily.
I have the problem of naming it in the "connection string" easily and i have tried variables and expressions too.
I am new to this so please need help.
Thanks
Hi,
I'm attempting to use a variable to define the file name in my flat file connection (for error files in my SSIS package).
I have it defined as follows:
@[User::ValidRootFolder]ConditionConditionSourceError.csv
However it throws an error 'the filename, directory name, or volume label syntax is incorrect'.
If I put the value of the variable in explicitly it works, so I know my variable name is correct - am I just not calling the variable properly?
Thanks
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
Hi,
How can I write the value of a variable to a flat file in SSIS?
In particular, I'm creating a flat file I'm storing the data of a table. I'd like to add a header that displays the value of a variable that contains the record count. How can I do that?
Thanks in advance,
Che
I have a number of DTS packages I am trying to convert and am totally new to Integration Services.
I have a flat file that I reference to get a date that I use in some SQL statements in the package. It seems like the best way to do this would be to create a variable to hold the date and set it at run time from the flat file. I've been searching the documentation and the forum and can't figure out how to do this. This is so basic that I feel like an idiot putting it on the forum but I need some help. This whole Integration Services thing is a big shift from DTS (which I eventually became pretty good at) Now I'm back to ground zero.
Any help would be appreciated. If you can direct me to any basic training resources that would be cool too.
I am trying to make a SSIS package that will loop trough all files in a directory and load information from them.
I can do this with Raw File Sources since they allow me to use a variable name as the file path, but I cant seem to do the same with Flat File Sources. Is there a way to change the connection to a Flat File Source on each iteration of a loop? Actually, if this is possible with all types of file sources (like excel files) I would love to know about it too.
I was thinking about renaming the file through a script task but that does not seem like the most elegant solution so decided to see if some one here knows of a more proper way before I go that direction.
Hi,
I'm relatively new to SSIS and I've been tinkering with the XML and Flat File sources.
I noticed that in the XML source it is possible to tell SSIS to read the XML data from a variable. I didn't see a similar option for the Flat File source.
Does anyone know if it is possible to read flat file data from a variable when using the Flat File source?
Thanks,
-dhideal
Hi,
Here is my problem :
I work on a SSIS package with SQL SERVER 2005
I need to extract data from a table and put these data in csv files
But... the flat files name should be dynamic and assigned by a variable ...
Here's an example of my table :
Column header :
Id, Name, Number
1 TOM 22
2 TOTO 44
3 SAM 44
4 RADIO 55
I expect to have 3 csv files :
USER_22.csv
USER_44.csv
USER_55.csv
for example : USER_44.csv contains :
2;TOTO;44
3;SAM;44
if there's 50 different number, i expect 50 files
can i do that in a dataflow ?
thanks for answering
I have a few flat files that will be retrieved from some SFTP server. One of the flat file will act as a terminal file where it will specify the total number of records expected in each other the flat file.
Data in the terminal.txt
FileName TotalRecords
File1 1000
File2 1500
File3 2000
So, before transforming the data from the flat file sources into the target destination, i wish to do a row count checking for each of the flat file source to make sure that the number of records in the flat file source is tally with the number of records specify in the terminal.txt file. I'm able to get the number of records in each of the flat file by using the RowCount component but don't know how to get the data out from the terminal.txt file in order to make a rowcount comparison.
Can any1 help me on this? Or is there any other way we can do to make sure that the flat file source is alright before proceeding with the data transformation task?
Thanks!
Hey all!
Okay, can I assign line x of a flat file to a variable, parse that line, do my data transformations, and then move on to line x+1?
Any thoughts?
In other words, I'm looking at using a for loop to cycle through a flat file. I have the for loop set up, and the counter's iterating correctly. How do I point at a particular line in a flat file?
Thanks for any suggestions!
Jim Work
Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
I have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
I'm doing a simple ETL that reads a database table and dumps the content to a text file. The text file will be named Employee.txt. This file name will remain the same across my environments, but I may want to vary the directory location to where I want this file dumped.
So, I defined an environment variable called "DataTargetDir" in all my environments. Now, I want to utilize this variable in the "File name:" box within the Flat File Connection Manager Editor. How do I do this? I'm thinking I can write something like "%DataTargetDir%Employee.txt" in the "File name:" box, but it's not working.
Am I approaching this the right way?
I have a requirement wherein I have to setup the flat file connection manager to accept columns on fly. Meaning I want to retrieve list of columns/column count from the database when the package is run and set the connection manager with those many columns.
View 6 Replies View RelatedHi,
I am migrating one of my DTS package to SSIS.
My task is to read the filename from a database table and transfer the flat file data in to a table.
In SSIS,I am able to fetch the file name using a Data Reader Source; but how to pass this fileName parameter to Flat File Source ?
In DTS I have used ActiveX script to pass filename variable as flatfilecon.Source.
Any help ?
Thanks,
Ravi
Public Class ScriptMain
Inherits UserComponent
Dim smpid As String
Dim Prdt As String
Dim rcnt As Int64
[code]...
Using the Vb script above I am expecting to read the first row from a flat file source and transferring the data into two variable using script component.
SQL server 2008.
Script task Custom Properties:
Script Task Input Columns:
I get the following errors one after the other:"The collection of variables locked for read and write access is not available outside of PostExecute." "Object reference not set to an instance of an object."
I am writing a package that will process delimited flat files that will come in one of a few different versions. Within each flat file, the number of delimited columns will be the same, but each version of the file has a different number of columns. I have tried configuring the flat file data source to expect the version with the largest number of columns, but it will then throw away rows that have less than this number of columns (warning: There is a partial row at the end of the file).
Is it possible to use a single flat file data source that will work with all of the different width files?
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet
Record Length 400
Positions Length FieldName
Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
I am creating one SSIS package where my source is oracle. I have transferred the data from Oracle to flat file as per client requirement.I have to create single package for 2 country 1 is US and another is CANADA Columns are below
ZONE_ID,
ZONE_NAME
Zone Id having data like 10001,10002,10003,20001,2002,2003
Where zone_id start with 1000 is US Zone and Zone_Id start with 2000 is Canada Zone.
For US:
1. Load geography data from DB tables into flat files
2. Load geography data from flat files to Spectrum DB tables
For Canada:
1. Load geography data from DB tables into flat files
2. Load geography data from flat files to Spectrum DB tables
Now I want to look from flat file if Zone_id start with 1000 then it must go to US_DFT and if Zone_id start with 2000 then it must go to CANADA_DFT.
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedNeed to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Thanks in advance for any help.
Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies View RelatedHow do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
Hi,
I have a flat file, comma-delimited, with strings in double-quotes.
In the connection manager for the file, I have specified that the Text Qualifier = ""
However, in the preview tab, it still shows the strings as surrounded by the quotes, e.g. "mycol1" whereas it should show mycol1 without the quotes.
Next, when I examine the data in the database after the load, it's messed up there also.
"mycol1" ends up in the database as "mycol1
"mycol2" ends up as "mycol2
This is not right.
I have format set to delimited, header row delimiter crlf, etc.
Any ideas?
Thanks
Hi,
I have a package A which is copied from another existing package B as most of the data structure and ETL mappings are same.
What I need to change in Package A is to change the file in Flat File Connection Manager. I can change it in the conneciton manager editor. However, it is automatically changed back to the previous one everytime when I try to Save All or run the package.
I also tried to copy/paste this Flat File Connection Manager in the same package but samething happen. The package file is not set 'Read Only" so anything else can Saved well except for the File name in connection manager.
Is this a bug? It would be very appreciated if anyone can give me any idea about this.
Thanks,
Jenny