Setup And Upgrade :: Cannot Connect To WMI Provider

Jul 23, 2015

I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog

ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003

Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.

View 2 Replies


ADVERTISEMENT

Setup And Upgrade :: LocalDB - Create And Connect To Database Programmatically

Jul 10, 2012

I need to be able to create & connect to temporary databases programmatically, and NOT using the command-line, within a C# program. How would one go about doing this?

View 7 Replies View Related

Setup And Upgrade :: Activity Monitor Shuts Down If Connect To Instance Its Monitoring With Performance Monitor

Aug 19, 2015

If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:

1.  I get all the panes and charts except % Processor Time.

2.  Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.

Additional information:  Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”

3.  Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work.  I dropped the mapped drive and rebooted the machine.  That brought back 95% of the information in the Activity monitor.

4.  Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.

View 4 Replies View Related

Setup And Upgrade :: 2008 R2 Setup UI Has Incomplete List Of Installed Features - Can't Uninstall RS

Jul 23, 2015

We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page.  In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.

View 3 Replies View Related

Setup And Upgrade :: Error Setup Account Privileges

Nov 15, 2015

I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop.  When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7.  How do I get around this without having to resort to a computer running Windows Server?

I have Visual Studio 2013 premium installed along with Localdb v11.  I just want to connect and manage my database engine through SSMS when developing any application.

View 2 Replies View Related

Setup And Upgrade :: One Machine 6 IPs - How To Setup DNS For Server

Apr 24, 2015

I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:

MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2

If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.

View 3 Replies View Related

Setup And Upgrade :: WHY Master On C Drive

Oct 27, 2015

WHY master, msdb, model always seem to be on the " C " drive ....

View 4 Replies View Related

Setup And Upgrade :: Splitting MDF And NDF File?

Jul 20, 2015

My SQL Server has one MDF file and  3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.

I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.

View 3 Replies View Related

Setup And Upgrade :: Way To Get To SSIS Or SSAS

Apr 23, 2015

So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.

View 4 Replies View Related

Setup And Upgrade :: Allow Only Connection From Same Computer

Jul 17, 2015

I am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server. 

What should i do when i only want that application to use the database?

And so that you can only connect to the database from the same computer as the SQL server?

View 6 Replies View Related

Cant Connect To Membership Provider Db

Sep 10, 2007

 I've started developing an ASP.net 2.0 app with VWD Express.The default membership provider db of SQL Server 5005 Express is not installed on my host servers. So my workaround has been to use a Full blown SQL Server 2005 DB as a custom membership provider declared in web.config. This works fine on the production server. However, when i try to login from my development app I get Exception # 40 can't connect to SQL server membership provider.. Moreover, my app configuration confirms there is problems connecting to this server in my development environment. How can I solve this and bring my development app up & running again? many thanks 

View 1 Replies View Related

Setup And Upgrade :: Several Same Environment Variables In Path

May 5, 2015

I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables

C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;

[Code] ....

Can I delete all variables related to older versions safely without any issue.

View 13 Replies View Related

Setup And Upgrade :: Cluster Installation Failed

Oct 8, 2010

when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..

View 12 Replies View Related

Setup And Upgrade :: Missing System Administrator

Jun 3, 2015

I am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.

View 8 Replies View Related

Setup And Upgrade :: Add A Failover Cluster Node

Jan 3, 2010

I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:

Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.

View 30 Replies View Related

Setup And Upgrade :: What Are DB Mirroring Trace Flags And How To Use

Sep 11, 2015

What are the DB mirroring trace flags and how to use ?

View 4 Replies View Related

Setup And Upgrade :: Run Multiple Instances On 2014?

Jun 5, 2015

I've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?

View 6 Replies View Related

Setup And Upgrade :: SSMS Restarts Itself After Close It?

Mar 14, 2013

If I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?

View 12 Replies View Related

Setup And Upgrade :: TempDB - Configurations Adjustments?

Sep 10, 2015

After installing SQl Server 2012, I need to perform some adjustments for its configurations.

On the TempDB, I want to:

1) Turn on Trace Flag 1117. How to do this?

2) Having only one transaction log file.  How can I make sure of this?

3) Creating multiple files. How to do this?

View 3 Replies View Related

Setup And Upgrade :: Database Backup Restore

Sep 19, 2015

I want to restore my SQL Server 2000 database backup to SQL Server 2014.

View 4 Replies View Related

Setup And Upgrade :: Moving Log File To Different Disk

Sep 16, 2015

Do you have to move the entire content of the log folder to the new location?

View 4 Replies View Related

Setup And Upgrade :: Index Was Outside Bounds Of The Array

Sep 17, 2015

I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.

Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML
3.0 6.0 
Microsoft Internet Explorer
9.11.9600.17041
Microsoft .NET Framework
2.0.50727.5485
Operating System
6.1.7601

View 2 Replies View Related

Setup And Upgrade :: Number Of TempDB Files

Aug 24, 2015

My server has two 8 core processor. Should I use 8 or 16 data files for Tempdb?

View 4 Replies View Related

Setup And Upgrade :: Right Clicking Any Table Gives Error 300

Jun 26, 2015

We setup a new Shared SQL server 2014 Web and transferred all SQL databases over. However when customers connect via SQL Management Studio they now get VIEW STATE error when right clicking on any table on any database. 

Check screenshot.

View 4 Replies View Related

Cannot Connect Using ADO With Excel Microsoft Jet Provider 4.0

Feb 15, 2007

Hi:

I have a vb 6 app that exports data from sql to excel. The user has the ability to select either local or server. When they select server, the connection string is modified to include the server name instead of the local msde instance to look like this:

"provider=sqloledb;data source=MyServer;initial catalog=MyDatabase;user id=UserX;password=PasswordX;database=MyDatabase"

I'm using Microsoft Jet Provider 4.0 and OpenDataSource.

SELECT * INTO TempXL FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C: estxltest.xls;Extended Properties=Excel 8.0')...[Sheet1$]

This code works fine when user is accessing msde on local, but when using above DSN, I receive the following message:

"2147217900 - OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEdB.4.0' IDBInitialize:: Initialize returned 0x800040005: The provider did not give any information about the error.]

When I trace the connection, these error messages occur:

Failed to set proper user name ('NT AUTHORITYSYSTEM') for the connection

[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot alter table 'TblXMyTable' because this table does not exist in database 'master'. (State 42S02) (Code 4902)

[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'TblxMytable'. (State 42S02) (Code 208)

[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error. (State 42000) (Code 7399)

[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.]. (State 01000) (Code 7300)

I am especially puzzled by the second message because I am specifying the database name in my connection string as:

"provider=sqloledb;data source=MyServer;initial catalog=MyDatabase;user id=UserX;password=PasswordX;database=MyDatabase"

I can read from the server copy and copy to Excel, but I cannot write back to SQL. Can someone please tell me what I'm doing wrong?

Thanks in advance for any help.,

















View 1 Replies View Related

Setup And Upgrade :: Changing TCP Port Of A Default Instance

Jul 31, 2014

I installed a default SQL Server 2012 instance on Windows Server 2012.I enabled the SQL Browser and changed the TCP port of the instance to 1435. I changed port 1433 to 1435 I was able to connect to the instance using SSMS on another server. Now I have to enter Servername,1435 to make a connection.Why does the SQL Browser not resolve the servername to the right IP address and port 1435? Why am I not able to make a connection when I enter the servername or <servername>MSSQLSERVER? Is a SQL Browser only resolving named instances?This works fine for a named instance. Is there something special about default instances or the SQL Browser?

View 15 Replies View Related

Setup And Upgrade :: SERVER 2012 Connecting Error

Nov 19, 2015

when i open my computer and want to use SQL SERVER and when iam connecting it this error will occur  "A network related or instance specific Error in SQL SERVER 2012" Then aim going to Services and Find SQLSERVER and start the services and it will connect..My Question is that why every time iam going to Start the services..I want to connect Automatically when i click on connect button in sql server its very rediculous to go evrytime in Services. i update my window 8.1 to windows 10 before it will connect automatically no need to go in services to start the SQLSERVER. 

View 5 Replies View Related

Setup And Upgrade :: Page Life Expectancy Less Than 300 Seconds

Jun 9, 2015

Every day, at same hour, my SQL Server is showing error of PLE less than 300 seconds.

So after this, the server works properly.

View 5 Replies View Related

Setup And Upgrade :: 1433 Not Listening On 2012 Cluster?

Jul 27, 2015

i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433

View 14 Replies View Related

Setup And Upgrade :: Unable To Make Remote Connections

Apr 26, 2015

For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. i need to get SQL server up and running.

View 2 Replies View Related

Setup And Upgrade :: Attempted To Perform Unauthorized Operation

Sep 29, 2009

I'm trying to install SQL Server 2008 on a virtual machine with Windows 2008 R2. Setup fails with the error "Attempted to perform an unauthorized operation". Looking at the installation log, I see these details:

2009-09-29 08:24:49 SQLBrowser: sRegLocation = 'SOFTWAREMicrosoftMicrosoft SQL Server', regView = 'Wow6432', sSddl = '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$ITISFIM])', bOptional = 'False'.
2009-09-29 08:24:49 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine

[code]....

View 35 Replies View Related

SSE 2005 W/ Advanced Services SP1 Upgrade Setup Failing

Oct 3, 2006

I'm trying to upgrade an existing installation of SSE 2005 to SSE 2005 with Advanced Services SP1 so I can take advantage of Reporting Services. I'm installing on a box that has XP Pro SP2 installed. As prompted by the SSE setup, I had to install IIS. After installing IIS, the setup went along okay until it came time to configure the report server. I chose the default (configure with the default configuration) and I get the following error message:

TITLE: Microsoft SQL Server Setup
------------------------------

SQL Server Setup failed to obtain system account information for the ASPNET account. To proceed, reinstall the .NET Framework, and then run SQL Server Setup again.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28126

------------------------------
BUTTONS:

OK
------------------------------


Anybody know what is causing the error and how to fix it? I tried the above link and it didn't provide any helpful information. Do I really need to reinstall the .Net Framework (I'm hoping not)? Any help would be greatly appreciated.

Thanks,

Tony

View 3 Replies View Related

Setup And Upgrade :: Won't Be Able To Revert Back To Original Settings

Jan 7, 2010

What's the diffrence between the Built-In account 'SERVICES' and the 'NT SERVICEALL SERVICES' ?I want to dploy a group poicy for 'user right assignment' - 'log on a service' to a server, which curretnly has among other things the 'NT SERVICEALL SERVICES' however i can't replicate this account for my GPO, (even locally on the server),I deploy the GPO and overwrite the server settings for 'user right assignment' - 'log on a service' and won't be able to revert back to the original settings..

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved