Setup And Upgrade :: Cluster Resource Cannot Bring Online
Nov 12, 2015I am trying to install fail over cluster for SQL and getting the below error message  :
I am using domain admin account to do the installationÂ
ADVERTISEMENT
Setup And Upgrade :: Not Clustered Or Cluster Service Is Up And Online - Failed
Feb 27, 2013I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning
Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.
Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.
Recovery :: Server Cluster Resource Fails To Come Online And Pending Online State
Nov 3, 2015We have SQL cluster installed on top of windows cluster on VM environment. Node1 and Node2 under Windows Failover Cluster. SQL instance is currently on node2 the instance is up and running, but SQL Cluster service remains online pending and it restarts the instance on every 5 minutes.
SQL Browser service are running successfully.TCP/IP ports are enabled and configured.If we start the SQL server agent it is on for seconds and stopped immediately  .Cluster Service is attempt to connect to the SQL service every few minutes (setting in SQL cluster resource) for the IsAlive check, if this fails then the SQL resource is restarted even if the instance was online. Hope this is what happening exactly.
[sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server Native Client 11.0]SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 ERRÂ Â [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [HYT00] [Microsoft][SQL Server Native Client 11.0]Login timeout expired (0)
00001024.00053314::2015/10/30-19:57:50.772 ERRÂ Â [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server
Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books
Online. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 INFOÂ [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] Could not connect to SQL Server (rc -1
Recovery :: Cluster Failover - Failed To Bring Secondary Node Online?
Oct 19, 2010Server : Windows server 2008
DB Server : SQL Server 2008 (SP1)
Â
Here are the series of events which happened.
1.) Event ID: 1135
Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049
Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Â Please ensure all IP addresses are unique.
3.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Â Please ensure all IP addresses are unique.
5.) Event ID: 1069
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066
Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066
Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk
output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.)Â Event ID: 1049
 (Same message as point 2)
9.)Â Event ID: 1069
    (Same message as point 3)
10.) Event ID : 1049
(same message as point 4)
11.) Event ID :1069Â
(same message as point 5)
12.) Event ID :1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069
Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049
(same message as point 2)
15.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205
 The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
Â
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try  to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
Setup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster
Oct 10, 2015During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
Setup And Upgrade :: Can Build Cluster By Adding Cluster Service
Jul 6, 2015Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedSetup And Upgrade :: Cluster Installation Failed
Oct 8, 2010when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies View RelatedSetup And Upgrade :: Add A Failover Cluster Node
Jan 3, 2010I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
Setup And Upgrade :: 1433 Not Listening On 2012 Cluster?
Jul 27, 2015i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433
View 14 Replies View RelatedSetup And Upgrade :: Add New Node To Server 2008 X64 Cluster
Nov 23, 2015I ran into problem while trying to install SQL Server 2008 to join to another node in a failover cluster ,you will find here the configuration doc and installation details. URL...
View 4 Replies View RelatedSetup And Upgrade :: Error During Remove Node From Server Failover Cluster
Jun 24, 2015I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies View RelatedBring Db Online/offline
Jul 23, 2005Hello there,I have a user who can bring offline a database but he cannot bring thedatabase back online.The error which pops up is:Error5011: User does not have permission to alter database dbnameALTER DATABASE statement failed.sp_dboption command failed.Any ideas?Thanks
View 1 Replies View RelatedBring Database Online
Jul 10, 2007Hi,
One of our database size 90 Gb was backed up and restored on a standyby server with NoRecovery option .A Stored Procedure was written to do production Database transaction log Backup every 15 min and restore the Tlog File on Standby server.
Once the last transaction log file is restored on standby server the tlog file is deleted.
Now due to some reason the restore tlog job failed but the tlog file got deleted.
Now till we will not restore the last database backup we will not be able to start the restore tlog job.
Now the database is in restoring mode.Is there any methord to get that database online without any transactionlog.
Regards
Sufian
Setup And Upgrade :: Cluster Group (Available Storage) Reserved By Windows Failover Clustering
Jul 28, 2015I am setting up my first sql node on a 2 node cluster and runing into this
The disks are already added into the failover cluster manager
SQL Server T-SQL - Bring Database Online...?
Oct 11, 2006Hi there, i would please like to know how to get a database online in T-SQL, I managed to get it offline in T-SQL, but know I can't get the database back online.
Please help.
If someone can please help me with the T-SQL command.
Or direct me to a link where I can get more information.
Thanks
MSDE Database Is Offline, How Do I Bring It Back Online?
Nov 29, 2007
Dear All,
One of my users created a MSDE database and did not realise that the limit is 2GB. I can not access the database. Is there anyway I can recover it?
They do not have a backup.
Could I create a new database in Standard Edition and then attach the Data and log files from the MSDE database?
Would that work?
No Witness, Primary Shutsdown, Bring Failover Online
May 6, 2006First of all, Great webcast today. My question is, I have everything up and running and would like to know what to do when the machine my primary is on quits or has a some type of disaster. Do I need to manually run recovery on each db that was mirrored? I'm not currently running a witness.
thanks
DTC Resource Fails On Cluster - Bug That Should Be Fix In SP2 (KB 899426)
Dec 29, 2007I am expirincing an issue that should have been corrected in SP2. When following the steps to enable DTC on my Windows 2003 SP2 Cluster, I get the following error in the event log:
Event Type: Error
Event Source: MSDTC
Event Category: Cluster
Event ID: 4394
Date: 12/28/2007
Time: 11:30:03 PM
User: N/A
Computer: NODE1
Description:
MS DTC's log information has not been configured correctly in the shared cluster registry. Error Specifics: d:tcomcomplusdtcsharedmtxclumtxclusetuphelper.cpp:557, Pid: 3652, CmdLine: C:WINDOWSsystem32msdtc.exe
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 05 40 00 80 .@.€
I have tried re-applying SP2 but it does not fix the issue. Does anyone have any idea how to fix this?
Below is the environment:
NODE1: Windows 2003 Enterprise Edition, SP2, 512MB RAM
NODE2: Windows 2003 Enterprise Edition, SP2, 512MB RAM
Both servers are hosted on Virtual Server 2005 R2
Share resources in the cluster are:
Quorum Disk is "Q:"
MSDTC Disk is "T:"
SQL Dist is "S:"
Setup And Upgrade :: 2008 R2 Setup UI Has Incomplete List Of Installed Features - Can't Uninstall RS
Jul 23, 2015We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedSetup And Upgrade :: Error Setup Account Privileges
Nov 15, 2015I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
Setup And Upgrade :: One Machine 6 IPs - How To Setup DNS For Server
Apr 24, 2015I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
SQL 2012 :: Can't Find Online To Setup AlwaysOn From Scratch
Apr 29, 2015I am trying to setup alwayson on 2008r2 server on 2 instances in the same machine fort testing purpose. I installed 'Failover Cluster Manager' now I don't see 'Nodes' to add up.Should I run 'Validate a configuration Wizard'? or something else.. Can't find online to setup 'Alwayson' from the scratch...Will I able to setup 'Always on' on same server but different instances like mirroring? or has to be different servers?
View 5 Replies View RelatedSQL 6.5 Cluster Upgrade To SQL Server 7.0 Cluster
Jul 17, 2000I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
How To Upgrade SQL Server 2000 Cluster To SQL Server 2005 Cluster(Database)
May 8, 2007Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
Installing MSDTC Resource After Installing SQL Server 2000 Cluster
Oct 19, 2006Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
Cluster Setup
Dec 5, 2006
We are on SQL Server 2000 A/A cluster and are moving to SQL Server 2005 cluster.
Following are the list of things before proceeding, please let me know if it needs any corrections and add-ons:
(side-by-side) Planning for new installation of SQL Server 2005 ( SQL2005INST1 and SQL2005INST2) on node1 and node2 and restoring the databases on SQL2005INST1 and SQL2005INST2 from respective 2000 instances.
1) SQL2005INST1
SQL Network Name
SQL IP address
2) SQL2005INST2
SQL Network Name
SQL IP address
As 2000 is already existing on the cluster.Want some clarity on following questions.
Can I keep the data files on the same disk as 2000 was using ?
Do I need to have new disk for the Quoram drive?
Under "Virtual Server Configuration" wizard during the setup under "Network to use"--- for "private cluster network" and "public cluster network" do that IP Address and network address and network subnet will be different from what we gave for SQL 2000.
Thanks
ITTECH
Cluster Upgrade SP2 2005
May 11, 2007Have recently performed an in-place upgrade of a 2 instance sql cluster from 2000 to 2005. The upgrade process went relatively smoothly. However, I am running into problems installed sp2. The first problem that I run into is that I have resrcmon.exe locked. I can click next, which is fine, but once I get past that point I get stuck during the installation process. I am updating DatabaseServices and Integration Services. It gets stuck on 'Awaiting first complete passive cluster node SQL-Test'. Does anyone have any ideas?
Thanks,
Tim
Upgrade 2node Cluster
Oct 4, 2006Hi There
I have upgraded many standalone sql server instances however never a cluster.
I have an active active 2 node cluster. Each running an instance of Sql Serevr , 1 default and the other a named instance.
All i can find in BOL is "How to: Upgrade to a SQL Server 2005 Failover Cluster (Setup) ", however this does not tell you how to upgrade and existing cluster.
Is there anything different ?
Will the upgrade detect the cluster and upgrade binary files on both nodes automatically etc? In other words is there anything different i have to be aware of when upgrading sql server instances cluster?
Thanx
Multiple Instances Cluster Setup
Mar 21, 2002Hi,
I have 2 W2K box's and want to install 4 SQL servers on each box & each different character set and want to setup clustering (Active - passive).
Do any one of you setup this type environment ?, Pl. let me know if you have any suggestions ..
Regards,
Madhu
Sql 2005 Cluster Setup Fails
Jun 2, 2006am trying to install sql 2005 with cluster option in win 2003 R2
servers
and keep getting sql database setup failed error.Summary log show that
it failed with error number 67.
It doesn't even create a SQLSetup0004_M2MTPONE_SQL.log file. core log
shows
Complete: DetectLocalBootstrapAction at: 2006/5/1 18:15:31, returned
true
Running: LaunchLocalBootstrapAction at: 2006/5/1 18:15:31
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 67
Aborting queue processing as nested installer has completed
Message pump returning: 67
We have two machines in running enterprises version of R2 in a cluster.
I tried running the setup from both machines and got the same error.
I am trying to find a solution for more than week but no luck. Any
help is appreciated.
thanks - Kailash
Part of Summary log:
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0004_M2MTPONE_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : NEWTPNT1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : \M2MTPONEC$Program FilesMicrosoft SQL
Server90Setup BootstrapLOGFilesSQLSetup0004_NEWTPNT1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0004_M2MTPONE_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Error Number : 67
--------------------------------------------------------------------------------
Machine : NEWTPNT1
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Error Number : 67
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log
file in %ProgramFiles%Microsoft SQL Server90Setup
BootstrapLOGSummary.txt.
Time : Thu Jun 01 18:18:54 2006
SQl 2005 Setup Failure For Cluster
Oct 19, 2006Installing SQl2005 into on Win2003 2 node cluster, at the very end of the
setup receive a message 'Remote Setup failed'. Referred to some sql logs
and found this;
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603
I've seen some similar errors on the web and suggestions about the Task
Scheduler being started on both nodes, but I ensured these were both started
before the install. SQL2005 does seem to be ok on the node1 where the
install was made, but fails when trying to failover to node 2.
Any help would be much appreciated here.
Thanks
Darren
SQL 200 Setup Will Not Run On Windows2003 IA64 Cluster
Jan 24, 2008Ok Here is the story with hopefully all the details.
I had a single node cluster Itanium server running W2k3 IA 64 Ent. SP2 with 2 x sql2000 ent sp4 and 1 sql2005 sp1 instances installed and a clustered file share.
All is well with them.
I attempted to add an additional node to my cluster which started out fine but when I tried to run the sql2000 setup to add this node, there are no warning or errors. Its a silent failure.
I tried many different scenarios but the results are the same. I evicted the node and then tried to run the setup on the evicted node. The setup ran without error. I tried to run setup on my single node cluster and it fails in the same manner. I read and read and from the sqlstp.log this is what I find. Does anyone have a clue what is wrong? i have check all my permissions but I can't put my finger on what it could be.Help Help.
1
<Func Name='InitDataFolder'
<EndFunc Name='InitDataFolder' Return='0' GetLastError='18'>
<Func Name='DetectComputers'>
1
<Func Name='DetectVersionOnMachine'>
NYCTDB04 D:SQL Server ENT 2000 - 64 BitSetupIA64inn 1
<Func Name='InsertVersionRecord'>
NYCTDB04 MSSQLSERVER 0 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2099209 1 NYCTDB41 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 BIZTALK 1 9.00.2047.00 1033 0 -1 -1 (64-bit) 133124 0 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 MYOFFICE 2 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2230280 1 NYCTDB42 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 SHARED_TEMP 3 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2230276 0 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectVersionOnMachine' Return='0' GetLastError='183'>
<Func Name='InsertComputerNameRecord'>
NYCTDB04 0 50010 539101189
<EndFunc Name='InsertComputerNameRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectComputers' Return='0' GetLastError='0'>
<Func Name='DetectIpResources'>
<Func Name='InsertIpResourceRecord'>
_sql$IpResources 0 144.210.119.64 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectIpResources' Return='0' GetLastError='183'>
<Func Name='DetectGroupResources'>
<Func Name='EnumerateGroupResources'>
SQL 2000 Shared Group(NYCTDB41) NYCTDB04 Disk Q: 0
<Func Name='GetDiskResourceLetters'>
SQL 2000 Shared Group(NYCTDB41) Disk V 0
<Func Name='InsertDiskResourceRecord'>
Disk V 0 V SQL 2000 Shared Group(NYCTDB41)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetDiskResourceLetters'>
SQL 2000 Shared Group(NYCTDB41) Disk W 1
<Func Name='InsertDiskResourceRecord'>
Disk W 1 W SQL 2000 Shared Group(NYCTDB41)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetVSInfo'>
SQL 2000 Shared Group(NYCTDB41) NYCTDB04 0
<Func Name='EnumVSIPResources'>
NYCTDB41
<Func Name='InsertIpResourceRecord'>
NYCTDB41 0 144.210.119.88 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSIPResources' Return='0' GetLastError='183'>
<Func Name='EnumVSResourceOwners'>
NYCTDB41
<Func Name='InsertVSNodeInfoRecord'>
NYCTDB41 NYCTDB04
<EndFunc Name='InsertVSNodeInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSResourceOwners' Return='0' GetLastError='183'>
<Func Name='InsertVSInfoRecord'>
SQL 2000 Shared Group(NYCTDB41) 0 NYCTDB41 MSSQLSERVER 1 D:Program FilesMicrosoft SQL Server V:Program FilesMicrosoft SQL Server ipgnasharedsql.service ipgnasharedsql.service
<EndFunc Name='InsertVSInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetVSInfo' Return='0' GetLastError='183'>
<Func Name='InsertGroupResourceRecord'>
SQL 2000 Shared Group(NYCTDB41) 0 0 NYCTDB04
<EndFunc Name='InsertGroupResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumerateGroupResources' Return='0' GetLastError='183'>
<Func Name='EnumerateGroupResources'>
Cluster Group NYCTDB04 Disk Q: 1
<Func Name='GetDiskResourceLetters'>
Cluster Group Disk Q: 0
<Func Name='InsertDiskResourceRecord'>
Disk Q: 0 Q Cluster Group
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='InsertGroupResourceRecord'>
Cluster Group 1 1 NYCTDB04
<EndFunc Name='InsertGroupResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumerateGroupResources' Return='0' GetLastError='183'>
<Func Name='EnumerateGroupResources'>
SQL 2005 Biztalk Group(NYCTDB40) NYCTDB04 Disk Q: 2
<Func Name='GetDiskResourceLetters'>
SQL 2005 Biztalk Group(NYCTDB40) Disk T 0
<Func Name='InsertDiskResourceRecord'>
Disk T 0 T SQL 2005 Biztalk Group(NYCTDB40)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetDiskResourceLetters'>
SQL 2005 Biztalk Group(NYCTDB40) Disk U 1
<Func Name='InsertDiskResourceRecord'>
Disk U 1 U SQL 2005 Biztalk Group(NYCTDB40)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetVSInfo'>
SQL 2005 Biztalk Group(NYCTDB40) NYCTDB04 2
<Func Name='EnumVSIPResources'>
NYCTDB40
<Func Name='InsertIpResourceRecord'>
NYCTDB40 0 144.210.119.90 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSIPResources' Return='0' GetLastError='183'>
<Func Name='EnumVSResourceOwners'>
NYCTDB40
<Func Name='InsertVSNodeInfoRecord'>
NYCTDB40 NYCTDB04
<EndFunc Name='InsertVSNodeInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSResourceOwners' Return='0' GetLastError='183'>
<EndFunc Name='GetVSInfo' Return='1168' GetLastError='203'>
<EndFunc Name='EnumerateGroupResources' Return='1168' GetLastError='183'>
<EndFunc Name='DetectGroupResources' Return='1168' GetLastError='183'>
<EndFunc Name='PerformDetections' Return='1168' GetLastError='0'>
Hoe To Setup Integration Services On A Cluster
Aug 24, 2006Does anyone know how to install SQL 2005 integration services on a cluster machine?
I have an a-a cluster machine. Both nodes are using SQL 2005 naming instance. During the SQL installation, I did include integration services option as one of my setup items. The setup process was running fine but I can€™t connect to integration services via MS SQL Server management studio. I see below errors:
€œInvalid server name "TESTServerB123". SSIS service does not support multi-instance, use just server name instead of "server nameinstance".
Looks like I must use default instance for 2005 integration services. I re-ran the setup program and added a default instance on the same cluster node. (On that node I have one default instance and one naming instance). Now I can connect to the default SQL Server but when I click on €œstored packages€?, I don€™t see file system and MSDB. It shows nothing at all. Any idea how to make integration services running on a cluster machine?
Thanks