Setup And Upgrade :: Error Setup Account Privileges
Nov 15, 2015
I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
View 2 Replies
ADVERTISEMENT
Aug 26, 2015
Our software vendor rep is trying to upgrade MS SQL server 2008 SP4 to 2012 SP1. Get an error message: no mapping between account names and security ADs was done. He says that we get this error message because we have two domain controllers in our network, and one is running on the same windows server that run sql server. Out IT support disagrees to delete the second domain controller, saying it is recommended by Microsoft and he suggests that the problem is in Active directory.
View 2 Replies
View Related
Jul 23, 2012
I am working with a client who is rolling out 50+ VM's based of a template we created. This is SQL 2012 CU1 running on Windows Server 2008 R2. Using the default service account the installer has it registers fine and we get the following in the SQL log.
The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service.
When we change to a domain service account through SQL configuration manager we see the following and cannot connect remote using integrated authentication The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service. Windows return code: 0x2098, state: 15. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
My understanding is you should and could change service accounts using the SQL Server Configuration Manager and it would set all permissions. Is there something we need to do in addition to get this up and working?
Convert DTS to SSIS |
Document SSIS |
30+ SSIS Tasks |
Real-time SSIS Monitoring |
Quick Starts |
BI Blitz
View 9 Replies
View Related
Jul 23, 2015
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies
View Related
Apr 24, 2015
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
View 3 Replies
View Related
Jan 31, 2008
Help, Had configuration error trying to set up reporting services. Uninstalled SQL Server and Reinstalled, but not all files were removed. How many files and directories do I have to remove to get Reporting Services to work?
Thanks!
Terry<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>Central Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_01_31_2008_16_16_12.log</Path>
<SystemName>JPADESKTOP1</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!configmanager!4!1/31/2008-16:16:12:: w WARN: WebServiceAccount is not specified in the config file. Using default: JPADESKTOP1ASPNET
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!servicecontroller!9!1/31/2008-16:16:13:: Total Physical memory: 1055309824
View 1 Replies
View Related
Jun 26, 2015
We setup a new Shared SQL server 2014 Web and transferred all SQL databases over. However when customers connect via SQL Management Studio they now get VIEW STATE error when right clicking on any table on any database.
Check screenshot.
View 4 Replies
View Related
Jan 5, 2006
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
View 12 Replies
View Related
Nov 19, 2015
when i open my computer and want to use SQL SERVER and when iam connecting it this error will occur "A network related or instance specific Error in SQL SERVER 2012" Then aim going to Services and Find SQLSERVER and start the services and it will connect..My Question is that why every time iam going to Start the services..I want to connect Automatically when i click on connect button in sql server its very rediculous to go evrytime in Services. i update my window 8.1 to windows 10 before it will connect automatically no need to go in services to start the SQLSERVER.
View 5 Replies
View Related
Aug 29, 2015
When I'm trying to create a database diagram for my tables., First it prompts me saying that - "This database does not have one or more of the supported objects... Do you wish to create them? I know this is normal when you don't have any diagrams. But after clicking "Yes", I get the following error which is attached.
I tried changing the database Owner to "sa". But, still the same error. Interestingly, other databases that are already having the database diagrams (created by others), are allowing me to create new diagrams in those databases. The only difference is, I created this database where I'm trying to create diagrams on. How do I get this working.
Below is Error Message:
View 2 Replies
View Related
Oct 2, 2013
I am trying to enable FILESTREAM on a SQL 2012 installation that is supporting a Sharepoint 2013 implementation. When I try to enable FILESTREAM using the SQL Server Configuration Manager I receive the following error:
There was an unknown error applying the FILESTREAM settings.
Check the parameters are valid. (0x80041008)
I have done this succussfully in the past in SQL2008R2/Sharepoin2010 environment but this is my first attempt with SQL2012/Sharepoint2013 and I am not sure how to proceed with troubleshooting.
View 14 Replies
View Related
May 8, 2015
No logs created, this is all I have:
Unhandled Exception: System.Security.SecruityException: Request failed.
at Microsoft.SqlServer.Chainer.Setup.Setup.DebugBreak()
at Microsoft.SqlServer.Chainer.Setup.Setup.Main()
Then the Managed SQL Server Installer box pops up with Managed SQL Server Installer has stopped working.
View 11 Replies
View Related
Jun 24, 2015
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies
View Related
Apr 14, 2013
I'm trying to activate FILESTREAM on my SQL Server 2012, however i'm not accomplishing it. I've tried to follow this instructions: [URL] ...
My SETUP is the following:
Windows 8 (64 bit)SQL Server Standard Edition - Service Pack 1 (64 bit)SQL Version: (11.0.3128.0)
When I go to the configuration manager, on the FILESTREAM tab has a message:
"A previous FILESTREAM configuration attempt was incomplete.
FILESTREAM may be in an inconsistent state until re-configured."
If I click Enable FILESTREAM and "Apply", I get the following message:
"There was an unknown error applying the FILESTREAM settings. Check the parameters are valid. (0x80070002)"
I also read somewhere to run "EXEC sp_configure", which produces the result:
"filestream access level - 0 2 2 0"
Running "SELECT SERVERPROPERTY ('FilestreamEffectiveLevel');" returns 0.
View 2 Replies
View Related
Mar 25, 2008
On the screen "Service Account" during SQL 2005 Developer Edition, I am choosing built-in System Account = Local System and uncheck the Customzie for each service account. that means, that this system account is set to all services,
Right?
please refresh my memory on this.
Thanks,
View 1 Replies
View Related
Nov 6, 2015
I am running a SQL 2008r2 install while logged onto the server with a local admin account, not a domain account. I am specifying a domain account to run the SQL service. The install fails saying the service account credentials are invalid but I am 99.9% sure they are right.My theory - the local admin account running Setup cannot validate the service account creds against AD. Is it a requirement to run Setup while logged on with a domain account?
View 4 Replies
View Related
Aug 15, 2007
Hi, I have the following setup:
- Win 2K Server, SP4
- SQL Srv 2K, SP4
- A 'DEV' domain, with an 'Administrator' account with all possible rights on the system
I need to configure a CmdExec proxy account in order to allow non-sys-admin users to execute the master.dbo.xp_CmdShell procedure.
When attempting to do this via QA as follows:
EXEC master.dbo.xp_sqlagent_proxy_account N'SET',
N'DEV', -- agent_domain_name
N'Administrator', -- agent_username
N'password' -- agent_password
...I get the following error:
"The system cannot find the path specified."
When attempting to do this via QA as follows (note: only change is adding domain to agent_username arg):
EXEC master.dbo.xp_sqlagent_proxy_account N'SET',
N'DEV', -- agent_domain_name
N'DEVAdministrator', -- agent_username
N'password' -- agent_password
...I get the following error:
"Error executing extended stored procedure: Specified user can not login"
I have tried this through Enterprise Manager and get identical results, of course.
I have also tried all of the following:
- different OS user accounts, including local system accounts with local admin rights;
- assigning the OS account to a SQL login with System Admin role/rights;
- specifically assigning the above SQL login with EXEC rights on the master.dbo.xp_CmdShell procedure;
- verifying local security policy settings, as per the following link: http://support.microsoft.com/?id=283811;
- pulling out my hair and banging my head against the wall.
Can anyone H E L P ? ! ! !
Thanks,
Joe
View 6 Replies
View Related
Sep 1, 2004
Hi, i tried to install MS SQL server 2000 in my XP system but during the setup service account installation, i tried to use a domain user account but it cannot validate my user name and password. I used my windows administrator logon account and password. Please help..thank you.
Thanks : :confused:
View 6 Replies
View Related
Oct 27, 2015
WHY master, msdb, model always seem to be on the " C " drive ....
View 4 Replies
View Related
Jul 20, 2015
My SQL Server has one MDF file and 3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.
I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.
View 3 Replies
View Related
Jul 23, 2015
I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
View 2 Replies
View Related
Apr 23, 2015
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
View 4 Replies
View Related
Jul 17, 2015
I am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server.
What should i do when i only want that application to use the database?
And so that you can only connect to the database from the same computer as the SQL server?
View 6 Replies
View Related
May 5, 2015
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;
[Code] ....
Can I delete all variables related to older versions safely without any issue.
View 13 Replies
View Related
Oct 8, 2010
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies
View Related
Jun 3, 2015
I am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
View 8 Replies
View Related
Jan 3, 2010
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
View 30 Replies
View Related
Sep 11, 2015
What are the DB mirroring trace flags and how to use ?
View 4 Replies
View Related
Jun 5, 2015
I've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?
View 6 Replies
View Related
Mar 14, 2013
If I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?
View 12 Replies
View Related
Sep 10, 2015
After installing SQl Server 2012, I need to perform some adjustments for its configurations.
On the TempDB, I want to:
1) Turn on Trace Flag 1117. How to do this?
2) Having only one transaction log file. How can I make sure of this?
3) Creating multiple files. How to do this?
View 3 Replies
View Related
Sep 19, 2015
I want to restore my SQL Server 2000 database backup to SQL Server 2014.
View 4 Replies
View Related
Sep 16, 2015
Do you have to move the entire content of the log folder to the new location?
View 4 Replies
View Related
