I tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.
View 11 RepliesI've been asked to create a new SQL server and restore an old server's DBs to the new server.
I'd like to generate a list of the DB names using powershell to distribute to their creators, in case some of these DBs are no longer needed.
My server has two 8 core processor. Should I use 8 or 16 data files for Tempdb?
View 4 Replies View RelatedMy SQL Server has one MDF file and 3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.
I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.
Do you have to move the entire content of the log folder to the new location?
View 4 Replies View RelatedWhen I install SQL 2012 on MS Server 2008 R2, I get this error..The following error has occurred: The system cannot open the device or file specified. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
The file in question is Install_VSShell_CPu32_Action. when I retry, the error is..The following error has occurred:SQL Server Setup has encountered an error when running a Windows Installer file.Windows Installer error message: This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. Windows Installer file:
Windows Installer log file: C:Program FilesMicrosoft SQL Server110Setup BootstrapLog20130522_143111VSShell_Cpu32_1.logClick 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
I am working on SQL Server 2014 and I want to know, Is it possible to change the location of SQL log file and will it affect to the database if it is possible to change its location?
View 4 Replies View RelatedI need reflecting changes of csv file in oracle DB. Suppose, I load single csv file in oracle DB which contains 10 rows. After some time, I have loaded another CSV file which has the modified row of the previously loaded csv file. So, how can I capture the CSV changes and how it is going to get reflected in oracle DB?There is no unique column in csv file to identify particular row.
View 3 Replies View RelatedI want to restore my SQL Server 2000 database backup to SQL Server 2014.
View 4 Replies View RelatedWhen I'm trying to create a database diagram for my tables., First it prompts me saying that - "This database does not have one or more of the supported objects... Do you wish to create them? I know this is normal when you don't have any diagrams. But after clicking "Yes", I get the following error which is attached.
I tried changing the database Owner to "sa". But, still the same error. Interestingly, other databases that are already having the database diagrams (created by others), are allowing me to create new diagrams in those databases. The only difference is, I created this database where I'm trying to create diagrams on. How do I get this working.
Below is Error Message:
I need to be able to create & connect to temporary databases programmatically, and NOT using the command-line, within a C# program. How would one go about doing this?
View 7 Replies View RelatedI can't install the SQL Server 2012 Express version with tools downloaded from [URL]
I'm getting the following error:
Error installing SQL Server Database Engine Services Instance Features
Could not find the Database Engine startup handle.
Error code: 0x851A0019
I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.
Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.
[URL]
Note: Visual studio is not installed.
I have checked my Production databases, both are went to Disconnected state, both are unable to connect to the application, i checked all the services and its working fine. and restarted the end points on Principal and Mirror, still issue not solved, after restart the witness server End point both the databases are working fine.
View 3 Replies View RelatedI downloaded the AdventureWorks2012 OLTP script. When I ran it it gave me some errors. I also noticed that it tried to install into the bult-in master database, it created a lot of tables and objects. Some questions :
1) How can I remove everything that the script installed into master database?
2) Do I need to create 1st an empty database and then run the script there?
3) I am running the script from a custom path (C:DownloadsMicrosoft SQL Server 2012AdventureWorks 2012 OLTP Script.zipAdventureWorks 2012 OLTP Script) not sure if this is causing some of the errors as the script, in the beggining has a path to other folders :
:setvar SqlSamplesDatabasePath "C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERMSSQLDATA"
-- NOTE: Change this path if you copied the script source to another path
:setvar SqlSamplesSourceDataPath "C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERToolsSamplesAdventureWorks 2012 OLTP Script"
4) Final question, I also downloaded the AdventureWorks 2012 simple database (AdventureWorks2012_Data.mdf). Is this file the same database as the one created by the OLTP script?
We have installed 2014 sql server on a stand alone VM and can create alerts without issue. We recently did a cluster install of 2014, and when trying to create alerts get the following error:
Msg 14262, Level 16, State 1, Procedure sp_verify_performance_condition, Line 52
The specified object_name ('Databases') does not exist.
Specifically, we are trying to create a database alert on percent log used that will kick off a job to back up the log.
We are on Windows 2012R2 o/s. In the drop downs in SSMS under alerts, we do not have all the options we have in the stand alone instance - they are not there. Is this a bug? Is there a CU?
How does one enable sql connections limits for user connections per new and existing databases? how to do it on whole server per database but not set a limit per user.Looks like this must be run on each databases but what if you have 100s of databases:
USE AdventureWorks2012 ;
GO
EXEC sp_configure 'show advanced options', 1;
GO
RECONFIGURE ;
GO
EXEC sp_configure 'user connections', 325 ;
GO
RECONFIGURE;
GO
I have an existing, licensed installation of SQL 2008 R2, with one database instance. I need to add a second instance, but do not currently have access to the installation media. Can I use the Microsoft® SQL Server® 2008 Enterprise
Evaluation: Trial Experience for IT Professionals installer that's available for download from the Microsoft download site?
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Some time ago I saw a section in sql 2005 BOL describing the t-sql features that have changed from sql 2000 to sql 2005. For example, some NULL handling and that "*=" is no longer supported. Can anyone find that refernece for me?
TIA,
Barkingdog
Hello all. Before my arrival at my current employer, our consultantsphysically set up our MSSQL 7 server as follows:drive c: contains the mssql enginedrive d: contains the transaction logdrive e: contains the data filesNo filegroups were set up and the data files consist of only 1 largephysical file. Currently, our data file is >10GB. When I was trained onthe physical aspects of sqlserver, I was told to never create physical files[color=blue]> 2048MB each. If I did, I could expect inefficient physical storage of[/color]data and slower performance (due to the OS).Our server has 2 RAID-5 arrays. Drive c: and e: are located on the firstarray and drive d: on the second. We're running Windows 4.0 NT Server SP6with NTFS.Can someone comment on the use of 1 single large data file vs. more smallerdata files?
View 2 Replies View RelatedHi there,
Today I tried out Integration Services and after a couple of hours of confusion I am impressed by the power of this product. I was wondering if I might get some help on the 'best practice' for the following requirements:
I have a foreach container that scans a directory and calls a data flow task for each file in the directory. The files import to the database fine, but I want to modify the procedure so it only imports files that have not yet been imported. There are a couple of scenarios:
- a file is created in the directory
- a file is modified in the directory
In both cases I want to insert (or reinsert) the file. How can I modify my package to accomodate this behaviour? Storing the filename is an option, but I am not sure how to also bring in the file creation/modified dates.
Is this the right approach?
Any other ideas?
Cheers,
Alex
Hi All, I'am looking for a software (Installer) to create a setup file to install a SQL Server Database just like the one in the Reports Starter Kit, when you install it a dialog will guide you to instaal the database thats what i'am looking for. Anybody knows how can i do that or is there a software that can help me doing that.Best Regards.Wafi Mohtaseb
View 2 Replies View RelatedHi all,
I downloaded and ran AdventureWorks.msi into my SQL Server Management Studio Express (SSMSE) one year ago.But I did not know how to attach it to my SSMSE then. Last week, I deleted it from the "Add or Remove" of Control Panel and I downloaded the new AdventureWork.msi and installed it my SSMSE. Today, I tried to use the Database Explorer of VB 2005 Express for the first Stored Procedure programming. I clicked on AdventureWorks.mdf and I got the following error: One or more files do not match the primary of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupt and should be restored from a backup. Cannot open user default database. Login failed. Login failed for user 'CENADe1enxshc'. Log file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data_log.ldf' does not match the primary file. It may be from a different database of the log may have been rebuilt previously. Please help and advise me how to correct this problem.
Thanks,
Scott Chang
WHY master, msdb, model always seem to be on the " C " drive ....
View 4 Replies View RelatedI am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
View 4 Replies View RelatedI am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server.
What should i do when i only want that application to use the database?
And so that you can only connect to the database from the same computer as the SQL server?
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;
[Code] ....
Can I delete all variables related to older versions safely without any issue.
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies View RelatedI am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
View 8 Replies View RelatedI'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.