Setup And Upgrade :: Moving Log File To Different Disk

Sep 16, 2015

Do you have to move the entire content of the log folder to the new location?

View 4 Replies


ADVERTISEMENT

Moving Transaction Log File To Another Disk

Apr 5, 2004

Hi all,
I have to give support to this new client of ours and the system out there was a real mess.The log files for all four databases were ranging from 5 to 9 GB's, no maintanance no nothing was done since the setup of the system. I have truncated the logs after taking proper backups since it all started after they compalined a DTS was not working, which was due to no disk space available ;).
Now I have to shift the log files to a seperate disk.
I know it can be done by detaching the database and attaching it back, I was wondering if we can do it without bringing the system offline?
Anycomments welcome.
Thankyou.
regards,
harshal.

View 1 Replies View Related

Setup And Upgrade :: Splitting MDF And NDF File?

Jul 20, 2015

My SQL Server has one MDF file and  3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.

I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.

View 3 Replies View Related

Setup And Upgrade :: System Cannot Open Device Or File Specified

May 22, 2013

When I install SQL 2012 on  MS Server 2008 R2, I get this error..The following error has occurred: The system cannot open the device or file specified. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.

The file in question is Install_VSShell_CPu32_Action. when I retry, the error is..The following error has occurred:SQL Server Setup has encountered an error when running a Windows Installer file.Windows Installer error message: This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. Windows Installer file:

Windows Installer log file: C:Program FilesMicrosoft SQL Server110Setup BootstrapLog20130522_143111VSShell_Cpu32_1.logClick 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.

View 7 Replies View Related

Setup And Upgrade :: Log File Location Change In Server

Oct 10, 2015

I am working on SQL Server 2014 and I want to know, Is it possible to change the location of SQL log file and will it affect to the database if it is possible to change its location? 

View 4 Replies View Related

Setup And Upgrade :: MDF File - Database Files Icon Changed Or Grayed Out

Jun 17, 2015

I tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.

View 11 Replies View Related

Setup And Upgrade :: Use Powershell To Output Database Names On Old Server On Text File?

May 28, 2015

I've been asked to create a new SQL server and restore an old server's DBs to the new server.

I'd like to generate a list of the DB names using powershell to distribute to their creators, in case some of these DBs are no longer needed.

View 2 Replies View Related

Setup And Upgrade :: 2008 R2 Setup UI Has Incomplete List Of Installed Features - Can't Uninstall RS

Jul 23, 2015

We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page.  In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.

View 3 Replies View Related

Setup And Upgrade :: Error Setup Account Privileges

Nov 15, 2015

I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop.  When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7.  How do I get around this without having to resort to a computer running Windows Server?

I have Visual Studio 2013 premium installed along with Localdb v11.  I just want to connect and manage my database engine through SSMS when developing any application.

View 2 Replies View Related

Setup And Upgrade :: One Machine 6 IPs - How To Setup DNS For Server

Apr 24, 2015

I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:

MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2

If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.

View 3 Replies View Related

Moving LogFile From One Disk To Another

Apr 11, 2002

I am trying to move a logfile from one disk to another. I've detached the database, moved the logfile to another disk and reattached the database. I used the sp_detach and sp_attach_db to specify the paths of the *.MDF and *.LDF. I've tried it through Enterprise Manager and with boths ways I get an error message saying: "Error 9003: The LSN (201:48:2) passed to log scan in database 'DatabaseName' is invalid". Does anyone know what this means and how I can get around this. I've even tried to attach the database with the logfile in the original path and I still get that error. Need Help Please!

Thanks

View 2 Replies View Related

Moving RootDirectory From Disk C To D

Nov 8, 2007

Hello,

I need move my SQL Server 2005 installation (Database Engine, Analysis Services) from one disk to another.

C:Program FilesMicrosoft SQL ServerMSSQL.1C:Program FilesMicrosoft SQL ServerMSSQL.2
to

D:SQL2005MSSQL.1D:SQL2005MSSQL.2
May you help me how do this?


--
Regards,
anxcomp

View 2 Replies View Related

Disk Crash Of Disk That Contains The Paging File.

Feb 20, 2001

Hello,

this is my configuration :

1) 3 disks in RAID5 that hold the SQL data
2) 1 disk in RAID0 that holds the only paging file.

What will happen to the SQL data (DB) when the disk that holds the paging file crashes?

Kindest regards,
Luc.

View 1 Replies View Related

Moving A Database To Another Physical Disk

Jun 7, 2006

I want to move 2 databases to another physical disk. They are both single file databases. It looks like a fairly straigtforward attach and detach procedure, but I have a couple of questions:

The log files (.ldf) currently reside on a separate physical disk from the data files, if I attach and reattach the data files will the logs remain where they are by default or do I have to re specify there location?

Is there any advantage to running the update statistics portion of the sp_detach_db?

View 1 Replies View Related

Moving Indexes To Their Own Disk Drive

Apr 22, 2004

I am trying to find out if it is possible to move indexes to a separate filegroup/disk drive during database restore. I am trying this to see if it improves performance. Also if I cannot move the indexes during restore, how would I move them afterwards to a different filegroup/disk drive? Thanks in advance for all the help.

View 7 Replies View Related

Moving Tempdb To Free Up Disk Space

Nov 29, 2000

does anyone know if tempdb can be physically moved to a different partition on a disk drive on SQL Server 7.0? Since it can't be backed up I'm hesitant to use the sp_detach/sp_attach procedure because I don't want to crash it. If nothing else is available, I can attempt moving it this way at the end of the day and then just reboot to get tempdb back up again if the server fails, but I'd really appreciate a suggestion from someone who has more know-how than I do about system table operations. Thanks again

View 1 Replies View Related

Moving Data Files To A New Disk, Same Server

Jul 23, 2005

Hello, I have been having a bit of trouble finding help on the safestway to move data files to a different disk on the same server. Mosthelp is about moving data files to a different sqlserver. I just wantto move the files to a different drive on the same server. Any helpwould be appreciated.Thanks,David

View 6 Replies View Related

Upgrade Tp 7.0 Disk Space Requirements

Mar 30, 1999

Hello
I am trying to upgrade our 6.5 server (which approx takes up 18GIG of data/log) to 7.0...it failed since I only have 7GIG space left.

Do I realy need to come up with an additional 18GIG to accomodate the upgrade?
Thanks. Bob

View 1 Replies View Related

SQL 2012 :: Disk / RAID Setup With Limited Disks For Windows 2008 R2

Jun 27, 2015

I am wondering what would be the best disk/RAID setup for a Windows server 2008 R2 OS and SQL Server 2012 database that has heavy read/write. I have the following disks I can use:

4x 15k 146GB
2x 10k 600GB

According to the server build requirements for the application, I need 100GB for the OS and 290GB for the drive containing the SQL mdf there are no stated requirements for the ldf, but would like to know if it should be allocated elsewhere?I should do RAID 10 for the 15k drives for SQL and RAID 1 for the OS on the 10k.

View 6 Replies View Related

Setup And Upgrade :: WHY Master On C Drive

Oct 27, 2015

WHY master, msdb, model always seem to be on the " C " drive ....

View 4 Replies View Related

Setup And Upgrade :: Cannot Connect To WMI Provider

Jul 23, 2015

I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog

ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003

Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.

View 2 Replies View Related

Setup And Upgrade :: Way To Get To SSIS Or SSAS

Apr 23, 2015

So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.

View 4 Replies View Related

Setup And Upgrade :: Allow Only Connection From Same Computer

Jul 17, 2015

I am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server. 

What should i do when i only want that application to use the database?

And so that you can only connect to the database from the same computer as the SQL server?

View 6 Replies View Related

Setup And Upgrade :: Several Same Environment Variables In Path

May 5, 2015

I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables

C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;

[Code] ....

Can I delete all variables related to older versions safely without any issue.

View 13 Replies View Related

Setup And Upgrade :: Cluster Installation Failed

Oct 8, 2010

when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..

View 12 Replies View Related

Setup And Upgrade :: Missing System Administrator

Jun 3, 2015

I am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.

View 8 Replies View Related

Setup And Upgrade :: Add A Failover Cluster Node

Jan 3, 2010

I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:

Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.

View 30 Replies View Related

Setup And Upgrade :: What Are DB Mirroring Trace Flags And How To Use

Sep 11, 2015

What are the DB mirroring trace flags and how to use ?

View 4 Replies View Related

Setup And Upgrade :: Run Multiple Instances On 2014?

Jun 5, 2015

I've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?

View 6 Replies View Related

Setup And Upgrade :: SSMS Restarts Itself After Close It?

Mar 14, 2013

If I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?

View 12 Replies View Related

Setup And Upgrade :: TempDB - Configurations Adjustments?

Sep 10, 2015

After installing SQl Server 2012, I need to perform some adjustments for its configurations.

On the TempDB, I want to:

1) Turn on Trace Flag 1117. How to do this?

2) Having only one transaction log file.  How can I make sure of this?

3) Creating multiple files. How to do this?

View 3 Replies View Related

Setup And Upgrade :: Database Backup Restore

Sep 19, 2015

I want to restore my SQL Server 2000 database backup to SQL Server 2014.

View 4 Replies View Related

Setup And Upgrade :: Index Was Outside Bounds Of The Array

Sep 17, 2015

I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.

Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML
3.0 6.0 
Microsoft Internet Explorer
9.11.9600.17041
Microsoft .NET Framework
2.0.50727.5485
Operating System
6.1.7601

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved