Setup And Upgrade :: Run Multiple Instances On 2014?
Jun 5, 2015I've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?
View 6 RepliesI've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?
View 6 RepliesWe have a SQL enterprise server 2014 with two installed instance.
First instance for SharePoint 2013 DBs and second instance Dynamics AX 2012 R3 DBs.
The server has 32 GB of RAM, currently the process usage for first instance is 26 GB and second instance is 700 MB.
Which mean that SharePoint DBs in the first instance is consuming most of the RAM.
My question is there any way to assign a fixed RAM usage for a specific instance without affecting the other instance?
for example 16 GB only first instance and 16 GB to second instance.
Will installing another instance restart other instances?Server is Windows Server 2012 R2, SQL Server is 2012.
View 3 Replies View RelatedWe have 2 clustered SQL instances (2 physical servers in each cluster). Instance2 needs to be setup as a linked server on Instance1.
At this time port 1433 between them is not open. I am referring to the port on the network switch, not in the Windows Firewall (ports in Windows Firewall are already open).
Is opening the port between virtual IP-s sufficient? Or does port need to be open between all physical source/destination IP-s as well?
Have a production server, 12 Enterprise, and we are adding a new app to an existing instance. Next app needs SSRS and that was not put in the install request a year ago for the instance.
I do not think a reboot is required but have been wrong before. There are no SPs applied to this server and only last week we were given go ahead from one app vendor to apply SPs. That would have been done in monthly maintenance cycle next weekend. Our test server is doing just fine with all apps on SP1.
If I install a new named instance of SQL Server 2008 R2 on a machine that already has 3 named instances that are upgraded to service pack 3, will the install of the new instance overwrite any of the current SP3 files? Will I have to re-apply SP 3 to the existing instances?
View 4 Replies View RelatedHi,
I have 2 W2K box's and want to install 4 SQL servers on each box & each different character set and want to setup clustering (Active - passive).
Do any one of you setup this type environment ?, Pl. let me know if you have any suggestions ..
Regards,
Madhu
I have a very strange problem when I try to install SQL Express 2014 on 1 PC on my network.
The setup is blocking on the step "rules of functionnality" (I hope it is the good translation ...).
I ha ve a message that indicates that there is a problem the following checking : "It exists a Internet connection with the download center for Microsoft Framework 4.0". At the beginning I had Framework 3.5 and 4.5 installed on the PC.
When I tried to install manually Framework 4.0 I had a message that indicated that the setup was not possible because there was a Superior version. So I uninstall v4.5 and install v4.0 normally.
I run again SQL 2014 Express setup but I have always the same error. I take a look on Internet to look for the same problem but I found nothing.
We successfully restore 2005 backup into SQL 2014 , so does that mean , does it mean all are ok ? or we have to do something next ?
View 6 Replies View RelatedCan the SQL 2005 install upgrade from SQL 2000 handle multiple instances?
View 1 Replies View RelatedI'm looking at installing 2008R2 and 2014 side by side, then using Mirroring to provide HA for the 2008R2 instance and AoHA for the 2014 instance. I'd be using the same two physical servers for both the Mirroring pair and the AoHA pair.
View 2 Replies View RelatedI am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVER
C:Program FilesMicrosoft SQL ServerMSRS12.MSSQLSERVER
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.TEST
C:Program FilesMicrosoft SQL ServerMSRS12.TEST
Running the Reporting Services Configuration Manager, I select the Test instance and create the Report Server Test instance database.
My first thought would be that the Test instance Report Server database would be in the following location:
C:Program FilesMicrosoft SQL ServerMSSQL12.TESTMSSQLDATA
Instead this database is located with the default instance Report Server database:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Hello,
I am after a bit of advice about running the Upgrade Advisor tool on a server that has more than 1 SQL Server instance. My particular focus is DTS on each server.
I tried running the tool, setting up an XML file per SQL Server (including named instances). An example of the XML is I used is included below):
<Configuration> <Server>SQL01</Server> <Instance>INSTANCE01</Instance> <Components> <DataTransformationServices /> </Components></Configuration>
When the tool runs, folders get created for the relevant named instances, but the DTS runs against the default instance only. In other words, the default instance DTS.xml file gets overwritten several times.
Does anyone know if the Upgrade Advisor tool can handle multiple SQL instances on the same server, particularly in realtion to DTS?
I had thought this might have been a limitation as the options in the Report Viewer are "Server" then "Instance or Component", when I am really after "Server", "Instance" AND "Component".
Any suggestions welcome.
Thanks in advance, Paul
My SQL2000 databases did not upgrade to SQL2005. When I look at the Properties>>Options>>Compatibility Level the only options I have is version 7 and version 8... version 9 - which is SQL2005, is not there.
So what did I do? During the upgrade process - the installation wizard - I made a couple of choices that I believe might have lead to my current condition. The first thing is that I chose to select a installed instance. The second choice I made was to use a domain user account for the Authentication. The second selection I believe had nothing to do with the condition, but I did notice that my Systems Admin user account for SQL is no longer availble... which is a problem because now when I log into the SQL Management Console... it's using the domain name to authenticate rather than using the SA name like it was in SQL2000.
So here is what I think the solution is... I need to create a new Server Registration and create the databases in the new instance and then restore the data from SQL2000 to SQL2005 new instance, and then I can change the Compatibility Level to version 9.
The only issue I still don't have an answer for is the authentication into SQL. I want to not use the domain user account... how can I change this or can I? This also creates an issue when creating the ODBC connection as it wants to use the domain user account to verify.
So if someone can let me know if this is the right direction? Also any suggestions... i would greatly appreciate it!
John
I am trying to install SQL2K5 on my machine where I already have SQL2K installed.
The best I have managed to achieve is to get SQL2K5 EM looking at my SQL2K databases.
Do I need to uninstall SQL2K before installing SQL2K?
Depending on what combo of SQL I have installed my options on SQL2K install vary.
I am a bit lost at this point.
Anyone know a link to a good white paper type doc that guides me through an install on the same machine.
Thanks In Advance
MPM
Hi,
I think this is a question for the specialists among us.
Can I use one general reporting server (installed on instance MAINREPORTING)
for multiple customers who all have their own sql instance (CUST1, CUST2, CUST3, ..)
I would use UserAuthenciation on the reportserver url to display the specific reports customers can use.
Is this possible, and what do i have to take care off concerning installation and/or configuration (especially on
the reporting side) ?
Greetings
Vinnie
I am tasked with correcting 600 SQL Server instances default settings. I would like to use powershell, if possible to loop thorough each named instances (I have a list) and apply the following settings. I also need to query the server for the installed memory and apply * 80% logic for maxmem, and look at the VCPU count and adjust the MAXDOP to that number.
USE MASTER
GO
EXEC sp_configure 'recovery interval (min)', '0';
RECONFIGURE WITH OVERRIDE;
EXEC sp_configure 'allow updates', '0';
RECONFIGURE WITH OVERRIDE;
EXEC sp_configure 'user connections', '0';
[code].....
We have a SQL 2014 active passive cluster with 5 instances. When the cluster was installed one of the nodes was a virtual machine. As we started to have problems and this is not a Microsoft supported configuration we decided to replace the virtual node with a phyiscal one. On 3 of these 5 instances we configured static ports (1433 TCP) this was required for applications and firewall implementation.
Now with the physical node joined to the cluster we have issues with these three instances. Whenever one of these instances is moved to the passive node the server authentication is changed from mixed to windows only. I'm no SQL expert at all but to me it looks like the configuration of the instances are not replicated to the passive node? I found some similar problems on the net but these are mostly under sql 2008.
WHY master, msdb, model always seem to be on the " C " drive ....
View 4 Replies View RelatedMy SQL Server has one MDF file and 3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.
I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.
I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
View 4 Replies View RelatedI am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server.
What should i do when i only want that application to use the database?
And so that you can only connect to the database from the same computer as the SQL server?
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;
[Code] ....
Can I delete all variables related to older versions safely without any issue.
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies View RelatedI am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
View 8 Replies View RelatedI'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
What are the DB mirroring trace flags and how to use ?
View 4 Replies View RelatedIf I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?
View 12 Replies View RelatedAfter installing SQl Server 2012, I need to perform some adjustments for its configurations.
On the TempDB, I want to:
1) Turn on Trace Flag 1117. How to do this?
2) Having only one transaction log file. How can I make sure of this?
3) Creating multiple files. How to do this?