My SQL Server has one MDF file and 3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.
I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.
Do you have to move the entire content of the log folder to the new location?
View 4 Replies View RelatedWhen I install SQL 2012 on MS Server 2008 R2, I get this error..The following error has occurred: The system cannot open the device or file specified. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
The file in question is Install_VSShell_CPu32_Action. when I retry, the error is..The following error has occurred:SQL Server Setup has encountered an error when running a Windows Installer file.Windows Installer error message: This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. Windows Installer file:
Windows Installer log file: C:Program FilesMicrosoft SQL Server110Setup BootstrapLog20130522_143111VSShell_Cpu32_1.logClick 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
I am working on SQL Server 2014 and I want to know, Is it possible to change the location of SQL log file and will it affect to the database if it is possible to change its location?
View 4 Replies View RelatedI tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.
View 11 Replies View RelatedI've been asked to create a new SQL server and restore an old server's DBs to the new server.
I'd like to generate a list of the DB names using powershell to distribute to their creators, in case some of these DBs are no longer needed.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
First of all apologies for posting this again but I posted it in thewrong place the first time.Can anybody help me with the post below?http://groups.google.com/group/SQL-...5ec9f04d978d0deThanks,Paul
View 1 Replies View RelatedWHY master, msdb, model always seem to be on the " C " drive ....
View 4 Replies View RelatedI am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
View 4 Replies View RelatedI am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server.
What should i do when i only want that application to use the database?
And so that you can only connect to the database from the same computer as the SQL server?
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;
[Code] ....
Can I delete all variables related to older versions safely without any issue.
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies View RelatedI am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
View 8 Replies View RelatedI'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
What are the DB mirroring trace flags and how to use ?
View 4 Replies View RelatedI've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?
View 6 Replies View RelatedIf I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?
View 12 Replies View RelatedAfter installing SQl Server 2012, I need to perform some adjustments for its configurations.
On the TempDB, I want to:
1) Turn on Trace Flag 1117. How to do this?
2) Having only one transaction log file. How can I make sure of this?
3) Creating multiple files. How to do this?
I want to restore my SQL Server 2000 database backup to SQL Server 2014.
View 4 Replies View RelatedI am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML
3.0 6.0
Microsoft Internet Explorer
9.11.9600.17041
Microsoft .NET Framework
2.0.50727.5485
Operating System
6.1.7601
My server has two 8 core processor. Should I use 8 or 16 data files for Tempdb?
View 4 Replies View RelatedWe setup a new Shared SQL server 2014 Web and transferred all SQL databases over. However when customers connect via SQL Management Studio they now get VIEW STATE error when right clicking on any table on any database.
Check screenshot.
I installed a default SQL Server 2012 instance on Windows Server 2012.I enabled the SQL Browser and changed the TCP port of the instance to 1435. I changed port 1433 to 1435 I was able to connect to the instance using SSMS on another server. Now I have to enter Servername,1435 to make a connection.Why does the SQL Browser not resolve the servername to the right IP address and port 1435? Why am I not able to make a connection when I enter the servername or <servername>MSSQLSERVER? Is a SQL Browser only resolving named instances?This works fine for a named instance. Is there something special about default instances or the SQL Browser?
View 15 Replies View Relatedwhen i open my computer and want to use SQL SERVER and when iam connecting it this error will occur "A network related or instance specific Error in SQL SERVER 2012" Then aim going to Services and Find SQLSERVER and start the services and it will connect..My Question is that why every time iam going to Start the services..I want to connect Automatically when i click on connect button in sql server its very rediculous to go evrytime in Services. i update my window 8.1 to windows 10 before it will connect automatically no need to go in services to start the SQLSERVER.
View 5 Replies View RelatedEvery day, at same hour, my SQL Server is showing error of PLE less than 300 seconds.
So after this, the server works properly.
i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433
View 14 Replies View RelatedFor some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. i need to get SQL server up and running.
View 2 Replies View RelatedI'm trying to install SQL Server 2008 on a virtual machine with Windows 2008 R2. Setup fails with the error "Attempted to perform an unauthorized operation". Looking at the installation log, I see these details:
2009-09-29 08:24:49 SQLBrowser: sRegLocation = 'SOFTWAREMicrosoftMicrosoft SQL Server', regView = 'Wow6432', sSddl = '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$ITISFIM])', bOptional = 'False'.
2009-09-29 08:24:49 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
[code]....
I'm trying to upgrade an existing installation of SSE 2005 to SSE 2005 with Advanced Services SP1 so I can take advantage of Reporting Services. I'm installing on a box that has XP Pro SP2 installed. As prompted by the SSE setup, I had to install IIS. After installing IIS, the setup went along okay until it came time to configure the report server. I chose the default (configure with the default configuration) and I get the following error message:
TITLE: Microsoft SQL Server Setup
------------------------------
SQL Server Setup failed to obtain system account information for the ASPNET account. To proceed, reinstall the .NET Framework, and then run SQL Server Setup again.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28126
------------------------------
BUTTONS:
OK
------------------------------
Anybody know what is causing the error and how to fix it? I tried the above link and it didn't provide any helpful information. Do I really need to reinstall the .Net Framework (I'm hoping not)? Any help would be greatly appreciated.
Thanks,
Tony