I've been asked to create a new SQL server and restore an old server's DBs to the new server.
I'd like to generate a list of the DB names using powershell to distribute to their creators, in case some of these DBs are no longer needed.
I tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.
View 11 Replies View RelatedOur software vendor rep is trying to upgrade MS SQL server 2008 SP4 to 2012 SP1. Get an error message: no mapping between account names and security ADs was done. He says that we get this error message because we have two domain controllers in our network, and one is running on the same windows server that run sql server. Out IT support disagrees to delete the second domain controller, saying it is recommended by Microsoft and he suggests that the problem is in Active directory.
View 2 Replies View RelatedI am working on SQL Server 2014 and I want to know, Is it possible to change the location of SQL log file and will it affect to the database if it is possible to change its location?
View 4 Replies View RelatedWhen I execute the following command, I get the output truncated to 79 characters, including three dots (as an ellipsis, I suppose).
EXEC master..xp_cmdshell 'powershell.exe "Get-ChildItem D:Databazepaleontologieprilohyverejneg -filter g417*.* -recurse | select Fullname | out-string -width 255"'When I execute the core command directly in Powershell, whether the text or ISE version, it works correctly, with or without the out-string -width command.
Get-ChildItem D:Databazepaleontologieprilohyverejneg -filter g417*.* -recurse | select Fullname | out-string -width 255What does it take to get SSMS to not truncate my output strings?
I want to run a powershell script using xp_cmdshell, put the results into a temp table and do some additional stuff.I'm using:
CREATE TABLE #DrvLetter (
iid int identity(1,1) primary key
,Laufwerk char(500),
)
INSERT INTO #DrvLetter
EXEC xp_cmdshell 'powershell.exe -noprofile -command "gwmi -Class win32_volume | ft capacity, freespace, caption -a"'
select * from #DrvLetter
SQL server is cutting off the output, what I get is (consider the 3 dots at the end of a line):
[code]....
My SQL Server has one MDF file and 3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.
I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.
Do you have to move the entire content of the log folder to the new location?
View 4 Replies View RelatedI am having a Stored Procedure Or SQL Script to be attached to Job Scheduler. When this Stored procedure executes it generates some output text. I need to store this output to text file when ever this store Procedure (or) SQL Script executed by job Scheduler.
View 9 Replies View RelatedI am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
When I install SQL 2012 on MS Server 2008 R2, I get this error..The following error has occurred: The system cannot open the device or file specified. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
The file in question is Install_VSShell_CPu32_Action. when I retry, the error is..The following error has occurred:SQL Server Setup has encountered an error when running a Windows Installer file.Windows Installer error message: This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. Windows Installer file:
Windows Installer log file: C:Program FilesMicrosoft SQL Server110Setup BootstrapLog20130522_143111VSShell_Cpu32_1.logClick 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
Hello Everyone,
I am developing a asp.net application using sql server 2005 with full-text searching.
Question
I am looking for a recommnded hardware setup for the databases server. I know there is no one answer but I am wondeirng if there is a microsoft guide that I could use.
If anyone has any experience, i would welcome your comments as well.
I am estiamting that the full text index will be about 2-4 gb in size, most of the activity will be full-text searches.
Also, any good benchmarks out there for full-text searching or sql server tps ?
Thank you for your time!!
I want to restore my SQL Server 2000 database backup to SQL Server 2014.
View 4 Replies View RelatedI'd like to know how to get windows events script below into a SQL Server Table.
Get-WinEvent -LogName application -MaxEvents 200 | where {$_.LevelDisplayName -eq "Error"}
When I'm trying to create a database diagram for my tables., First it prompts me saying that - "This database does not have one or more of the supported objects... Do you wish to create them? I know this is normal when you don't have any diagrams. But after clicking "Yes", I get the following error which is attached.
I tried changing the database Owner to "sa". But, still the same error. Interestingly, other databases that are already having the database diagrams (created by others), are allowing me to create new diagrams in those databases. The only difference is, I created this database where I'm trying to create diagrams on. How do I get this working.
Below is Error Message:
Hi All, I'am looking for a software (Installer) to create a setup file to install a SQL Server Database just like the one in the Reports Starter Kit, when you install it a dialog will guide you to instaal the database thats what i'am looking for. Anybody knows how can i do that or is there a software that can help me doing that.Best Regards.Wafi Mohtaseb
View 2 Replies View RelatedI need to be able to create & connect to temporary databases programmatically, and NOT using the command-line, within a C# program. How would one go about doing this?
View 7 Replies View RelatedI can't install the SQL Server 2012 Express version with tools downloaded from [URL]
I'm getting the following error:
Error installing SQL Server Database Engine Services Instance Features
Could not find the Database Engine startup handle.
Error code: 0x851A0019
I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.
Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.
[URL]
Note: Visual studio is not installed.
I have checked my Production databases, both are went to Disconnected state, both are unable to connect to the application, i checked all the services and its working fine. and restarted the end points on Principal and Mirror, still issue not solved, after restart the witness server End point both the databases are working fine.
View 3 Replies View RelatedIs it possible to send the output of a query to a text file in a stored procedure? When I run stored procedure in Query Analyzer I am able to do that and I am wondering if this is possible in a automated way?
View 2 Replies View RelatedHey guys I am trying to do a SELECT statement that will allow me to export a table to a .txt file? how can I do this.
ex.
Select * from XXXXXX (what do I need to but XXXXXX table into a txt file)
Thank you.
How can I get data from table to text-file by SQL-commands, for exampleSELECT * FROM Table. Result to text-file Table.txt.
View 1 Replies View RelatedIs it possible to send the output of a query to a text file in a stored procedure? When I run stored procedure in Query Analyzer I am able to do that and I am wondering if this is possible in a automated way?
View 4 Replies View RelatedHi, just wondering if it is possible to have an insert trigger write out to a text file the inserted values of the latest row. If so some example code would be much appreciated
View 4 Replies View RelatedI am using SQL Server 2000.
Wanted to get the below result of below SP in text file using DTS. SP's out put is mix of text lines (as in print statement) and result of a table (FinInterface.dbo.UsersThatDontExist ). I am having difficulty to have the results of sp in text file. Any help there!!!!
CREATE PROCEDURE [dbo].[F1USERLIST] AS
print '========================================='
print 'Finance One Daily User Records Report '
declare @recordcount as int
declare @nodename sysname
Exec master.dbo.xp_regread @rootkey='HKEY_LOCAL_MACHINE',
@key='SYSTEMCurrentControlSetControlComputerNameComputerName',
@value_name='ComputerName', @value=@NodeName OUTPUT
print getdate()
print '========================================='
print 'This email was generated automatically by'
Print 'Data Transformation Service(DTS Package): Finance One user List 2'
Print 'In Database : ' + db_name()
Print 'On Server : ' + @NodeName
Print ' '
print '-----------------------------------------------------------------'
Select @RecordCount=(select count(*) from FinInterface.dbo.UsersThatDontExist)
If @RecordCount>0
begin
SELECT user_id AS USERNAME,
fst_name AS FIRST_NAME,
lst_name AS LAST_NAME
FROM FinInterface.dbo.UsersThatDontExist
Print 'There were ' + ltrim(str(@RecordCount)) + ' users in Finance One with incorrect information'
end
else
Print 'All users in Finance One have valid information'
print 'ACTION REQUIRED: Please update the user information in Finance One'
print '======================================='
Print 'End of Report'
GO
I downloaded the AdventureWorks2012 OLTP script. When I ran it it gave me some errors. I also noticed that it tried to install into the bult-in master database, it created a lot of tables and objects. Some questions :
1) How can I remove everything that the script installed into master database?
2) Do I need to create 1st an empty database and then run the script there?
3) I am running the script from a custom path (C:DownloadsMicrosoft SQL Server 2012AdventureWorks 2012 OLTP Script.zipAdventureWorks 2012 OLTP Script) not sure if this is causing some of the errors as the script, in the beggining has a path to other folders :
:setvar SqlSamplesDatabasePath "C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERMSSQLDATA"
-- NOTE: Change this path if you copied the script source to another path
:setvar SqlSamplesSourceDataPath "C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERToolsSamplesAdventureWorks 2012 OLTP Script"
4) Final question, I also downloaded the AdventureWorks 2012 simple database (AdventureWorks2012_Data.mdf). Is this file the same database as the one created by the OLTP script?
We have installed 2014 sql server on a stand alone VM and can create alerts without issue. We recently did a cluster install of 2014, and when trying to create alerts get the following error:
Msg 14262, Level 16, State 1, Procedure sp_verify_performance_condition, Line 52
The specified object_name ('Databases') does not exist.
Specifically, we are trying to create a database alert on percent log used that will kick off a job to back up the log.
We are on Windows 2012R2 o/s. In the drop downs in SSMS under alerts, we do not have all the options we have in the stand alone instance - they are not there. Is this a bug? Is there a CU?
How does one enable sql connections limits for user connections per new and existing databases? how to do it on whole server per database but not set a limit per user.Looks like this must be run on each databases but what if you have 100s of databases:
USE AdventureWorks2012 ;
GO
EXEC sp_configure 'show advanced options', 1;
GO
RECONFIGURE ;
GO
EXEC sp_configure 'user connections', 325 ;
GO
RECONFIGURE;
GO
I have an existing, licensed installation of SQL 2008 R2, with one database instance. I need to add a second instance, but do not currently have access to the installation media. Can I use the Microsoft® SQL Server® 2008 Enterprise
Evaluation: Trial Experience for IT Professionals installer that's available for download from the Microsoft download site?
Hi,
I have to write a sp which takes in a input and redirect the result to a text file?
Any idea how to write it?
TIA.
Do anyone knows the syntax for saving the results from a query to a text file
in query analyzer?
Thanks!
Vic
Hi all,
How can get the output of a quries / stored procedures in a text file and to append the text file each time quries / stored procedures run
Thanks all
how to write a query output into a text file in a c: directory
the field datatype is text .
Thanks
Al