Setup And Upgrade :: What Are DB Mirroring Trace Flags And How To Use
Sep 11, 2015What are the DB mirroring trace flags and how to use ?
View 4 RepliesWhat are the DB mirroring trace flags and how to use ?
View 4 RepliesHi ,
I want to trace the deadlock information. I am enabling trace flags 1204 ,1205. Is there any difference in setting these trace flags by using DBCC
TRACEON and by setting them at command prompt by statrting the SQL server with SQLSERVR command. Actually i don't want to bring the server down. I want the information to be logged to Error log. Any help is greatly appreciated.
If I issue a DBCC TRACEON (1205) from a query window from a client machine.. Does it continue to run when I close that connection (spid).
Is there a way for me to tell what traceflags are currently on?
Thanks,
Dano
To solve a problem I encountered with Restoring from Backups in 6.5, I had to install a hotfix and thereafter do the load using Trace Flag 3282.I need help on using the trace flag (syntax etc.) Also there is no mention in books online of this particular Trace Flag.
Please help.
I see only a few trace flags and their description in BOL but see a lot of references to various flags like: 1211 and so on... Where can I find all the flags and their descriptive actions?
Thanks, Vinnie
Have Trace Flags changed in SQL Server 7?
I need to use T204 because of getting error:
'ORDER BY items must appear in the select list if SELECT DISTINCT IS USED'
when I try to compile stor proc.
I entered T204 as startup parameter and restarted server
but doesn't seem to work.
Any experience with that?
Thanks
To get deadlock victim alert do we need to turn on deadlock trace flags or if I create an alert and if there's any deadlock incident happen, it will throw alert (if no deadlock flag is set)?
View 4 Replies View RelatedWe have the following trace flags present in startup in SQL server 2000:
809
1204
3605
3913
Need to understand if these should be required in SQL Server 2005 + SP2 version. I have run the upgrade advisor tool which indcates that the behaviour of some flags has changed and some other TFs are no longer applicable. Hence, I want to know about the above mentioned TFs.
Regards,
Chetan
I need to enable trace flag
OPTION(QUERYTRACEON 9481)
In one of my views I am having trouble finding where to put it in my existing statement:
USE [pec_prod]
GO
/****** Object: View [dbo].[PEC_Claim_Export_All] Script Date: 8/10/2015 9:18:26 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER VIEW [dbo].[PEC_Claim_Export_All]
[Code] ....
Msg 156, Level 15, State 1, Procedure PEC_Claim_Export_All, Line 56
Incorrect syntax near the keyword 'OPTION'.
During a newly set up on one of our SQL server 2012:
We had enable the trace flags 1117 and 1118 as a good practice using DBCC TRACEON(1117,-1) and similar for 1118.
We have been base lining the server and it came to notice that trace flags are no more enabled.
Property               Value                              CaptureDate
DBCC_TRACESTATUSÂ TF 1117: Status = 1, Global = 1, Session = 0 Â Â Â 2015-10-20 00:00:00
DBCC_TRACESTATUS Â Â Â Â TF 1118: Status = 1, Global = 1, Session = 0 Â Â Â Â Â 2015-10-20 00:00:00
After reboot:
Property                 Value                                  CaptureDate
DBCC_TRACESTATUS      No trace flags enabled             2015-10-21 00:00:02.340
What can be the reason? What can be done to turn them on permanently, if its actually a good bet in enabling so.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Prepare to setup DB mirroring. Three MS 2003 servers. Two SQL 2005 standard edition as partners and one SQL 2005 Express as witness. Question:
1. Servers are under workgroup (not domain user). Is it ok to use local service account to run DB engine service on all three machine? Is SQLServerAgent service required when setup mirroring?
2. If SQL Server is running as a local service, Do I have to manually create certificates before setup mirroring?
3. After create certificates, can management studio be used to create endpoints on all three machines? If yes, how to select certificates that have been created? If no, can management studio be used to setup mirroring after endpoints have been created?
After going through the Enterprise Manage mirroring setup, I get the error message ...
The server network address "TCP://MYMACH.mynet.net:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
I have three instances of SQL Server 2005 Enterprise Edtion
MSSQLSERVER (primary) endpoint 5022
MSSQLSERVER (partner) endpoint 5023
MSSQLSERVER (witness) endpoint 5024
I have enabled TCPIP and named pipes on all three protocols.
In surface configuration I have enabled everything.
Each instance has the -T1400 flag set.
Each instance is running under mixed security.
Each sql Server and sql agent instance runs exactly in the same domain account.
The machine has been rebooted.
The following tests all pass
telnet MYMACH.mynet.net 5022
telnet MYMACH.mynet.net 5023
telnet MYMACH.mynet.net 5024
This problem happens both with Enterprise Edition and Developer Edition.
Any ideas?
AIM
Is database mirroring compatible between SQL Server 2005 (Standard Edition) SP1 and SP2? I currently run SP1, and will shortly be introducing a failover partner. I'd like to have the failover partner installed as SP2, start the mirroring, manually failover, then upgrade the existing server to SP2 as well.
Is this a supported upgrade method, or will I need to upgrade the existing server to SP2 before setting up database mirroring? The SP2 installation instructions and readme file don't appear to mention mirroring at all (at least not that I can find).
Many thanks for any assistance.
Hi, I'm having an issue setting up Database Mirroring. The environment here could be an issue.
I'm trying to set this up using 2 different servers both are SQL Ent Edition SP2, windows 2003. I'm not using a witness at this time. The 2 servers do not belong to a domain. They are both in workgroups.
I can setup the endpoints and everything up to the point just before I start mirroring. The issues happen when I go to start mirroring. It gives me a nasty error "please use a FQDN to establish the endpoints. The problem here is I don’t have any FQDN for these servers since they're in a Workgroup.
So, my question here is and I haven't found anything stating that you can't set up mirroring in a workgroup environment but is it possible? I'm assuming since its yelling at me for a FQDN that I can't. Is there any other ways to implement mirroring without a domain?
Thanks for your time, help!
Hello room,
I am newbie to Database mirroring.
I have 3 window server 2003 running in window virtual server 2005.
Server1 of sql 2005 instance:
-- SQLDev01
Server2 of sql 2005 instance:
-- SQLDev02
Serve3 of sql 2005 instance:
-- SQLDev03
The servers are running on DC and the sql servers was setup with Window authentication mode only.
Also, All the sql instances'services are running under single domain user name.
e.g: sqladmin.
I have tried to setup manually and t-sql and both running into some issues.
Can anyone help and share t-sript to setup database mirroring.?
Thanks for the help.
TJ
when i try to establish mirroring with the below command i am getting an error..
alter database SharePoint_AdminContent_c32bc-190-4-b1-1cab
set partner = 'tcp://mirror-server.3000';
go
the error :
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '-'.
i am not sure why it's throwing an error..any help would be appreciated...
thanks
Hi:
I am looking for a Step-by-Step document for setting up and configuring of database mirroring if one is available. I have gone through BOL and found some related documentation but want to see if a step-by-step document is available. If so can any one please direct me to the resource.
Thank you
AK
Would anyone have a suggestion on how to setup a partner to partner NIC configuration for heartbeats/mirroring traffic? I've been told this is the recommended setup but have not found much on how to do it. We currently have a teamed NIC config for redundancy, but would like to have a separate set of NICs on each partner so that mirroring traffic is not interrupted by any regular network traffic.
We also have a witness running in full safety mode. Does this mean partnerA and partner B both need NICs with a crossover cable between them AND is it recommended for the witness to also have extra NICs to both partnerA and partnerB (w/ crossover cables)?
Any suggestions/help/links on properly configuring this would be appreciated.
I'm setting it up using the directions provided by Microsoft @
http://msdn2.microsoft.com/en-us/library/ms189047.aspx
The problem I originally ran into was exactly like the one mentioned in the
following posting:
http://www.microsoft.com/technet/community/newsgroups/managed/dgbrowser/en-us/default.mspx?&query=mirroring&lang=en&cr=US&guid=&sloc=en-US&dg=microsoft.public.sqlserver.clustering&p=1&tid=95381f96-a34a-4d99-9e31-12719452a11d
I found an article online stating that this can occur of your principle
backup wasn't restored to the mirror server in NO RECOVERY mode. I missed
that step when performing the first restore, so i deleted that database and
started over using the NO RECOVERY option on the mirror restore.
The problem I've run into now is that after my restore executes and
completes, the database remains in a (Restoring...) state and never becomes
accessible.
Anyone know what causes this?
Thank you,
- Tyler
I have a 2 node cluster having 4 cores each wherein having 3 instances of SQL 2008 R2 enterprise comprising of 60 databases, 20 on each instance. I need to setup mirroring for each of the databases to a secondary server having 4 cores and 3 instances.
What i understand is that in this case the mirror server will be providing max of 512 worker threads and the 60 mirror databases would consume 240 threads.
What all needs to be checked for looking into the feasibility of going ahead with a async mirror setup as mentioned above.
We have a database. It is enabled for mirroring. We need to delete the old records. That is around 500k records from a table. But it has foreign key relation. How to do in Production servers these kind of deletes?
View 2 Replies View RelatedWHY master, msdb, model always seem to be on the " C " drive ....
View 4 Replies View RelatedMy SQL Server has one MDF file and  3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.
I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.
I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
View 4 Replies View RelatedI am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server.Â
What should i do when i only want that application to use the database?
And so that you can only connect to the database from the same computer as the SQL server?
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
C:Program FilesMicrosoft SQL Server100ToolsBinn;
C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program FilesMicrosoft SQL Server120DTSBinn;
C:Program Files (x86)Microsoft SQL Server120DTSBinn;
[Code] ....
Can I delete all variables related to older versions safely without any issue.
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies View RelatedI am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
View 8 Replies View RelatedI'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.