when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 RepliesDuring the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning
Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.
Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedI'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433
View 14 Replies View RelatedI ran into problem while trying to install SQL Server 2008 to join to another node in a failover cluster ,you will find here the configuration doc and installation details. URL...
View 4 Replies View RelatedI am trying to install fail over cluster for SQL and getting the below error message  :
I am using domain admin account to do the installationÂ
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies View RelatedI have a very strange problem when I try to install SQL Express 2014 on 1 PC on my network.
The setup is blocking on the step "rules of functionnality" (I hope it is the good translation ...).
I ha ve a message that indicates that there is a problem the following checking : "It exists a Internet connection with the download center for Microsoft Framework 4.0". At the beginning I had Framework 3.5 and 4.5 installed on the PC.
When I tried to install manually Framework 4.0 I had a message that indicated that the setup was not possible because there was a Superior version. So I uninstall v4.5 and install v4.0 normally.
I run again SQL 2014 Express setup but I have always the same error. I take a look on Internet to look for the same problem but I found nothing.
I am setting up my first sql node on a 2 node cluster and runing into this
The disks are already added into the failover cluster manager
I appologize if I am posting this msg twice (newby), but I am getting this error msg in the app log.
MS DTC setup failed to populate the shared cluster
registry. The DTC resource will not be able to come
online.Error Specifics:
d:srv03rtmcomcomplusdtcsharedmtxclumtxcluse
tuphelper
.cpp:120, CmdLine: "C:WINDOWScluster
esrcmon.exe" -e
1208 -m 1212 -p 2132, Pid: 3636
Have anybody seen this msg and any ideas on what to do in this situation? Your timely assistance is much appreciated. Thanks,
Is there a way to extract only installation files to install SQL 2012 client tools from complete media set. I'm interested in SQL MGMT Studio/Profiler/Data Quality services/Configuration tools.
View 2 Replies View RelatedI have an existing, licensed installation of SQL 2008 R2, with one database instance.  I need to add a second instance, but do not currently have access to the installation media.  Can I use the Microsoft® SQL Server® 2008 Enterprise
Evaluation: Trial Experience for IT Professionals installer that's available for download from the Microsoft download site?
I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is (1067) The process terminated unexpectedly.
  Â
   <Failure Type='Fatal' Error='1067'>
   <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>
   CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
   05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
  Â
[code]...
Having an issue updating SQL Server 2012 RTM Standard  to CU3.I'm getting the following error from the Detail log on each try: "Error: Failed to run patch request for instance: MSSQLSERVER (exit code: -2061893565)"I've tried rebooting the server, ensuring the user running the installer is a local admin account, ran the repair wizard on the SQL install...Nothing seems to work.I have two identical servers, the first has gone smoothly, this is bugging me...
Server: Dell R720XD, Dual E5-2643 CPU, 64Gb RAM, Windows Server 2008 R2 Enterprise x64, SQL Server 2012 RTM CU2 x64 Installed.
Final result: The patch installer has failed to update the following instance: MSSQLSERVER. To determine the reason for failure, review the log files.
 Exit code (Decimal):      -2061893565
 Start time:           2012-09-17 16:25:32
 End time:            2012-09-17 16:28:41
 Requested action:        Patch
Instance MSSQLSERVER overall summary:
 Final result:          The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
 Exit code (Decimal):      -2061893565
 Start time:           2012-09-17 16:27:21
 End time:            2012-09-17 16:28:39
 Requested action:        Patch
[code]...
I can't install the SQL Server 2012 Express version with tools downloaded from [URL]
I'm getting the following error:Â
Error installing SQL Server Database Engine Services Instance Features
Could not find the Database Engine startup handle.
Error code: 0x851A0019
I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.
Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.
[URL]
Note: Visual studio is not installed.
Hi all,
I am trying to setup the cluster SQL server, say ServerA and ServerB. While I start the setup in ServerA, it prompts,
'Setup failed to start on the remote machine. Check the Task scheduler event
log on the remote machine.'
But I found that there is no remote logon to both nodes and the service task scheduler is running in both node.
On the other hand, I try to install the SQL via ServerB, it prompts for valid Native client package 'sqlncli.msi' and caused the setup failed finally. However, the Native client was setup successfully as a prerequisite once starting the setup.
Any advise? Thanks in advance!!
No logs created, this is all I have:
Â
Unhandled Exception: System.Security.SecruityException: Request failed.
        at Microsoft.SqlServer.Chainer.Setup.Setup.DebugBreak()
        at Microsoft.SqlServer.Chainer.Setup.Setup.Main()
Then the Managed SQL Server Installer box pops up with Managed SQL Server Installer has stopped working.
I'm trying in vain to upgrade sql server 2000 to 2005 with great headache and pain.
I (finally) have removed all Beta, and other incompatible version of .NET, Visual Studio and any other offending components, and made it to the first page of the install shield.
The .NET 2.0 components installed fine - but I get a fatal error trying to install the SQL Server Set Support Files.
I do have a log file - and have tired searching on the various error codes in it, but am coming up blank. Please advise - this is taking forever!
sample of error msgs in log file:
MSI (s) (B0:E0) [12:33:06:613]: Note: 1: 1935 2: 3: 0x8002802F 4: 5: CreateAssemblyNameObject 6: Microsoft.NetEnterpriseServers.ExceptionMessageBox,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"
MSI (s) (B0:E0) [12:33:06:613]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 2908. The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}.
MSI (s) (B0:E0) [12:33:06:613]: Executing op: ComponentRegister(ComponentId={52723CBD-3400-458C-988A-4D012E6CAEDB},KeyPath=<Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0",State=3,,Disk=1,SharedDllRefCount=0,BinaryType=0)
Error 2908. The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}.
MSI (s) (B0:E0) [12:33:06:629]: MSCOREE not loaded loading copy from system32
MSI (s) (B0:E0) [12:33:06:629]: Assembly Error:Function not defined in specified DLL.
MSI (s) (B0:E0) [12:33:06:629]: Note: 1: 1935 2: {52723CBD-3400-458C-988A-4D012E6CAEDB} 3: 0x8002802F 4: 5: CreateAssemblyNameObject 6: Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"
MSI (s) (B0:E0) [12:33:06:629]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 1935. An error occurred during the installation of assembly 'Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {52723CBD-3400-458C-988A-4D012E6CAEDB}
Error 1935. An error occurred during the installation of assembly 'Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {52723CBD-3400-458C-988A-4D012E6CAEDB}
MSI (s) (B0:E0) [12:33:06:629]: User policy value 'DisableRollback' is 0
MSI (s) (B0:E0) [12:33:06:629]: Machine policy value 'DisableRollback' is 0
Action ended 12:33:06: InstallFinalize. Return value 3.
mandpenny
When I install the SQL Server 2005 SP2 on my vista laptop, I get the following message: SQL server setup failed to compile te Managed Object Format (MOF) file c:program filesmicrosoft SQL Server90sharedsqlmgmproviderxpsp2up.mof. To proceed, see "troubleshooting an installation of SQL Server 2005" or "how to: View SQL Server 2005...
What did I wrong?
Greets,
Wouter
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
This forum is intended for users who are new to SQL Server, and have basic usage questions. If you have setup or installation issues or questions, you should check out the Setup forum.
Thanks
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
We are on SQL Server 2000 A/A cluster and are moving to SQL Server 2005 cluster.
Following are the list of things before proceeding, please let me know if it needs any corrections and add-ons:
(side-by-side) Planning for new installation of SQL Server 2005 ( SQL2005INST1 and SQL2005INST2) on node1 and node2 and restoring the databases on SQL2005INST1 and SQL2005INST2 from respective 2000 instances.
1) SQL2005INST1
SQL Network Name
SQL IP address
2) SQL2005INST2
SQL Network Name
SQL IP address
As 2000 is already existing on the cluster.Want some clarity on following questions.
Can I keep the data files on the same disk as 2000 was using ?
Do I need to have new disk for the Quoram drive?
Under "Virtual Server Configuration" wizard during the setup under "Network to use"--- for "private cluster network" and "public cluster network" do that IP Address and network address and network subnet will be different from what we gave for SQL 2000.
Thanks
ITTECH
Have recently performed an in-place upgrade of a 2 instance sql cluster from 2000 to 2005. The upgrade process went relatively smoothly. However, I am running into problems installed sp2. The first problem that I run into is that I have resrcmon.exe locked. I can click next, which is fine, but once I get past that point I get stuck during the installation process. I am updating DatabaseServices and Integration Services. It gets stuck on 'Awaiting first complete passive cluster node SQL-Test'. Does anyone have any ideas?
Thanks,
Tim
Hi There
I have upgraded many standalone sql server instances however never a cluster.
I have an active active 2 node cluster. Each running an instance of Sql Serevr , 1 default and the other a named instance.
All i can find in BOL is "How to: Upgrade to a SQL Server 2005 Failover Cluster (Setup) ", however this does not tell you how to upgrade and existing cluster.
Is there anything different ?
Will the upgrade detect the cluster and upgrade binary files on both nodes automatically etc? In other words is there anything different i have to be aware of when upgrading sql server instances cluster?
Thanx
Hi,
I have 2 W2K box's and want to install 4 SQL servers on each box & each different character set and want to setup clustering (Active - passive).
Do any one of you setup this type environment ?, Pl. let me know if you have any suggestions ..
Regards,
Madhu
am trying to install sql 2005 with cluster option in win 2003 R2
servers
and keep getting sql database setup failed error.Summary log show that
it failed with error number 67.
It doesn't even create a SQLSetup0004_M2MTPONE_SQL.log file. core log
shows
Complete: DetectLocalBootstrapAction at: 2006/5/1 18:15:31, returned
true
Running: LaunchLocalBootstrapAction at: 2006/5/1 18:15:31
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 67
Aborting queue processing as nested installer has completed
Message pump returning: 67
We have two machines in running enterprises version of R2 in a cluster.
I tried running the setup from both machines and got the same error.
I am trying to find a solution for more than week but no luck. Any
help is appreciated.
thanks - Kailash
Part of Summary log:
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0004_M2MTPONE_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : NEWTPNT1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : \M2MTPONEC$Program FilesMicrosoft SQL
Server90Setup BootstrapLOGFilesSQLSetup0004_NEWTPNT1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0004_M2MTPONE_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Error Number : 67
--------------------------------------------------------------------------------
Machine : NEWTPNT1
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Error Number : 67
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log
file in %ProgramFiles%Microsoft SQL Server90Setup
BootstrapLOGSummary.txt.
Time : Thu Jun 01 18:18:54 2006
Installing SQl2005 into on Win2003 2 node cluster, at the very end of the
setup receive a message 'Remote Setup failed'. Referred to some sql logs
and found this;
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603
I've seen some similar errors on the web and suggestions about the Task
Scheduler being started on both nodes, but I ensured these were both started
before the install. SQL2005 does seem to be ok on the node1 where the
install was made, but fails when trying to failover to node 2.
Any help would be much appreciated here.
Thanks
Darren