Setup And Upgrade :: No Mapping Between Account Names And Security ADs Was Done

Aug 26, 2015

Our software vendor rep is trying to upgrade MS SQL server 2008 SP4 to 2012 SP1. Get an error message: no mapping between account names and security ADs was done. He says that we get this error message because we have two domain controllers in our network, and one is running on the same windows server that run sql server. Out IT support disagrees to delete the second domain controller, saying it is recommended by Microsoft and he suggests that the problem is in Active directory.

View 2 Replies


ADVERTISEMENT

No Mapping Between Account Names And Security IDs Was Done.

Jun 7, 2006

I received the following when trying to deploy an 2005 analysis services package over an existing database:

The following system error occurred: No mapping between account names and security IDs was done.

We have redeployed this solution several times over the last week and have never encountered this error. The changes that we are deploying are related to partitioning of the measure group fact tables - and are not related to security in any way. Can someone assist?

View 1 Replies View Related

Urgent - No Mapping Between Account Names And Security IDs Was Done Error !

Feb 28, 2007

Hi There

When i go to configuration manager and change the sql server service to run as a domain account i get the following error:

No mapping between account names and security IDs was done.

This is Sql Server Express running on a domain controller - Windows Server 2003 R2.

Everything i find ont he net refer to IIS, DHCP etc etc , i cannot find the issue regrading sqls server configuration manager.

Thanx

View 13 Replies View Related

SS2000 Error: No Mapping Between Account Names And Security IDs Was Done

Oct 25, 2007

Hello all;

I am trying to form a replication system but at the very beginning i couldn't pass an obstacle.
While trying to create the Replication it says i have to change the user which starts the SQL Agent because the current starter user account is a system account and this will make the replication between servers fail.
"SQL Server Agent on OZN currently uses the system account, which causes the replication between the servers fail. In the following dialog box, specify another account for the service startup account."
I change it in the properties dialog box of the SQL Server Agent. The new account is the one I formed and granted accordingly. But it gives the following error when I try to apply the changes.
" Error 22042: xp_SetSQLSecurity() returned error -2147023564, 'No mapping between account names and security IDs was done' "

I tried many things, searched in the net, changed the owner of the database, applied new accounts, many grants, applied service pack 4, etc...

If anyone helps it will be very much appreciated. Thanks in advance...

View 3 Replies View Related

No Mapping Between Account Name And Security ID

Jul 4, 2007

Hi,I created a user account on my active directory service. I then triedto assign a service located on my SQL server to be executed by thisaccount. However, when I try to configure my SQL server service, Iget the following error message:WMI Provider Error"No mapping between account name and security ID was done"Do you know what I am doing wrong?thanks

View 1 Replies View Related

Setup And Upgrade :: Error Setup Account Privileges

Nov 15, 2015

I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop.  When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7.  How do I get around this without having to resort to a computer running Windows Server?

I have Visual Studio 2013 premium installed along with Localdb v11.  I just want to connect and manage my database engine through SSMS when developing any application.

View 2 Replies View Related

Setup And Upgrade :: Unable To Register SPN Using Domain Service Account 2012

Jul 23, 2012

I am working with a client who is rolling out 50+ VM's based of a template we created.  This is SQL 2012 CU1 running on Windows Server 2008 R2.  Using the default service account the installer has it registers fine and we get the following in the SQL log.

The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service.

When we change to a domain service account through SQL configuration manager we see the following and cannot connect remote using integrated authentication The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service. Windows return code: 0x2098, state: 15. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.

My understanding is you should and could change service accounts using the SQL Server Configuration Manager and it would set all permissions.  Is there something we need to do in addition to get this up and working?

Convert DTS to SSIS |
Document SSIS |
30+ SSIS Tasks |
Real-time SSIS Monitoring |
Quick Starts |
BI Blitz

View 9 Replies View Related

Setup And Upgrade :: Use Powershell To Output Database Names On Old Server On Text File?

May 28, 2015

I've been asked to create a new SQL server and restore an old server's DBs to the new server.

I'd like to generate a list of the DB names using powershell to distribute to their creators, in case some of these DBs are no longer needed.

View 2 Replies View Related

Setup And Upgrade :: 2008 R2 Setup UI Has Incomplete List Of Installed Features - Can't Uninstall RS

Jul 23, 2015

We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page.  In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.

View 3 Replies View Related

Disable Auto Mapping By Matching Column Names?

Sep 19, 2007

Hi,

If you use a component that has a column mapping tab (most do) then you know that the component will try and map input and output columns automatically by name.

Is there a way to disable this feature when writing your own custom components? There is already a manual way to do this: rightmouse in the mappings tab of a component and chosen "Map Items By Matching Names". I find it is less helpful to auto-map initially because the designer tends to not think about the mappings.


A way of turning of auto-mapping in existing components would be cool too!

Cheers,
Martin

View 3 Replies View Related

Setup And Upgrade :: One Machine 6 IPs - How To Setup DNS For Server

Apr 24, 2015

I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:

MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2

If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.

View 3 Replies View Related

SQL Security :: Mapping AD Groups To Certain DBs

May 10, 2015

I am using Windows server 2012 Standard R2 and SQL Server 2014 Enterprise. I have created three AD Groups and added the groups to the SQL server:

Group A. Group B, and Group C. I have mapped each group to their database which I created on the same SQL server.

Now I have Group A mapped to Database A, Group B mapped to Database B, and Group C mapped to Database C.

Now all the users in all the groups can see each other databases, I need to give full permission to Group A for ONLY database A and NOT to allow them access Database B and C, also I need to do the same thing for the other two groups, this means each group can only access their database and not allowed to access other databases.

View 8 Replies View Related

Setup Of Security / Integrated Win Security On Vista

Jul 6, 2007

I have Sql Server Express installed on Vista (service pack 2)

I have Visual Studio 2005 with an application that I'm trying to access it with within a WCF service.



The login ID of the service is added to the database.

The database has remote access turned on.

The ID is granted access to all databases within the server.

The thread is being set with WindowsProvider and the services set their thread to WindowsProvider.

The dataserver is set with using Windows Authentication for security.



When I open my connection to the database, though, it reports the typically useless message that the connection is not allowed and that the server may not allow remote connections.



How to I get past this? I've done everything right.

View 1 Replies View Related

Service Account In Setup

Mar 25, 2008

On the screen "Service Account" during SQL 2005 Developer Edition, I am choosing built-in System Account = Local System and uncheck the Customzie for each service account. that means, that this system account is set to all services,

Right?

please refresh my memory on this.

Thanks,

View 1 Replies View Related

SQL Server 2008 :: Must Setup Be Run With A Domain Account?

Nov 6, 2015

I am running a SQL 2008r2 install while logged onto the server with a local admin account, not a domain account. I am specifying a domain account to run the SQL service. The install fails saying the service account credentials are invalid but I am 99.9% sure they are right.My theory - the local admin account running Setup cannot validate the service account creds against AD. Is it a requirement to run Setup while logged on with a domain account?

View 4 Replies View Related

SQL2K CmdExec Proxy Account Setup

Aug 15, 2007

Hi, I have the following setup:

- Win 2K Server, SP4
- SQL Srv 2K, SP4
- A 'DEV' domain, with an 'Administrator' account with all possible rights on the system

I need to configure a CmdExec proxy account in order to allow non-sys-admin users to execute the master.dbo.xp_CmdShell procedure.

When attempting to do this via QA as follows:


EXEC master.dbo.xp_sqlagent_proxy_account N'SET',
N'DEV', -- agent_domain_name
N'Administrator', -- agent_username
N'password' -- agent_password

...I get the following error:


"The system cannot find the path specified."



When attempting to do this via QA as follows (note: only change is adding domain to agent_username arg):


EXEC master.dbo.xp_sqlagent_proxy_account N'SET',
N'DEV', -- agent_domain_name
N'DEVAdministrator', -- agent_username
N'password' -- agent_password

...I get the following error:


"Error executing extended stored procedure: Specified user can not login"




I have tried this through Enterprise Manager and get identical results, of course.

I have also tried all of the following:
- different OS user accounts, including local system accounts with local admin rights;
- assigning the OS account to a SQL login with System Admin role/rights;
- specifically assigning the above SQL login with EXEC rights on the master.dbo.xp_CmdShell procedure;
- verifying local security policy settings, as per the following link: http://support.microsoft.com/?id=283811;
- pulling out my hair and banging my head against the wall.

Can anyone H E L P ? ! ! !

Thanks,

Joe

View 6 Replies View Related

What Is Security Account Delegation (was Hi)

Feb 26, 2005

can any 1 give info on "Security Account Delegation"


thanks in advance

View 1 Replies View Related

Service Account And CLR Security

Aug 6, 2007


By default does CLR code run under the SQL Service Server account or the SQL Agent Service Account? Does anybody have a link to BOL or MSDN???

My assumption is its under SQL Server Service Account.

I'm trying to satisfy the DBA's security concerns in regards to CLR Code. If the account it runs under (Agent or service) has zero privliges will a dba still be able to maintain the server? Wouldnt all their backups work under a privilaged account that isnt the SQL Server Service Account?


Double posted in security.

View 6 Replies View Related

SQL Security :: SPN Account On More Than One Instance

Oct 28, 2015

Can you use a SQL service account (domain account) on two different SQL instances?

Can you set the SPN for both clusters instances with the same account?

View 3 Replies View Related

Security Account Delegation

Oct 22, 2006

Hi world,

I have a question, but first I need to give you some background:

My network works with Active Directory on Windows 2000, and I have web servers running on windows 2003 and SQL Servers 2000 running on Windows 2003.

I wanted to enable account delegation and I found a bunch of information.

Everything seemed "easy", but I tried to test it first on my test servers anyways and this is what happened:

We created the SPN for the SQL Server
Account is trusted for delegation check box  was selected for the service account of SQL Server.
Account is sensitive and cannot be delegated check box was not selected for the user requesting delegation.
 But when we checked the box Computer is trusted for delegation (and only this box !!) in the server running an instance of  SQL Server 2000, the role of this server changed magically (just like this guys, it was magic) from "server" to "Domain Controller".

We were intrigued about this change, but we "trusted" the white paper that we had in front of us.

http://support.microsoft.com/kb/319723

After some hours, the production web servers (of the whole network) and many workstations stopped working:

The IIS on this web servers will show an empty list of websites 
The network and dial-up connections were missing on the web servers and also on the workstations.
The web servers and the workstations affected were "isolated" from the network, the command ping was not finding any of this computers.

Anyway, it was a nightmare, it took a while to fix the mess, we reverted the changes in Active Directory, and this makes me thing that the magical "promotion" of the SQL server to Domain Controller had to do with all this.

the questions is:

Do you have an idea about what could have caused all this? I mean, I still need to enable this account delegation thing. But I would like to know first if someone has done it before in a similar environment or if someone has run into one of the problems described before.

Thanks world.

 

 

 
 

View 3 Replies View Related

Proxy Account Security.

Apr 26, 2007



Hi experts,



Is there any potential security threat using Proxy accounts in SQL Server 2005 ? If any , Please give URLs for reference.



Thanks,

DBLearner

View 3 Replies View Related

Cannot Setup SQL Server 2000 Service Account During Installation

Sep 1, 2004

Hi, i tried to install MS SQL server 2000 in my XP system but during the setup service account installation, i tried to use a domain user account but it cannot validate my user name and password. I used my windows administrator logon account and password. Please help..thank you.


Thanks : :confused:

View 6 Replies View Related

Security Login Account Restore

Oct 25, 2007



Hey Everyone,

I am testing restoring databases on another SQL 2005 server in out environment using HP data protector 5.5 and its great. However, I notice that the security login accounts do not get restored. If this is the case how do I go about getting accounts restored? Also, are there any other options?

Cheers,

Mark

View 3 Replies View Related

Security Problem Running Xp_cmdshell From Non-sa Account

Dec 17, 1999

Our system is MS SQL Server v7 and NT 4. We have a stored procedure that exec's xp_cmdshell to run an external program located on the server. When a user who has 'sa' rights runs this stored procedure it works fine. When a 'non-sa' user (via the "BuiltinUsers" NT account) runs it, xp_cmdshell produces the following error:

Msg 50001, Level 1, State 50001
xpsql.c: Error 1385 from LogonUser on line 476

Is there an NT security or SQL Server setting I've overlooked that can be changed to allow non-sa users to xp_cmdshell programs?

n.b. The BuiltinUsers account does already have execute permission on the xp_cmdshell procedure.

View 3 Replies View Related

Error Message Web Service Account Not Setup How Do I Set One Up On Local Computer, Just For Training

Jan 31, 2008

Help, Had configuration error trying to set up reporting services. Uninstalled SQL Server and Reinstalled, but not all files were removed. How many files and directories do I have to remove to get Reporting Services to work?

Thanks!
Terry<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>Central Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_01_31_2008_16_16_12.log</Path>
<SystemName>JPADESKTOP1</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!configmanager!4!1/31/2008-16:16:12:: w WARN: WebServiceAccount is not specified in the config file. Using default: JPADESKTOP1ASPNET
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-16:16:12:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!servicecontroller!9!1/31/2008-16:16:13:: Total Physical memory: 1055309824

View 1 Replies View Related

Mapped Names In Security Manager

Jul 21, 1999

Hi,

I am trying to grant users permissions to our database, but when I add the users through a local group, I receive a mapped name of DOMAIN_USERNAME.

We are using standard security, with the SSQL server in a resource domain. I have created a local group with the global group inside it from the accounts domain. This seems usual MS practice to me.

We do not want these long cumbersome login names, but I am slowly worrying that there may perhaps be no way around it. Can't they just login with their normal username?

Any light...
Jack.

View 1 Replies View Related

Security Setup

Dec 16, 1999

We are working on a new Payroll server. Our payroll department wants to lock out MIS and SQL Admins as much as possible. What we would like to do is allow the SQL Admins to still perform admin tasks such as backups, audit tracking, etc, while not being able to get into the tables. Also, we would prefer to do this security at the database level, rather than the server level. Any thoughts on this?

Tim Davis

View 3 Replies View Related

Setup And Upgrade :: WHY Master On C Drive

Oct 27, 2015

WHY master, msdb, model always seem to be on the " C " drive ....

View 4 Replies View Related

Setup And Upgrade :: Splitting MDF And NDF File?

Jul 20, 2015

My SQL Server has one MDF file and  3 NDF file - all almost 100 GB/file. It's leads the disk space almost fill.

I want equal distributed - splitting the MDF and NDF file to 10 or 15 files. So it will solve my space issue.

View 3 Replies View Related

Setup And Upgrade :: Cannot Connect To WMI Provider

Jul 23, 2015

I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog

ram Files (x86)Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041003

Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.

View 2 Replies View Related

Setup And Upgrade :: Way To Get To SSIS Or SSAS

Apr 23, 2015

So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.

View 4 Replies View Related

Setup And Upgrade :: Allow Only Connection From Same Computer

Jul 17, 2015

I am about to install SQL Server 2012. I have a server with IIS. There is a web application that uses the sql server. 

What should i do when i only want that application to use the database?

And so that you can only connect to the database from the same computer as the SQL server?

View 6 Replies View Related

Failure Setting Security Rights On User Account SQLServer2005BrowserUser${computerName}

May 29, 2007

I'm trying to install SQL Server 2005 Express on a Windows 2000 server, but I'm getting the following error message:



"Failure setting security rights on user account SQLServer2005BrowserUser${computerName}"



Can anyone help me please?



View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved