Setup And Upgrade :: Won't Be Able To Revert Back To Original Settings
Jan 7, 2010
What's the diffrence between the Built-In account 'SERVICES' and the 'NT SERVICEALL SERVICES' ?I want to dploy a group poicy for 'user right assignment' - 'log on a service' to a server, which curretnly has among other things the 'NT SERVICEALL SERVICES' however i can't replicate this account for my GPO, (even locally on the server),I deploy the GPO and overwrite the server settings for 'user right assignment' - 'log on a service' and won't be able to revert back to the original settings..
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
I am trying to enable FILESTREAM on a SQL 2012 installation that is supporting a Sharepoint 2013 implementation. When I try to enable FILESTREAM using the SQL Server Configuration Manager I receive the following error:
There was an unknown error applying the FILESTREAM settings. Check the parameters are valid. (0x80041008)
I have done this succussfully in the past in SQL2008R2/Sharepoin2010 environment but this is my first attempt with SQL2012/Sharepoint2013 and I am not sure how to proceed with troubleshooting.
I am working on a project that contains several databases in SQL and many settings. The problem I am encountering is that I want to be able to update the program for all my customers. That is no problem.
The problem I am meeting is where, when the program is updated, all the settings and all the information in the databases reverts to the default values, or the values that were compiled with the new update.
I want to be able to update their program without deleting all the settings they have.
When I drill down from one report to another and then depress the back button to return to the initial report, the message 'Generating Report" spins forever without actually running. However, if I depress the regenerate button during this time, it will run the report.
I believe that I may have inadvertingly reset a field attribute to have caused this condition. Ironocally, I have the same set of database installed on another server, and the this does not happen.
I forgot to mention that I am using Report Manager to deploy the reports.
When I drill down from one report to another and then depress the back button to return to the initial report, the message 'Generating Report" spins forever without actually running. However, if I depress the regenerate button during this time, it will run the report.
I believe that I may have inadvertingly reset a field attribute to have caused this condition. Ironocally, I have the same set of database installed on another server, and the this does not happen.
I forgot to mention that I am using Report Manager to deploy the reports.
I cannot open now my database after changing it name from the folder where it is save and also changed back to its original name.Message recovery pending now is appearing as shown below.Any chance that I could recover my database back?
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1 MSSQL2012 is set to run on = 11.12.13.2 IN DNS: A Record: Mike-PC = 11.12.13.1 A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Just upgraded a users computer from 7.0 to 2000. All previous SQL Server Registrations are gone IP Addresses, User Names and Passwords arent readily availiable. Are the old connections stored in a DLL or Ini that I can place in the SQL 2000 folder to regain those or do I need to recreate some DSNs?
Can the template.ini be setup to upgrade a previous version of MSDE if it exists or just install it if it does not?
I currently have ADDLOCAL=SQL_Engine and UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER in the file but that does not seem to do it if the server does not exist.
Am I going to have to create two seperate ini files and tweak my install program to select the specific one or am I missing a simple step?
I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
I am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
If I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?
I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.
Microsoft SQL Server Management Studio 10.0.1600.22 ((SQL_PreRelease).080709-1414 ) Microsoft Data Access Components (MDAC) 6.1.7601.17514 (win7sp1_rtm.101119-1850) Microsoft MSXML 3.0 6.0 Microsoft Internet Explorer 9.11.9600.17041 Microsoft .NET Framework 2.0.50727.5485 Operating System 6.1.7601
We setup a new Shared SQL server 2014 Web and transferred all SQL databases over. However when customers connect via SQL Management Studio they now get VIEW STATE error when right clicking on any table on any database.