Hi,
I want to setup my report in landscape format.
How do I do it?
I have altered the report margin in report properties.
However if we export the report to PDF €“ still goes to portrait format.
Even though in pdf itself I have changed the print setup to landscape, but it doesn€™t change anything.
Can anyone give suggestion?
Thanks,
Susan
Hi all,
I am designing a lable which in 4 inch by 1 inch lanscape style, i setup the width and heigh and interactive width and heigh correctly ( width 4 and heigh 1 inch). When I export this report from report viewer and report mangement to PDF file, there is no problem, the PDF file is in correct lanscape format, however, when I print this label directly from the report viewer and report management, it printed as Patraint!
It is so strange, please help.
Thanks
Micror
Hi All,
I'm new to SQL Reporting service. some how i tryed to manage and create reports. I have a small question. when i start creating report i wanted to change the orientation of report from Potrait to Landscape so i can get a bit more space. i can see report getting expanded as we keep working. but when i tryed to export to Acrobat PDF, the content getting into next page insteed in same page. to over come this issue i wanted to generate report with landscape orientation, i have seen this kind of option in Crystal report, but i dont know how to make the same in this report.
Design a report by setting the layout with:
width = 8.5 in
height = 3 in
By default, the page orientation will set to "landscape"
Is there anyway to code it and make the page orientation to "potrait"?
thanks for the reply.
Hello,
I have a need to present a different orientation of data, and I would normally do this with CASE. I've tried to go that route in this instance, but it hasn't worked.
The following query expresses the data as it currently is:
SELECT TOP 10
Prod,
Acct,
TC,
SubmitRep1,
SubmitRep2,
SubmitRep3,
Percent1,
Percent2,
Percent3
FROM
dbo.tbl_CYProcessedSales
WHERE
Proj IN (100,200)
AND Percent1 < 80
AND NOT SubmitRep3 = ''
AND Prod = 'RETA'
The result looks like this:
Prod Acct TC SubmitRep1 SubmitRep2 SubmitRep3 Percent1 Percent2 Percent3
RETA PA0065 T2 OJOYNER CAPARRSH SBEVERLY 34 33 33
I need for the result to come out like this:
Prod Acct TC Rep Percentage
RETA PA0065 T2 OJOYNER 34
RETA PA0065 T2 CAPARRSH 33
RETA PA0065 T2 SBERVERLY 33
Do I want to use CASE here, or a cross join?
Thank you for your help!
cdun2
How can I set the page orientation to landscape? I tried to set "printDocument.DefaultPageSettings.Landscape = true;" but it didn't work. I have spent hours fixing the problem but I couldn't get it work. Below is the code:
private void printDocument_PrintPage(object sender,
System.Drawing.Printing.PrintPageEventArgs e)
{
e.HasMorePages = false;
printDocument.DefaultPageSettings.Landscape = true;
System.Drawing.Font printFont = new System.Drawing.Font("Arial",
12, System.Drawing.FontStyle.Regular);
e.Graphics.DrawString("Set the page orientation to landscape!", printFont,
System.Drawing.Brushes.Black, 30, 30, new StringFormat());
}
Could someone please tell me what is wrong with it, or what I should do to get it work? Your help is very much appreciated.
Thannks.
Tweaking a report that was imported from Crystal Reports. Report has three pages, the first two are landscape, the last page is portrait.
Can this be done in RS or will I have to split up the report to render the 1st two pages separately from the last page (in two reports)?
Thanks in advance.
My two cents worth: It would really really be nice if RS had 1.) a rich text box and 2.) the ability to rotate labels and text boxes.
Hello.
I have a report but by default it prints Portrait and 1.0inch Margin. I would like to programmatically set the values of my report to 0.2 inch margin and Landscape. I am using RDLC (Local Report).
Does anyone has an idea how to achieve this?
Jose
Hello,
I have a table with data laid out as follows:
Acct JanRev FebRev MarRev AprRev
BR549 150 125 175 180
I need to express the (x)Rev columns in a single Revenue column. Nornally, I would do this with CASE, but the column has to follow the current month of the year minus one month DATEADD(MONTH,-1,GETDATE())) and be cumulative.
For example, if the current month is March then:
Acct Revenue
BR549 150
BR549 125
If the current month is April then:
Acct Revenue
BR549 150
BR549 125
BR594 175
Any ideas on this?
Thank you for your help!
cdun2
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
This forum is intended for users who are new to SQL Server, and have basic usage questions. If you have setup or installation issues or questions, you should check out the Setup forum.
Thanks
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Hello everyone
I know this is discussed very often, but please indulge me.
I have two hardware/software configurations for the SQL servers,
(1) NT4 + SQL7 on 2HDD's (C/D-drive) and,
(2) NT4 + SQL7 on 3HDD's (C/D/E-drive).
What will be the best configuration for SQL regarding:
a. RAID,
b. placement of the OS,
c. placement of the data & log files(devices),
d. local(hdd) backups
Regards
George
Hello!
I`m new to SQL Server, so excuse this if it`s a well-known
problem with a well-known solution.
I tried setting up SQL Server 6.5 (the box but not the
docs or install claims it`s an
upgrade product) but the install hung at "Setup is now
installing the initial SQL Server configuration" for over
10 minutes. That is, the install kept processing
something but did not appear to be coming to an end until
I killed it. This happened repeatedly, and on a second
server, too.
I then installed 6.0 (over 6.5!), and was able to install
6.5 over 6.0. However, I`m not able to install the 6.5
docs.
SQL Server appears to run (although I`ve not tried any
DB stuff).
Any suggestions? Should I uninstall and start over?
best, paul
Hello,
This is the present setup.
Server A --> sql server 2000
Server B --> sql server 2005
On my machine I point to an instance name of sql server 2000 to use. i.e.
sqlserver2000Serverinstance1
On my local machine I have installed sql server 2000 and can use the enterprise manager. Have the Admin rights.
I have setup a daily backup job on sql 2000...
On server B, I installed sql 2005. Restored the sql 2000 backup onto sql 2005. And now I have the sql 2000 database in sql server 2005.
Now I can use the sql 2005 by refering to the serverB name (Not an instance).
In Server A, the applications are using a login name (sql authentication) i.e. username, password.
Questions
1) How do I install sql 2005 on my local machine (Remember that I have sql 2000)
2) If I should run the setup for sql 2005 on local machine, then during the installation, do I give it an instance name or should this instance name be done on the server i.e. server B ?
Thanks
Hi All
Iam new to SQL and using sql2000. I have created a DTS which works as I want, but I am abit concerned about the way set-up.
My source is a Lotus notes view and my data is going to a sql table. Now when I click in 'EM/DTS/MyPackage' and then rhs click 'design package' and look how the source is being extract after double clicking the source db I get a mini window labelled 'Execute SQL Task Properties'. In the bottom part of this window their is a line labelled SQL Statement. In here there is a syntax for creating a table, exactly the same as my created table ie. the destination table. I really dont understand why this syntax is appearing here.
Please can you help.
Many Thanks
Hi All
Iam new to SQL and using sql2000. I have created a DTS which works as I want, but I am abit concerned about the way set-up.
My source is a Lotus notes view and my data is going to a sql table. Now when I click in 'EM/DTS/MyPackage' and then rhs click 'design package' and look how the source is being extract after double clicking the source db I get a mini window labelled 'Execute SQL Task Properties'. In the bottom part of this window their is a line labelled SQL Statement. In here there is a syntax for creating a table, exactly the same as my created table ie. the destination table. I really dont understand why this syntax is appearing here.
Please can you help.
Many Thanks
I need help with SQL Server 2005 Setup.
View 1 Replies View RelatedHow would I set up a sql server database based on the following problem? I will be creating a poll based on 9 dimensions that compare two companies.
honda yamaha performance features reliability conformance durability serviceability aesthetics safety other perceptives
The values stored would be 1 or 0 so the values can be totalled. The user will be using a web pageand will select a radio button per dimension for either honda or yamaha. Would this work?
tbl_companiescompanyid int pkcompanyname varchar
tbl_resultsresultsid int pkp int --performancef int --featuresr int --reliabilityc int --conformanced int --durabilitys int --serviceabilitya int --aestheticssf int --safteyop int --other perceptivescompanyid int -- fk to tbl_companies.companyiduserid int -- fk to tbl_users.userid
tlb_usersuserid int pkusername varcharuserip varchar
I have an asp 2.0 app that connects to a database in another city.
When I test this app through VS2005 is connects and works great. After I created a web setup project it goes bad.
I ran the setup on 2 different computers, including the dev machine, both start ok and bring up the applications main menu, but when I choose a menu item that is supposed to bring up a datagrid from the sql server I get an error saying it's not a trusted connection.
Any advice on where I should start looking? It's got me beat.
Thanks.
Hi Everybody,
I was trying to install the SQL Server on my machine and I successfully did it because the server is running. I can get into the Enterprise Manager (without password) and I'm able to create new databases. Except, I can not log into those databases with the userid that I also created with full access. It must be somekind of security issue but I can not figure out what. The message says: "Unable to connect to server local - SQL server does not exist or access denied". If I look at my SQL service manager my server name is "NEWONE" , which is also my computer name. So, I'm not sure what's wrong. I tried to log in with the 'sa' account it doesn't work either.
I would appreciate any help you can give me.
Thank you,
Laszlo
I must install web applications on many servers
how can I create a MS SQL database at setup ?
thank you
Hi can you help me with this problem with msde
I have installed MSDE200A and i didn’t gave any password(setup BLANKSAPWD=1).
My configuration code for the connection with msde is:
<appSettings>
<add key="DSN" value="Initial Catalog=dyt_mac;Data Source=localhost;Integrated Security=SSPI;"/>
</appSettings>
When i try to connect with the database this error occurs:
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
Thank you!
hello everyone,it's first time for me to write here and also to use SQL.While i was installing SQl 2000 i got Setup Message said:" Microsoft SQL Server 2000 Enterprise Edition server component is not supported on this operating system. Only client component will be available for installation."Hope to know what's wrong, and please guide me.Thanks alot
View 6 Replies View RelatedHi all
I have a client application which is running winnt4 sp6, sql7 sp1, gives the following error.
Msg 18458, Level 14, State 1, Server Microsoft SQL Server, Line 0
Login failed- The maximum simultaneous user count of 5 licenses for this
server has been exceeded. Additional licenses should be obtained and
registered via the Licensing application in the NT Control Panel.
I have found in technet article no Q180364, which ask to rebuild the registry of sql server. Was wondering anybody had the same experience. I can't shutdown the server more than 30 mins.
Any guidence or suggestion ?
Thanks in Advance
Jaya.
I need to replicate a database which will be updated both sides.Table doesn't have the primary key,and already has data.Please advice which replication will suit and what are the limitations.URGENT!!
Thanks!
Hello all,
What is the hardware configuration for mssql 7.0 in order to achieve best performance. Some people suggest that
1. Dual Processors
2. 1G memory
3. RAID Controller
4. 2x9.2 GB RAID 1 for o/s and log files
5. 3x182. GB RIAD 5 for database
Your input is much appreciated.
Sui S
Ok I have installed SQL 7 on my NT4sp4/MIIS box.
Can someone please tell me how to add a SQL DB to my website? and can I do this remotely?
Amy
We are working on a new Payroll server. Our payroll department wants to lock out MIS and SQL Admins as much as possible. What we would like to do is allow the SQL Admins to still perform admin tasks such as backups, audit tracking, etc, while not being able to get into the tables. Also, we would prefer to do this security at the database level, rather than the server level. Any thoughts on this?
Tim Davis
Hi,
I'm trying to setup SQLAgentMail but received no message.
I have setup my SQL SERVER:
- using Domain Administrator to start SQL SERVER
- using Domain Administrator to start SQL SERVER AGENT
- created a mail profile called Test which has mailbox point to my domain user email account when I logged in my SQL SERVER machine as Domain Administrator
- setup Test as the mail profile in the Mail Session of the SQL SERVER AGENT PROPERTIES
I have clicked the Test button in the Mail Session and it return with the message "Successfully start (and stopped) a mail session with this profile."
But I don't get the testing email in my domain user email account.
Thank you in advance for any help.
I did setup to have a Desktop SQL Server running on Windows NT workstation in a different domain across the internet create a pull subscription to a transaction publication that is immediate updating that I have published on my NT SERVER in my domain. It never got any further than creating the subscription -- I got the following error on the pull:shared agent job history:
The job failed unable to determine if the owner (domainusername) of job
SQLServername-databasename-pubname-SQLServername2-databasename2 - 0 has server access (reason: Could not obtain information about Windows NT group/user 'othernameIdon'tunderstand'(SQLState 4200000) (Error 8198)