Several Different Errors When Creating And Running SSIS Package. Package Runs Successfuly Sometimes.
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
ADVERTISEMENT
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
Mar 13, 2008
Hi,
I need to transfer the data in A table on a 2005 instance to B table which has the same structure as A table on a 2000 instance. There are 200,000 records in A table. If I use <insert B select * from linkedserver.....>, it takes only 30 seconds. I create a SSIS package to do this. But it is very slow. After it runs 10 minutes I have to stop it. And I find that it transfers about 100 records every second. Then I change the source server and destination server. That is transferring the same data from the 2000 instance to the 2005 instance. It takes only 50 seconds. why? How to make the package used for transfer data from the 2005 instance to the 2000 instance run fast?
Thanks!
View 8 Replies
View Related
Mar 14, 2006
I have an SSIS package created from a SQL 2000 DTS using the Migration Wizard. The package imports data from a MySQL database to a SQL 2005 64-bit database running on 64-bit windows server 2003. The package runs fine when executed from SQL Server Management Studio but when I schedule it as a job it fails with:
Executed as user: [the domain admin account]. The package execution failed. The step failed.
I've tried a lot of different ways to make this work including creating a new SSIS package. Again, the package ran fine except when it was scheduled as a job.
Any ideas would be appreciated.
thanks!
View 20 Replies
View Related
Jul 10, 2006
When I run a package I created in the development Studio it runs fine but if I create a job and run it I get an error "The AcquireConnection method call to the connection manager "ODS" failed with error code 0xC0202009"
I have the package setup to use a XML config file and it works fine on all the other packages but this one will not work.
View 6 Replies
View Related
Jun 14, 2007
I have created an SSIS package which, as its 2nd step, picks up a .dbf table and does a Data Flow Task of putting the .dbf table into a SQL Server 2005 table (which was just truncated in Step 1).
The Connection Manager that works on the .dbf table is Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
The entire SSIS package runs perfectly when i run it from my development environment.
I then assigned this Package to a SQL Server 2005 Job. The entire package is the sole step of the job.
But when I run the SQL Job, the Job fails immediately on Step 2.
Here is the error message in View History of the SQL Job:
-----------------------------------------------------------------------------
Executed as user: DBASE01SQLExec. ...on 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:37 AM Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 0% complete End Progress Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 33% complete End Progress Error: 2007-06-14 11:48:37.91 Code: 0xC0202009 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2007-06-14 11:48:37.91 Code: 0xC02020E8 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: Opening a rowset for "scanus_process" failed. Check that the object exists in the database. End Error Error: 2007-06-14 11:48:37.95 Code: 0xC004706B Source: DBF to ScanUS_Process DTS.Pipeline Description: "component "ScanUS... The package execution fa... The step failed.
-----------------------------------------------------------------------------
Could someone suggest why this works OK within SSIS but not when the SSIS Pakcage is called from SQL?
thx very much/spirits.
seth j hersh
View 7 Replies
View Related
May 24, 2008
I am using SSIS packages for data transfer, When i run the package on virtual server it takes more time as when run on a PC. After analysing i found that Package when run on Virtual server takes time in startup around (50 sec) or so.Could anyone help me with a little bit of detail description as to why it runs slow.
View 10 Replies
View Related
Sep 12, 2007
I'm at a bit of a loss. I've written a package that has about a dozen data flow tasks and each one loads data from text files into tables in a db. It's possible that some of the fields in the text files may have data that would need to be truncated upon insert into the db.
In the data flows, I've set the fields in the data sources I know this could happen to to ignore truncation errors. When I run this within BI Studio, everything works fine. I then loaded the package into the SSIS store on the db server and if I attempt to run it from the SSIS store or if a job executes it, the package appears to be failing because of these truncation errors that I've told it to ignore.
Am I missing something? Thanks!
View 7 Replies
View Related
Dec 19, 2007
I have a problem where I have an SSIS package (SQL Server 2005) that won't run properly from SQL Server Agent, but it runs fine when kicked off manually from Integration Services -> Run Package or when run in debug from Visual Studio.
The first step in the package checks for the existance of a file via a script task. The script looks like this...
Code Block
Public Sub Main()
Dim TaskResult As Integer
Dim ImportFile As String = CStr(Dts.Variables("BaseDirectory").Value) + CStr(Dts.Variables("ImportDirectory").Value) + CStr(Dts.Variables("ImportFile").Value)
If Dir(ImportFile) = "" Then
Dts.TaskResult = Dts.Results.Failure
Else
Dts.TaskResult = Dts.Results.Success
End If
Return
End Sub
This script runs fine and the file is seen as expected when I run the package manually. But as a step in a SQL Server Agent job, it doesn't see the file.
The SQL Server Agent service is set to start up / log on as a Local System Account. I've also tried setting up a credential / proxy (using an account that I know can see and even move / rename the file) to run the job as but that didn't seem to help.
The package is being run from SQL Server (stored in MSDB) and is set to rely on SQL Server for sensitive information, so I don't think that's an issue; other packages are set up like this in terms of sensitive data and run fine.
Any ideas why my script can't "see" the file I'm looking at when it's kicked off by SQL Server agent? I've looked and looked...I can't seem to figure this out. I would really appreciate any help you might be able to offer up.
View 12 Replies
View Related
Jul 12, 2006
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
View 9 Replies
View Related
Apr 21, 2015
I've created a SSIS package that calls the access dll and fires off 2003 access reports, saves them as PDF's and emails them off.
Now this works fine when I run it manually, but when I schedule and fire off a job I get a very vague error "exception has been thrown by the target of an invocation".
I have copied the access dll to the GAC and .net framework v2.0.50727 but still no luck.
I'm using Bull zip PDF printer and those DLL's are also in the GAC
View 21 Replies
View Related
Jul 21, 2007
I am copying a simple table from a Sql Server 2005 database to an *.sdf mobile database.
I am brand new to SSIS and I am probably doing something wrong. But after executing the SSIS package all the rows and all the fields are NULL in the destination database. I put a datagrid viewer between the OLE DB Source and the Sql Server compact edition destination and I can see the real data which is obviously not ALL NULL.
Does anyone have a clue as to why it would be doing this?
Any help would be much appreciated.
Thanks...
View 1 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Mar 27, 2014
SQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started:Â 11:04:59 AM
Error: 2014-03-27 11:05:31.12
  Code: 0xC001602A
 Â
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
View 10 Replies
View Related
Oct 16, 2006
I got an SSIS package
that first "truncate the product table" then populate the table with new rows....if there is an error then i will invoke the send email task. However in the "truncate the product table" task, the sql i put "truncate dbo.product" instead of "truncate table dbo.product" but this error is not captured in the text file that I m going to send an email to the appropriate personnel.
Under logging, and when i go into "truncate product table" tasks , "Details", i saw "OnError", "OnWarning" and other error handlers...which should i tick in order for the text file to ONLY show errors I encounteered during the running of the SSIS package?
View 8 Replies
View Related
Jun 22, 2007
Hi folks,
I have a simple SSIS package I built to migrate data from a SQL db on one server to another SQL db on another server. All it does is: Execute SQL task to disable some triggers on the target table, Data Flow Task to pull the data from the source (a simple sql query) into the destination table (using OLEDB), then another Execute SQL task to re-enable the triggers.
This package ran fine several times during my testing. However, this morning it's not working anymore. When I run it and check its progress, the "Validation has started" is the only thing runs, then nothing else happens... no error messages, no timeouts, nothing in the output window besides "DTS.Pipeline: Validation phase is beginning".
The only thing that has changed is one change to a date in the where clause of my source query, so I'm baffled on why it no longer runs.
I'm pretty new to SSIS, so I could easily be missing something obvious here.
Anyone have any ideas on what's up, or who can point me in the right direction? I'm currently reading up on how to debug and add more comprehensive error handling, in hopes of finding a better description of the problem.
Thanks in advance,
Geoff
View 4 Replies
View Related
Feb 14, 2007
Hi All,
I hope someone can help becuase this problem is issue us several headaches.
We are currently trying to deploy an SSIS package to a production server. The deployment goes fine, the package runs ok when executed manually. The issues start when we try and execute it under the SQL agent.
Having gone back to the drawing board and spent much of the day reading various articles and applying the various options (especially those within the MS KB article 918760), we are still no closer to a resolution.
The SSIS package was created under an Administrator, and the SQL agent runs under a different Domain Admin account.
When we set up the Schedule to read from SQL Server or the SSIS Store the standard "Executed as user: DOMAINUSERNAME. The package execution failed. The step failed" in the history.
We tried to create the package as a file access and now get "Package could not be found" even though you can browse to i in the schedule list. The Domain account as full access to the folder where the package resides.
Has anyone else come across this issue, or have a workable solution?
Many TIA.
View 6 Replies
View Related
Jan 29, 2007
I have an SSIS package that fires an OnTaskFailed event whenever any of my tasks fail.
I would like to put any SSIS task failure message into a user defined variable.
Any idea how to do this?
Any help appreciated.
Regards,
Paul.
View 1 Replies
View Related
Aug 10, 2007
I get errors when I check out an SSIS package from source control (both Source Safe and TFS) relating to the connection objects where I was not the original developer who checked it in. Is there a solution to this other than altering the connection loginpassword for every connection object in the package before deploying?
View 4 Replies
View Related
Aug 18, 2006
I'm trying to run a SSIS package (dtsx) from inside an sql job (SQL Server agent). This works fine if the user running (run as) the step is a local admin on the server. If it's not, I get the error message "The package could not be loaded. The step failed". This happens even if the user has all possible serverroles such as "sysadmin" etc in SQL.
So, my question is, is there any way to load an SSIS package without being local admin on the machine? In case it is, what is needed?
regards Andreas
View 3 Replies
View Related
Nov 8, 2006
I have an issue when a job is scheduled to run a SSIS package. The package (exporte a table to a text file) runs fine from microsoft visual studio but when i create a job and run it, i get the following error:
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'VOLCANOAdministrator', error code 0x534. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
View 5 Replies
View Related
Dec 8, 2005
My boss want to close access to xp_cmdshell for any logins including sa.
View 1 Replies
View Related
Feb 27, 2008
Can a SSIS Package be run as a job or a maintance tool. I need it to run nightly. Also in that same job can sql queries be added as well.
Thank you
Dee
View 27 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Mar 28, 2007
I've deployed an ssis package to the database server through the manifest file over the network..
The package runs great when testing through vs.net on my client.
I've added the package to a job step in the sql server job agent.
When I test the new job, the package step fails, but there is no error or log information in the job history.
Wwhere can I get error information? And/or How can make SSIS error information more verbose in the job history?
Thanks for any help or information.
View 6 Replies
View Related
Feb 20, 2007
Lately, I have been experimenting with SSIS and I created a generic custom error logging component that saves all offending data on data flow component failure. However...
Instead of re-directing rows at the data flow level and handling/logging the data at that level, is it possible to catch all of this information at the package level and handle/process it there?
If so how would you do this?
Thanks!
Tony
View 13 Replies
View Related
Oct 24, 2007
Hi
I have created a package which executes every 10 mins. Last week end for maintenance purpose, I shutdown my database. Now as an initial execution process, my package does the default validation steps on which the database connection validation step fails. As this is the default functionality of SSIS I am not able to capture this error. Is there anyway to capture this error inside SSIS Package?
Thanks in advance.
Gnan
View 3 Replies
View Related
Mar 5, 2007
HI All,
can any body give steps to import data from one sqldb to another through ssis package, i was comfotable with dts but ssis is a lil bit confusing.....
thnx
regards
View 1 Replies
View Related
Feb 18, 2008
Can anyone give a newbie a general script for creating an SSIS page to import data nightly from an Access database to sql 2005. They are not on the same server. The Access database us 366,968 kb and grows everyday from input from web content. It has 5 tables and 100's of queries, which is how it is updated.
Please give me a starting point, do not understand the info in books on line.
Thank you
Dee
View 6 Replies
View Related
Apr 9, 2008
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
View 1 Replies
View Related
Jun 18, 2008
Hello,
I'm new here and hope you will be able to help me.
I have created several SSIS packages with Visual Studio 2005.
They all work fine in debug mode.
I have been able to make them work with a ODBC connection by using a ADO.NET connection.
Then I exported them to the file system in my SQL Server 2005 database and created a task in SQLAgent to run them.
All the packages using the ODBC connection fail with the following error :
Login failed for user XXX
Error : 18456; Severity : 14 , State : 8
This error is a password mismatch.
I tried several database users and checked the passwords multiple times.
It looks like SQL Agent is not able to retrieve the password although it is stocked in both the ODBC connection and the SSIS connection.
Can you help me?
Thanks,
Ares
View 19 Replies
View Related
Mar 7, 2007
hi frnds,
i have SSIS package, i would like to schedule the SSIS package inorder to run automatically once in a day.
can anyone suggest me the solun. pls its urgent.
thnkx in adavance..
View 3 Replies
View Related
