Severe Error Occurring When Creating Assembly With External Access Permission

Jul 11, 2006

I had created a CLR function in my db and was able to execute it successfully a couple of months ago. But when I tried to execute it today it was throwing errors saying there was something wrong with the permissions on the assembly. So I decided to drop everything and recreate it except I can not longer create the assembly with EXTERNAL ACCESS permissions. Whenever I try to create the assembly I get the followng error:

Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

Msg 0, Level 20, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

I also tried to create the assembly with Unsafe permissions and got the same error. Does anyone know why this error would be occurring now? I tried creating the same assembly on a different SQL 2005 server and it creates successfully and can be executed successfully. Any help would be greatly appreciated!!

Thanks!

GN

View 3 Replies

Unable To Load An Assembly With Permission Set = EXTERNAL ACCESS

Jul 20, 2007

Hi

I've loaded a C# assembly into my database with External Access (the dll contains a routine

that accesses Environment.MachineName).

I am now unable to invoke any of the entry points in this assembly. I get the error message

'An error occured trying to load assembly Id XYZ. System.IO.FileLoadException.....'

I have set the database Trustworthy flag to ON and the assembly does not have a strong name.

Can anyone tell me what I've done wrong?

Thanks

Steve

P.S. I am calling the assembly from SQL code residing in a different database than the one

the assembly has been loaded into.

View 3 Replies View Related

ALTER ASSEMBLY Error Msg 6509 An Error Occurred While Gathering Metadata From Assembly ‘&&<Assembly Name&&>’ With HRESULT 0x1.

Feb 22, 2008

I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly ��<Assembly name>�� with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
� The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
� The signatures of methods in the assembly that are called from other assemblies.
� The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
� The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
� The FillRow method name attribute for CLR table-valued functions.
� The Accumulate and Terminate method signature for user-defined aggregates.
� System assemblies.
� Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
� Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
� Adding new public methods.
� Modifying private methods in any way.

But I haven��t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I��ve got the same error, if I add or change any method in assembly before rebuilding.

View 9 Replies View Related

Error While Creating Assembly

Apr 12, 2007

I am trying to create an assembly on a sql server 2005 machine but it gives me following error:

Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.

I tried using the alter authorization statement to change the owner.
It did not work.

I am able to create same assembly on another test database but can not create it on this database.

Is this because of orphan logins?

Thanks for the help.

Harshal.

View 4 Replies View Related

Error While Creating Assembly

Apr 12, 2007

I am trying to create an assembly on a sql server 2005 machine but it gives me following error:

Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.

I tried using the alter authorization statement to change the owner.
It did not work.

The same assembly is created on another test database but can not create it on this database.

Is this because of orphan logins?

Thanks for the help.

Harshal.

View 6 Replies View Related

Error Creating Assembly

Mar 12, 2008

I encountered something strange, deploying the following assemblies

CREATE ASSEMBLY [Sentry]

AUTHORIZATION [dbo]

FROM 'c:clrSentry.dll'

WITH PERMISSION_SET = EXTERNAL_ACCESS;

GO

CREATE ASSEMBLY [Sentry.XmlSerializers]

AUTHORIZATION [dbo]

FROM 'C:clrSentry.XmlSerializers.dll'

WITH PERMISSION_SET = SAFE;

GO

Sentry.XmlSerializers errored out with:
Msg 6218, Level 16, State 2, Line 2
CREATE ASSEMBLY for assembly 'Sentry.XmlSerializers' failed because assembly 'Sentry.XmlSerializers' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializerContract::CanSerialize][mdToken=0x600006e][offset 0x00000001][token 0x01000019]System.TypeLoadException: Could not load type 'Sentry.SentryDataService.SentryDataService' from assembly 'Sentry, Version=1.0.2764.18017, Culture=neutral, PublicKeyToken=null'. Type load failed.

The interesting thing is that when I deploy this locally on my machine, there are no problems whatsoever. Using sp_configure the servers appear to be set up the same way. The database also has trustworthy set on for both.

Anything, I could be missing? Thanks

View 8 Replies View Related

Creating A System.Management Assembly In Order For My Own Assembly To Work?

Aug 2, 2006

Hi

I am a bit paranoid about what I just did to my SQL Server 2005 with this CLR experiment.

I created a Class Lib in C# called inLineLib that has a class Queue which represents an object with an ID field.

in another separate namespace called inLineCLRsql, I created a class called test which will hold the function to be accessed from DB, I referenced and created an instances of the Queue class, and retrieve it's ID in a function called PrintMessage.

namespace inlineCLRsql{

public static class test{

public static void PrintMessage(){

inLineLib.Queue q = new inLineLib.Queue();

int i = q.queueId ;

Microsoft.SqlServer.Server.SqlContext.Pipe.Send(i.ToString());

}

}

}

to access this from the db, I attempted to create an assembley referencing inLineCLRsql.dll. This didn't work as it complained about inLineLib assembly not existing in the db. I then attempted to create an assembley for inLineLib but it barfed saying System.Management assembly not created.

so what I did is (and this is where I need to know if I just ruined sql server or not):

1- ALTER DATABASE myDB SET TRUSTWORTHY ON;.

2- CREATE ASSEMBLY SystemManagement

FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Management.dll'

WITH PERMISSION_SET = UNSAFE

3- CREATE ASSEMBLY inLineLibMaster

FROM 'D:inLineServerinLineLibinDebuginLineLib.dll'

WITH PERMISSION_SET = unsafe

4- and finally

CREATE ASSEMBLY inLineLib

FROM 'D:inLineServerCLRSQLinlineCLRsqlinDebuginlineCLRsql.dll'

WITH PERMISSION_SET = SAFE

Everything works after those steps (which took some trial and error). I can create a sproc like:

CREATE PROC sp_test AS

EXTERNAL NAME inLineLib.[inlineCLRsql.test].PrintMessage

and it returns the Queue ID

Is there anything unadvisable about the steps above?

Thanks for your help

M

View 1 Replies View Related

Problem In Registering External Dll Using Create Assembly

Aug 18, 2005

Hi,

View 12 Replies View Related

Unexpected Error From External Database Driver (MS Access Linked Table)

Oct 19, 2006

OS: Windows XP (SP2)
App: MS Access 2003 (SP2)
DB: MS SQL 2000 (SP4, 2040)

User is using MS Access linked table to query database (using ODBC). User can open the query in MS Access. However when the user goes to export the data to MS Excel format, the user receives the error message:

"Unexpected Error from External Database Driver (22)."

A trace on the db, reveals that the user process is attempting to log in to the server as 'Admin'. However, when the query with the linked table is first opened, the user is prompted for username/password (non Windows authentication).

Any ideas? I googled and found some stuff, but nothing directly related and most of what I found was supposedly fixed with SP1.

Any help appreciated. I am not an Access guru.

Regards,

hmscott

View 1 Replies View Related

Transact SQL :: Getting Data From External Assembly Into Temp Table Inside Stored Procedure

Oct 8, 2015

I have a Custom .net assembly which retrieves some data, basically just a set of data containing, ID, value,

I need my stored procedure to return this data as a table.

My question what/how is fastest way to do this, my assembly can return anything you want, a datatable, a hashtable, list of(class) etc..

View 3 Replies View Related

Reporting Services :: External Assembly Reference Same DB Data Source As Calling Report?

Aug 25, 2015

I have a SSRS 2012 report which references a custom c# assembly. This report exists in multiple environments (alpha, beta and production ) which are each associated with different data sources.

Is there a way for the assembly to determine the datasource used by the calling report so it can also connect to it?

View 2 Replies View Related

ALTER ASSEMBLY Needs Special Permission

Feb 20, 2008

Hello again,

I get an error message every time I want to alter an assembly in the Management Studio. The message goes something like this:

"An error occurred in the Microsoft .NET Framework while trying to load assembly id 65610. The server may be running out of resources, or the assembly may not be trusted with PERMISSION_SET = EXTERNAL_ACCESS or UNSAFE. Run the query again, or check documentation to see how to solve the assembly trust issues."
I've already found this article on Microsoft support which mentions two possible workarounds. Could you possibly explain me, how do they work? I've tried both methods by 'registering' my windows login, with and without the domain, but none of them seemed to work. I've also set the TRUSTWORTHY property before using these workarounds.

So, do you have any ideas what could possibly went wrong? Thanks in advance for your time and help!

View 8 Replies View Related

Can't Deploy Unsafe Assembly, Permission Problem(?)

Sep 19, 2007

Hello,

I think I have some kind of permission problem. But first things first:

I have code which I would like to run in SQL Server (CLR Integration). First thing is that my code uses third-party-dll. I have to deploy my code as unsafe because of

"

CREATE ASSEMBLY failed because method "add_FunctionAdd" on type "USP.Express.Pro.FunctionsCollection" in safe assembly "USP.Express.Pro.2.0" has a synchronized attribute. Explicit synchronization is not allowed in safe assemblies.
"

Of course I can not create "asymmetric key" for third-party-dll (Or can I?).

So, I tried to use trustworthy DB. But I get all the time error Msg 10327: "Assembly is not authorised for PERMISSION_SET=UNSAFE"

I am using Windows Login to log on Sql Server. Login is granted "Unsafe assembly" and DB has trustworthy setting "on".

Login has server roles "sysadmin" and "securityadmin".
Login is mapped with DB User who has same name ( DOMAINUserName ) and has default schema "dbo".
Login has DB memberships "db_owner" and "db_securityadmin".
DB user owns schemas "db_owner" and "db_securityadmin".

Am I missing something?

Interesting thing is that I can do deployment (as unsafe assembly) in master-database. But not in the other databases.

Questions are:
- Is there other way to authorise third-party-dll than using trustworthy?
- Why deployment can be done in master-database?

And finally:
- Why deployment can not be done in other database?

View 9 Replies View Related

FTP Task Error Occurring

Apr 16, 2007

This is strange... just started getting this today, while it's worked for weeks. But alas, that is programming.

The error I'm getting is

[Connection manager "FTP DQ Connection"] Error: An error occurred in the requested FTP operation. Detailed error description: 200 Type set to I. 200 Command okay. 550 /usfsr/DFE_INPUT/FATest_DQ.txt: No such file or folder. .

I'm uploading a file (FATest_DQ.txt) to the folder /usfsr/DFE_INPUT/. I eventually just uploaded the file manually using IE6 to make sure the connection properties were still the same.

Any ideas?

View 1 Replies View Related

Severe Error Encountered With Synonyms

Oct 10, 2006

we now used synonyms on the version 6 of our peoject, at first it turns out good. Then we migrate a database to the new database, everythings fine, its just a data migration anyway. The target database' structure and DML's wasn't change during migration. then intermittendly, we're encountering "A severe error occurred on the current command. The results, if any, should be discarded". I said its intermittent because sometime its ok, mostly its not functioning.

This is very painfull because all our scripts has this synonym. All our scripts uses an sp execution logging stored procedured of another database so we created a synonym for those sp's instead of fully qualifying the procedure name.

This is a major issue for us, please advise. You may response here, send me email or email me. Many Thanks.

Rodel E. Dagumampan
Email: dehranph@gmail.com
Yahoo: dehranph
Blog: http://community.devpinoy.org/blogs/dehranph

View 7 Replies View Related

Error Registering Assembly Using CREATE ASSEMBLY

May 1, 2008

We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can��t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.

CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.

View 8 Replies View Related

Error Creating First SQL Express Database Via VWD 2005 Express: User Does Not Have Permission To Perform This Action

Aug 18, 2006

I get an error dialog when I try to create a new SQL database, both via the Add New Item dialog and the property wizard of a new SqlDataSource control. The error is:

Local Database File:

User does not have permission to perform this action.

I've searched for help with this.

I ensured the App_Data folder exists and I added the local ASP.NET account to the group that have R/W access to it (although the RO flag is in an unchangeable tri-state on the folder).
The SQL Server Express error log is clean and indicates full functionality.
Everything is running locally.
No VWD installation errors.

Any ideas?

Thank you!

View 3 Replies View Related

A Severe Error Occurred On The Current Command.

Aug 23, 2006

I am having problems with an error that I keep receiving. The error message states "A severe error occurred on the current command. The results, if any, should
be discarded."This error is popping up when I try to call a specific stored procedure in SQL2005. The error is not specific to ASP.NET code because it also occurs if I try to run the procedure in SQL Server Management Studio. The procedure is exactly the same that is running on an SQL2000 server on a live site, so it apparently is specific to SQL2005.I have not worked much with SQL2005 or SQL cursors in the past and this code was not written by me so I am not sure where to start making changes, if any are needed.The procedure is as follows:ALTER PROCEDURE [dbo].[spGetAdmins] @userid int, @forDate datetimeASDECLARE @lngTabCount INTEGER, @lngLoopCount INTEGER, @type varchar(15), @id varchar(20), @statement varchar(1000), @useridLocal int, @forDateLocal datetimeSET @useridLocal = @useridSET @forDateLocal = @forDateDECLARE @AdminInfo TABLE (AdminID varchar(20), AdminName varchar(50)) /* check parameters */ IF (@useridLocal <= 0) BEGIN RAISERROR( 'Invalid UserID (%d)', 16, 1, @useridLocal ) END IF (@forDateLocal IS NULL) BEGIN SELECT @forDateLocal = GETDATE() ENDDECLARE profInfo CURSORLOCAL FORWARD_ONLYFOR SELECT ProfileType, ProfileValue FROM tblCSUserProfile WHERE UserID = @useridLocal and (StartDate is not null or StartDate <= @forDateLocal ) and (EndDate is null or EndDate > @forDateLocal ) ORDER BY ProfileTypeOPEN profInfoFETCH profInfo INTO @type, @idWHILE @@Fetch_Status = 0 BEGIN IF @id = '*' BEGIN INSERT INTO @AdminInfo VALUES ('*', '* Everything') END ELSE BEGIN INSERT INTO @AdminInfo SELECT adm.[ADM_CODE], adm.[ADMIN_NAM] FROM OPENROWSET('SQLOLEDB', 'server'; 'database'; 'password', [table]) AS adm WHERE adm.[ADM_CODE] = @id END FETCH profInfo INTO @type, @id ENDCLOSE profInfoDEALLOCATE profInfoSELECT DISTINCT(UPPER(AdminID)) AS AdminCodeFROM @AdminInfo GROUP BY AdminIDORDER BY AdminCode

View 1 Replies View Related

Command.ExecuteNonQuery() Error Occurring NULL Value

Apr 2, 2008

Here is the table that I am wanting to insert the information into (BTW I am wanting the UserID, EntryDate, Note) On my page i do have a text box for the UserID as well as a Note textbox. When I hite the submit button on my page I am already sending the UserID textbox information to be sent to another table (called RequestTable). However, I am wanting to take that same UserID and insert it into the RequestNote table as well. Let me know if you have any questions for me to further explain anything.
**RequestNote**RequestNoteKey (PK) (has identity set to yes)RequestKey (allows nulls)NoteEntryDateEntryUserID (allows Nulls)****This is my stored procedure that I am calling called "NoteInsert"***@Note nvarchar(1000),@EntryUserID nvarchar(50)AS INSERT INTO RequestNote (Note, EntryDate,EntryUserID)
VALUES (@Note,GetDate(), @EntryUserID)
RETURNGO
****THIS IS THE PAGE THAT CONNECTS THE USER INTERFACE AND STORED PROCEDURE***public static void AddRequestNote(string requestNote, string userID){using (SqlConnection connection = new SqlConnection(connRequestNote)){using (SqlCommand command = new SqlCommand("NoteInsert", connection)){command.CommandType = CommandType.StoredProcedure;command.Parameters.Add(new SqlParameter("@Note", requestNote));command.Parameters.Add(new SqlParameter("@EntryUserID", userID));connection.Open();command.ExecuteNonQuery(); <--THIS IS WHERE I GET AN ERROR THAT SAYS Cannot insert the value NULL into column 'RequestNoteKey', table 'RequestNote'; column does not allow nulls. INSERT fails}

View 5 Replies View Related

A Severe Error Occurred On The Current Command

Oct 17, 2007

Hi EveryBody,

I have got some problem in our SQL Server 2k5, Randomly the SQL Servercies stops responding on the server side and if we try to login to SQL server it gives Error "A severe error occurred on the current command"

we is there any solution to this? whenever we face this problem we need to restart the server, on few places i have seen the recomendation of SP 2, but m not sure that it will solve the problem or not.... i will appreciate if some one can can suggest me the solution??

View 4 Replies View Related

CLR UDAGG Returns Severe Error On Certain Cases

Jun 18, 2007

Hi peoples,

I have created a custom CLR user define aggregate function based on the example that i found at http://msdn2.microsoft.com/en-us/library/ms131056(SQL.90).aspx.

It works great until i discovered that it will failed if i try to do either one of the following:

query a large records e.g: more than 4k records
has IS NULL in my where clause e.g: WHERE myConcatenatedFld IS NULL

Other than these two, it works perfectly fine.

Here is the error that i got:

Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

I have attached the Concatenate class that i used in my UDAGG.

Code Snippet

using System;

using System.Data;

using System.Data.SqlClient;

using System.Data.SqlTypes;

using Microsoft.SqlServer.Server;

using System.IO;

using System.Text;

[Serializable]

[Microsoft.SqlServer.Server.SqlUserDefinedAggregate(

Format.UserDefined, //use custom serialization to serialize the intermediate result

IsInvariantToNulls = true, //optimizer property

IsInvariantToDuplicates = false, //optimizer property

IsInvariantToOrder = false, //optimizer property

MaxByteSize = 8000) //maximum size in bytes of persisted value

]

public class Concatenate : IBinarySerialize

{

/// <summary>

/// The variable that holds the intermediate result of the concatenation

/// </summary>

private StringBuilder intermediateResult;

private const int MAX_STRING_LEN = 4000;

/// <summary>

/// Initialize the internal data structures

/// </summary>

public void Init()

{

this.intermediateResult = new StringBuilder();

}

/// <summary>

/// Accumulate the next value, not if the value is null

/// </summary>

/// <param name="value"></param>

public void Accumulate(SqlString value)

{

//Dont do anything if the input is null or empty

if (value.IsNull || value.Value.Length == 0)

{

return;

}

//Skip concatenation if the output exceed 4000 chars

if (this.intermediateResult.Length + value.Value.Length > MAX_STRING_LEN)

{

return;

}

//Concatenate output

if (!this.intermediateResult.ToString().Contains(value.Value.Trim()))

this.intermediateResult.Append(value.Value.Trim()).Append(", ");

}

/// <summary>

/// Merge the partially computed aggregate with this aggregate.

/// </summary>

/// <param name="other"></param>

public void Merge(Concatenate other)

{

//Skip concatenation if the output exceed 4000 chars

if (this.intermediateResult.Length + other.intermediateResult.Length > MAX_STRING_LEN)

{

return;

}

//Concatenate computed output

this.intermediateResult.Append(other.intermediateResult);

}

/// <summary>

/// Called at the end of aggregation, to return the results of the aggregation.

/// </summary>

/// <returns></returns>

public SqlString Terminate()

{

string output = string.Empty;

//delete the trailing comma, if any

if (this.intermediateResult != null

&& this.intermediateResult.Length > 0)

{

output = this.intermediateResult.ToString(0, this.intermediateResult.Length - 2);

}

return new SqlString(output);

}

public void Read(BinaryReader r)

{

intermediateResult = new StringBuilder(r.ReadString());

}

public void Write(BinaryWriter w)

{

w.Write(this.intermediateResult.ToString());

}

}

Anyone has any idea on how to solve this issue?. Thanks

View 5 Replies View Related

A Severe Error Occurred On The Current Command. The Results, If Any, Should Be Ignored

Feb 1, 2008

I got the above error executing a stored procedure from .Net app and I isolated the issue on the following sql statement inside the sp. I executed the statement manually inside the MSSQL Mgt Studio and got the same error as above. Here is the sql statement:
SELECT F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,F13,F14,F15,F16,F17,F18,F19,F20,F21,F22,F23,F24,F25,F26,F27,F28,F29 from OpenRowset('MSDASQL', 'Driver={Microsoft Text Driver (*.txt; *.csv)};DefaultDir=E:\TPSDATA\az\;','select * from prohist.csv where f1 < 0 ')

the data file exists in the directory 'E: psdataazprohist.csv' . I'm running on SQL2005 version 9.00.3054.00. Any ideas what the problem is? Appreciate any feedback

View 4 Replies View Related

SQL 2000 A Severe Error Occurred On The Current Command.

Jan 9, 2007

I am recently getting SQLException on production sql database that uses SQL Session State. Any help on how to fix or what to look for. I also noticed some errors on the eventlog (attached below).

Error Message:

System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded

Stack Trace:

[HttpException (0x80004005): Unable to connect to SQL Server session database.]

System.Web.SessionState.SqlStateClientManager.SetAsyncWorker(String id, SessionStateItem item, Byte[] buf, Int32 length, Boolean inStorage) + 524

System.Web.SessionState.SqlStateClientManager.System.Web.SessionState.IStateClientManager.Set(String id, SessionStateItem item, Boolean inStorage) ...

EventLog:

Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 1/9/2007
Time: 9:28:34 AM
User: N/A
Computer: CompName
Description:
Error: 17803, Severity: 20, State: 12
Insufficient memory available.
Data:
0000: 8b 45 00 00 14 00 00 00 �E......
0008: 07 00 00 00 4c 00 4c 00 ....L.L.
0010: 44 00 42 00 30 00 31 00 D.B.0.1.
0018: 00 00 09 00 00 00 41 00 ......A.
0020: 53 00 50 00 53 00 74 00 S.P.S.t.
0028: 61 00 74 00 65 00 00 00 a.t.e...

View 5 Replies View Related

Database Schemas And This Statement Has Attempted To Access Data Whose Access Is Restricted By The Assembly.

Jul 14, 2005

Hello.

View 5 Replies View Related

A Severe Error Occurred On The Current Command. The Results, If Any, Should Be Discarded.

Aug 27, 2002

Hi,

I am hosting my ASP.NET application on a Host and after some time I get this error
(Don't get it on my development machine):

A severe error occurred on the current command. The results, if any, should be discarded.

And then it says this on the same page:

Exception Details: System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

[SqlException: A severe error occurred on the current command. The results, if any, should be discarded.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +643
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) +9
ASPNetPortal.PortalSettings..ctor(Int32 tabIndex, Int32 tabId)
ASPNetPortal.Global.Application_BeginRequest(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.Execute() +60
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

I thought this is a problem with max pool size and I did it max pool size = 5000, now application runs ok for some time and then produces this error but some times this comes very soon.

As a solution, I have to copy my dll in bin directory again and application restarts and works properly but then after some time this happenes again.

Please let me know whats the problem.
I checked all of my SqlDataReaders and SqlConnections are closed properly.

Any help would be appreciated.

Thanks.

Rahul.

View 8 Replies View Related

A Severe Error Occurred On The Current Command. The Results, If Any, Should Be Discarded

Feb 26, 2008

Hi all. I am running on SQL 2005 Standard eddition SP2, Also did install " KB Article Number(s): 944929, 946608, 948490, 949118". Running on 2003 server.

Error:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

I have 2 servers. One of them is free text seach with files stored in DB. On main server there is a link back to this file DB server.

I am trying to run this script and then error from above... link_kance_doc is link to table on other server. Strange thing is when I run this same script on server 3 with same link to file DB server it works. It also works when runed on file DB server.
Also, if I dont use WHERE CONTRAINS SQL does return Dataset..

SELECT link_kance_doc.ID, link_kance_doc.DocName, link_kance_doc.DocExtension, link_kance_doc.KancelID, link_kance_doc.Comments,
link_kance_doc.CreateByUser, link_kance_doc.CreateTS, link_kance_doc.ActiveYN
FROM link_kance_doc
where Contains(*,'"murte"')

Any ideas..

Server LOG

02/26/2008 16:54:05,Server,Unknown,A user request from the session with SPID 57 generated a fatal exception. SQL Server is terminating this session. Contact Product Support Services with the dump produced in the log directory.
02/26/2008 16:54:05,Server,Unknown,Error: 17310<c/> Severity: 20<c/> State: 1.
02/26/2008 16:54:05,spid57,Unknown,External dump process return code 0x20000001.<nl/>External dump process returned no errors.
02/26/2008 16:54:04,spid57,Unknown,Stack Signature for the dump is 0x28BDEE59
02/26/2008 16:54:04,spid57,Unknown,78132A47 Module(MSVCR80+00002A47)
02/26/2008 16:54:04,spid57,Unknown,781329BB Module(MSVCR80+000029BB)
02/26/2008 16:54:04,spid57,Unknown,010B9201 Module(sqlservr+000B9201)
02/26/2008 16:54:04,spid57,Unknown,010B9064 Module(sqlservr+000B9064)
02/26/2008 16:54:04,spid57,Unknown,010B939C Module(sqlservr+000B939C)
02/26/2008 16:54:04,spid57,Unknown,010B94A5 Module(sqlservr+000B94A5)
02/26/2008 16:54:04,spid57,Unknown,010075DC Module(sqlservr+000075DC)
02/26/2008 16:54:04,spid57,Unknown,010078CC Module(sqlservr+000078CC)
02/26/2008 16:54:04,spid57,Unknown,010077A6 Module(sqlservr+000077A6)
02/26/2008 16:54:04,spid57,Unknown,0102F1F4 Module(sqlservr+0002F1F4)
02/26/2008 16:54:04,spid57,Unknown,01032A36 Module(sqlservr+00032A36)
02/26/2008 16:54:04,spid57,Unknown,01028600 Module(sqlservr+00028600)
02/26/2008 16:54:04,spid57,Unknown,0134752A Module(sqlservr+0034752A)
02/26/2008 16:54:04,spid57,Unknown,01430633 Module(sqlservr+00430633)
02/26/2008 16:54:04,spid57,Unknown,01346B6B Module(sqlservr+00346B6B)
02/26/2008 16:54:04,spid57,Unknown,013A929A Module(sqlservr+003A929A)
02/26/2008 16:54:04,spid57,Unknown,01368BB2 Module(sqlservr+00368BB2)
02/26/2008 16:54:04,spid57,Unknown,013A9BDC Module(sqlservr+003A9BDC)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013AFC6E Module(sqlservr+003AFC6E)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013AF8D0 Module(sqlservr+003AF8D0)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013B0CC7 Module(sqlservr+003B0CC7)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013A9DC5 Module(sqlservr+003A9DC5)
02/26/2008 16:54:04,spid57,Unknown,013A9F20 Module(sqlservr+003A9F20)
02/26/2008 16:54:04,spid57,Unknown,01B2E1B9 Module(sqlservr+00B2E1B9)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,01B24372 Module(sqlservr+00B24372)
02/26/2008 16:54:04,spid57,Unknown,0136A2D8 Module(sqlservr+0036A2D8)
02/26/2008 16:54:04,spid57,Unknown,0149C867 Module(sqlservr+0049C867)
02/26/2008 16:54:04,spid57,Unknown,0170D0CD Module(sqlservr+0070D0CD)
02/26/2008 16:54:04,spid57,Unknown,0170F7E3 Module(sqlservr+0070F7E3)
02/26/2008 16:54:04,spid57,Unknown,0170FB90 Module(sqlservr+0070FB90)
02/26/2008 16:54:04,spid57,Unknown,01702514 Module(sqlservr+00702514)
02/26/2008 16:54:04,spid57,Unknown,010A0F91 Module(sqlservr+000A0F91)
02/26/2008 16:54:04,spid57,Unknown,* Short Stack Dump
02/26/2008 16:54:04,spid57,Unknown,* -------------------------------------------------------------------------------
02/26/2008 16:54:04,spid57,Unknown,* *******************************************************************************
02/26/2008 16:54:04,spid57,Unknown,* SegSs: 00000023:
02/26/2008 16:54:04,spid57,Unknown,* Esp: 6373E24C: 00000004 00000000 6373E544 01702514 00000004 01019094
02/26/2008 16:54:04,spid57,Unknown,* EFlags: 00010206: 0055004E 0042004D 00520045 004F005F 005F0046 00520050
02/26/2008 16:54:04,spid57,Unknown,* SegCs: 0000001B:
02/26/2008 16:54:04,spid57,Unknown,* Ebp: 6373E254: 6373E544 01702514 00000004 01019094 637311EB 042DAD88
02/26/2008 16:54:04,spid57,Unknown,* Eip: 010A0F91: 103B118B B60FCD74 38B60F11 840FD72B 003D5E1C 01B8D285
02/26/2008 16:54:04,spid57,Unknown,* Edx: 042DAD48: 042DAAB8 042DA278 042DAA18 042DAD70 042DAF58 00000001
02/26/2008 16:54:04,spid57,Unknown,* Ecx: 00000004:
02/26/2008 16:54:04,spid57,Unknown,* Ebx: 05E929F8: 01622A98 00000001 00000000 00000000 00000000 00000000
02/26/2008 16:54:04,spid57,Unknown,* Eax: 01019094: 00000000 00000000 00000000 00000000 90909090 55FF8B90
02/26/2008 16:54:04,spid57,Unknown,* Esi: 00000010:
02/26/2008 16:54:04,spid57,Unknown,* Edi: 00000004:
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* dbghelp 64600000 64714FFF 00115000
02/26/2008 16:54:04,spid57,Unknown,* MSDATL3 64450000 64464FFF 00015000
02/26/2008 16:54:04,spid57,Unknown,* sqloledb 643C0000 64440FFF 00081000
02/26/2008 16:54:04,spid57,Unknown,* xpstar90 64390000 643B5FFF 00026000
02/26/2008 16:54:04,spid57,Unknown,* msadcer 64380000 64384FFF 00005000
02/26/2008 16:54:04,spid57,Unknown,* msadce 64320000 64377FFF 00058000
02/26/2008 16:54:04,spid57,Unknown,* OLEDB32R 64300000 64310FFF 00011000
02/26/2008 16:54:04,spid57,Unknown,* MSDART 64060000 64079FFF 0001a000
02/26/2008 16:54:04,spid57,Unknown,* oledb32 63FE0000 64058FFF 00079000
02/26/2008 16:54:04,spid57,Unknown,* odbcint 63FC0000 63FD6FFF 00017000
02/26/2008 16:54:04,spid57,Unknown,* ATL80 7C630000 7C64AFFF 0001b000
02/26/2008 16:54:04,spid57,Unknown,* BatchParser90 63E50000 63E6EFFF 0001f000
02/26/2008 16:54:04,spid57,Unknown,* ODBC32 63E10000 63E4CFFF 0003d000
02/26/2008 16:54:04,spid57,Unknown,* SQLSCM90 63DF0000 63DF8FFF 00009000
02/26/2008 16:54:04,spid57,Unknown,* xpstar90 63D90000 63DD8FFF 00049000
02/26/2008 16:54:04,spid57,Unknown,* msftepxy 63600000 63614FFF 00015000
02/26/2008 16:54:04,spid57,Unknown,* SQLNCLIR 00830000 00862FFF 00033000
02/26/2008 16:54:04,spid57,Unknown,* comdlg32 762B0000 762F8FFF 00049000
02/26/2008 16:54:04,spid57,Unknown,* COMCTL32 77530000 775C6FFF 00097000
02/26/2008 16:54:04,spid57,Unknown,* sqlncli 631D0000 633F3FFF 00224000
02/26/2008 16:54:04,spid57,Unknown,* CLBCatQ 777B0000 77832FFF 00083000
02/26/2008 16:54:04,spid57,Unknown,* xpsp2res 62F00000 631C4FFF 002c5000
02/26/2008 16:54:04,spid57,Unknown,* ntdsapi 766F0000 76703FFF 00014000
02/26/2008 16:54:04,spid57,Unknown,* SAMLIB 7E020000 7E02EFFF 0000f000
02/26/2008 16:54:04,spid57,Unknown,* NTMARTA 77E00000 77E20FFF 00021000
02/26/2008 16:54:04,spid57,Unknown,* wshtcpip 71AE0000 71AE7FFF 00008000
02/26/2008 16:54:04,spid57,Unknown,* hnetcfg 62E60000 62EB9FFF 0005a000
02/26/2008 16:54:04,spid57,Unknown,* dssenh 68100000 68126FFF 00027000
02/26/2008 16:54:04,spid57,Unknown,* imagehlp 76C10000 76C37FFF 00028000
02/26/2008 16:54:04,spid57,Unknown,* WINTRUST 76BB0000 76BDAFFF 0002b000
02/26/2008 16:54:04,spid57,Unknown,* dbghelp 62B00000 62C14FFF 00115000
02/26/2008 16:54:04,spid57,Unknown,* msfte 628A0000 62AF8FFF 00259000
02/26/2008 16:54:04,spid57,Unknown,* security 62210000 62213FFF 00004000
02/26/2008 16:54:04,spid57,Unknown,* rasadhlp 76F80000 76F84FFF 00005000
02/26/2008 16:54:04,spid57,Unknown,* WLDAP32 76F10000 76F3DFFF 0002e000
02/26/2008 16:54:04,spid57,Unknown,* winrnr 76F70000 76F76FFF 00007000
02/26/2008 16:54:04,spid57,Unknown,* DNSAPI 76ED0000 76EF9FFF 0002a000
02/26/2008 16:54:04,spid57,Unknown,* RESUTILS 61DC0000 61DD2FFF 00013000
02/26/2008 16:54:04,spid57,Unknown,* CLUSAPI 61DA0000 61DB1FFF 00012000
02/26/2008 16:54:04,spid57,Unknown,* WSOCK32 71BB0000 71BB8FFF 00009000
02/26/2008 16:54:04,spid57,Unknown,* VERSION 77B90000 77B97FFF 00008000
02/26/2008 16:54:04,spid57,Unknown,* MTXCLU 61D80000 61D98FFF 00019000
02/26/2008 16:54:04,spid57,Unknown,* msvcp60 61D10000 61D74FFF 00065000
02/26/2008 16:54:04,spid57,Unknown,* OLEAUT32 77D00000 77D8AFFF 0008b000
02/26/2008 16:54:04,spid57,Unknown,* MSDTCPRX 61C90000 61D08FFF 00079000
02/26/2008 16:54:04,spid57,Unknown,* XOLEHLP 61C80000 61C85FFF 00006000
02/26/2008 16:54:04,spid57,Unknown,* COMRES 77010000 770D5FFF 000c6000
02/26/2008 16:54:04,spid57,Unknown,* schannel 76750000 76776FFF 00027000
02/26/2008 16:54:04,spid57,Unknown,* cryptdll 766E0000 766EBFFF 0000c000
02/26/2008 16:54:04,spid57,Unknown,* kerberos 61BD0000 61C27FFF 00058000
02/26/2008 16:54:04,spid57,Unknown,* iphlpapi 76CF0000 76D09FFF 0001a000
02/26/2008 16:54:04,spid57,Unknown,* msv1_0 76C90000 76CB6FFF 00027000
02/26/2008 16:54:04,spid57,Unknown,* ole32 77670000 777A8FFF 00139000
02/26/2008 16:54:04,spid57,Unknown,* MSCOREE 34190000 341D4FFF 00045000
02/26/2008 16:54:04,spid57,Unknown,* AUTHZ 76C40000 76C53FFF 00014000
02/26/2008 16:54:04,spid57,Unknown,* rsaenh 68000000 68034FFF 00035000
02/26/2008 16:54:04,spid57,Unknown,* SQLOS 344D0000 344D4FFF 00005000
02/26/2008 16:54:04,spid57,Unknown,* sqlevn70 4F610000 4F7B8FFF 001a9000
02/26/2008 16:54:04,spid57,Unknown,* instapi 48060000 48069FFF 0000a000
02/26/2008 16:54:04,spid57,Unknown,* psapi 76B70000 76B7AFFF 0000b000
02/26/2008 16:54:04,spid57,Unknown,* comctl32 77420000 77522FFF 00103000
02/26/2008 16:54:04,spid57,Unknown,* IMM32 76290000 762ACFFF 0001d000
02/26/2008 16:54:04,spid57,Unknown,* SHLWAPI 77DA0000 77DF1FFF 00052000
02/26/2008 16:54:04,spid57,Unknown,* SHELL32 7C8D0000 7D0CEFFF 007ff000
02/26/2008 16:54:04,spid57,Unknown,* NETAPI32 71C40000 71C96FFF 00057000
02/26/2008 16:54:04,spid57,Unknown,* opends60 333E0000 333E6FFF 00007000
02/26/2008 16:54:04,spid57,Unknown,* USERENV 76920000 769E1FFF 000c2000
02/26/2008 16:54:04,spid57,Unknown,* WS2HELP 71BF0000 71BF7FFF 00008000
02/26/2008 16:54:04,spid57,Unknown,* WS2_32 71C00000 71C16FFF 00017000
02/26/2008 16:54:04,spid57,Unknown,* MSWSOCK 71B20000 71B60FFF 00041000
02/26/2008 16:54:04,spid57,Unknown,* MSASN1 76190000 761A1FFF 00012000
02/26/2008 16:54:04,spid57,Unknown,* CRYPT32 761B0000 76242FFF 00093000
02/26/2008 16:54:04,spid57,Unknown,* GDI32 77C00000 77C47FFF 00048000
02/26/2008 16:54:04,spid57,Unknown,* USER32 77380000 77410FFF 00091000
02/26/2008 16:54:04,spid57,Unknown,* Secur32 76F50000 76F62FFF 00013000
02/26/2008 16:54:04,spid57,Unknown,* RPCRT4 77C50000 77CEEFFF 0009f000
02/26/2008 16:54:04,spid57,Unknown,* ADVAPI32 77F50000 77FEAFFF 0009b000
02/26/2008 16:54:04,spid57,Unknown,* MSVCP80 7C420000 7C4A6FFF 00087000
02/26/2008 16:54:04,spid57,Unknown,* msvcrt 77BA0000 77BF9FFF 0005a000
02/26/2008 16:54:04,spid57,Unknown,* MSVCR80 78130000 781CAFFF 0009b000
02/26/2008 16:54:04,spid57,Unknown,* kernel32 77E40000 77F41FFF 00102000
02/26/2008 16:54:04,spid57,Unknown,* ntdll 7C800000 7C8BFFFF 000c0000
02/26/2008 16:54:04,spid57,Unknown,* sqlservr 01000000 02C09FFF 01c0a000
02/26/2008 16:54:04,spid57,Unknown,* MODULE BASE END SIZE
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* ins(*<c/>'"murte"')
02/26/2008 16:54:04,spid57,Unknown,* teTS<c/> link_kance_doc.ActiveYN FROM link_kance_doc where Conta
02/26/2008 16:54:04,spid57,Unknown,* link_kance_doc.CreateByUser<c/> link_kance_doc.Crea
02/26/2008 16:54:04,spid57,Unknown,* nce_doc.DocExtension<c/> link_kance_doc.KancelID<c/> link_kance_doc.Comments<c/>
02/26/2008 16:54:04,spid57,Unknown,* SELECT link_kance_doc.ID<c/> link_kance_doc.DocName<c/> link_ka
02/26/2008 16:54:04,spid57,Unknown,* Input Buffer 510 bytes -
02/26/2008 16:54:04,spid57,Unknown,* Access Violation occurred reading address 00000004
02/26/2008 16:54:04,spid57,Unknown,* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
02/26/2008 16:54:04,spid57,Unknown,* Exception Address = 010A0F91 Module(sqlservr+000A0F91)
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* 02/26/08 16:54:04 spid 57
02/26/2008 16:54:04,spid57,Unknown,* BEGIN STACK DUMP:
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* *******************************************************************************
02/26/2008 16:54:04,spid57,Unknown,SqlDumpExceptionHandler: Process 57 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
02/26/2008 16:54:04,spid57,Unknown,***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0063.txt
02/26/2008 16:54:04,spid57,Unknown,Using 'dbghelp.dll' version '4.0.5'
02/26/2008 16:54:03,Server,Unknown,A user request from the session with SPID 57 generated a fatal exception. SQL Server is terminating this session. Contact Product Support Services with the dump produced in the log directory.
02/26/2008 16:54:03,Server,Unknown,Error: 17310<c/> Severity: 20<c/> State: 1.
02/26/2008 16:54:03,spid57,Unknown,External dump process return code 0x20000001.<nl/>External dump process returned no errors.
02/26/2008 16:54:02,spid57,Unknown,Stack Signature for the dump is 0x28BDEE59
02/26/2008 16:54:02,spid57,Unknown,78132A47 Module(MSVCR80+00002A47)
02/26/2008 16:54:02,spid57,Unknown,781329BB Module(MSVCR80+000029BB)
02/26/2008 16:54:02,spid57,Unknown,010B9201 Module(sqlservr+000B9201)
02/26/2008 16:54:02,spid57,Unknown,010B9064 Module(sqlservr+000B9064)
02/26/2008 16:54:02,spid57,Unknown,010B939C Module(sqlservr+000B939C)
02/26/2008 16:54:02,spid57,Unknown,010B94A5 Module(sqlservr+000B94A5)
02/26/2008 16:54:02,spid57,Unknown,010075DC Module(sqlservr+000075DC)
02/26/2008 16:54:02,spid57,Unknown,010078CC Module(sqlservr+000078CC)
02/26/2008 16:54:02,spid57,Unknown,010077A6 Module(sqlservr+000077A6)
02/26/2008 16:54:02,spid57,Unknown,0102F1F4 Module(sqlservr+0002F1F4)
02/26/2008 16:54:02,spid57,Unknown,01032A36 Module(sqlservr+00032A36)
02/26/2008 16:54:02,spid57,Unknown,01028600 Module(sqlservr+00028600)
02/26/2008 16:54:02,spid57,Unknown,0134752A Module(sqlservr+0034752A)
02/26/2008 16:54:02,spid57,Unknown,01430633 Module(sqlservr+00430633)
02/26/2008 16:54:02,spid57,Unknown,01346B6B Module(sqlservr+00346B6B)
02/26/2008 16:54:02,spid57,Unknown,013A929A Module(sqlservr+003A929A)
02/26/2008 16:54:02,spid57,Unknown,01368BB2 Module(sqlservr+00368BB2)
02/26/2008 16:54:02,spid57,Unknown,013A9BDC Module(sqlservr+003A9BDC)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013AFC6E Module(sqlservr+003AFC6E)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013AF8D0 Module(sqlservr+003AF8D0)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013B0CC7 Module(sqlservr+003B0CC7)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013A9DC5 Module(sqlservr+003A9DC5)
02/26/2008 16:54:02,spid57,Unknown,013A9F20 Module(sqlservr+003A9F20)
02/26/2008 16:54:02,spid57,Unknown,01B2E1B9 Module(sqlservr+00B2E1B9)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,01B24372 Module(sqlservr+00B24372)
02/26/2008 16:54:02,spid57,Unknown,0136A2D8 Module(sqlservr+0036A2D8)
02/26/2008 16:54:02,spid57,Unknown,0149C867 Module(sqlservr+0049C867)
02/26/2008 16:54:02,spid57,Unknown,0170D0CD Module(sqlservr+0070D0CD)
02/26/2008 16:54:02,spid57,Unknown,0170F7E3 Module(sqlservr+0070F7E3)
02/26/2008 16:54:02,spid57,Unknown,0170FB90 Module(sqlservr+0070FB90)
02/26/2008 16:54:02,spid57,Unknown,01702514 Module(sqlservr+00702514)
02/26/2008 16:54:02,spid57,Unknown,010A0F91 Module(sqlservr+000A0F91)

View 1 Replies View Related

DBCC SHRINKFILE Gives A Severe Error Occurred On The Current Command.

Oct 14, 2007

I am using SQL Server SP 2 on Windows 2003 Server Standard edition:

Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)

I have a datbase that's rather large. The log file is 94656 pages, and the data file itself is 94197200 pages. There's only one data file and one log file. The database passes DBCC CHEKCDATABASE with no errors.

When I run DBCC SHRINKDATABASE against the database, the command runs for about twenty seconds then produces this error:

Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

I can't find anything interesting in the ERRORLOG around the time that I run this command. The error appears if I use the TRUNCATEONLY option or not.

How do I fix this problem?

And in general, why are the engine errors in SQL Server so confusing and not directly actionable?

View 1 Replies View Related

Creating A View Of An External Source

Nov 7, 2007

Hello,

I want to create a view in sql 2000 that will pull in data from a ms access database. What is the correct syntax for the select statement?
Thanks

View 4 Replies View Related

Error: CREATE ASSEMBLY For Assembly

May 31, 2007

I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import ��System.IO�? and have therefore set the permission levels to EXTERNAL_ACCESS.

I am receiving the same error message that many folks have received.

CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.

My CLR access is ��on�?

I have tried

1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to ��My Windows Authentication ID�?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to ��external��
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.

I can compile BUT NOT DEPLOY

Any help would be greatly appreciated.
Regards Steve

View 8 Replies View Related

T-SQL (SS2K8) :: Inline Table-valued Function - A Severe Error Occurred

Jan 21, 2015

I'm attempting to convert some INSERT-EXEC structures into table-valued functions because the procedures are deeply nested and INSERT-EXEC doesn't like nesting (Error 3915: Cannot use the ROLLBACK statement within an INSERT-EXEC statement)

The procedure has a single select statement, so I created an inline table-valued function. When I ran it with sample data, I received this error (yes, twice):

Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

After ruling out obvious mistakes, I started to deconstruct the select statement with its CTE and TVP. The result is the following, built in my local sandbox database:

CREATE TYPE test_list AS TABLE(a int);
GO
CREATE FUNCTION test_function (@p int, @theTable test_list READONLY)
RETURNS TABLE
AS
RETURN (
WITH cte
AS (SELECT a FROM @theTable)
SELECT cte.a
FROM cte);
GO
DECLARE @t test_list;
INSERT @t VALUES(1);
SELECT * FROM test_function(1, @t);

When I run this, I get the same error as noted above. I'm running on version 10.50.4000.0, Developer Edition. (2008 R2 SP2)

The function above does just about nothing and has redundancies because I stripped the actual function down to the essential elements to cause the error. The essential elements are:

- One of the parameters is a table-valued parameter (the UDTT definition does not seem to matter)

- The SELECT statement has a CTE

- The TVP is accessed within the CTE

- The outer FROM clause references the CTE

- There is also a scalar parameter on the function (scalar type does not seem to matter).

- The scalar parameter precedes the TVP in the parameter list.

So I have an easy work-around: put the TVP first in the parameter list.

View 5 Replies View Related

Error Occurring In ExecuteSQL Task In OnPreExecute (and In OnPostExecute) But Package Not Failing

Jun 5, 2006

When any of
my tasks or script tasks in my control flow, or data flow, have an
error, the entire package, and then the calling package fail, as far as
I've seen, through some CTP versions, beta versions, and the release
version of SQL Server 2005.

But, I've just made a change, in an
sproc called from an ExecuteSQL Task in a PreExecute event attached to
a DataFlow, and that ExecuteSQL Task is reporting an error in the
output window, but the package execution is not being stopped. Why not?

I see something like so

Error: 0xC002F309 at MyExecuteSqlTaskName, Execute SQL Task: ....
Task failed: MyExecuteSqlTaskName
Warning:
0x80019002 at OnPreExecute: The Execution method succeeded, but the
number of errors raised (1) reached the maximum allowed (1); resulting
in failure. This occurs when the number of errors reaches the number
specified in MaximumErrorCount. Change the MaximumErrorCount or fix the
errors.

repeated many times in the output stream, and the same thing for the PostExecute event attached to the same object.

I'm disappointed, because I want errors propagated upwards, as I'm used to.

I
looked, and as far as I can tell, all my ExecuteSQL tasks (in events
and in the regular control flow) have the default settings of

FailPackageOnFailure: False
FailParentOnFailure: False
MaxErrorCount: 1

Do
I have to go revise these settings on every ExecuteSQL Task in every
event handler in every SSIS package? (That will be exceedingly
tedious.) Do I set these on the ExecuteSQL task inside the event? Do I
set these on the event handler itself?

View 3 Replies View Related

Code For Creating A Table In SQL From External Source

Nov 18, 2005

I'm looking to create a table in SQL using data from the as/400. I need some code that extracts it from as/400 using odbc and I need it to loop and create that table every minute.
The file its retrieving is a live file but not very large.. I need to basically poll the data. Does anyone have code for something like this..
thanks

View 8 Replies View Related

Severe Error After Installing SQL2005 SP2 Query To Linked Server Foxpro With Oledb

Oct 24, 2007

After installing sql2005 sp2 a simple select query to a linked server reports the following error message:

Msg 0, Level 11, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.Msg 0, Level 20, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.
Before installing SP2 we used sql2005 without any service packs, the linked server worked fine.

The linked server is a Visual FoxPro database.

After uninstalling and installing the 'Microsoft OLE DB Provider for Visual FoxPro 9.0' the issue stil remains.

View 3 Replies View Related