Severe Error Encountered With Synonyms

Oct 10, 2006

we now used synonyms on the version 6 of our peoject, at first it turns out good. Then we migrate a database to the new database, everythings fine, its just a data migration anyway. The target database' structure and DML's wasn't change during migration. then intermittendly, we're encountering "A severe error occurred on the current command. The results, if any, should be discarded". I said its intermittent because sometime its ok, mostly its not functioning.

This is very painfull because all our scripts has this synonym. All our scripts uses an sp execution logging stored procedured of another database so we created a synonym for those sp's instead of fully qualifying the procedure name.

This is a major issue for us, please advise. You may response here, send me email or email me. Many Thanks.

Rodel E. Dagumampan
Email: dehranph@gmail.com
Yahoo: dehranph
Blog: http://community.devpinoy.org/blogs/dehranph

View 7 Replies

A Severe Error Occurred On The Current Command.

Aug 23, 2006

I am having problems with an error that I keep receiving. The error message states "A severe error occurred on the current command. The results, if any, should
be discarded."This error is popping up when I try to call a specific stored procedure in SQL2005. The error is not specific to ASP.NET code because it also occurs if I try to run the procedure in SQL Server Management Studio. The procedure is exactly the same that is running on an SQL2000 server on a live site, so it apparently is specific to SQL2005.I have not worked much with SQL2005 or SQL cursors in the past and this code was not written by me so I am not sure where to start making changes, if any are needed.The procedure is as follows:ALTER PROCEDURE [dbo].[spGetAdmins] @userid int, @forDate datetimeASDECLARE @lngTabCount INTEGER, @lngLoopCount INTEGER, @type varchar(15), @id varchar(20), @statement varchar(1000), @useridLocal int, @forDateLocal datetimeSET @useridLocal = @useridSET @forDateLocal = @forDateDECLARE @AdminInfo TABLE (AdminID varchar(20), AdminName varchar(50)) /* check parameters */ IF (@useridLocal <= 0) BEGIN RAISERROR( 'Invalid UserID (%d)', 16, 1, @useridLocal ) END IF (@forDateLocal IS NULL) BEGIN SELECT @forDateLocal = GETDATE() ENDDECLARE profInfo CURSORLOCAL FORWARD_ONLYFOR SELECT ProfileType, ProfileValue FROM tblCSUserProfile WHERE UserID = @useridLocal and (StartDate is not null or StartDate <= @forDateLocal ) and (EndDate is null or EndDate > @forDateLocal ) ORDER BY ProfileTypeOPEN profInfoFETCH profInfo INTO @type, @idWHILE @@Fetch_Status = 0 BEGIN IF @id = '*' BEGIN INSERT INTO @AdminInfo VALUES ('*', '* Everything') END ELSE BEGIN INSERT INTO @AdminInfo SELECT adm.[ADM_CODE], adm.[ADMIN_NAM] FROM OPENROWSET('SQLOLEDB', 'server'; 'database'; 'password', [table]) AS adm WHERE adm.[ADM_CODE] = @id END FETCH profInfo INTO @type, @id ENDCLOSE profInfoDEALLOCATE profInfoSELECT DISTINCT(UPPER(AdminID)) AS AdminCodeFROM @AdminInfo GROUP BY AdminIDORDER BY AdminCode

View 1 Replies View Related

A Severe Error Occurred On The Current Command

Oct 17, 2007

Hi EveryBody,

I have got some problem in our SQL Server 2k5, Randomly the SQL Servercies stops responding on the server side and if we try to login to SQL server it gives Error "A severe error occurred on the current command"

we is there any solution to this? whenever we face this problem we need to restart the server, on few places i have seen the recomendation of SP 2, but m not sure that it will solve the problem or not.... i will appreciate if some one can can suggest me the solution??

View 4 Replies View Related

CLR UDAGG Returns Severe Error On Certain Cases

Jun 18, 2007

Hi peoples,

I have created a custom CLR user define aggregate function based on the example that i found at http://msdn2.microsoft.com/en-us/library/ms131056(SQL.90).aspx.

It works great until i discovered that it will failed if i try to do either one of the following:

query a large records e.g: more than 4k records
has IS NULL in my where clause e.g: WHERE myConcatenatedFld IS NULL

Other than these two, it works perfectly fine.

Here is the error that i got:

Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

I have attached the Concatenate class that i used in my UDAGG.

Code Snippet

using System;

using System.Data;

using System.Data.SqlClient;

using System.Data.SqlTypes;

using Microsoft.SqlServer.Server;

using System.IO;

using System.Text;

[Serializable]

[Microsoft.SqlServer.Server.SqlUserDefinedAggregate(

Format.UserDefined, //use custom serialization to serialize the intermediate result

IsInvariantToNulls = true, //optimizer property

IsInvariantToDuplicates = false, //optimizer property

IsInvariantToOrder = false, //optimizer property

MaxByteSize = 8000) //maximum size in bytes of persisted value

]

public class Concatenate : IBinarySerialize

{

/// <summary>

/// The variable that holds the intermediate result of the concatenation

/// </summary>

private StringBuilder intermediateResult;

private const int MAX_STRING_LEN = 4000;

/// <summary>

/// Initialize the internal data structures

/// </summary>

public void Init()

{

this.intermediateResult = new StringBuilder();

}

/// <summary>

/// Accumulate the next value, not if the value is null

/// </summary>

/// <param name="value"></param>

public void Accumulate(SqlString value)

{

//Dont do anything if the input is null or empty

if (value.IsNull || value.Value.Length == 0)

{

return;

}

//Skip concatenation if the output exceed 4000 chars

if (this.intermediateResult.Length + value.Value.Length > MAX_STRING_LEN)

{

return;

}

//Concatenate output

if (!this.intermediateResult.ToString().Contains(value.Value.Trim()))

this.intermediateResult.Append(value.Value.Trim()).Append(", ");

}

/// <summary>

/// Merge the partially computed aggregate with this aggregate.

/// </summary>

/// <param name="other"></param>

public void Merge(Concatenate other)

{

//Skip concatenation if the output exceed 4000 chars

if (this.intermediateResult.Length + other.intermediateResult.Length > MAX_STRING_LEN)

{

return;

}

//Concatenate computed output

this.intermediateResult.Append(other.intermediateResult);

}

/// <summary>

/// Called at the end of aggregation, to return the results of the aggregation.

/// </summary>

/// <returns></returns>

public SqlString Terminate()

{

string output = string.Empty;

//delete the trailing comma, if any

if (this.intermediateResult != null

&& this.intermediateResult.Length > 0)

{

output = this.intermediateResult.ToString(0, this.intermediateResult.Length - 2);

}

return new SqlString(output);

}

public void Read(BinaryReader r)

{

intermediateResult = new StringBuilder(r.ReadString());

}

public void Write(BinaryWriter w)

{

w.Write(this.intermediateResult.ToString());

}

}

Anyone has any idea on how to solve this issue?. Thanks

View 5 Replies View Related

SQLCMD Error - Working With Variables And Synonyms

Jan 3, 2008

Hi All,

Been doing some testing with SQLCMD and variables for installation scripts, enclosed below is some source code.
The one problem, I've been getting is the following error:

Incorrect syntax near 'certification'

This has been tested only in SSMS utilising the run in SQLCMD mode.

This error only occurs on the SQLCMD variable replacement, where it replaces $(Cert_Schema) for the word Certification.
Running the CREATE Synonym with the word Certification hard-coded into the script works.

Any ideas?
Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86) Mar 23 2007 16:28:52 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

Best Regards,

D

USE [Testing]

GO

/****** Object: Table [certification].[Table_1] Script Date: 01/03/2008 11:22:48 ******/

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

CREATE TABLE [certification].[Table_1](

[PKId] [smallint] NOT NULL,

[Name] [nchar](10) NULL,

CONSTRAINT [PK_Table_1] PRIMARY KEY CLUSTERED

(

[PKId] ASC

)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]

) ON [PRIMARY]

--- SQLCMD Script below:
-- line below should read, colon setvar cert_schema 'certification'

etvar Cert_Schema 'certification'
-- The line below fails to work for some reason

CREATE SYNONYM crt_asa FOR $(Cert_Schema).Table_1

DROP SYNONYM crt_asa

-- Hard-coded equivilant line works

CREATE SYNONYM crt_asa FOR certification.Table_1

DROP SYNONYM crt_asa

View 3 Replies View Related

A Severe Error Occurred On The Current Command. The Results, If Any, Should Be Ignored

Feb 1, 2008

I got the above error executing a stored procedure from .Net app and I isolated the issue on the following sql statement inside the sp. I executed the statement manually inside the MSSQL Mgt Studio and got the same error as above. Here is the sql statement:
SELECT F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,F13,F14,F15,F16,F17,F18,F19,F20,F21,F22,F23,F24,F25,F26,F27,F28,F29 from OpenRowset('MSDASQL', 'Driver={Microsoft Text Driver (*.txt; *.csv)};DefaultDir=E:\TPSDATA\az\;','select * from prohist.csv where f1 < 0 ')

the data file exists in the directory 'E: psdataazprohist.csv' . I'm running on SQL2005 version 9.00.3054.00. Any ideas what the problem is? Appreciate any feedback

View 4 Replies View Related

SQL 2000 A Severe Error Occurred On The Current Command.

Jan 9, 2007

I am recently getting SQLException on production sql database that uses SQL Session State. Any help on how to fix or what to look for. I also noticed some errors on the eventlog (attached below).

Error Message:

System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded

Stack Trace:

[HttpException (0x80004005): Unable to connect to SQL Server session database.]

System.Web.SessionState.SqlStateClientManager.SetAsyncWorker(String id, SessionStateItem item, Byte[] buf, Int32 length, Boolean inStorage) + 524

System.Web.SessionState.SqlStateClientManager.System.Web.SessionState.IStateClientManager.Set(String id, SessionStateItem item, Boolean inStorage) ...

EventLog:

Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 1/9/2007
Time: 9:28:34 AM
User: N/A
Computer: CompName
Description:
Error: 17803, Severity: 20, State: 12
Insufficient memory available.
Data:
0000: 8b 45 00 00 14 00 00 00 �E......
0008: 07 00 00 00 4c 00 4c 00 ....L.L.
0010: 44 00 42 00 30 00 31 00 D.B.0.1.
0018: 00 00 09 00 00 00 41 00 ......A.
0020: 53 00 50 00 53 00 74 00 S.P.S.t.
0028: 61 00 74 00 65 00 00 00 a.t.e...

View 5 Replies View Related

A Severe Error Occurred On The Current Command. The Results, If Any, Should Be Discarded.

Aug 27, 2002

Hi,

I am hosting my ASP.NET application on a Host and after some time I get this error
(Don't get it on my development machine):

A severe error occurred on the current command. The results, if any, should be discarded.

And then it says this on the same page:

Exception Details: System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

[SqlException: A severe error occurred on the current command. The results, if any, should be discarded.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +643
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) +9
ASPNetPortal.PortalSettings..ctor(Int32 tabIndex, Int32 tabId)
ASPNetPortal.Global.Application_BeginRequest(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.Execute() +60
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

I thought this is a problem with max pool size and I did it max pool size = 5000, now application runs ok for some time and then produces this error but some times this comes very soon.

As a solution, I have to copy my dll in bin directory again and application restarts and works properly but then after some time this happenes again.

Please let me know whats the problem.
I checked all of my SqlDataReaders and SqlConnections are closed properly.

Any help would be appreciated.

Thanks.

Rahul.

View 8 Replies View Related

A Severe Error Occurred On The Current Command. The Results, If Any, Should Be Discarded

Feb 26, 2008

Hi all. I am running on SQL 2005 Standard eddition SP2, Also did install " KB Article Number(s): 944929, 946608, 948490, 949118". Running on 2003 server.

Error:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

I have 2 servers. One of them is free text seach with files stored in DB. On main server there is a link back to this file DB server.

I am trying to run this script and then error from above... link_kance_doc is link to table on other server. Strange thing is when I run this same script on server 3 with same link to file DB server it works. It also works when runed on file DB server.
Also, if I dont use WHERE CONTRAINS SQL does return Dataset..

SELECT link_kance_doc.ID, link_kance_doc.DocName, link_kance_doc.DocExtension, link_kance_doc.KancelID, link_kance_doc.Comments,
link_kance_doc.CreateByUser, link_kance_doc.CreateTS, link_kance_doc.ActiveYN
FROM link_kance_doc
where Contains(*,'"murte"')

Any ideas..

Server LOG

02/26/2008 16:54:05,Server,Unknown,A user request from the session with SPID 57 generated a fatal exception. SQL Server is terminating this session. Contact Product Support Services with the dump produced in the log directory.
02/26/2008 16:54:05,Server,Unknown,Error: 17310<c/> Severity: 20<c/> State: 1.
02/26/2008 16:54:05,spid57,Unknown,External dump process return code 0x20000001.<nl/>External dump process returned no errors.
02/26/2008 16:54:04,spid57,Unknown,Stack Signature for the dump is 0x28BDEE59
02/26/2008 16:54:04,spid57,Unknown,78132A47 Module(MSVCR80+00002A47)
02/26/2008 16:54:04,spid57,Unknown,781329BB Module(MSVCR80+000029BB)
02/26/2008 16:54:04,spid57,Unknown,010B9201 Module(sqlservr+000B9201)
02/26/2008 16:54:04,spid57,Unknown,010B9064 Module(sqlservr+000B9064)
02/26/2008 16:54:04,spid57,Unknown,010B939C Module(sqlservr+000B939C)
02/26/2008 16:54:04,spid57,Unknown,010B94A5 Module(sqlservr+000B94A5)
02/26/2008 16:54:04,spid57,Unknown,010075DC Module(sqlservr+000075DC)
02/26/2008 16:54:04,spid57,Unknown,010078CC Module(sqlservr+000078CC)
02/26/2008 16:54:04,spid57,Unknown,010077A6 Module(sqlservr+000077A6)
02/26/2008 16:54:04,spid57,Unknown,0102F1F4 Module(sqlservr+0002F1F4)
02/26/2008 16:54:04,spid57,Unknown,01032A36 Module(sqlservr+00032A36)
02/26/2008 16:54:04,spid57,Unknown,01028600 Module(sqlservr+00028600)
02/26/2008 16:54:04,spid57,Unknown,0134752A Module(sqlservr+0034752A)
02/26/2008 16:54:04,spid57,Unknown,01430633 Module(sqlservr+00430633)
02/26/2008 16:54:04,spid57,Unknown,01346B6B Module(sqlservr+00346B6B)
02/26/2008 16:54:04,spid57,Unknown,013A929A Module(sqlservr+003A929A)
02/26/2008 16:54:04,spid57,Unknown,01368BB2 Module(sqlservr+00368BB2)
02/26/2008 16:54:04,spid57,Unknown,013A9BDC Module(sqlservr+003A9BDC)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013AFC6E Module(sqlservr+003AFC6E)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013AF8D0 Module(sqlservr+003AF8D0)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013B0CC7 Module(sqlservr+003B0CC7)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,013A9DC5 Module(sqlservr+003A9DC5)
02/26/2008 16:54:04,spid57,Unknown,013A9F20 Module(sqlservr+003A9F20)
02/26/2008 16:54:04,spid57,Unknown,01B2E1B9 Module(sqlservr+00B2E1B9)
02/26/2008 16:54:04,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:04,spid57,Unknown,01B24372 Module(sqlservr+00B24372)
02/26/2008 16:54:04,spid57,Unknown,0136A2D8 Module(sqlservr+0036A2D8)
02/26/2008 16:54:04,spid57,Unknown,0149C867 Module(sqlservr+0049C867)
02/26/2008 16:54:04,spid57,Unknown,0170D0CD Module(sqlservr+0070D0CD)
02/26/2008 16:54:04,spid57,Unknown,0170F7E3 Module(sqlservr+0070F7E3)
02/26/2008 16:54:04,spid57,Unknown,0170FB90 Module(sqlservr+0070FB90)
02/26/2008 16:54:04,spid57,Unknown,01702514 Module(sqlservr+00702514)
02/26/2008 16:54:04,spid57,Unknown,010A0F91 Module(sqlservr+000A0F91)
02/26/2008 16:54:04,spid57,Unknown,* Short Stack Dump
02/26/2008 16:54:04,spid57,Unknown,* -------------------------------------------------------------------------------
02/26/2008 16:54:04,spid57,Unknown,* *******************************************************************************
02/26/2008 16:54:04,spid57,Unknown,* SegSs: 00000023:
02/26/2008 16:54:04,spid57,Unknown,* Esp: 6373E24C: 00000004 00000000 6373E544 01702514 00000004 01019094
02/26/2008 16:54:04,spid57,Unknown,* EFlags: 00010206: 0055004E 0042004D 00520045 004F005F 005F0046 00520050
02/26/2008 16:54:04,spid57,Unknown,* SegCs: 0000001B:
02/26/2008 16:54:04,spid57,Unknown,* Ebp: 6373E254: 6373E544 01702514 00000004 01019094 637311EB 042DAD88
02/26/2008 16:54:04,spid57,Unknown,* Eip: 010A0F91: 103B118B B60FCD74 38B60F11 840FD72B 003D5E1C 01B8D285
02/26/2008 16:54:04,spid57,Unknown,* Edx: 042DAD48: 042DAAB8 042DA278 042DAA18 042DAD70 042DAF58 00000001
02/26/2008 16:54:04,spid57,Unknown,* Ecx: 00000004:
02/26/2008 16:54:04,spid57,Unknown,* Ebx: 05E929F8: 01622A98 00000001 00000000 00000000 00000000 00000000
02/26/2008 16:54:04,spid57,Unknown,* Eax: 01019094: 00000000 00000000 00000000 00000000 90909090 55FF8B90
02/26/2008 16:54:04,spid57,Unknown,* Esi: 00000010:
02/26/2008 16:54:04,spid57,Unknown,* Edi: 00000004:
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* dbghelp 64600000 64714FFF 00115000
02/26/2008 16:54:04,spid57,Unknown,* MSDATL3 64450000 64464FFF 00015000
02/26/2008 16:54:04,spid57,Unknown,* sqloledb 643C0000 64440FFF 00081000
02/26/2008 16:54:04,spid57,Unknown,* xpstar90 64390000 643B5FFF 00026000
02/26/2008 16:54:04,spid57,Unknown,* msadcer 64380000 64384FFF 00005000
02/26/2008 16:54:04,spid57,Unknown,* msadce 64320000 64377FFF 00058000
02/26/2008 16:54:04,spid57,Unknown,* OLEDB32R 64300000 64310FFF 00011000
02/26/2008 16:54:04,spid57,Unknown,* MSDART 64060000 64079FFF 0001a000
02/26/2008 16:54:04,spid57,Unknown,* oledb32 63FE0000 64058FFF 00079000
02/26/2008 16:54:04,spid57,Unknown,* odbcint 63FC0000 63FD6FFF 00017000
02/26/2008 16:54:04,spid57,Unknown,* ATL80 7C630000 7C64AFFF 0001b000
02/26/2008 16:54:04,spid57,Unknown,* BatchParser90 63E50000 63E6EFFF 0001f000
02/26/2008 16:54:04,spid57,Unknown,* ODBC32 63E10000 63E4CFFF 0003d000
02/26/2008 16:54:04,spid57,Unknown,* SQLSCM90 63DF0000 63DF8FFF 00009000
02/26/2008 16:54:04,spid57,Unknown,* xpstar90 63D90000 63DD8FFF 00049000
02/26/2008 16:54:04,spid57,Unknown,* msftepxy 63600000 63614FFF 00015000
02/26/2008 16:54:04,spid57,Unknown,* SQLNCLIR 00830000 00862FFF 00033000
02/26/2008 16:54:04,spid57,Unknown,* comdlg32 762B0000 762F8FFF 00049000
02/26/2008 16:54:04,spid57,Unknown,* COMCTL32 77530000 775C6FFF 00097000
02/26/2008 16:54:04,spid57,Unknown,* sqlncli 631D0000 633F3FFF 00224000
02/26/2008 16:54:04,spid57,Unknown,* CLBCatQ 777B0000 77832FFF 00083000
02/26/2008 16:54:04,spid57,Unknown,* xpsp2res 62F00000 631C4FFF 002c5000
02/26/2008 16:54:04,spid57,Unknown,* ntdsapi 766F0000 76703FFF 00014000
02/26/2008 16:54:04,spid57,Unknown,* SAMLIB 7E020000 7E02EFFF 0000f000
02/26/2008 16:54:04,spid57,Unknown,* NTMARTA 77E00000 77E20FFF 00021000
02/26/2008 16:54:04,spid57,Unknown,* wshtcpip 71AE0000 71AE7FFF 00008000
02/26/2008 16:54:04,spid57,Unknown,* hnetcfg 62E60000 62EB9FFF 0005a000
02/26/2008 16:54:04,spid57,Unknown,* dssenh 68100000 68126FFF 00027000
02/26/2008 16:54:04,spid57,Unknown,* imagehlp 76C10000 76C37FFF 00028000
02/26/2008 16:54:04,spid57,Unknown,* WINTRUST 76BB0000 76BDAFFF 0002b000
02/26/2008 16:54:04,spid57,Unknown,* dbghelp 62B00000 62C14FFF 00115000
02/26/2008 16:54:04,spid57,Unknown,* msfte 628A0000 62AF8FFF 00259000
02/26/2008 16:54:04,spid57,Unknown,* security 62210000 62213FFF 00004000
02/26/2008 16:54:04,spid57,Unknown,* rasadhlp 76F80000 76F84FFF 00005000
02/26/2008 16:54:04,spid57,Unknown,* WLDAP32 76F10000 76F3DFFF 0002e000
02/26/2008 16:54:04,spid57,Unknown,* winrnr 76F70000 76F76FFF 00007000
02/26/2008 16:54:04,spid57,Unknown,* DNSAPI 76ED0000 76EF9FFF 0002a000
02/26/2008 16:54:04,spid57,Unknown,* RESUTILS 61DC0000 61DD2FFF 00013000
02/26/2008 16:54:04,spid57,Unknown,* CLUSAPI 61DA0000 61DB1FFF 00012000
02/26/2008 16:54:04,spid57,Unknown,* WSOCK32 71BB0000 71BB8FFF 00009000
02/26/2008 16:54:04,spid57,Unknown,* VERSION 77B90000 77B97FFF 00008000
02/26/2008 16:54:04,spid57,Unknown,* MTXCLU 61D80000 61D98FFF 00019000
02/26/2008 16:54:04,spid57,Unknown,* msvcp60 61D10000 61D74FFF 00065000
02/26/2008 16:54:04,spid57,Unknown,* OLEAUT32 77D00000 77D8AFFF 0008b000
02/26/2008 16:54:04,spid57,Unknown,* MSDTCPRX 61C90000 61D08FFF 00079000
02/26/2008 16:54:04,spid57,Unknown,* XOLEHLP 61C80000 61C85FFF 00006000
02/26/2008 16:54:04,spid57,Unknown,* COMRES 77010000 770D5FFF 000c6000
02/26/2008 16:54:04,spid57,Unknown,* schannel 76750000 76776FFF 00027000
02/26/2008 16:54:04,spid57,Unknown,* cryptdll 766E0000 766EBFFF 0000c000
02/26/2008 16:54:04,spid57,Unknown,* kerberos 61BD0000 61C27FFF 00058000
02/26/2008 16:54:04,spid57,Unknown,* iphlpapi 76CF0000 76D09FFF 0001a000
02/26/2008 16:54:04,spid57,Unknown,* msv1_0 76C90000 76CB6FFF 00027000
02/26/2008 16:54:04,spid57,Unknown,* ole32 77670000 777A8FFF 00139000
02/26/2008 16:54:04,spid57,Unknown,* MSCOREE 34190000 341D4FFF 00045000
02/26/2008 16:54:04,spid57,Unknown,* AUTHZ 76C40000 76C53FFF 00014000
02/26/2008 16:54:04,spid57,Unknown,* rsaenh 68000000 68034FFF 00035000
02/26/2008 16:54:04,spid57,Unknown,* SQLOS 344D0000 344D4FFF 00005000
02/26/2008 16:54:04,spid57,Unknown,* sqlevn70 4F610000 4F7B8FFF 001a9000
02/26/2008 16:54:04,spid57,Unknown,* instapi 48060000 48069FFF 0000a000
02/26/2008 16:54:04,spid57,Unknown,* psapi 76B70000 76B7AFFF 0000b000
02/26/2008 16:54:04,spid57,Unknown,* comctl32 77420000 77522FFF 00103000
02/26/2008 16:54:04,spid57,Unknown,* IMM32 76290000 762ACFFF 0001d000
02/26/2008 16:54:04,spid57,Unknown,* SHLWAPI 77DA0000 77DF1FFF 00052000
02/26/2008 16:54:04,spid57,Unknown,* SHELL32 7C8D0000 7D0CEFFF 007ff000
02/26/2008 16:54:04,spid57,Unknown,* NETAPI32 71C40000 71C96FFF 00057000
02/26/2008 16:54:04,spid57,Unknown,* opends60 333E0000 333E6FFF 00007000
02/26/2008 16:54:04,spid57,Unknown,* USERENV 76920000 769E1FFF 000c2000
02/26/2008 16:54:04,spid57,Unknown,* WS2HELP 71BF0000 71BF7FFF 00008000
02/26/2008 16:54:04,spid57,Unknown,* WS2_32 71C00000 71C16FFF 00017000
02/26/2008 16:54:04,spid57,Unknown,* MSWSOCK 71B20000 71B60FFF 00041000
02/26/2008 16:54:04,spid57,Unknown,* MSASN1 76190000 761A1FFF 00012000
02/26/2008 16:54:04,spid57,Unknown,* CRYPT32 761B0000 76242FFF 00093000
02/26/2008 16:54:04,spid57,Unknown,* GDI32 77C00000 77C47FFF 00048000
02/26/2008 16:54:04,spid57,Unknown,* USER32 77380000 77410FFF 00091000
02/26/2008 16:54:04,spid57,Unknown,* Secur32 76F50000 76F62FFF 00013000
02/26/2008 16:54:04,spid57,Unknown,* RPCRT4 77C50000 77CEEFFF 0009f000
02/26/2008 16:54:04,spid57,Unknown,* ADVAPI32 77F50000 77FEAFFF 0009b000
02/26/2008 16:54:04,spid57,Unknown,* MSVCP80 7C420000 7C4A6FFF 00087000
02/26/2008 16:54:04,spid57,Unknown,* msvcrt 77BA0000 77BF9FFF 0005a000
02/26/2008 16:54:04,spid57,Unknown,* MSVCR80 78130000 781CAFFF 0009b000
02/26/2008 16:54:04,spid57,Unknown,* kernel32 77E40000 77F41FFF 00102000
02/26/2008 16:54:04,spid57,Unknown,* ntdll 7C800000 7C8BFFFF 000c0000
02/26/2008 16:54:04,spid57,Unknown,* sqlservr 01000000 02C09FFF 01c0a000
02/26/2008 16:54:04,spid57,Unknown,* MODULE BASE END SIZE
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* ins(*<c/>'"murte"')
02/26/2008 16:54:04,spid57,Unknown,* teTS<c/> link_kance_doc.ActiveYN FROM link_kance_doc where Conta
02/26/2008 16:54:04,spid57,Unknown,* link_kance_doc.CreateByUser<c/> link_kance_doc.Crea
02/26/2008 16:54:04,spid57,Unknown,* nce_doc.DocExtension<c/> link_kance_doc.KancelID<c/> link_kance_doc.Comments<c/>
02/26/2008 16:54:04,spid57,Unknown,* SELECT link_kance_doc.ID<c/> link_kance_doc.DocName<c/> link_ka
02/26/2008 16:54:04,spid57,Unknown,* Input Buffer 510 bytes -
02/26/2008 16:54:04,spid57,Unknown,* Access Violation occurred reading address 00000004
02/26/2008 16:54:04,spid57,Unknown,* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
02/26/2008 16:54:04,spid57,Unknown,* Exception Address = 010A0F91 Module(sqlservr+000A0F91)
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* 02/26/08 16:54:04 spid 57
02/26/2008 16:54:04,spid57,Unknown,* BEGIN STACK DUMP:
02/26/2008 16:54:04,spid57,Unknown,*
02/26/2008 16:54:04,spid57,Unknown,* *******************************************************************************
02/26/2008 16:54:04,spid57,Unknown,SqlDumpExceptionHandler: Process 57 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
02/26/2008 16:54:04,spid57,Unknown,***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0063.txt
02/26/2008 16:54:04,spid57,Unknown,Using 'dbghelp.dll' version '4.0.5'
02/26/2008 16:54:03,Server,Unknown,A user request from the session with SPID 57 generated a fatal exception. SQL Server is terminating this session. Contact Product Support Services with the dump produced in the log directory.
02/26/2008 16:54:03,Server,Unknown,Error: 17310<c/> Severity: 20<c/> State: 1.
02/26/2008 16:54:03,spid57,Unknown,External dump process return code 0x20000001.<nl/>External dump process returned no errors.
02/26/2008 16:54:02,spid57,Unknown,Stack Signature for the dump is 0x28BDEE59
02/26/2008 16:54:02,spid57,Unknown,78132A47 Module(MSVCR80+00002A47)
02/26/2008 16:54:02,spid57,Unknown,781329BB Module(MSVCR80+000029BB)
02/26/2008 16:54:02,spid57,Unknown,010B9201 Module(sqlservr+000B9201)
02/26/2008 16:54:02,spid57,Unknown,010B9064 Module(sqlservr+000B9064)
02/26/2008 16:54:02,spid57,Unknown,010B939C Module(sqlservr+000B939C)
02/26/2008 16:54:02,spid57,Unknown,010B94A5 Module(sqlservr+000B94A5)
02/26/2008 16:54:02,spid57,Unknown,010075DC Module(sqlservr+000075DC)
02/26/2008 16:54:02,spid57,Unknown,010078CC Module(sqlservr+000078CC)
02/26/2008 16:54:02,spid57,Unknown,010077A6 Module(sqlservr+000077A6)
02/26/2008 16:54:02,spid57,Unknown,0102F1F4 Module(sqlservr+0002F1F4)
02/26/2008 16:54:02,spid57,Unknown,01032A36 Module(sqlservr+00032A36)
02/26/2008 16:54:02,spid57,Unknown,01028600 Module(sqlservr+00028600)
02/26/2008 16:54:02,spid57,Unknown,0134752A Module(sqlservr+0034752A)
02/26/2008 16:54:02,spid57,Unknown,01430633 Module(sqlservr+00430633)
02/26/2008 16:54:02,spid57,Unknown,01346B6B Module(sqlservr+00346B6B)
02/26/2008 16:54:02,spid57,Unknown,013A929A Module(sqlservr+003A929A)
02/26/2008 16:54:02,spid57,Unknown,01368BB2 Module(sqlservr+00368BB2)
02/26/2008 16:54:02,spid57,Unknown,013A9BDC Module(sqlservr+003A9BDC)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013AFC6E Module(sqlservr+003AFC6E)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013AF8D0 Module(sqlservr+003AF8D0)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013B0CC7 Module(sqlservr+003B0CC7)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,013A9DC5 Module(sqlservr+003A9DC5)
02/26/2008 16:54:02,spid57,Unknown,013A9F20 Module(sqlservr+003A9F20)
02/26/2008 16:54:02,spid57,Unknown,01B2E1B9 Module(sqlservr+00B2E1B9)
02/26/2008 16:54:02,spid57,Unknown,013A9A04 Module(sqlservr+003A9A04)
02/26/2008 16:54:02,spid57,Unknown,01B24372 Module(sqlservr+00B24372)
02/26/2008 16:54:02,spid57,Unknown,0136A2D8 Module(sqlservr+0036A2D8)
02/26/2008 16:54:02,spid57,Unknown,0149C867 Module(sqlservr+0049C867)
02/26/2008 16:54:02,spid57,Unknown,0170D0CD Module(sqlservr+0070D0CD)
02/26/2008 16:54:02,spid57,Unknown,0170F7E3 Module(sqlservr+0070F7E3)
02/26/2008 16:54:02,spid57,Unknown,0170FB90 Module(sqlservr+0070FB90)
02/26/2008 16:54:02,spid57,Unknown,01702514 Module(sqlservr+00702514)
02/26/2008 16:54:02,spid57,Unknown,010A0F91 Module(sqlservr+000A0F91)

View 1 Replies View Related

DBCC SHRINKFILE Gives A Severe Error Occurred On The Current Command.

Oct 14, 2007

I am using SQL Server SP 2 on Windows 2003 Server Standard edition:

Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)

I have a datbase that's rather large. The log file is 94656 pages, and the data file itself is 94197200 pages. There's only one data file and one log file. The database passes DBCC CHEKCDATABASE with no errors.

When I run DBCC SHRINKDATABASE against the database, the command runs for about twenty seconds then produces this error:

Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

I can't find anything interesting in the ERRORLOG around the time that I run this command. The error appears if I use the TRUNCATEONLY option or not.

How do I fix this problem?

And in general, why are the engine errors in SQL Server so confusing and not directly actionable?

View 1 Replies View Related

T-SQL (SS2K8) :: Inline Table-valued Function - A Severe Error Occurred

Jan 21, 2015

I'm attempting to convert some INSERT-EXEC structures into table-valued functions because the procedures are deeply nested and INSERT-EXEC doesn't like nesting (Error 3915: Cannot use the ROLLBACK statement within an INSERT-EXEC statement)

The procedure has a single select statement, so I created an inline table-valued function. When I ran it with sample data, I received this error (yes, twice):

Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

After ruling out obvious mistakes, I started to deconstruct the select statement with its CTE and TVP. The result is the following, built in my local sandbox database:

CREATE TYPE test_list AS TABLE(a int);
GO
CREATE FUNCTION test_function (@p int, @theTable test_list READONLY)
RETURNS TABLE
AS
RETURN (
WITH cte
AS (SELECT a FROM @theTable)
SELECT cte.a
FROM cte);
GO
DECLARE @t test_list;
INSERT @t VALUES(1);
SELECT * FROM test_function(1, @t);

When I run this, I get the same error as noted above. I'm running on version 10.50.4000.0, Developer Edition. (2008 R2 SP2)

The function above does just about nothing and has redundancies because I stripped the actual function down to the essential elements to cause the error. The essential elements are:

- One of the parameters is a table-valued parameter (the UDTT definition does not seem to matter)

- The SELECT statement has a CTE

- The TVP is accessed within the CTE

- The outer FROM clause references the CTE

- There is also a scalar parameter on the function (scalar type does not seem to matter).

- The scalar parameter precedes the TVP in the parameter list.

So I have an easy work-around: put the TVP first in the parameter list.

View 5 Replies View Related

Severe Error Occurring When Creating Assembly With External Access Permission

Jul 11, 2006

I had created a CLR function in my db and was able to execute it successfully a couple of months ago. But when I tried to execute it today it was throwing errors saying there was something wrong with the permissions on the assembly. So I decided to drop everything and recreate it except I can not longer create the assembly with EXTERNAL ACCESS permissions. Whenever I try to create the assembly I get the followng error:

Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

Msg 0, Level 20, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

I also tried to create the assembly with Unsafe permissions and got the same error. Does anyone know why this error would be occurring now? I tried creating the same assembly on a different SQL 2005 server and it creates successfully and can be executed successfully. Any help would be greatly appreciated!!

Thanks!

GN

View 3 Replies View Related

Severe Error After Installing SQL2005 SP2 Query To Linked Server Foxpro With Oledb

Oct 24, 2007

After installing sql2005 sp2 a simple select query to a linked server reports the following error message:

Msg 0, Level 11, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.Msg 0, Level 20, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.
Before installing SP2 we used sql2005 without any service packs, the linked server worked fine.

The linked server is a Visual FoxPro database.

After uninstalling and installing the 'Microsoft OLE DB Provider for Visual FoxPro 9.0' the issue stil remains.

View 3 Replies View Related

Error: Fcb::close-flush: Operating System Error 21(The Device Is Not Ready.) Encountered

May 23, 2007

We are using sql server 2005 Enterprise Edition with service pack1

I got the following error messages in the SQL log

The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
fcb::close-flush: Operating system error 21(The device is not ready.) encountered.

I got these errors for about 2 hrs and after that I see these messages in the sql log

Starting up database ' '
1 transactions rolled forward in database '' (). This is an informational message only. No user action is required.
0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required.
Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required.
CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.

Can anyone please help me in troubleshooting this issue. Why this migh have happened.

any help would be appreciated.

Thanks

View 5 Replies View Related

Event ID: 17053 - Operating System Error 112(error Not Found) Encountered

Jun 20, 2007

Hi there

I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.

I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.

It reads in the description

c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:

Operating system error 112(error not found) encountered.

Looking in the error log I see :

Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.

Error: 17053, Severity: 16, State: 1.

C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.

DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.

This is a new server with about 90% of disk space NTFS still available

Any idea's thanks.

View 5 Replies View Related

Error: 5123 CREATE FILE Encountered Operating System Error 5A(Access Denied.)

Mar 22, 2006

HI ,

This is a problem I encountered when I had to detach a database file (type .mdf):

1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.

2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful

3) However when I tried reattaching the database file, I got this error:

CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'

Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?

Thanks much

Tonante

View 42 Replies View Related

Error Encountered UNC Path Error During Remote Installation

Jun 17, 2006

Good day good people of the forum while carrying out a remote installation i encountered an UNC path error can anyone be of help giving me a comprehensive answer to the problem. am stuck i cant move ahead from that part of the installation

View 1 Replies View Related

Divide By Zero Error Encountered

Oct 31, 2013

I have one table with columns patientName , Nurse,ArrivalDate, DepartDate . It has all the patiet information for all the Nurses.

I am calculating Average Number of patients per day per nurse by using below query

SELECT Nurse,
COUNT(DISTINCT patientName) AS NoOfPatients,
COUNT(DISTINCT patientName) * 1.0/COUNT(DISTINCT ArrivalDate) AS [AvgNo.ofpatientsPerDay]
FROM Table t
GROUP BY NURSE

but if ArrivalDate is Null I am getting below error saying that Divide by zero error encountered.

View 5 Replies View Related

Divide By Zero Error Encountered.

Dec 3, 2007

How can i handle this kind of error in my execution of my storedprocedure? Error:Divide by zero error encountered.

thanks!

Funnyfrog

View 3 Replies View Related

Error Encountered While Executing A UDF

Nov 28, 2006

Hi,

I get the following error while trying to execute a UDF.

Msg 6522, Level 16, State 1, Line 1

A .NET Framework error occurred during execution of user defined routine or aggregate 'test':

System.NullReferenceException: Object reference not set to an instance of an object.

System.NullReferenceException:

at SalesCentral_Database.UserDefinedFunctions.udfTest()

My function is defined as follows:

Imports System

Imports System.Data

Imports System.Data.SqlClient

Imports System.Data.SqlTypes

Imports Microsoft.SqlServer.Server

Partial Public Class UserDefinedFunctions

<Microsoft.SqlServer.Server.SqlFunction(DataAccess:=DataAccessKind.Read)> _

Public Shared Function udfTest() As SqlString

SqlContext.Pipe.Send(System.DateTime.Now().ToString())

Dim conn As New SqlConnection("context connection=true")

conn.Open()

Dim cmd As New SqlCommand("SELECT MAX(ACCTPERIOD) FROM TBL_OPPORTUNITY_HIS", conn)

Return New SqlString(cmd.ExecuteScalar().ToString())

End Function

End Class

SQL Server

CREATE ASSEMBLY SalesCentral_Database from '\isew5l6c ranfSFS_SalesSalesCentral_Database.dll' WITH PERMISSION_SET = SAFE

CREATE FUNCTION test() RETURNS NVARCHAR(10) AS EXTERNAL NAME [SalesCentral_Database].[SalesCentral_Database.UserDefinedFunctions].[udfTest]

SELECT dbo.test()

- Here I get the error mentioned above. Can anyone please tell me what am I missing.

Thanks.

View 3 Replies View Related

Transact SQL :: Divide By Zero Error Encountered

Jun 18, 2015

My Code is

SELECT Client,State,
CASE WHEN Weight>=11 and Weight<=455 and Height>=110 and Height<=250
THEN isnull((cast(nullif(Weight,0)/power((NullIf(Weight,0)/100),2) as int)),0) else -1 end as BaseBMIScore
FROM Test100

And I got following error:

Msg 8134, Level 16, State 1, Line 1
Divide by zero error encountered.

View 4 Replies View Related

Workaround Divide By Zero Error Encountered Message

Jan 7, 2004

Hey all,

When i exec an sp it runs a sum, sometimes it is possible that there is a 0 value, it then returns an error Divide by zero error encountered
How can i work around this error

My sp code is

CREATE proc CP_avgloss_rings
@mID varchar(10),
@startdate datetime,
@enddate datetime
as
select ((sum(vtp)-(sum(moneyout)))/100) / ((sum(playtime))/ 3600) as avgloss
from dbo.rings
where
machineID = @mID
and convert(varchar,njdate,121)
between convert(varchar,@startdate,121)
and convert(varchar,@enddate,121)
GO

Maybe someone can help me
Cheers Wimmo

View 4 Replies View Related

SQL 2012 :: Get Column Name Within SSIS When Error Is Encountered

Aug 21, 2015

I have a dtsx import script which import a delimeted csv file into a sql 2012 table. The default of the output length for all columns is set to 50 characters.All records which do not comply goes to another table in the same database. When I ran the script,all the records goes to the error table. I have now found a way to retrieve the column id and the error message to find that some column are been truncated and do not import.

I now need to know which column is given the error. The import file have more than 300 columns and I do not want to go and check each column length.I am using visual studio 2010 and using visual basic. I have found a sample of C+,but the screen shots is very small and when I type in the command,i do not compile.

We have over 400 import scripts and I could really use this in all of them to trouble shoot.

View 5 Replies View Related

Divide By Zero Error Encountered - Null Value Eliminated

Mar 19, 2015

I'm getting this error:

Divide by zero error encountered.
Warning: Null value is eliminated by an aggregate or other SET operation.

this is where i'm getting the error:

CASE WHEN Claims.ClaimTotal > 0 then (ISNULL(Claims.ClaimTotal,0) / ISNULL(TotalPrem.TotalPrem,dbo.TrnPolicy.TotalDue)) else 0 END AS LossRatio

View 3 Replies View Related

Error Encountered While Starting The SSIS Service

Dec 11, 2006

I installed SQL Server 2005 Integration services on Windows XP machine. Then I went to the SQL Server Configuration Manager and tried to Start the SSIS service. The "Log On As" value is "NT AUTHORITYNetworkService". But I get the follwoing error:

The request failed or the service did not respond in a timely fashion. COnsult the event log or other applicable error logs for details.

Event Log details:
------------------
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I tried running the service using the "Local Service" and the "Local System" accounts also, but am still encountering the same error. What do I do...

View 2 Replies View Related

An Error Message I Encountered During Remote Installation

Jun 22, 2006

Good day good people of the forum thanks for the response this is the error message i encountered "an error occured while attempting to validate the setup source files unc path. verify that you have entered a valid unc path."

View 1 Replies View Related

OLEDB Error Encountered Calling ICommandText:: Execute

Aug 4, 2007

OLEDB error encountered calling ICommandText:: execute ; hr = 0x80040e14 .
SQLSTATE : 42000 , Native Error : 3013
Error state 1 , Severity : 16
Source : Microsoft OLE DB Provider for SQL Server
Error Message : Backup Database is terminating abnormally

View 1 Replies View Related

The ExistsOnSQLServer Method Has Encountered OLE DB Error Code 0x80004005

Oct 2, 2006

I export data from a dozen tables of one database to another database on another server regularly and it works well. However, if i choose the option of "save SSIS package", I get the following error:

TITLE: SQL Server Import and Export Wizard
------------------------------

The operation could not be completed.

------------------------------
ADDITIONAL INFORMATION:

The ExistsOnSQLServer method has encountered OLE DB error code 0x80004005 (Client unable to establish connection). The SQL statement issued has failed.

------------------------------
BUTTONS:

OK
------------------------------

I use management studio to do this, but the servers are 2000.

Does anyone have any clue about this?

View 3 Replies View Related

Error:sql Mobile Encountered Problems When Opening The Database

Nov 26, 2006

I am trying to deploy my mobile app to treo 700wx, but when i test the app, the application gives me an error message:

sql mobile encountered problems when opening the database

It happens when I sync data.

However, when I sync data users and customer info, it doesn't give this message, But when I sync (third time) order info, this message comes out.

--when i run on my PPC (HP ra1950), there is no this error message.

I think it is a bug?

BTW, which cabs file should I install on the Treo phone? (.Net ce, sql ce mobile30 ???)

Please help me out. Thanks

James

View 3 Replies View Related

Error Encountered While Installing SQL Server Express Edition

Dec 20, 2005

I encountered an error when attempting to install Visual Basic Express Edition RTM. During the setup, I selected MSDN Express Edition and SQL Server 2005 Express Edition. Specifically, the SQL Server 2005 EE part of the installation failed. Here's the error I received:

Visual Basic 2005 Express Edition Setup
Error occurred during setup
Visual Basic 2005 Express Edition has been successfully installed.
The following component failed to install:
Microsoft SQL Server 2005 Express Edition x86

I had not installed any betas on this particular PC; however, I had already installed Visual Studio 2005 Pro and SQL Server 2005 Developer Edition.

(I selected SQL Server EE during the VBEE install because the VBEE readme said that the VSEE Editions (except for VWD) only work with SQL Server EE--so I figured I had to install SQL Server EE if I wanted to do any database work with VBEE. Is that the case?)

The following two log files were the only ones containing any error messages. How should I proceed?

C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core.log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:40:32 2005
Process ID      : 5824
c:211395ac6e4ed715363fsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:40:31
Complete: LoadResourcesAction at: 2005/11/19 14:40:31, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:40:31
Loaded DLL:c:211395ac6e4ed715363fxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:40:32, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:40:32
Complete: ValidateWinNTAction at: 2005/11/19 14:40:32, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:40:32
Complete: ValidateMinOSAction at: 2005/11/19 14:40:32, returned true
Running: PerformSCCAction at: 2005/11/19 14:40:32
Complete: PerformSCCAction at: 2005/11/19 14:40:32, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:40:32
Complete: ActivateLoggingAction at: 2005/11/19 14:40:32, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5824" returned false.
Running: PerformSCCAction2 at: 2005/11/19 14:40:32
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Complete: PerformSCCAction2 at: 2005/11/19 14:40:33, returned true
Running: PerformDotNetCheck at: 2005/11/19 14:40:33
Complete: PerformDotNetCheck at: 2005/11/19 14:40:33, returned true
Running: ComponentUpdateAction at: 2005/11/19 14:40:33
Complete: ComponentUpdateAction at: 2005/11/19 14:41:6, returned true
Running: DetectLocalBootstrapAction at: 2005/11/19 14:41:6
Complete: DetectLocalBootstrapAction at: 2005/11/19 14:41:6, returned true
Running: LaunchLocalBootstrapAction at: 2005/11/19 14:41:6
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1706
Aborting queue processing as nested installer has completed
Message pump returning: 1706

C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core(Local).log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:41:10 2005
Process ID      : 5476
c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:41:9
Complete: LoadResourcesAction at: 2005/11/19 14:41:9, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:41:9
Complete: ValidateWinNTAction at: 2005/11/19 14:41:9, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:41:9
Complete: ValidateMinOSAction at: 2005/11/19 14:41:9, returned true
Running: PerformSCCAction at: 2005/11/19 14:41:9
Complete: PerformSCCAction at: 2005/11/19 14:41:9, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:41:9
Complete: ActivateLoggingAction at: 2005/11/19 14:41:10, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5476" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2005/11/19 14:41:10
Complete: PerformDotNetCheck2 at: 2005/11/19 14:41:12, returned true
Running: InvokeSqlSetupDllAction at: 2005/11/19 14:41:12
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [US05046]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = US05046, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = US05046, Article = XMLDomDocument, Result = 0 (0x0)
Machine = US05046, Article = Processor, Result = 0 (0x0)
Machine = US05046, Article = PhysicalMemory, Result = 0 (0x0)
Machine = US05046, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = US05046, Article = OSVersion, Result = 0 (0x0)
Machine = US05046, Article = OSServicePack, Result = 0 (0x0)
Machine = US05046, Article = OSType, Result = 0 (0x0)
Machine = US05046, Article = AdminShare, Result = 0 (0x0)
Machine = US05046, Article = PendingReboot, Result = 0 (0x0)
Machine = US05046, Article = IEVersion, Result = 0 (0x0)
Machine = US05046, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = US05046, Article = COMPlus, Result = 0 (0x0)
Machine = US05046, Article = ASPNETVersionRegistration, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: US05046
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2005/11/19 14:42:59, returned true
Running: SetPackageInstallStateAction at: 2005/11/19 14:42:59
Complete: SetPackageInstallStateAction at: 2005/11/19 14:43:1, returned true
Running: DeterminePackageTransformsAction at: 2005/11/19 14:43:1
Complete: DeterminePackageTransformsAction at: 2005/11/19 14:43:5, returned true
Running: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5
Complete: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5, returned true
Running: OpenPipeAction at: 2005/11/19 14:43:5
Complete: OpenPipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2005/11/19 14:43:5
Complete: CreatePipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2005/11/19 14:43:5
Complete: PopulateMutatorDbAction at: 2005/11/19 14:43:5, returned true
Running: GenerateRequestsAction at: 2005/11/19 14:43:5
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = -1
SQL_SharedTools = 3
SQL_BC_DEP = -1
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = -1
SQL_WarehouseDevWorkbench = -1
SDK = 3
SQLXML = -1
Tools_Legacy = -1
TOOLS_BC_DEP = -1
SQL_Documentation = -1
SQL_BooksOnline = -1
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2005/11/19 14:43:11, returned true
Running: CreateProgressWindowAction at: 2005/11/19 14:43:11
Complete: CreateProgressWindowAction at: 2005/11/19 14:43:12, returned false
Error: Action "CreateProgressWindowAction" failed during execution.
Running: ScheduleActionAction at: 2005/11/19 14:43:12
Complete: ScheduleActionAction at: 2005/11/19 14:43:13, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2005/11/19 14:43:14
Installing: sqlsupport on target: US05046
Complete: InstallSqlAction.11 at: 2005/11/19 14:43:26, returned true
Running: InstallSqlAction.12 at: 2005/11/19 14:43:26
Installing: sqlncli on target: US05046
Complete: InstallSqlAction.12 at: 2005/11/19 14:43:40, returned true
Skipped: InstallSqlAction.18
Skipped: Action "InstallSqlAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.21 at: 2005/11/19 14:43:40
Installing: sqlwriter on target: US05046
Failed to install package
Fatal error during installation.
Setting package return code to: 1706
Complete: InstallSqlAction.21 at: 2005/11/19 14:43:50, returned false
Error: Action "InstallSqlAction.21" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: InstallSqlAction.22
Skipped: Action "InstallSqlAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.9 at: 2005/11/19 14:43:50
Installing: msxml6 on target: US05046
Complete: InstallSqlAction.9 at: 2005/11/19 14:43:54, returned true
Running: InstallToolsAction.11 at: 2005/11/19 14:43:54
Installing: sqlsupport on target: US05046
Complete: InstallToolsAction.11 at: 2005/11/19 14:44:2, returned true
Running: InstallToolsAction.12 at: 2005/11/19 14:44:2
Installing: sqlncli on target: US05046
Complete: InstallToolsAction.12 at: 2005/11/19 14:44:11, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.18
Skipped: Action "InstallToolsAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.20
Skipped: Action "InstallToolsAction.20" was not run. Information reported during analysis:
No install request found for package: "BOL", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.22
Skipped: Action "InstallToolsAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.9 at: 2005/11/19 14:44:11
Installing: msxml6 on target: US05046
Complete: InstallToolsAction.9 at: 2005/11/19 14:44:15, returned true
Action "InstallSqlAction" will return false due to the following preconditions:
Condition "Action: InstallSqlAction.21 has finished and failed." returned true.
Installation of package: "sql" failed due to a precondition.
Step "InstallSqlAction" was not able to run.
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallToolsAction at: 2005/11/19 14:44:15
Installing: tools on target: US05046
Complete: InstallToolsAction at: 2005/11/19 14:44:26, returned true
Skipped: InstallToolsAction.10
Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2005/11/19 14:44:27
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1706
        Error Code: 0x800706aa (1706)
Windows Error Text: The endpoint format is invalid.

Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
     Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097

---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
sqls::HighlyAvailablePackage::manageVsResources
ce: 29539

Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_US05046_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0003.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2005/11/19 14:44:52
Message pump returning: 1706

View 2 Replies View Related

Report Server Has Encountered A SharePoint Error. (rsSharePointError)

Apr 4, 2008

Ive seen this asked all over but am yet to find a fix for my case.

I have 1 SharePoint 2007 server
1 SQL 2005 SP2 server with Reporting services running

Reporting services is configured and running all with ticks in SharePoint integration mode, the reporting services section shows up in Central Admin ok.

When I try to access reporting services I get the error :

http://reports.domain/reportserver

Report Server has encountered a SharePoint error. (rsSharePointError) Get Online Help

For more information about this error navigate to the report server on the local server machine, or enable remote errors Looking thru the logs I get the error :

w3wp!library!d!04/04/2008-13:54:20:: Call to GetItemTypeAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListParentsAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListChildrenAction(/, False).
w3wp!library!d!04/04/2008-13:54:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.internalFindObjectsNonRecursive(String wssUrl, CatalogItemList& children)
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.FindObjectsNonRecursive(String wssUrl, CatalogItemList& childList, Security secMgr, IPathTranslator pathTranslator, Boolean appendMyReports)
--- End of inner exception stack trace ---

I setup a new website called RS Web Site in IIS on the SQL box, I then set this in the Configure Report Server. I have made sure Annonymous access is off.

Does anyone know how on earth I can resolve this ..

Many Thanks

Marcus

View 2 Replies View Related

Divide By Zero Error Encountered. Error

Mar 17, 2008

the query is below ;

Select Model, Kota as [Çıkan Anket]
,
(Select Count(*) From dbo.Main Where RuhsatSahibiModel = tt.Model) as [Verilen Adres] , (Select Count(RuhsatSahibiSahisID) From dbo.Main Where DurumKoduID in(1,2,3,4,5,6,9,12,13,14,15,16,17,20,21,22,23,24,25,26,27,28) and RuhsatSahibiModel = tt.Model) as [Donen Adres]

,

(Select Count(*) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model) as [Donen Anket] ,((Select cast(Count(*) as decimal(2,0)) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model ) / (Select top 1 (cast(Kota as decimal(2,0))) From dbo.Model Where Model = tt.Model))*100 as [Oran]

,

(Kota - (Select Count(*) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model)) as [Kalan Anket] , ((Select Count(*) From dbo.Main Where RuhsatSahibiModel = tt.Model)- (Select Count(RuhsatSahibiSahisID) From dbo.Main Where DurumKoduID in(1,2,3,4,5,6,9,12,13,14,15,16,17,20,21,22,23,24,25,26,27,28) and RuhsatSahibiModel = tt.Model)) as [Kalan Adres]

From

(SELECT Model, SUM(Kota) AS Kota FROM dbo.Model GROUP BY Model) as tt where tt.Model in('A3')

it's returning error message : "Divide by zero error encountered."

View 3 Replies View Related

Receiving Error 'SQL Server Everywhere Encountered Problems When Opening The Database' Trying To Connect To Mobile Sdf.

May 13, 2008

Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?

Cheers Al

Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password

repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try

View 3 Replies View Related