Is there an expression syntax that will do this? Does it have something to do with ROWNUMBER().
Any help is greatly appreciated! Thanks in advance! Probably an easy one for you gurus out there!
Is there a way to set up line shading on a report that is created from a table in SRS? The report is great but I want to shade every other line to make it easy to read and being a beginner with SRS I have not been able to find a way to do this.
Any help would be appreciated.
Thanks,
sql 7.0 is installed on an nt server machine and after that i installed a new hardware, rebooted the machine the i got the blue screen of death. what should i do, should i install sql server again or can i rebuild sql from the registry
thanks
thanveer
if you encountera problem of blue screen and then you reinstall NT server, what is the quickest way to restore sql back. after installation of windows nt sql will not start, please advice anyone who knows
View 1 Replies View RelatedTechnical information:
***STOP: 0X0000008E (0XC0000005, 0X8062C26B, 0XA84E5A58, 0X00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support goup for further assistance.
What can i do to fix this problemHelp please, don't want to reinstall XP because i am running AutoCad on my PC.
This Blue screen of death is the worst!!!
Keron
Just trying to find out what this error code is, and how to solve this. I have the infamous "blue screen of death" but I cannot get XP to load or even to load in "safe mode". I am hoping to save my files on this laptop.
Here is the error:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacurer for driver updates. Try changing the video adapters.
Check with your harware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
***STOP: 0X0000008E (0XC0000005, 0X8062C26B, 0XA84E5A58, 0X00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support goup for further assistance.
I have tried to change my memory but that didn't seem to help. Any ideas?
Thanks for a reply,
Shan
I am hoping someone can guide me through this error. It appears SQL Server 2005 Management Studio might have a bug. What I am accomplishing deleting several rows from several tables inside SSMS. However, after about 4 or five deletions, I get the BLUE SCREEN of DEATH.
I can repeat this pattern.
Thanks for taking the time to read my post.
When starting SQL and also (not in addition to) another program the monitor flashes between a black and also a blue screen. On several occurances, I noticed the words "extracting file to ..." run donw the screen. However, after ten or twelve times of this flashing, the programs appear to run normally. Can anyone speak to a possible cause for this flashing?
V/r
Scott
Hi,
I have a MS Reporting Services Report which I display in a ASPX page inside a iFrame (i.e. an other ASPX page displayed inside the main ASPX page).
The report is rendered to the screen using the normal ReportViewer control.
Everything works fine, except when I click on the Print Button on the ReportViewer control, I get a Blue Screen of Death (BSOD) and my computer restarts.
This is something that happens every single time I click on that Print button
Has this happenend to anyone else?
Regards,
Thysie
Hi all,
View 5 Replies View RelatedI'm pretty sure this problem started after applying Windows 2000 SP2 on machines running SQL 7 SP3. It may be that I only started manipulating these particular DTS jobs since that upgrade.
Problem: In EM I open a DTS package and it causes the server machine to crash to a blue screen. This has happened from a Windows 98 workstation running against a Windows 2000 Server SP2 running SQL7 SP3 and on a standalone laptop running Windows 2000 SP2 running SQL7 desktop edition SP3
Can anyone point me to more information on why this is happening?
Thanks
Doug
When I try to print a report ( report viewer control from ASP.NET application). The print dialog box opens, once I select the printer and click ok. It show €œprinting 1 page€? for 3-4 seconds and the System(computer)crashes and displays a blue screen error. This is happening for only two of my reports. And currently we have disabled the print button for these.
View 7 Replies View RelatedI have had this issue just pop up. I have local users who can connect fine, but my users that require connection by VPN cannot connect. I get the server not available or access denied error. I did confirm that the VPN'ers are connected to the network correctly and can see that their shares and mappings are correct. Any ideas? Thanking you all in advance!!
View 6 Replies View RelatedI have 3 tables...
JobRequirements (A)
JobID int
QualificationTypeID int
EmployeeQualifications (B)
EmployeeID int
QualificationTypeID int
Employee (C)
EmployeeID int
EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
Hi All,
I am using sql server 2005. I stuck out in a strange problem.
I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
But nothing is improving
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
Any sort of help would be highly appreciated.
Thanks,
I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.
How I can use this variable to email fellow users. Â For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Any sort of help would be highly appreciated.
Thanks,
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Hi i tried designing a SSIS package which loads only those rows which were different from existing rows in the table , i need to timestamp the existing row with an inactive date when a update of that row is inserted (ex: same studentID )
and the newly inserted row with a insert time stamp
so as to indicate the new row as currently active, in short i need to maintain history and current rows in same table , i tried using slowly changing dimension but could not figure out, anyone experience or knowledge regarding the Data loads please respond.
example of Data would be like
exisiting data
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
New row to insert would be
12 DDS 15 M DFG ST 4/5/07
the data should reflect
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 4/5/07
12 DDS 15 M DFG ST 4/5/07 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
Please provide your input as much as you can even though it might not be a 100% solution.
I had created a trigger which sees that whether a database is updated if it is its copy the values of the updated row into another control table now I want to read the content of control_table into BIzTalk and after reading I want to delete it.Can any one suggest the suitable ay to do this?
View 3 Replies View Related I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
Environment:
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows
2) importing each column into sql table
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.Â
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
I managed to transpose rows into columns.
;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger   Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
Dear All
I have a table with the following structure in sql server 2005
create table app(
sno int,
name varchar(50),
add varchar(50),
city varchar(50),
state varchar(50)
)
it contains the follwing data
------------------------------------------
sno name add city state
------------------------------------------
1 mark street no1 newcity newstate
2 mark street no1 newcity newstate
3 mark street no1 newcity newstate
4 mark street no1 newcity newstate
5 mark street no1 newcity newstate
6 mark street no1 newcity newstate
7 mark street no1 newcity newstate
8 mark street no1 newcity newstate
9 mark street no1 newcity newstate
10 mark street no1 newcity newstate
11 mark street no1 newcity newstate
12 mark street no1 newcity newstate
13 mark street no1 newcity newstate
14 mark street no1 newcity newstate
15 mark street no1 newcity newstate
16 mark street no1 newcity newstate
17 mark street no1 newcity newstate
18 mark street no1 newcity newstate
19 mark street no1 newcity newstate
20 mark street no1 newcity newstate
----------------------------------------
I want to retrive previous 5 records, next 5 records and the record that meet the where condition of a select query.
When I run
select sno,add,name,city,state from app where sno=7
I want the following result
------------------------------------------
sno name add city state
------------------------------------------
2 mark street no1 newcity newstate |
3 mark street no1 newcity newstate |
4 mark street no1 newcity newstate | -- previous 5 records
5 mark street no1 newcity newstate |
6 mark street no1 newcity newstate |
7 mark street no1 newcity newstate --- searched record
8 mark street no1 newcity newstate |
9 mark street no1 newcity newstate |
10 mark street no1 newcity newstate |--- next 5 records
11 mark street no1 newcity newstate |
12 mark street no1 newcity newstate |
----------------------------------------
if there is a method to get the above result set, kindly post the query.
Hi, I need to write a query which I have never attempted before and could do with some help.... I have a Groups table and a Users_Groups look up table. In this model, users can only be assigned to 1 group. If a group is deleted, a trigger should fire and delete any rows in User_Groups having a matching Groups.Ref. Unfortunately, the trigger hasn't been firing and I now have a load of defunct rows in Users_Groups relating users to groups which do not exist.I now need to find all of these defunct rows in Users_Groups so that I can delete them. How can I find rows in Users_Groups where the parent rows and refs in Groups are null? I've tried searching the net for something similar but don't even know how to word the search properly to get any half relevant results. Cheers PS, I do realise I need to tighten the constraints on my database
View 5 Replies View RelatedI'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
Dear Gurus,I have table with following entriesTable name = CustomerName Weight------------ -----------Sanjeev 85Sanjeev 75Rajeev 80Rajeev 45Sandy 35Sandy 30Harry 15Harry 45I need a output as followName Weight------------ -----------Sanjeev 85Rajeev 80Sandy 30Harry 45ORName Weight------------ -----------Sanjeev 75Rajeev 45Sandy 35Harry 15i.e. only distinct Name should display with only one value of Weight.I tried with 'group by' on Name column but it shows me all rows.Could anyone help me for above.Thanking in Advance.RegardsSanjeevJoin Bytes!
View 4 Replies View Relatedhelo..
I have 100,000 rows in the database and I want to read results for eg: from 5000 to 5050 by DataReader.
I wrote this code to do this but its too slow:
Dim SlctStr As String = "select * from topicstbl where partID like '" & PagePartID & "'"
Dim ReadCom As New SqlClient.SqlCommand
ReadCom.CommandText = SlctStr
ReadCom.Connection = MainLib.MyConnection
Dim MyReader As SqlClient.SqlDataReader = ReadCom.ExecuteReader()
Dim StartTNum As Long = 5000
For IR As Long = 0 To StartTNum - 1
MyReader.Read()
Next
Do While MyReader.Read
StartTNum += 1
If StartTNum > 5500 Then Exit Do
'''''''''''''''''''
Loop
MyReader.Close()
is there another way to do the same thing better off than this code?
Dear Friends,
Is there any way to display a table data separately like odd rows and even rows?I dont know this is possible or not?If it is possible means how can i achieve it?Please guide me a proper way.
Thanks all!
kiruthika
http://www.ictned.eu
Hi All,
I have the following Table
Type Name Value
x M1 5
x M2 10
x M3 20
y M1 10
y M2 15
y M3 30
Now, i need to add four more rows to the table
Type Name Value
x M1 5
x M2 10
x M3 20
y M1 10
y M2 15
y M3 35
z1 Total 15 (xM1+XM2)
z1 Diff 5 (xM3-xM1+XM2)
z2 Total 25 (yM1+yM2)
z2 Diff 10 (yM3-yM1+yM2)
Please help me.
Many Thanks,