Hi all,
I've tried 3 times to integrate RS in Sharepoint and I always have the same result. I can't see the new section in sharepoint central administration under application management. I didn't get any errors while installing any of the components.
RS and Sharepoint are on the same machine and I carefully followed the step to integrate RS in Sharepoint
Can someone help me on this?
thx
Fred
I get the following error when I try to navigate to a report/model/data source, stored in a Sharepoint Document Library using a Sharepoint URL based on an Extranet or Intranet zone - but it works OK using the url for the Default zone:
System.Web.Services.Protocols.SoapException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SecurityZoneNotSupportedException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used.
Is this a limitation of the SQLRS-WSS3 integration or is there a workaround?
Many thanks to anyone who can help!
Does anyone know the location of Microsoft.ReportingServices.SharePoint.UI.WebParts.dll after you install the web part? I am wondering if I can inherit from this web part to wrap some other functionality into it. I know that i see it in the GAC buyt can't seem to find it so I can look at the assembly using reflector.
Also, how easy is it to pass in parameters to the Report Viewer?
Thanks!
Erik
Since I wasn't getting any replies with answers or suggestions to my initial posting, I figured I would continue to list the problems and solutions I've encountered while trying to setup and utilize SharePoint integration mode, and read data from SharePoint with SSRS reports (developed in VS2005). Hopefully this is helpful to anyone that is also trying to learn all this stuff and figure it out.
(Single server - W2K3R2_SP2 as: DC / SQL2005 Standard / MOSS2007 Enterprise - see the bottom of this posting for the steps I took to set that up)
Note: After I get this to work, I intend to post my experiences for setting up SharePoint Integration with SQL and SP on separate boxes.
1. In the new reporting section under SharePoint application management in the Central Admin Console, the Grant database AND Set Server Defaults work when using the domain admin account, but not when using the SQLSPS service account I used to setup both SQL and SharePoint. Why can't I use the service account? Is the domain admin account now going to be used as a service account for accessing the sharepoint database?
This question remains unanswered as of yet.
2. Reporting Services configuration tool shows Sharepoint integration as red x when I create a new database in integration mode. (the service account SQLSPS and the Server object are members of the group WSS_WPG). If I switch back to native mode (the original reportserver database), the red x goes to a blue exclamation instead. Using Service Credentials or Windows credentials (as either the service account SQLSPS or as domain admin) doesn't change anything.
RESOLVED by using a domain user account for the ReportServer WebApp. Even though everything is installed on the same machine, it seems using the default of NETWORK SERVICE wasn't acceptable. Possibly because SharePoint is configured to allow additional machines in the farm?
3. http://servername:8080/reportserver will display Report Server information as it did before the integration on port 80, but http://servername/reportserver doesn't display anything through SharePoint.
Resolved. I needed to define a repository before I could view it (go figure). When I created a sharepoint site based on a report center template, created a data connection library and report library, and then referenced that by http://servername/sites/myReportCenterSite/myReportLibrary, I was able to see the equivalent of http://servername/reports (which is now disabled due to integration mode).
4. Unable to deploy to new report center sharepoint site I mention above using Visual Studio. I kept getting "A connection could not be made to the report server http://servername/sites/ReportCenter. Server was unable to process request. The request failed with HTTP status 503: Service unavailable (System.Web.Services). In Visual Studio, the project properties were: TargetDataSourceFolder = http://servername/sites/myReportCenterSite/myDataConnectionLibrary, TargetReportFolder = http://servername/sites/myReportCenterSite/myReportLibrary, TargetServerURL = http://servername/sites/myReportCenterSite/
Found these errors in the event logs on the server.
Event Type: Warning
Event Source: W3SVC
Event ID: 1021
Description:
The identity of application pool, 'ReportServer' is invalid. If it remains invalid when the first request for the application pool is processed, the application pool will be disabled. The data field contains the error number.
Event Type: Warning
Event Source: W3SVC
Event ID: 1057
Description:
The identity of application pool 'ReportServer' is invalid, so the World Wide Web Publishing Service can not create a worker process to serve the application pool. Therefore, the application pool has been disabled.
Event Type: Error
Event Source: W3SVC
Event ID: 1059
Description:
A failure was encountered while launching the process serving application pool 'ReportServer'. The application pool has been disabled.
RESOLVED the issue by changing the Application Pool used by reporting services from ReportServer to DefaultAppPool and changing the account DefaultAppPool used from NETWORK SERVICE to my service account SQLSPS. I have no idea why ReportServer is invalid, it was set to use the service account SQLSPS the same as DefaultAppPool is. Perhaps the reporting services add-on makes a change to invalidate this?
5. Attempting to read a SharePoint list using a SSRS report. This should be fun.
First, created a new custom list in the ReportCenter SharePoint sites I've been using and called it myCustomList. I added one item with a title of myCustomListItem1. I don't know if I need to do more than that for a simple test of reporting or not yet.
Second, configured new shared data source. Name = myCustomList1DataSource, type=XML, Connection String = http://servername/_vti_bin/lists.asmx (this URL is viewable in IE), Using Windows authenticaion.
Third, in VS2005 on a workstation in the domain, create new report item (report1.rdl). New dataset for report; Name=Report1DataSet, Data Source=myCustomList1DataSource (Shared), Command type = text, Query String = [See Queries and associated errors below]:
Initial query obtained from: Connecting SQL Reporting Services to a SharePoint List (David Wise)
http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx
Note: Queries when executing the dataset (which errors out) and when executing a query in CAML Viewer for the same information (which does work just fine) both initially return 401.1 and 401.2 errors (as viewed in Fiddler). Since the CAML query works, I have not tracked this down yet.
A. Original format from posting
<Query>
<Method Namespace=http://schemas.microsoft.com/sharepoint/soap/ Name="GetListItems"/>
<SoapAction>
http://schemas.microsoft.com/sharepoint/soap/GetListItems
</SoapAction>
</Query>
Parameter; Name => listName, Value => =myCustomList
Was NOT prompted to define the query parameters
- Gets this error: "An error occurred while setting the command text property of the data extension command. The XmlDP query is invalid. (Microsoft.ReportingServices.DataExtensions)."
- Advanced information from the error => 'http' is an unexpected token. The expected token is '"' or '''. Line 2, position 19. (System.Xml)
B. Changed: Placed the namespace URL in quotes (also tried with and without / in namespace after /soap)
<Query>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"/>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems
</SoapAction>
</Query>
Parameter; Name => listName, Value => =myCustomList (also tried Value => myCustomList) (no equal sign)
Clicked "!" to execute, and got prompted to define the query parameters
Entered Name => listName, Value => myCustomList
- Gets this error: "failed to execute web request for the specified URL (Microsoft.ReportingServices.DataExtensions)."
- Advanced information: <faultstring>Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sharepoint/soap/GetListItems/.</faultstring>
C. Try the query string that seems to work for Stramit CAML Viewer to read myCustomList
Stramit CAML query:
<Query xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<OrderBy>
<FieldRef Name="ID" />
</OrderBy>
</Query>
Also tried
<Query xmlns="http://schemas.microsoft.com/sharepoint/soap/">
</Query>
And tried entering no query...
Parameter; Name => listName, Value => =myCustomList (also tried Value => myCustomList) (no equal sign)
Clicked "!" to execute, and got prompted to define the query parameters
Entered Name => listName, Value => myCustomList
- Gets this error: "failed to execute web request for the specified URL (Microsoft.ReportingServices.DataExtensions)."
- Advanced information: <soap:Fault><soap:Code><soap:Value>soap:Receiver</soap:Value></soap:Code><soap:Reason><soap:Text xml:lang="en">Server was unable to process request. ---> Data at the root level is invalid. Line 1, position 1.</soap:Text></soap:Reason><soap: Detail /></soap:Fault>
RESOLVED. Went back to the query used in B above, and mysteriously it works now. This could be the "funny things happen" symptom I've been reading about. We'll see if it continues to function.
Here's what I've learned so far on Issue #5:
1. XML is confusing. XmlDP is even more confusing...whatever that is. Apparently it's new to/with Reporting Services in SharePoint integration mode?
2. There is far too little documentation regarding XmlDP and querying SharePoint lists from SQL Reporting Services.
3. According to http://msdn2.microsoft.com/en-us/library/ms159741.aspx: You must use the generic query designer to create the query. The query is not analyzed to identify parameters; therefore you must create parameters through the Parameter tab on the Dataset dialog box.
Tried this query:
<Query>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems" />
<Parameters>
<Parameter Name="listName">
<DefaultValue>myCustomReport2</DefaultValue>
</Parameter>
<OrderBy>
<FieldRef name="ows_Date" />
</OrderBy>
</Parameters>
</Query>
I was still prompted for the listName and the list returned with ows_Date still out of order. So maybe that proves this statement is true?
<translation: why make it convenient when it's already [somewhat] functional?>
4. When building the dataset, anything I place in the "Query string" box has to be enclosed in <query></query> tags or it errors out. I am trying to understand how to translate the CAML viewer query (which does work but isn't wrapped in query tags) into something that fits between query tags, and it hasn't gone well so far.
<translation: To be at one with your reports Grasshopper, you must understand xml>
5. According to http://srv1/sites/ReportCenter/_vti_bin/lists.asmx, "GetListItems" operation is supported
<translation: you're getting warmer...>
6. According to the soap output of my site http://srv1/sites/ReportCenter/_vti_bin/lists.asmx?op=GetListItems, I am only allowed to specify the following parameters: listName, viewName, query, viewFields, rowLimit, queryOptions and webID.
<translation: that and $3.00 will get you a cup of coffee>
7. According to http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx, only listName, viewName and rowLimit parameters are usable(?) (query and queryOptions may not be working properly with SSRS).
<translation: that kind of sucks>
8. When this started mysteriously working again, I tested using the "/" at the end of the namespace (wouldn't work without) and the "=" sign in front of the parameter value as defined on the parameter tab of the dataset (turns out to be optional).
As long as I can query SharePoint and get my list information back, I'm going to consider this issue closed and move on to actually using this information in a report. I'm sure that won't work right either, but why stop now?!
6. Ok, now that I can read SharePoint list data with SSRS, I need to try and actually do something with it.
A. Begin by setting up new data to report on
1. Create a new custom list (myCustomList2) and add a test record. This list will simulate the data we intend to submit to SharePoint using InfoPath, so it has a number of custom/created columns in it
2. Modify the working information from #5 above; add a new shared data source (myCustomList2DataSource), tell the dataset to use the new shared data source, change the information set in the parameter tab (Name => listName, Value => =myCustomList2) and test the dataset. Lucky me, it actually returned the record I entered on the first try.
B. Begin to build the report with the dataset returned
1. So, as I'm feeling good that it's actually reading the list in Step A without me threatening to destroy the machine, I look to the left in the Dataset results navigation pane in VS2005 and realize there are NO fields for me to choose to report on.
2. At this point, I have no clue what to do about getting this XML data into a report. Not that I have a large clue about SSRS otherwise, but I have at least been able to build SSRS reports when using a SQL database as the datasource. Fyi, http://msdn2.microsoft.com/en-us/library/ms159741.aspx states: "Reports can use data from XML documents and Web services, or embed XML in the query. There is no built-in support for retrieving XML documents from a SQL Server database.", in case anyone is trying to do that....
RESOLVED. Since the fields were not appearing automatically, I had started to add new fields to the dataset manually (if it doesn't work, beat it with a hammer, right?). I entered half a dozen or so fields, each one with the exact name as displayed in the query results, and then decided it would be fun to hit the refresh fields icon. As soon as I did that, all the fields shown in the query immediately appeared in the dataset and I was able to add them to a report. I don't know if I hit the refresh fields when working in issue #5, so I can't say if they are there now because of that, or because of adding some fields manually first, a combination of the two, or if it's just one of those mystery items I'm reading about with sharepoint reporting.
7. Rows are being returned even though they have NULL values (so far anyway), and most data is returning nicely for the bulk of the columns I created in the list I'm reporting on. Here are the current issues:
A. I have one column in my SharePoint list that is multi-lined text. If the text type is either rich text or enhanced rich text, the value returned in the query is formatted like this: "<div class=ExternalClassyadayada<div>My notes display here". If I set the column to be plain text, this doesn't happen. I will need to figure out how to filter that for my report.
RESOLVED. David Wise had some code listed at http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx that addressed this issue somewhat. I modified it to match my circumstances. Disclaimer: I'm not a programmer, so use this at your own risk.
function ExtractMultiLineText(myField as string) as string
dim strBegin as string
dim strEnd as string
dim myBegin as integer
dim myEnd as integer
dim myTextLength as integer
strBegin = "<div>"
strEnd = "</div>"
if myField = nothing then return ""
if myField = "" then return ""
myBegin = Instr(myField, strBegin) + Len(strBegin)
myEnd = Instr(myField, strEnd)
myTextLength = myEnd - myBegin
if myBegin < 1 then return myField
return mid(myField, myBegin, myTextLength)
end function
B. I have two columns in the SharePoint list that are set as number values with 0 decimal places. When I query those however in SSRS, they return with the number plus like 12 zeroes behind the decimal. Not a major issue, but I'll put it on the list anyway.
RESOLVED. Used the Int() function; =Int(Fields!ows_myProblemNumber)
C. If I go to "/_vti_bin/lists.asmx?op=GetListItems", it appears from the sample soap output that I am allowed to ask GetListItems for is: listName, viewName, query, viewFields, rowLimit, queryOptions and webID. As I mentioned in issue #5, according to http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx, only listName, viewName and rowLimit parameters are usable(?) and query and queryOptions may not be working properly with SSRS.
So, if I can't put anything other than this in my query string;
<Query>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"/>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
</Query>
and I only have a couple parameters to pass on top of that, then it appears to me that my options for filtering the amount of data returned from the SharePoint list is to figure out a way to do it with expressions in the parameters or in the report itself. Am I missing something? Is this really all I get to work with out-of-the-box?
More to come...
==================================
Installation steps taken to build the server VM:
==================================
(Using VirtualPC 2007)
1. Build OS (2003R2SP2) and promote to DC
1a. Create domain user service account SQLSPS
2. Prep for SQL
2a. Install ASP.NET, IIS (www) and .NET 2.0
3. Install SQL/SSRS 2005 Std
3a. Verify SSRS works
3b. RS config tool shows SP integration as blue exclamation
3c. Use service account SQLSPS for anything requiring Windows credentials
4. Install SQL2005 SP2
4a. Verify SSRS works
4b. RS config tool shows SP integration as blue exclamation
5. Prep for SharePoint
5a. Install .NET 3.0
6. Install MOSS2007 Enterprise and configure
6a. Webapps, SSP and anything else use svc acct SQLSPS
6b. Move Default website to port 8080 and re-activate (SharePoint stopped the site)
6c. Verify SSRS works on 8080
7. Install Reporting Services Add-in
8. Create new RS database in integration mode (with service credentials)
8a. RS config tool shows SP integration as red x
9. SP central admin /application management / manage integration settings
9a. reports server = http://srv1:8080/reportserver (since default port has been moved to 8080)
10. SP central admin /application management/grant database access
10a. using the FQDN, confirm servername and default instance - click OK
10b. Prompted for an account to use to retrieve information; svc acct SQLSPS did not work, domain admin did though
11. SP central admin / application management/set server defaults
11a. Accepted all defaults
12. Verify reportserver answers at http://srv1:8080/reportserver (via reportserver AppPool and DefaultAppPool)
13. Changed the application pool identity for the ReportServer AppPool from Network Service to the domain user service account I used for all SQL and SharePoint configurations (SQLSPS) and rebooted. The red x for sharepoint integration in the RS configuration tool is now a green checkmark.
I originally installed SQL Server 2005 and configured Reporting Services to run on a different port and website and all worked fine. I can access it via localhost:15540/reportserver and also use BI Development Studio to creat and publish reports.
I updated to SQL Server 2005 SP2, selected SQL Server integration on Reporting Services Configurator, created a new Report servcies database. Now when I go to localhost:15540/reportserver, the reports I had previously had available do not show... that may be ok?
However, I go to Sharepoint 3.0 Central Admin, no entry for Reporting Services show under App Management. Should it?
I also notice that link localhost:15540/reports no longer work... Where should I be able to go to get access to the same functionality.
I guess I am a little confused as to what the integrated mode should do for me. All I really wanted the capability to do was use the report viewer from inside sharepoint.
Thanks so much for any help
I have 2 servers a sharepoint frontend/sql server and a SSRS server. I have installed SQL2005 SP2 and am trying to configure the SSRS box for Sharepoint Inegration. I created the Database for the new sharepoint integration mode. But when I look at the configuration manager for SSRS I see that the Sharepoint Integration is not configured. I see this in the config manager "...Windows Sharepoint Services object model is not installed..."
I have done this before but I can figure out to install just the wss object model.
Any help would be great.
Erik
Hello,
i want to configure reporting services on wss 3.0. Everything works fine so far, but there are multiple webapplications in the sharepoint farm and my customer wants only a single sharepoint-webapplication to be configured for Reporting services. As far as i know the installation of Reporting Services addin changes all sharepoint-web.config-files on the server. Is there a way to specify the single webapplication to install RS addin with paramters? Am i missing a thing or is backing up and restoring the web.configs the only thing i can do?
Thanks for your answers
Martin
My topology is as follows:
Moss 2007 is installed on one server while sql2005-Sp2 is installed on a
seperate server. I installed the web front-end of sharepoint services 3.0 on
my report server. I also changed the port of my default website from 80 to
8080 so that they dont conflict.
I run the reporting service configuration app and created a new report
database that had sharepoint integration switched on. Furthermore I created a
new app pool in IIS that has a domain account instead of network service (as
described in the microsoft instructions) and used another domain account as the
windows service identity .
After that I installed the sharepoint add-in on the moss 2007 server. After
doing so the reporting configuration app showed a green light for sharepoint
integration. I went to application management and found the section for
reporting services.
Now... allthough Manage integration settings and Grant database access work
the third option "Set server defaults" produces the following error:
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.
When I try to access the report server through http: i.e.
http://bla:8080/reportserver I get :
Reporting Services Error
--------------------------------------------------------------------------------
Report Server has encountered a SharePoint error. (rsSharePointError) Get
Online Help
User cannot be found.
My trace log file complains about the following: (around 10 times the same message per try)
w3wp!security!1!4/17/2007-19:00:31:: i INFO: Exception while running with elevated privileges
w3wp!security!1!4/17/2007-19:00:31:: i INFO: The permissions granted to user 'NTSRVDOMAINAdministrator' are insufficient for performing this operation.
w3wp!library!1!4/17/2007-19:00:31:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'NTSRVDOMAINAdministrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'NTSRVDOMAINAdministrator' are insufficient for performing this operation.
w3wp!security!1!4/17/2007-19:00:31:: i INFO: Exception while running with elevated privileges
w3wp!security!1!4/17/2007-19:00:31:: i INFO: The permissions granted to user 'NTSRVDOMAINAdministrator' are insufficient for performing this operation.
w3wp!library!1!4/17/2007-19:00:31:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: User cannot be found.
Please help.. I've now spent 2 days on this and I am getting nowhere!!
Thanks!
I have setup Sharepoint Integration and built a report that connects to a SSAS cube to present data. The report was build in VS2005 before I installed SQL SP2 and the Sharepoint Add-in. I am able to upload the report (rdl) and the datasource (rds) , but when I try to view the report I get the following error.
The report server cannot process the report. The data source connection information has been deleted. (rsInvalidDataSourceReference).
The report and the datasource are in the same folder in a document library. When I try to deploy the reports using VS2005 I get a reporting services prompt when the deploy starts. Tried a couple of account to no avail.
One thing that I noticed is that the datasource icon is a blank page vs the icon I see in the IDE, but the report has the report icon in the document library.
Thanks for any help.
Hi Everyone,
Our project has two servers. One server is running WSS 3.0 and the SQL Reporting Services web front-end. We have a second server that operates all the databases involved (WSS Content, SRS, and our application specific DB).
We do not have a domain controller in our architecture. The WSS site is configured to use SQL authentication to connnect and modify the WSS Content database. We installed SRS, SRS service pack 2, and the Sharepoint add-in. We are using forms authentication for our WSS site. We would like to use SRS in Sharepoint Integration mode, but we are unable to create datasources, view reports, etc. SRS is configured to use the "Trusted Account" in WSS Central Admin.
When we attempt to create a new datasource, and we received an error stating the object moved and to check that SRS is in Sharepoint integration mode.
When we attempt to view a report, we get an error stating:
"An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode."
I have a feeling this has to do with the Windows Service Account and the Web Service Identity for SRS. What type of account should we use since we do not have a domain?
Thank you,
Michael milazzo
Hi -
I'm trying to get the MOSS + Reporting Services + SP2 all working together using Forms Authentication. The readme file that was shipped with the SQL SP2 CTP seems to suggest that this is a supported configuration.
I've got everything setup and configured - I've tested in using Windows Integrated mode for my MOSS front end and my report renders absolutely fine. When I try to switch the Authentication Provider to Forms Authentication mode, when I click the report, I'm now getting an error message that states: "The item 'http://moss:8003/Reports/Company%20Sales.rdl' cannot be found. (rsItemNotFound)".
This message is being given to me from the following URL:
http://moss:8003/_layouts/ReportServer/RSViewerPage.aspx?RelativeReportUrl=/Reports/Company%20Sales.rdl&Source=http%3A%2F%2Fmoss%3A8003%2FPages%2FReports%2Easpx&DefaultItemOpen=0
What is the ReportViewerWebPart doing to gain access to the RDL file in my document library? Is it trying to access it through a web service? Do I need to do something so that it can maintain the Forms Authentication cookie provided to the end user that clicked the report?
Thanks
-SE
Can I have the same set of ReportServer & ReportServerTemp databases to be used for 2 different instances as such.
1. SharePoint integration mode instance 1
2. Native Mode instance 2
Hi,
I am trying to integrate SQL SERVER 2005 ( Version 9.00.3033.00) with sharepoint server using the Add-in. In Add Application Management -- > Reporting Services Trusted Accounts, When i provide the credentials it is giving a message
Some or all identity references could not be translated.
I have installed the latest SQL SERVER 2005 from http://www.microsoft.com/downloads/details.aspx?FamilyID=4E50BE6E-3F92-4552-A78C-B3BE1D94D5DA&displaylang=en
Am i missing something ?
Thanks & Regards
Kiran Kumar
I see on the download page that the SharePoint Integration component only runs on x86. Are then any plans or timetable to release an x64 version? We run both the x64 version of SharePoint 2007 and SQL 2005.
This is the second SQL Server component (the first being the IIS Merge Replication agent) that has been released only for x86. What gives?
After upgrading to SP2 straight from from SP1, I get the message that my current reporting server instance cannot be configured for Sharepoint Integration when I click on the Sharepoint integration tab. Also, I do not get the option of choosing Sharepoint integration if I try to create a new database in the Database Setup tab. I've read that the new Reporting Services Configuration Manager is not compatible with an older instance of Reporting Services, and realize that might be the problem. But I haven't found how to get around it! Do I need to uninstall SSRS and start over? I'd really like to switch to Sharepoint integration, if at all possible.
Another funny thing: I thought I might try re-installing SP2 to rectify the above problem, and it sees that SSRS is the only thing that needs upgrading. When you continue, it says SSRS was successfully updated, but nothing's changed. If you re-run SP2, SSRS is chosen to be upgraded again! I've installed SP2 3 times now, and each time it says SSRS is needing upgrading.
Has anyone else seen this problem?
Thanks,
Matt
Hello all,
I configured Reporting Services in SharePoint Integrated Mode at a client and am running into an issue as described in this article: http://support.microsoft.com/default.aspx/kb/942530. I got the Cumulative Patch 4 (and 5) for SQL Server 2005 SP2 from Microsoft and applied it to the Reporting Services box. However, I€™m still seeing the same issue. Has anyone else run into this issue and resolved it?
Thanks.
Deepak.
I'm setting the Hidden property to True and then creating the report using the CreateReport method from the ReportingService2006 class. When I check the reportserver database Hidden is set to true. But when I call the GetProperties method it shows Hidden as being false. And in the document library the reports are visable.
I tried calling the SetProperties method after I created the report but it still didn't work.
Here's how I create the report.
Dim props(0) As ReportServer.Property
Dim SetProp As New ReportServer.Property
SetProp.Name = "Hidden"
SetProp.Value = "True"
props(0) = SetProp
rs.CreateReport(Path.GetFileName(fileName), Folder, True, bytes, props, warnings)
Any idea?
Thanks,
-Somsong
Is there any way we can download sharepoint folders using ssis. I have a specific link(View on sharepoint) which I would like to download using ssis, Is it possible?
View 2 Replies View RelatedWhen integrating SQL Reporting Services 2005 with Sharepoint Services 3.0, and you have a SRS report that runs over a view with the UserID as a parameter (to filter the records the user has access to), will the SharePoint ReportViewer passover the UserID to RS and RS to SQL?
Sharepoint security with Reporting Services stops at Item level or does it impersontate down to SQL? Should authenticating be Integrated or SQL ? Should the userid in SQL be exact match with Sharepoint? Or are they mapped somewhere?
Thank You!!
I am trying to do some integration between reporting services and sharepoint. I have some instructions that tell me to click on "Site Collection Features" under site settings. I go ahead and click site settings and find no "Site Collection features" link. How do I get this link to appear?
View 1 Replies View RelatedHello,
I'm trying to set up SharePoint Integration for our report server. The setup we have is: 1. SQL server hosting the SharePoint databases and the Reporting Server, 2. SharePoint web front end hosting all SharePoint services. I've installed the reporting services SP2 on the SQL server and the reporting services add-in on the SharePoint server.
I configured the report server following the directions here: http://download.microsoft.com/download/f/d/c/fdcb3a53-0cb1-4e67-a1b6-45b89b3c59cf/readme_rsaddin.htm and here: http://www.sharepointblogs.com/helloitsliam/archive/2007/02/21/19801.aspx
Everything seems to be set up correctly, but when I open the Reporting Services Configuration Manager, the SharePoint Integration option shows the error, "The report server cannot access setting in the SharePoint configuration database. Most likely, the Windows SharePoint Services object model...."
I do have WSS 3.0 installed on the report server.
When I look in the logs on the report server it says the login failed for the account I have set as the Windows Service Identity however, when I look at the logs on the SharePoint server it shows that it is granting the account read and write access to each of the SPWebApplications I have set up.
Any suggestions?
Thanks,
Cynthia
I have the integration set up between Sharepoint and SSRS, but I follow the Add-in readme below. I do not see the Reporting Services select content types section. I can manually create each content type(Report, Builder, Datasource, etc..) but the images for then when I click Add in the list there are no images associated to the different content types.
Set Permissions and Add Reporting Services Content Types
You must assign user and group accounts to SharePoint groups or permission levels to grant site access to those users. Users who can access a site can also perform reporting tasks. For example, users with view permissions to access a site can also view reports on that site.
To complete the integration steps, you must ensure that all users who access and manage report server content on a SharePoint Web application have the appropriate permissions. You might also want to add Reporting Services content types so that users who have permission to use Report Builder can start it from the New menu. To add content types:
Open the library for which you want to add Reporting Services content types.
On the Settings menu, click Document Library Settings.
Under Content Types, click Add from existing site content types. If Content Types is not available, locate the General Settings section and click Advanced settings to allow content type management.
In the Content Types section, select Yes to allow multiple content types.
In the Select Content Types section, in Select Site content types from list, click the arrow to select Reporting Services.
In the Available Site Content Types list, click Report Builder Report, and then click Add to move the selected content type to the Content types to add list.
To add Report Model and Report Data Source content types, repeat steps 5 and 6.
When you finish selecting all the content types that you want to add, click OK.
I have setup the Sharepoint 2007 Reporting Services add-in and am running into an issue. I was able to get a report to show up in a report viewer webpart once, but after that, I receive a message similiar to the following (for all reports);
'Execution 'ex2ubmetmr13vdffxciursfg' cannot be found '
Any help would be appreicated. I'm including my log file for the error as well as it should be helpful.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>Mountain Daylight Time</TimeZone>
<Path>c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServer__08_06_2007_12_33_12.log</Path>
<SystemName>DEV-AD-V2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!webserver!6!8/6/2007-12:33:14:: i INFO: Reporting Web Server started
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Evaluation copy: 0 days left
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!6!08/06/2007-12:33:18:: Call to GetItemTypeAction(/).
w3wp!library!6!08/06/2007-12:33:18:: i INFO: Catalog SQL Server Edition = Enterprise
w3wp!library!6!08/06/2007-12:33:20:: Call to ListParentsAction(/).
w3wp!library!6!08/06/2007-12:33:20:: Call to ListChildrenAction(/, False).
w3wp!library!6!08/06/2007-12:33:22:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:22:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:22:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:29:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:29:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:29:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!webserver!6!08/06/2007-12:33:29:: i INFO: Processed folder '/'
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!9!08/06/2007-12:37:34:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!9!08/06/2007-12:39:28:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!9!08/06/2007-12:40:18:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!9!08/06/2007-12:40:26:: i INFO: Call to RenderFirst( 'http://DEV-ad-v2/Test Reports/Report1.rdl' )
w3wp!library!9!08/06/2007-12:40:29:: Using folder c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesRSTempFiles for temporary files.
w3wp!webserver!9!08/06/2007-12:40:30:: i INFO: Processed report. Report='http://DEV-ad-v2/Test Reports/Report1.rdl', Stream=''
w3wp!library!9!8/6/2007-12:43:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!8/6/2007-12:53:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:06:: Call to CreateFolderAction(Reports, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:08:: Call to CreateFolderAction(Report%20Project3, http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:09:: Call to CreateFolderAction(Data%20Sources, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:10:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources/EDR.rsds).
w3wp!library!6!08/06/2007-12:59:10:: Call to CreateDataSourceAction(EDR.rsds, http://DEV-ad-v2/Shared Documents/Data Sources, True).
w3wp!library!6!08/06/2007-12:59:15:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-12:59:15:: Call to CreateReportAction(Report1.rdl, http://DEV-ad-v2/Shared Documents/Reports/Report Project3, True).
w3wp!library!6!08/06/2007-12:59:18:: Call to SetItemDataSourcesAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to ListParentsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:49:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:02:50:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:02:50:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!session!6!08/06/2007-13:02:56:: i INFO: LoadSnapshot: Item with session: kabqahahtxbdrgqfqza3zf45, reportPath: http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:02:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
w3wp!webserver!6!08/06/2007-13:02:56:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:06:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:06:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:07:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:03:10:: i INFO: LoadSnapshot: Item with session: dpeedqvwmpr3z155qsu54m55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:10:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:10:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:17:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!6!8/6/2007-13:03:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!session!6!08/06/2007-13:03:21:: i INFO: LoadSnapshot: Item with session: gn34sn55qxkdwi55k2fm4y55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:21:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:54:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!6!08/06/2007-13:03:55:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:04:12:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:04:23:: i INFO: LoadSnapshot: Item with session: s5oz5evzesse5cugbxxu1wy3, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:04:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
w3wp!webserver!6!08/06/2007-13:04:23:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:09:54:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:09:57:: i INFO: LoadSnapshot: Item with session: ex2ubmetmr13vdffxciursfg, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:09:57:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
w3wp!webserver!6!08/06/2007-13:09:57:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!8/6/2007-13:13:17:: i INFO: Cleaned 0 batch records, 0 policies, 2 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
Thank you,
John
I already tried SharePoint List Source and found some bugs in it. Ex. Duplication of records, sometimes its throw an error: A possible reason might be you are trying to retrieve too many items at a time (Batch size).
I also used SharePoint WebServices and store the records into XML file and used those files as a source to load the data into Sql Server Table.Â
Is there any other approach to pull the data from SharePoint List?
Hi
I had the following setup:
Farm Server 1
* Sharepoint 2007 full install
Farm Server 2
* SQL Server 2005
I installed the following:
* SP2 for SQL Server 2005 on Server 2
* Web-front end install of Sharepoint 2007 on Server 2 - to install the object model
* SSRS2005 reporting services add-in for Sharepoint technologies on Server 2
Since doing that, I can no longer get to central administration on Server 1 - I now get the following error when navigating to central admin:
Server Error in '/' Application.
Runtime Error Description:
An application error occurred on the server. The current custom error
settings for this application prevent the details of the application error from
being viewed remotely (for security reasons). It could, however, be viewed by
browsers running on the local server machine.
Which web.config do I have to edit to get the full error to show, and has anyone else experienced this?
This happened to me when my servers were fully configured and had data - so I rebuilt them from scratch and the same problem occured again!
Adam
Hi there,
I am implementing SSRS 2005 Sharepoint integration mode in a stand alone server and we are having problems with basic authentication.
When the MOSS web application and the Report Server application is in Windows Integrated authentication Everything works fine and we can upload and view reports in the sharepoint site.
But when we switch the MOSS web application into basic authentication and RS stays the same with windows integrated authentication the reports in sharepoint throw 401 unauthorized errors. It looks like the error occurs when accessing the _vti_bin/ReportServer/ReportService2006.asmx web service??
Anyone have any fix on this????
Does SSRS 2005 Sharepoint integration mode support Basic authentication???
Hi,
I'm having problems setting up Reporting Services in SharePoint Integration mode. The development environment works fine, but I can't get it to work in production.
Problem seems to be in the authentication between SharePoint and Reporting Services. When I go to "Set Server Defaults" in the SharePoint central administration I get the following message:
Code Snippet
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2006.ReportingService2006.ListSecureMethods()
at Microsoft.ReportingServices.SharePoint.Soap.ReportService2006.ListSecureMethods()
--- End of inner exception stack trace ---
I get the same message when trying to deploy a report from Visual Studio to a SharePoint lib.
Some info:
- SP apppool is running under domain account a
- SSRS apppool is running under domain account b
- SP uses NTLM authentication
- SP and SSRS are running on different servers
- SSRS Configuration shows all green checkmarks
Things I tried:
- Basic authentication instead of Windows Integrated on SSRS
- NTLM only instead of Negotiate on SSRS
- Settings SPN's for SSRS, didn't help
- Checked NTFS rights on ReportingServer dir, were fine (Domain users have read/list)
Does anyone have an idea about how to solve this? Any help is appreciated.
Hi,
I get the following error when I am trying to deploy Report from Visual Studio Report Designer.
SRSS is configured in SharePoint integration mode. Configuration is mentioned below.
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://rbddspsdev2:44887/.
------------------------------
ADDITIONAL INFORMATION:
Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized. (System.Web.Services)
------------------------------
BUTTONS:
OK
Configuration is as follows.
Web front end server.
MOSS 2007 Standard edition 64 bit.
SQL Reporting Service Add in 64 bit.
SQL Server
MS SQL server 2005 32 bit with sp2.
Reporting Services configured.
WSS 3.0 32 bit required for configuration, of SRSS in integrated mode.
Windows service and web service are both running under a domain account. The account is a SharePoint Admininstrator. The account is also in Administrators, Reporting Server user and Web service group and also has a dbo rights on database.
We'll be using 2014 enterprise to stage some excel files into sql. Can ssis read excel files from a sharepoint server?Â
View 4 Replies View RelatedThere is a requirement to insert if there is a new record/update the existing record to Sharepoint. Am able to do Insert/Update to SharePoint if the data quantity is minimum, i.e, records in hundreds.
link: [URL] ....
if the records/data is more(in thousands), while updating to sharepoint, am getting below error. I tried to keep the minimal batch size, but still getting the same error.Is there any setting on Sharepoint that can be set to increase updation capability?
Error details:
 System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method
is implemented properly. The first 1024 bytes of the response were: '
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
[code].....
what is the cause of this error?
Hi,
I am working on sharepoint 2007 integration with reporting service 2005. There are few facts which i am trying to understand and need some clarifications. Please provide your comments
1) While configuring "Database setup" in Repoting Service Configuring Manager" i found two modes 1) Native and 2) SharePoint Integration. When creating a report server database if we check "Create the report server database in Sharepoint Integration Mode" then it set the mode to "SharePoint Integration Mode". There is no option of switching the same database to native mode. So i have to create another database in "Native Mode". (IS THIS CORRECT. DO WE NEED TO CREATE TWO REPORT SERVER DATABASE SEPERATE FOR SHAREPOINT INTEGRATION AND NATIVE)
2) I am using the new report viewer web part in sharepoint 2007. When i am in sharepoint integration mode i can create datasource, report model and with report builder i can create rdl file. On selecing any RDL file in doument library and it gets displayed in Report Viewer Web Part. When i switch to Native mode i want to configure the web part to use the report created with SQL Server Bussiness Intelligence Dev Studio and deployed on http://localhost:808/ReportServer. (IS THERE ANY WAY SO THAT I CAN EXPORT AND IMPORT ALL .RDL FILE FROM http://localhost:808/ReportServer to http://localhost/ReportServer)
I AM NOT ABLE TO CONFIGURE WEB PART WHEN I AM IN NATIVE MODE i.e giving path of .RDL in report textbox throw a error saying "Item not found" i tried all combination. THIS can be related to datasource not reading in .RDL file in native mode while confuring report viewer web part.
http://localhost:808/ReportServer (Report Server)
http://localhost/ReportServer (SharePoint Mode) (Default Top Level Site)
3) LAST : I want to create a .RDL file report from the data in sharepoint, say lists or news etc. So when creating a RDL file how can i connect to sharepoint database. I read some where that in previous release they used to DATA EXTENSIONS and get the data from list in sharepoint with something like http://<servername>/<sitename>/List=Announcement when creating RDL file. Is the alternative in new release to create the report based on sharpoint list data.
Thanks and i would really appreciate your help
I need to install SSIS/SSRS in SSMS. I have connected the SharePoint list view to excel for reporting purpose but due to data size the performances is very slow in excel and now I would like to connect the SharePoint List to SSIS/SSRS
I have windows 8, 64 bit system
I have installed SQL Server Management studio 2012 but I am unable to enable the Integration and Reporting Services
May be I have missed to choose the option during installation.
I am trying to load data from sharepoint to Database. WhenI try to execute the package, am getting below error.
[SHAREPOINT_SRC_SLTS_FIELDS [286]] Error: Microsoft.Samples.SqlServer.SSIS.SharePointUtility.SharePointUnhandledException: Unspecified SharePoint Error. A possible reason might be you are trying to retrieve too many items at a time (Batch size) ---> System.ServiceModel.FaultException: Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.