One of my database (name XYZ) shows suspect status in EM but when i try to dig further by running below query i get only "OK" ( see query)
SELECT [name],status, case status when (status & 32) then 'Loading'
when (status & 32) then 'Loading'
when (status & 64) then 'Pre Recovery'
when (status & 128) then 'Recovering'
when (status & 256) then 'Not recoverd'
when (status & 512) then ' Offline'
when (status & 1024) then ' Single user'
when (status & 1024) then ' Read only'
when (status & 32768) then ' Emergency Mode' else 'OK' end as status
FROM master.dbo.sysdatabases
WHERE [name] NOT IN ('distribution', 'tempdb', 'model','Pubs','Northwind')
also i run this
select * from sysdatabases where databaseproperty(name,N'IsSuspect') <> 1
and here also i get all the database including "XYZ"...i guess if "XYZ" is suspect the resultset should not be including "XYZ"
Why if the EM shows suspect status FOR "XYZ" DATABASE it should come up when i check status column in sysdatabases table?
Hi I want to suspect database stop server first I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav and then start the server use command to check: SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status do you know how to set database suspect with this way, or do you know other way to suspect databse. absolutely,I could re-back my server noraml with your way Thanks
Hi! I am having a problem with one of my local data bases, it shown the status of (suspect). When I try to apply solutions that I found on internet for example run: sp_resetstatus 'dbImpOfertas'
it shows the message that : The databse 'dbImpOfertas' does not exist. Use sp_help to show available databases.
This is the log information:
2007-11-28 00:00:03.68 spid53 Starting up database 'bdImpOfertas'. 2007-11-28 00:00:03.76 spid53 Error: 602, Severity: 21, State: 50 2007-11-28 00:00:03.76 spid53 Could not find row in sysindexes for database ID 15, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.. 2007-11-28 00:00:05.21 spid53 Using 'xpstar.dll' version '2000.80.2039' to execute extended stored procedure 'xp_instance_regread'. 2007-11-28 00:00:05.21 spid54 Using 'xpstar.dll' version '2000.80.2039' to execute extended stored procedure 'xp_instance_regread'.
(From an exchange originally posted on SQLServer.com, which wasn't resolved...)
To return views tailored to the user, I have a simple users table that holds user IDs, view names, parameter names, and parameter values that are fetched based on SUSER_SNAME(). The UDF is called MyParam, and takes as string arguments, the name of the view in use, and a parameter name. (The view the user sees is really a call to a corresponding table returning UDF, which accepts some parameters corresponding to the user.)
But the performance is very dependent on the nature of the function call. Here are two samples and the numbers reported by (my first use of) the performance monitor: Call to table returning UDF, using local variables:
declare @orgauth varchar(50) set @orgauth = dbo.MyParam('DeptAwards', 'OrgAuth') declare @since datetime set @since = DATEADD(DAY,-1 * dbo.MyParam('DeptAwards', 'DaysAgo'),CURRENT_TIMESTAMP) select * from deptAwardsfn(@orgauth,@since)
[187 CPU, 16103 Reads, 187 Duration]
Call to same table returning UDF, using scalar UDFs in parameters:
SELECT * from deptAwardsFn ( dbo.MyParam('DeptAwards', 'OrgAuth') ,DATEADD(DAY,-1 * dbo.MyParam('DeptAwards', 'DaysAgo'),CURRENT_TIMESTAMP) ) [20625 CPU, 1709010 Reads, 20632 Duration] (My BOL documentation claims the CPU is in milliseconds and the Duration is in microseconds -- which I question.) Regardless of the unit of measure, it takes a whole bunch longer in the second case.
My only guess is that T-SQL is deciding that the parameter values (returned by dbo.MyParam) are nondeterministic, and continually reevaluates them somehow or other. (What ever happened to call by value?)
Can anyone shed some light on this strange (to me) behavior?
----- (and later, from me)--- (I have since discovered that the reference to CURRENT_TIMESTAMP in the function argument is the cause, but I suspect that is an error -- it should only capture the value of CURRENT_TIMESTAMP once, when making the function call IMHO.)
Hi all, What does this mean? SUSPECT, in SQL server 7? I dont remember what caused one of my database to be SUSPECTed. Can someone let me informed what causes a database to be SUSPECT and what are its implications and how to make the SUSPECTed database work
I had a database (give it a name A) that was marked suspect. I ran the following query
use master go sp_resetstatus <db_name>
I then stopped and restarted SQL Server. This fixed the problem for database A but I got two more that were suspect. After running the same query for both B & C, C got fixed but I still cannot fix B. My question is why did fixing problem A cause a problem for DB B & C?
I tried running the following query on B after the first one failed.
Update sysdatabases set status = -32768 where name='B'
This gave me the following error: Ad hoc updates to system catalogs are not enabled. The system administrator must reconfigure SQL Server to allow this.
Hi all, I have had problems lately with my standby server,when i am trying to do a load from my production it goes into suspect mode .the load is just fine as per my error log after 5/10 minutes it goes into suspect mode the error is "Error 3305,Severity 21,State 1" "Page 559396 in databse "xyz' read in during runtime or load xact was uninitilised" "Idxact:Dbid:6 is in IN_LOAD state with the following exception raised:major 43,minor 3,pstat:0X400"
Now i have checkd error 3305 everywhere but no answers..please help
I have a db in suspect. I want to try to run sp_reset_status and reset the status bit. I believe there is a script that I can run to create sp_reset_status. Where can I find that?
Every once in a while one the DB on SQL Server 2000 goes suspect. I was thinking it was because there was no back up plan. The problem is usually resolved after a simple start and stop of the SQL Server Agents. Anyone have similar situations that could shed some light?
My database is marked as suspectI am using SQL Server 2000,I ran the command sp_resetstatus it executes succesfully. but still the database is in suspect state.can any one tell me how i recover my data.thanks in advance
Im running SQL 7.0 with a large heavily used 4Gb database. After a while the database is marked suspect. What can be the cause to this ? Please email me and I can send you additional information about hardware and the system.
I tried "sp_resetstatus" procedure. But it says, the following mesg, " Prior to updating sysdatabases entry for database 'DELPHI3', mode = 0 and status = 1077936141 (status suspect_bit = 0). No row in sysdatabases was updated because mode and status are already correctly reset. No error and no changes made. ".
Can anybody please help me how to make this into normal status.
I really need help on this, one of my databases is marked suspect. I did tried to execute this command below (scripts):
use master go sp_configure 'allow updates',1 go reconfigure with override go update sysdatabases set status=4 where name='security' go sp_configure 'allow updates',0 go reconfigure with override go
and it release the suspect from the 'Security' database, but it Won't let me access the table,data or nothing. The worse thing is when I stop & start the server again, the database marked suspect again.
Could anybody out the help me on this. Thank in advance, Vu
Today we found a suspect database and after consulting this website went and ran sp_resetstatus on one database with success. After which we stopped and started the server and ran dbcc newalloc, dbcc textall, dbcc checkdb on that database. It successfully changed from its suspect status and random queries showed that the data was still intact.
Exactly the same process was run on another database and it failed to move from the suspect status after restarting the server. We then went through books online, which advised to update sysdatabases setting the database's status to 0. This also failed.
HELP PLEASE.
Does anyone know what else to try? This was a development database with no backups. This would save a weeks work. Thanks for you time.
steps to recovery suspect database Log showed a 614 error and probably is a result of a hardware 0/s problem or ?. The database was not reloaded before the error. I was recently was called in to help some people who had a SQL Server database marked as suspect. I have never had to deal with this situation before. I got the database operational by doing the following steps. Was there an easier or better way?
Executed statement per BOL procedure to allow updates to system tables.
Removed suspect flag per BOL (BOL says to use sp_resetstatus which I did not find in master or msdb, however the BOL had the code listed so I typed in the pertinent statement). I do not know what the '^ 256 meant in BOL, I used the status code that the nonsuspect databases had '16400'.
SQL Server would not let me restore into a suspect database so I reset the suspect flag. Could have dropped the database, however I did not have the information to recreate the database so the restore function would work.
Put database in single user mode.
restored database.
Removed the ability to update system tables per BOL
I am using SQL server 6.5 sp3 and NT 4.0 sp4. My SMS database has been marked suspect. I do not have a backup. I have read several articles about trying to us sp_resetstatus. I can not find this sp on my server. When I try the following: UPDATE master..sysdatabases status=256 WHERE name = ('sms')
I get the following back: Ad-hoc updates to system catalog not enabled. System Adminstrator must recongifure system to allow this.
I have searched Microsoft KB and everywhere I can think of. If anyone can help I would really appreciate it. I even tried reapplying sp3 and rebooting...this did not help either. Can someone please tell me how to change the status back to normal.....I think this is a it will take..
I have the original dat files ( 2 seperate log / data) of a database. I have created new devices (same size as originals) and a new database. I replace the new dat files with the originals and the database always comes up as a suspect. I have done this with the other 7 databases on my server and none have similar problems. This database was created different then others using new database and new devices routine rather than creating the devices first. Any Ideas?
Hi... I have this problem with my database (dunno how this thing happen). Today, 2 of my databases have been marked as 'suspect' (grey color in SQL Enterprise Manager). In ISQL, when I try 2 connect 2 the database (use), the message ' Msg 926, Level 14, State 1 Database 'MYUAT' cannot be opened - it has been marked SUSPECT by recovery. The SA can drop the database with DBCC.' appeared.
I'm running Win2000/SQL2000 on a Compaq CL380 Cluster Server. After a powerdown to do a physical move, the MSDB is now marked SUSPECT. I have tried the stored procedure SP_RESETSTATUS, a DBCC consistency check, and also have restored the database from backup. The database still shows MSDB is suspect. What can I do? We can't get a good backup as long as it is still this way as it depends on the SQL Agent.
We recently had some kind of error on one of the server's hard drives. The network guys, reinintialized (or something) and were able to bring everything back. However, two of my databases now is "Suspect" and can't be used. Both the MDF & LDF exist, and there are no indications of actual data loss. What can I do with a "suspect" database ? SQL 2K
What should I do to recover these two databases? Thank you for all your suggestions.
I could not open my database.It says its Suspect and could not open and not displaying any of the objects What should be the reason and what is steps i can do make it up and running.
One of my prodn databases went into suspect mode today.. I was able to recover it. The tech support guyz had rebooted the server couple of times (out of ignorance) cos they thought if wud fix it. I lost the sql errpor log file which had the error details as to why db when into suspect....so my questions are..
1. Probable reasons why db when into suspect mode. 2. Any other way to find out about the error details. 3. When I ran dbcc checkdb with repair_rebuild option for some tables it gave error
"Parent node for page (1:13075) was not encountered"
How can i resolve the consistency errors. Is DBCC CHECKTABLE sufficient.???
We have an SQL Server 2000 DB server with several databases on it. Frequently, one of the DBs will have a state of "Suspect." This appears to occur after our 3rd party backup software runs a full backup on the weekends.
How can I begin to troubleshoot the cause of this issue? Has anyone seen anything like this?
Hi everyone, I hope you could help me. I have a database that was marked as suspect, i change is state but now i want to extract the information of the database and a couldn't because de database have several erros include 2 allocation erros. How could i solve this problem? I don't have a recent database backup. thanks to everyone.
Hi all, I have a suspect database caused by a disk error on a Raid5 disk. I'm a bit of a novice on SQL and am using SQL 2005. I have tried the following and can't get the database status to reset which means the DBCC checkdb command does not run. The client I am fixing this for has no backup of the data at all.
USE master GO sp_configure 'allow updates', 1 GO RECONFIGURE WITH OVERRIDE GO
EXEC sp_resetstatus 'nhd2007'; GO
sp_configure 'allow updates', 0 GO RECONFIGURE WITH OVERRIDE GO
DBCC checkdb ('nhd2007',NOINDEX); GO
I get the following error back:- Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install. The suspect flag on the database "nhd2007" is already reset. Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install. Msg 926, Level 14, State 1, Line 3 Database 'nhd2007' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
The error in the SQL Log which is causing all the problems is:- Message SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:3425329; actual 25600:1744858624). It occurred during a read of page (1:3425329) in database ID 24 at offset 0x00000688862000 in file 'E:hd2007hd2007.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Any advice on what I can do to get some access to the data would be great.
Okay, so i have a tabase named "TEST" that i set up, everything in it is for a website i've been designing slowly for the last month, i come in today, and notice the database is marked suspect. look at the log and i see all of this:
Recovery of database 'Test' (7) is 20% complete (approximately 305 more seconds) (Phase 2 of 3).
ForwardLogBlockReadAheadAsync: Operating system error 23(Data error (cyclic redundancy check).) encountered.
Operating system error 23(Data error (cyclic redundancy check).) on device 'C:Program FilesMicrosoft SQL ServerMSSQLdataTest_Log.LDF' during ForwardLogBlockReadAheadAsync.
Error: 3313, Severity: 21, State: 2
Error while redoing logged operation in database 'Test'. Error at log record ID (8440:42526:1)..
Error: 3414, Severity: 21, State: 1
Database 'Test' (database ID 7) could not recover. Contact Technical Support..
Now, honestly, i could care less about the data, the thing the matters most to me, is the couple of stored procedures i've developed.
Hi all , i am facing a problem and don't know how to handle the issue. I created a database in sql server 2000 , gave it to a friend who made certain changes to the database and mailed me back. Now that i try to open the database , in the enterprise manager the icon of the my database is gray with "suspected" written in brackets after the database name. On expandin it , it shows ("No Items"). Kindly help me out guys , i am totally stuck for the moment. Regards
i have a database which has a log file size of 10 Mb. it goes into single user mode automatically . i tried to increase the size of file size of log file from 10 mb to 50 mb... but i want to make it only 20 mb ... i am unable to change since it gives a message .cannot decrease the size of the file .. is there another way to decrease the size of log file .....also the database goes into suspect stage automatically sometimes
