Show Date Parameter In A Text Box
Aug 29, 2007
I have a report that pulls data for the following date parameters:
DECLARE @STARTDATE datetime, @ENDDATE datetime
SET @STARTDATE = GETDATE()-3
SET @ENDDATE = GETDATE()
Select * from tablename where reportdate between @STARTDATE and @ENDDATE
This query works fine. I wanted to show the parameters chosen in a text box in the report so the user knows the date range the report was run. I tried using the following:
"Discharge Date between " & Parameters!STARTDATE.Value & " and " & Parameters!ENDDATE.Value
but I am getting a forward dependancy error. I have also tried setting a default value but can not get the correct code to subtract three days from Now()
Can someone help me with this one?
View 5 Replies
ADVERTISEMENT
Jan 4, 2007
I have a report that runs transcripts for people. I have a date parameter setup along with last and first name. The date parameter field is used to specify what year (ex. 1/1/2006 - 12/31/2006) to pull the information for.
Now..I have a text box at the bottom (Footer) of my report that says something to the affect of "Official transcripts for 2006". There will be times when I have to run the report using a different year other then "2006" in the date parameter field. How do I have the text at the bottom change to reflect the year I'm reporting on? If I use dates say in 2004 I need the text at the bottom to reflect that year and not 2006. Can this be accomplished?
Thx,
Bill
View 2 Replies
View Related
Mar 26, 2008
Hi,
I'm attempting to use the following code to display either 'All' or the date value selected by the user from a Report parameter;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "From Date: " + Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10))
This is throwing an error ('#Error').
I can use the following code with no error, though its not as useful;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "Not all")
I can even use this to display the selected value (i.e. 2007-01-01);
Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10)
Why can't I use them both in my iif statement?
Can someone please help?
View 2 Replies
View Related
Jul 6, 2015
A date field in a report returns the date value as:
2015-07-01 13:30:27.000
Is there any way I can script this to appear as:
01 July 2015 (or 01-07-2015 or 01/07/2015) - basically to cut out the hours, minutes and seconds?
The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:
01 July 2015 13:30
View 9 Replies
View Related
Oct 19, 2007
While converting Crystal reports to Reporting services I noticed that the existing crystal reports puts todays date as default value for the date parameter. Users also want it that way. I was unable to find a way to put a default value for a parameter in SSRS. I am a newbie in this so may be I missed something.
View 1 Replies
View Related
Jan 1, 2008
Hi:I have written a SQL statement that accepts a letter and then prints out all the records in a table starting with that letter. I was wondering if there is a way that I could change the query so that if prints out all records if a blank or empty value is passed in?Here's my query: ALTER PROCEDURE [dbo].[GetMediaListByFirstLetter] ( @firstLetter char(1))AS SELECT Media_ID, OrgName FROM Media WHERE UPPER(SUBSTRING(Media.OrgName,1,1)) = @firstLetterAny help doing this would be greatly appreciated.Roger
View 5 Replies
View Related
Oct 10, 2006
when i pass a input parameter, the SP doesn't recognize it.
like
exec SP 00004
it will print:
select * from table where idname = 4
i want it to print
select * from table where idname = '00004'
how can i do that?
View 11 Replies
View Related
Mar 21, 2006
I have a question that has a co-worker and myself confused. We are using the SQL Server Enterprise Manager. When I select return all rows in my tables, any content that is too long will appear as <Long Text> on my co-workers machine, but the column is blank on my machine. Is there a property or configuration that enables/disables <Long Text>? I am confused as to why it appears on other machines, but not mine.
Your help is appreciated.
Live Life.
View 8 Replies
View Related
Jan 1, 2007
Dataset "FromTimeDimension" is a report parameter and has values (yyyymm)= 200601,200602,200603,2000604....... I would like to always have the default for this parameter to always be the latest month...ie November is the most recent month in our cube, so I would want the parameter to default to "200611". However, when I try to use the "last" function, the error says that aggregate function cannot be used.
View 3 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Apr 28, 2008
I'd like to hide/show a table based on selected parameters. In the current setup I have a matrix and two tables underneath that need to be displayed from time to time. First of I use a multi-value parameter called "Lieferart". Depending on the parameter I have set the visibility of the two tables with the following expression:
=iif(Parameters!lieferart.Value(0) like "Nagel%", False, True)
This expression doesn't work though, any ideas??? I am also unsure about what I have to do If multiple values from the parameter list are selected as Parameters!lieferart.value(0) doesn't necessarily need to have a label like "Nagel" included...
View 3 Replies
View Related
Aug 14, 2007
I pass in 3 querystring parameters to my web form. The Object Data Sources pick up these parameters
and select the appropriate records.
I want to display one of the querystring parameters in my Page Header, specifically the one for Fiscal Year.
I could return the Fiscal Year in a column from the data source, but the Fiscal Year would not populate if
no records were returned...Therefore, I must get the querystring parameter that was originally passed in...
How do I populate the report control textbox with the value of querystring parameter?
Thanks!
Jim
View 14 Replies
View Related
Apr 4, 2007
Hi,
is there a way to force the numers to show in excel as numbers, not as text?
Thanks,
Igor
View 1 Replies
View Related
Dec 26, 2006
Hi,
I have dropdown parameter with multi-values allowed.
In my report headed I want to show all the dropdown values that were checked by the user to run the report. But since there could be a couple of hundred values I want to show ALL when all the values are selected instead of listing them one by one.
How can I do that?
Thanks,
Igor
View 4 Replies
View Related
Oct 29, 2007
I am in process of building a website where the user can upload files and then those files are loaded in to a sql server database. I am using some sprocs to scrub the data and then insert them into the production database.. And in my sprpc before and after updating or inserting a record or scrubing... i am returning the count by raising an error. or returning the rownumber where the error occured.. is there any way i can get the raise error part or whatever error i get while scrubing the data and relay it back to the user in a user freindly way or in a text file... or the best thing is can i open smalll window where i can show them what processing is goin on and alert them if there are any errors...
Any help will be appreciated.
Regards
Karen
View 5 Replies
View Related
Dec 20, 2007
I'm going to create a graph using SSRS. there is a date field. I want to show only the date , not with the time. How do I do this?
Also Can I use two different data sets in a single graph?
Thanks
View 3 Replies
View Related
Dec 27, 2006
I have a report that shows patient information, such as patient number, name, and admit date. It also has a date parameter. I enter in the date and it shows all the patients admitted that day. I would like to show the last date the patient was admitted before the date I ran the report for.
For example, if I run the report for 12/20/06, I want to see the patients that were admitted that day and their info like name, and patient number. I would also like to see the last date they were admitted.
View 1 Replies
View Related
Mar 14, 2007
Hi All,
I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.
Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.
Is this possible? I can not see any Visible property for report
parameters.
If yes, how to achieve this functionality?
Appreciate your help.
Regards,
Raghu
View 1 Replies
View Related
Nov 19, 2015
I tried creating Toggle Option over a Text box to Show the Image on Click but Since the Toggle refreshes the entire report user faces performance issue. Is there any other option to avoid the Toggle Refreshing the report or to show an image on Click of an Text Box?
View 3 Replies
View Related
Sep 14, 2007
I explicitly set one column to have text qualifiers in a flat file connection mgr and specified to use double quotes as the qualifier, yet in the output file, the column is not qualified. What did I leave out ?
View 2 Replies
View Related
Jan 5, 2004
I'm trying to write a select statement that will show me the total payments, last payment date, and last payment amount for each client. I get results but it is all payments. Can anyone help me with this?
Thank you,
Here is what I have tried:
SELECT dbo.tblClients.Client_ID, Sum(dbo.tblPaymentReceipts.[Amount Paid]) AS SumOfAmtPaid, MAX(dbo.tblPaymentReceipts.[Date]) AS LastPaymentDate, dbo.tblPaymentReceipts.[Amount Paid] INTO #temp_UNPaymentsA
FROM dbo.tblPayments INNER JOIN dbo.tblPaymentReceipts ON dbo.tblPayment.Pay_ID = dbo.tblPaymentReceipts.Pay_ID
WHERE (dbo.tblPaymentReceipts.[Date] BETWEEN '1/1/2001' AND '12/31/2003')
GROUP BY dbo.tblPayments.Pay_ID, dbo.tblPaymentReceipts.[Amount Paid]
Select * FROM #temp_UNPaymentsA
GROUP BY Client_ID, SumOfAmtPaid, LastPaymentDate, [Amount Paid]
HAVING SUM(SumOfAmtPaid) BETWEEN 0 AND 1000
View 3 Replies
View Related
Nov 7, 2007
How would you create a column which displays the difference of two other columns in SQL? For example, column C=column A – column B.
My idea is that when ever data enters column A and column B, column C should show the difference of the two automatically. A, B and C are datetime columns. I'm looking at setting up an 'after' trigger on the table. Is there a better approach? Thanks.
View 3 Replies
View Related
Jul 24, 2007
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
View 1 Replies
View Related
Oct 7, 2015
I'm developing an SSRS report using VS2013 Premium with SSDT - BI v12.0.2430.0. SSRS is hosted on a SQL 2014 instance.The underlying database table has a varchar(max) field which stores text and embedded image data from a third-party application. I can extract this text, save it as an html file and open that in a browser. It renders complete with any embedded image.Meanwhile, the report textbox has its Placeholder Properties, Markup type set to HTML. Yet when I run the report, the text is displayed but any embedded image is not.Is there any approach I can take, perhaps transforming the varchar(max) data to another format in the query for my dataset, that can show the text and any embedded image in my report? Or is it that the TextBox control is limited, not unreasonably, to text only? If so, is there another control I could use, perhaps custom or third-party?
View 7 Replies
View Related
Aug 11, 2013
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
View 18 Replies
View Related
Mar 12, 2008
Hi,
Basically the above is a very common requirement, please comment on my solution which I've arrived at by searching through the web; -
In summary I have used 3 SSIS components these are "Flat File Source", "Derived Column" and "SQL Server Destination".
1) File Connections Manager Editor
1.1) Within File Connections Manager Editor; -
Name the data type e.g. "INTERCHANGE_NET_APP_DATE_SRC"
and assign a type to the data type e.g. string[DT_STR]
1.2) Click on the Preview button to ensure the expected text is assigned to the expected data type.
2) Derived Column Transformation Editor
2.1) Assign Derived Column Name, e.g.
INTERCHANGE_NET_APP_DATE
2.2) Select <add as new column> within Derived Column.
2.3) Enter the conversion Expression, e.g. ; -
2.3.1)
(SUBSTRING(INTERCHANGE_NET_APP_DATE_SRC,8,2) + "/" + SUBSTRING(INTERCHANGE_NET_APP_DATE_SRC,5,2) + "/" + SUBSTRING(INTERCHANGE_NET_APP_DATE_SRC,1,4))
2.3.2)
Since the above conversion is such a common task I suggest that Service Pack 3 of SQL Server 2005 delivers the following functionality; -
STRINGTODATE ('YYYYMMDD',INTERCHANGE_NET_APP_DATE_SRC)
2.4) Select "database timestamp [DT_DBTIMESTAMP] " as Data Type.
2.5) Within the Mappings tab of the SQL Destination Editor have; -
Input Column as INTERCHANGE_NET_APP_DATE and
Destination Column as INTERCHANGE_NET_APP_DATE.
Please comment on the above, I will then pass on my suggestion to Microsoft.
Thanks in advance,
Kieran.
View 1 Replies
View Related
Aug 2, 2007
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NWHCConnectionString %>"
SelectCommand="SELECT [Title], [URL], [Date] FROM [Article] ORDER BY [Date] DESC"></asp:SqlDataSource>
<asp:Repeater id="myRepeaterUL" runat="server" DataSourceID="SqlDataSource1">
<HeaderTemplate>
<ul>
</HeaderTemplate>
<ItemTemplate>
<li><a href="<%# DataBinder.Eval(Container.DataItem, "URL") %>"><%#DataBinder.Eval(Container.DataItem, "Title")%></a><br /><%# Eval("Date") %></li>
</ItemTemplate>
<FooterTemplate>
</ul>
</FooterTemplate>
</asp:Repeater>
This is my code above, I am trying to order them to show the four new list of news. Here is a picture, yeah its old and everybody loves pictures. see the box on the right, i want to show only four, not all of it.
View 2 Replies
View Related
Feb 21, 2014
With this qry i need to only show in the result for ordate the date and not the time stamp. below is my qry and the first line of the results:
SELECT DISTINCT
adHock.dbo.PPVVINCE$.Corps, adHock.dbo.PPVVINCE$.House, adHock.dbo.PPVVINCE$.Cust,
IDST_EVENT_ORDERS.ORDATE,
IDST_EVENT_ORDERS.ORTIME,
IDST_EVENT_ORDERS.EVWMIN,
IDST_EVENT_ORDERS.EVTDES,
[Code] ....
result for the field trying to change
ORDATE
1/1/2014 12:00:00 AM
I Only want to see the date.
View 6 Replies
View Related
Jan 30, 2007
I asked this question below, but the answer was that the conversion will take place automatically, but I can't get that to happen. I have a flat file with an 8 position field that I identify as string (and I also tried date) that is yyyymmdd and it needs to go into the database field that is datetime format. IS there something I am doing wrong with the definition of it, or do I need to add some kind of conversion, and if so, what and how would that be done. I'm a dts Sql2000 expert, but the SSIS thing is driving me crazy. I have a ton of dts' to convert and the migration tool doesn't work because there are a lot of active X scripts in them. thanks for your help. Boston Rose
View 1 Replies
View Related
Nov 21, 2007
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
View 2 Replies
View Related
Aug 28, 2015
I've a table which contains a record for each day an employee is employed:In the cube I've create a measure which is a sum of the field "Employed" which provides me the number of employees that are employed for a given date (lowest level of my time dimensions which are YEAR-MONTH-DATE)The problem is that the number aggregating on YEAR and MONTH which provides me with wrong figures at these levels - So how can create a calculated measure (maybe with Scope) that only show the Ultimo Numbers at the lowest level when I am browsing on the Month or Year level. For example if I am on the Year level I only want it to sum on the date 31-12-xxxx and if I'm at the month level(for example July 2012) it should show me the sum of 31-07-2012 which are the last level for the given month.
View 4 Replies
View Related
Nov 6, 2015
Is it possible to display only the first few words of a block of text with a "Show More" link at the end, which when clicked would expand the block to show all content?
"Collapsed":
Lorem ipsum dolor sit amet, consectetur adipiscing elit,
<...show more>
"Expanded":
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
<... show less>
View 2 Replies
View Related
Jul 14, 2014
I have a date held in a varchar field in a temporary sql table and I want to convert it into a sql date and it doesn't work. I can replicate this as below -
So I run
select
cast ('14/02/2014' as date)
and I get a conversion failed error.
View 2 Replies
View Related
