Show Detail Data On A Matrix Rather Than Aggregate Data
Dec 12, 2007
Hi all experts,
I have a result set like:
Project
Milestone
Info
Project1
M1
Info1
Project1
M1
Info2
Project1
M2
Info3
Project2
M1
Info4
Project2
M2
Info5
Project3
M1
Info6
I need to create a report like:
M1
M2
Project1
Info1
Info2
Info3
Project2
Info4
Info5
Project3
Info6
But while I use matrix to build this report, I got the result like:
M1
M2
Project1
Info1
Info3
Project2
Info4
Info5
Project3
Info6
The report will not show the multiple records on the row group "Project" like item "Info2".
After I referred to the similar problem mentioned on this forums, I tried to use "RowNumber("Matrix1_Project")" to resolve it. But still I got the result like:
M1
M2
Project1
RowNumer
Info1
RowNumer
Info1
RowNumer
Info3
Project2
RowNumer
Info4
RowNumer
Info5
Project3
RowNumer
Info6
It would be much appreciated if anyone could give me some hints to complete the report I need.
I have used two matrix in one of my reports. One matrix is right above other. Both matrix's columns are allocated for month name. I.e there are 12 columns for each month of the year for each matrix. column name of the second matrix was hidden. so end user can see only first matrix column name and corresponding data in each matrix. But the problem is now, when there is no data for perticular month in first matrix, thats month's column does not appear at all. Lets say there is no data for November in first matrix. so Novem column is missing in first mtrix now. but still Novem column is shown on the second matrix as it has some data, although column name is not shown. I wonder how I can show all the columns of both matrix regardless of population of data.
I have one column in a matrix component and it has about 7 items, but the only the items which have values on the page appear at the top of that page.
This is for a labratory so the columns are the different Patient Types and the rows are the different Test Mnemonics. If one of the Patient Types is not used in any of the tests on that page, it doesnt show up. How to I make sure all Patient Types show up on every page?
I know similar questions have been asked but I wanted to try my luck that my issue is somehow different.
I am querying a database which has detail information (sales transactions) and is grouped by customer. I also have a table with one record for each customer with some historical sales information (summary information). The requirements for the report are to have the sums of the sales for each customer along with the historical data for that customer in the same row in the table. I haven't found a way to do this using one dataset and from what I've read, the current version doesn't support joining multiple datasets over a grouping field (customer).. or at all.
I have a matrix based report running, it shows a pivoted statistical value in the detail cells. Now I'd like 1 of 2 images to show instead, in those cells, based on the value of the statistic. Can this be done in a matrix?
Is it possible to create Expand/Collapse functionality for the grouped data in Table and Matrix data regions? Essentially, the idea is for the user to be able to see the group/subgroup data if she wishes to by clicking on (+/-) symbols, as is usually the case in Tree View style data grid control in web apps. Any ideas how to accomplish the same in reporting services?
I have a simple table data i want want to show row data in to column data. Â Â Â Â Â Â SELECT clblcode,mlblmsg FROM warninglabels
My expected result will beÂ
0001                0002 0003                      0004 -------               ------- --------                   -------- May Cause....       Important..... Take madi...........         Do Not Take.......
We are using a SQL Server 2000 Replication. I'm using the Merge Agent History Screen to retrive Informacion about replication sessions, is there any other screen to know exaclty which datawas replicated on each session?Or at least to know the script generated on each session?
i am trying to configure data collector on my server. so i configured data collector on server A and setup on server B. but the "Query statistics collection set" do not show me any data.
i right click and select "collect and upload now " item and get success result for this. but in the report i cant see any data...
also in the log page of data collection i see so many errors with messages like this:
"Failed to create kernel event for collection set: {2DC02BD6-E230-4C05-8516-4E8C0EF21F95}. Inner Error ------------------> Cannot create a file when that file already exists."
i tried some solution like disabling and enabling again, re-configuring, removing and configuring again .... but none of them work right.
I€™ve created with the help of some great people an SSIS 2005 package which does the follow so far:
1) Takes an incoming txt file. Example txt file: http://www.webfound.net/split.txt
The txt file going from top to bottom is sort of grouped like this Header Row (designated by €˜HD€™) Corresponding Detail Rows for the Header Row €¦.. Next Header Row Corresponding Detail Rows
€¦and so on
http://www.webfound.net/rows.jpg
2) Header Rows are split into one table, Maintenance Detail Rows into another, and Payment Detail Rows into a third table. A uniqueID has been created for each header and it€™s related detail rows to form a PK/FK relationship as there was non prior to the import, only the relation was in order of header / related rows below it when we first started. The reason I split this out is so I can massage it later with stored proc filters, whatever€¦
Now I€™m trying to somehow bring back the data in those table together like it was initially using a query so that I can cut out each of the Header / Detail Row sections into their own txt file. So, if you look at the original txt file, each new header and it€™s related detail rows (example of a cut piece would be http://www.webfound.net/rows.jpg) need to be cut out and put into their own separate txt file.
This is where I€™m stuck. How to create a query to combine it all back into an OLE DB Souce component, then somehow read that souce and split out the sections into their own individual txt files.
The filenames of the txt files will vary and be based on one of the column values already in the header table.
I have a recurrent problem with Data Viewers, it happens quite often that the Data Viewer does not shows any data altought I can see that some rows have passed through as there is a "XX Rows" on the data path where the Data Viewer has been added.
Sometimes it shows up sometimes not, I can't figure out why.
I'm working on a fairly complex query, and to avoid exploding my brainany further, I'm going to keep this simple with an example of what I'mtrying to do...Let's say you had a table of customers and a table of ordersAnd you had data that looked like this:CustomersCustID CustName-------------------------------1 Billy2 JohnOrdersCustID Amount PaidYN-------------------------------1 $2 12 $3 01 $4 11 $2 02 $5 0And you wanted a report that looked like this:Customer TotalPaid TotalUnpaid------------------------------------------Billy $6 $2John $0 $8How would you write a query to generate this report?
I'm still fairly new to cubes, so bear with me. I'm trying to figure out if I should include aggregate data (e.g. total employees per facility) in a dimension table or if I should use the finished cube to get the counts (MDX?). Thanks for any help that you can provide.
I`ve created a table in a list that is grouped by years. Result is a Report, that consists of several years (List grouped by years, each containing the table with the data of the year).
Now I want to aggregate some numbers of the table on each page (year) of the list.
The sum()-function - doesn't matter which scpoe I use - always aggregates only the values of the actual list (Year), not considering the years before.
2) SalesTransactions - multiple rows for each contract - relevant columns: ContractNo, InvoiceDate, Value
3) CostOfSaleTransactions - multiple rows for each contract - relevant columns: ContractNo, TransactionDate, Cost
How do I write a SELECT statement to produce rows containing:
ContractNo ContractName Sum of Value for ContractNo between @FromDate and @ToDate Sum of Cost for ContractNo between @FromDate and @ToDate
Not all Contracts have either Sales or CostOfSales Transactions in the relevant date range and so one or both totals can be zero.
I've written something like:
SELECT CT.ContractNo, CT.ContractName, sum(CT.Value) as TotalValue, Sum(CS.Cost) as TotalCost
FROM Contract CT
INNER JOIN SalesTransactions ST ON CT.ContractNo=ST.ContractNo
INNER JOIN CostOfSaleTransactions CS ON CT.ContractNo=CS.ContractNo
WHERE (ST.InvoiceDate BETWEEN @FromDate AND @ToDate) AND (CS.TransactionDate BETWEEN @FromDate AND @ToDate)
GROUP BY CT.ContractNo, CT.ContractName
The TotalValue and TotalCost figures I get are much higher than expected. I presume this is something to do with the JOINs or WHERE clause. Please can you advise how I get the correct values?
I recently upsized my acess 2000 db to SQL 2000, but I am now having errors . . .
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E07) [Microsoft][ODBC SQL Server Driver][SQL Server]The sum or average aggregate operation cannot take a nvarchar data type as an argument. /data_count.asp, line 4
The code within the asp file: <% dataSQL = "SELECT SUM(filesize) FROM DL where show=1" Set datacount = my_Conn.Execute(dataSQL) anBytes = datacount(0) %>
I am using SSRS 2014. I'm using a matrix instead of a tablix because it allows me to have dynamic columns. In the example I'm showing, two of the columns use the sum function to get the total counts per practice. The third column contains percentages so I averaged for the total but the value is inaccurate compared to the value I would get if the divided the the two totals that are sums of the counts. Is there a way for me to specify that I want to divide the total counts numerator divided by the total counts denominator?
Here's an example report output with the percentage column averaged (inaccurate):
PCP       numerator denominator percentage John Smith  66       104 63.46 Tom Jones   4         36   11.11 . . . Jane Doe    1   1     100 Total 708      1005     72.3
So the 72.3 value is from Avg(metricvalue)
I would like to do this instead: % total = 708/1005, which equals 70.5 - a significant difference.
The metricvalue column is what is the value for every number above (Because it's a matrix).
I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.
I have a report that is set up as a matrix. The repor shows data relating to review numbers (for example 1-6). Based on the date range selected from my parameters the report will show stats and the matrix grouping is by the review number.
My question is this, if the dataset returns only some of the review numbers, can I do anything to show the other review numbers? They will always be from 1-6.
I am using the below script and I am getting data for 15 minutes interval. I would like to aggregate this data to hourly so instead of reading for 2014-01-01 00:15:00.000 and 2014-01-01 00:30:00.000 I want all the data aggregated for 2014-01-01 00:00:00.000 and then for 2 o’clock. how should I tweak this query to sum the interval values and display it?
SELECT r.MeterId, r.ReadingDate, r.Reading FROM MeterReading r, MeterDetail d, Building b where r.MeterId = d.MeterId and d.BuildingId = b.BuildingId and b.BuildingName like '%182%' and r.ReadingDate between '2014-01-01'and '2014-01-10' order by r.MeterId
I have a source table with App_Id, App_Type , Tier_Type, Date_Id as columns. I have a destination table with Date_Id, Total_App_Count, Booked_App_Type_Count, Approved_App_Type_Count columns.
I need to count the Total number of records , count of records with App_Type = "Booked" and count of records with App_Type = "Approved" and populate in my destination table.
What all the steps i need to create in SSIS to get this results ?
I have a scenario which I am not able to figure out how to do it better for quite some time.
Assume I have a few rows of data : RunningID Date WOid 1234 1/23/2007 23 1236 1/24/2007 23 1239 1/2/2007 24 1222 1/4/2007 23 1321 2/4/2007 22
My objective is to merge all RunningID into a single cell when WOid is the same (this will most probably use a "group by" to get the different WOid out). Maybe some aggregate function that can do it as: select ReturnConca(RunningID, "#") as RunningID_str, max(Date) as MaxDate, max(WOid) as WO from tableXXX group by WOid
is have this code, and i know that i have a record with the ID=1 but it will not show the data from the record..<asp:Content ID="Main" ContentPlaceHolderID="ContentPlaceHolderMain" Runat="Server"> <asp:FormView ID="form1" runat="server" DataSourceID="SqlDataSource1"></asp:FormView> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnStrAccess %>" SelectCommand="SELECT [MainID], [MainText] FROM [SiteText] WHERE ([MainID] = ?)" ProviderName="<%$ ConnectionStrings:ConnStrAccess.ProviderName %>"> <SelectParameters> <asp:SessionParameter DefaultValue="1" Name="SiteMainID" Type="Int32" /> </SelectParameters>
</asp:SqlDataSource> </asp:Content> Why can't it show the record !??
I have a data base for some equipment on a few windows application forms written in vb 2005 express. eg Form1 for tools , form2 for nuts &bolts ect.
I wondered if it is it possible to set data base to open when the form loads and shows the data of that particular piece of equipment instead of always opening on equipment id number 1 for instance . For example when form3 loads ,equipment id is set to 3.
I'm using Reporting Services 2005. In my report I'm binding data in a matrix by grouping 3 row fields (nested within each other) and 1 column field. Now I get the subtotals alright but I also want to get percentage at row1 only rather than grouping it with either in row or in column. I've tried so many ways but am not able to do it. Can anybody help me on this or is there a way in SSRS 2005 to get over this.
Also please suggest something instantly, as I'm terribly in the need Thanks
how to solve this problem .... I want to select te sum of nvarchar column and this error always happen
what is the solution this is my query
"SELECT Datein AS Date,SUM(Durm) AS DurationMin, COUNT (*) AS 'Number of Hits' FROM Rayyan_Log WHERE (DNIS = '"+DropDownList1.SelectedItem.Text +"') AND (Datein between '"+TextBox2.Text+"' and '"+TextBox3.Text+"') GROUP BY Datein ORDER BY Datein"
