I have a Report Parameter Non-queried list for all months (Labels January, Februari... and Values 01,02...).
When I pick a month in my report all works fine
But I would also like to have data for the complete year (via an All selection)
How should I get this done . Any help appreciated
Edwin
Hi All,
would like to make a report with sales figures per month even is there are no sales figures that month.
Report should still show the month.
Any help to get me started in the wright direction much appreciated
edwin
I have the following table
FeedBack Type Date
test2 positive 03/15/08
tes3 negative 03/01/08
.. ....
in my page i need to select the number of negative/positive comments within the last
1 month, 6 months, 12 months
How can I accomplish that?
thanks
I am trying to build various reports that compares data over time. I have one that measures Year Over Year % difference for number of incoming projects. I managed to do that easily by calculating the following
YTDProjects:=if(ISBLANK(SUM('TrendData'[Projects])),blank(),CALCULATE(SUM('TrendData '[Projects]),DATESYTD(CalendarDate[FullDate])))
PYProjects:=if(ISBLANK(SUM('TrendData'[Projects])),blank(),CALCULATE(sum('TrendData '[Projects]),SAMEPERIODLASTYEAR(DATESYTD(CalendarDate[FullDate]))))
YoYDifference:=[YTDProjects]-[PYProjects]
YoYPercProjects:=IF([PYProjects]=0, BLANK(), [YoYDifference]/[PYProjects])
Where Projects is the metric in question, TrendData is the table that contains project data and CalendateDate is the Date Table. But now I am trying to compare the same YTD projects data to number of projects that came in the last 6 months. How do our projects compare to average number of projects that came in last 6 month period.
I tried the the DATEADD function instead but got no luck and data came out wrong!
PrevProjects:=CALCULATE(SUM([Projects]),DATEADD(CalendarDate[FullDate],-1,QUARTER))
For some reason, this also returns blank in my model:
QTDProjects:=TOTALQTD(SUM('TrendData'[Projects]),CalendarDate[FullDate])
Hi,
I want to select data from a table for last 13 months.
Can anyone tell me how to write the T-sql code for this?
The table looks like this.
FileMonth Type
2007-04-01 00:00:00.000 Total NULL 199886109.65
2007-04-01 00:00:00.000 Total Line 170724936.92
2007-05-01 00:00:00.000 Total Loan 29161172.73
2007-05-01 00:00:00.000 InstLend NULL 49780163.49
2007-06-01 00:00:00.000 InstLend Line 42450387.44
...........
So I wanna pull data from 04/01/07 to 04/01/08.
So I wanna write a query some thing like this.
Select *
from table1
where Filemonth BETWEEN PreviousMonth AND Last13thMonth
Thanks
Hi, i am trying to create a t-sql statement that will retrieve last months data (ie. if i run the query on 9th August, i only want to retrieve Julys data, 1st Sept will retrieve all of Augusts data etc). The query will be used once a month to populate a table, can anyone advise me on the correct where clause to use ?
Thanks in advance
Dave
Hi,
I have the following SSAS MDX query, currently taking a From & To date. How would I alter the MDX below so that just the prior 3 months data was returned for a chart of balances. I do not wish to retain the date parameters
SELECT NON EMPTY { [Measures].[EOD Book Balance] } ON COLUMNS, NON EMPTY { ([Time].[Simple Date].[Simple Date].ALLMEMBERS * [Products].[Product ID].[Product ID].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOMEMBER(@FromTimeDate, CONSTRAINED) : STRTOMEMBER(@ToTimeDate, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( { [Products].[Product Type].&[Term] } ) ON COLUMNS FROM ( SELECT ( { [Book Balance Type].[Balance Type].&[Credit Balance] } ) ON COLUMNS FROM [DailyBalances]))) WHERE ( [Book Balance Type].[Balance Type].&[Credit Balance], [Products].[Product Type].&[Term] ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
I have a date into format YYYYMM. Data type is int. I need to make query where every time it will return me last 3 months, but without current one. For example I have data for months below
201510
201509
201508
201507
Query should return all records for 201509, 201508, 201507.
I was trying lot of solutions founded in internet like this one:
Date_Column >= DATEADD(MONTH, -3, GETDATE())
or
DATEDIFF(MONTH, my_date_column, GETDATE()) <= 3
but it doesn't work.
Dear all,
I have a field [Month] in my table AA.having Data like ( January,February,March,April etc.)
I need to sort them by starting of month
lets say as
January
February
March
How i can i do this
Have no index and can't define a index on this field
Thanks for ur time and Help
Regards
Mohd Sufian
One of my report has different data types like decimal,percentage and integer values.
When I exported the report to excel , all the values are showing as "general" data type.
How to get excel data type same as ssrs report data type by default when exported to excel?
Hi,
I need to write a select query to get last six months data from a table , on monthly wise.Can anyone help me in writing this query
I am using sql server 2000.
eg: Jan...data
feb...data
TIA,
Ravi
I need to extract records for the last day of previous months (Up till January of the same year) from a table SALES, according to a date parameter ASOFDATE that the user enters.
For Example
If user keys in ASOFDATE as 10-May-2014, I would have
ASOFDATE Data1 Data2
10-MAY-2014 123 443
30-APR-2014 222 234
31-MAR-2014 544 875
28-FEB-2014 546 908
31-JAN-2014 957 896
How do I do that?
I have the following query:SELECT Month, Sum(Hits) AS Hits FROM tblHits GROUP BY Month ORDER BYMonthUnfortunately it only returns rows for months that have data assignedto them.How can I tweak this so that months 1-12 are returned, and Hits = 0 formonths with no data in the base table?Thanks.
View 2 Replies View RelatedI have 5 TB of data in production and my development team requested to restore only last month data(<=500 MB ) in staging server and last 2 months data in pre production.
View 3 Replies View RelatedMy goal is to show the most recent 12 months of data including the current month based on a patients discharge date (relative to the query execution time). There could be many years of data so I want to be sure I am pulling the most recent 12 monthsThis seems to work (on the surface anyway … not quite sure if this is the best logic to use).
DATEDIFF(month,PAT_ENC_HSP_discharged.HOSP_DISCH_TIME,
GEtDate())
< 13
I am working in sqlserver 2008 R2 and below is my sample research query. I am trying to get previous 6 months data.
WITH CutomMonths
AS (
SELECT UPPER(convert(VARCHAR(3), datename(month, DATEADD(MM, DATEDIFF(MM, 0, GETDATE()) - N, 0)))) Month
,DATEADD(MM, DATEDIFF(MM, 0, GETDATE()) - N, 0) startdate
,DATEADD(MM, DATEDIFF(MM, 0, GETDATE()) - N + 1, 0) enddate
FROM (
VALUES (1)
[Code] ...
Current output what i am getting:
Expected Output:
I found why the April month i didn't get the $20 because the startdate of my perks CTE '2014-04-03'. If it is '2014-04-01' then i will get the expected output.
But i should not change the the date on perks. How to neglect this date issue and consider the month instead to get the expected output.
I have a table which has XML data, so it takes lot of time to delete it.
Here's the condition:
Archive all data older than 2 months and delete it.
What would be the good approach for this?
I have a data set that returns the following
Customer
pncount
pn%
monthval
ABC
5
30
01/01/2007
DEF
9
20
01/01/2007
GHI
4
40
01/01/2007
ABC
DEF
4
90
02/01/2007
GHI
7
10
02/01/2007
ABC
4
5
03/01/2007
DEF
GHI
6
100
03/01/2007
but I need this
01/01/2007
01/01/2007
02/01/2007
02/01/2007
03/01/2007
03/01/2007
abc
5
30
4
5
def
9
20
4
90
ghi
4
40
7
10
6
100
Any Idea Help
Hi there,
if any body out there has done this before, can you please post the T-SQL script that calculate whatever last months of data based on a Date field.
Thanks very much,
Manny
I created a report in Reporting Services which was working. Then I filled in the "No Rows" section in the properties of a tablix in the report. Now it shows the No Rows message even if there is data. If I open the Shared Dataset that is used in the report and open Query Designer and run the query I get data.
View 11 Replies View RelatedHere is my code. Basically what I am doing is selecting from the database based on the current user. The ReaderResults.Text label is not showing the info pulled from the database, and the ReaderError.Text label is not showing an error. I also tried putting the ReaderResults.Text label inside the loop and that didnt work. Any suggestions?
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")Dim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL As String
selectSQL = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd2 As New SqlCommand(selectSQL, con)
Dim reader As SqlDataReaderDim CompanyKey
Try
con.Open()
reader = cmd2.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
ReaderResults.Text = CompanyKey
Finally
con.Close()
End Try
The ReaderResults.Text is not returning a value. I am not sure what is going on because the table and all columns are full, Label1.Text shows the current username of the user loggedon, and no error is showing up in ReaderError.Text. Anyone have any ideas?
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")
'Job1 InfoDim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL1 As String
selectSQL1 = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd1 As New SqlCommand(selectSQL1, con)
Dim reader As SqlDataReaderDim CompanyKey
'Job1 Select
Try
con.Open()
reader = cmd1.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
ReaderResults.Text = CompanyKey
Finally
con.Close()
End Try
hey folks,
i am looking for code to show the last entry of a database that has a unique field. for eg.. i have columns AREA, NAME, NUMBER. i need to show the last entry for each unique area.
so if there was 5 seperate areas, the table would show the last five entries for each area. anyone help?
I have a linked server that was built on PostgreSQL database connection. When I try to query one of the tables in the linked server it is giving attached error.
View 1 Replies View RelatedI have this script which outputs a combination of financial data. I have recently joined a table that includes a narrative and when I run the query, it runs perfectly. However, when I copy and paste the output into Excel, not all the data is showing. After the process of elimination, it is because Excel doesn't like the narrative column and not all data is copied across which is very annoying. If I remove the narrative column, then all the data copies over correctly.
I am using Excel 2010 which is quite up-to-date.
Hello
I am making the switch from using MSACCESS to do required reporting to using Reporting Services to accomplish the same tasks.
A requirment I have is that whenever a graph (chart) is created, it contain the underlying data in a connected and aligned data table. MSACCESS allows this by selecting the chart options and then "show data table".
Is this ability included in Reporting Services in MS Visual Studio 2003 .NET? If so, how can I enable it? I currently can only enable the legend.
Currently we are using:
SQL Server 2000 (sp3a)
Reporting Services (sp2)
Visual Studio .NET 2003
Thanks for any and all help.
Ben
Hello all,
I have a simple query "Select distinct batch_id from batch WHERE batch_id = 123 or batch= 345
I run this query in MS query on the proper db and it gives me nothing.
I run the same query in the sql server console and the data is there.
As mentioned I am on the proper db since it works fine for some of my batch_id's for the 2 most recent one !!!??? They are in the db but I cant select them ....
Any idia ?
I have a table with Million plus records. Due to Running Totals article, I have been able to calculate the Trial_Balance for all months.
Now I am trying to provide a Beginning Balance for all months and the Logic is the Beginning Balance of July would be the Trial_Balance of June. I need to be able to do this for multiple account types. So the two datasets that need to be included in logic is actindx and Calendar_Month.
For actindx of 2 and Calendar_Month of 2014-01-01The Trial_Balance_Debit is 19585.46 This would make the Beginning_Balance of actindx 2 and Calendar_Month of 2014-02-01 19585.46
I am trying to do some type of self join, but not sure how to include each actindx number differently.
Table creation and data insert is below.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TrialBalance](
[Trial_Balance_ID] [int] IDENTITY(1,1) NOT NULL,
[Code] ....
Everything is set up the way it should be, as far as we can tell.
However, when we drop in a SQL data source and try to configure, it, we
get a blank box for choosing the connection string, and it won't let us
make a new one.
Has anyone encountered this before? If so, how can we fix it?
I'm trying to only show yesterday's data based on a date that is stored as a varchar. I converted it to smalldatetime but I'm getting an error that says "Conversion failed when converting date and/or time from character string." I don't know how I have to alter the conversion.
Here is my code:
CONVERT(varchar(20), CONVERT(date, CONVERT(varchar(8), date_added), 112),110) = dateadd(day,datediff(day,1,GETDATE()),0)
I created a procedure called 'Longtextprocedure'. The length of this procedure is 650000 characters long. When I was giving the following query - select len(routine_definition) from INFORMATION_SCHEMA.routines where ROUTINE_NAME = 'Longextprocedure'; Length is showing as '4000' characters long. It is not showing the remaining part of the procedure, it is showing upto the 4000 characters of procedure code. But when you execute the procedure(exec 'Longtextprocedure') it is showing the exact result.
My question is i want to read all the 650000 characters long procedure code{select routine_definition from INFORMATION_SCHEMA.routines where ROUTINE_NAME = 'Longextprocedure'} to a variable which is varchar(max).
When i am trying to read the whole procedure code it is taking 4000 characters of data into the variable not the whole. Is there a way to read the huge procedure code into the variable?
Code:-
CREATE PROCEDURE FAKEPROCEDURE @procName VARCHAR(50) --@procName is 'Longtextprocedure'
AS
BEGIN
DECLARE @routineDefinition VARCHAR(MAX);
DECLARE @replaceToChar VARCHAR(MAX);
[Code] ....
When i am trying to execute the line EXEC(@dupliacteRouteDef), it is showing like there is no procedure defined. This is due to '@dupliacteRouteDef' variable is having 4000 characters of data not the whole data. Is there a way to read whole procedure data into the variable irrespective of the length of the string?
Assume I have a heirarchy like the following:
- John Smith
- James Jones
- Robert Allen
- Lisa Andrews
- Bob Thompson
Now, I have a report where whoever is logged in will only see data for themselves and those below them, so John Smith would see everyone including himself, but Lisa Andres would only see herself and Bob Thompson. James Jones would be able to see everyone except John Smith.
How do I go about implementing this code, for example in an asp.net page where one of the user's logs on to view the report. Currently, there is a T-SQL function that creates a user heirarchy table, but it is very slow and I am curious if SSRS 2005 has any new capabilities in handling this.
Thanks,
Saied
I have two instances in SQL on my machine. When creating a New Data Source in BIDS, I can only see the default instance. I have checked the SAC manager to make sure the second instance allows remote connections and the setting are exactly the same as the default. Any ideas? Thanks.
View 4 Replies View Related