Shrink TempDB Error

Feb 8, 2006

Hello friends..
We are getting below error every day.we have job Shrink TempDB which runs every hour..but once a day we are getting this error.Is this error becasue of other jobs also running by that time which uses huge resource from DB..I cant understand why???.. can any body have an idea??

Executed as user: NT AUTHORITYSYSTEM. ...97031). The PageId in the page header = (1:1056620160). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297030). The PageId in the page header = (1:-1839155936). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297029). The PageId in the page header = (1:1057229472). [SQLSTATE 42000] (Error 8909) Table error: Object ID 0, index ID 0, page ID (1:297023). The PageId in the page header = (0:0). [SQLSTATE 42000] (Error 8909) Table error: Object ID 0, index ID 0, page ID (1:297022). The PageId in the page header = (0:0). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297021). The PageId in the page header = (1:1056467424). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297015). The PageId in the page header = (2:1071640160). [SQLSTATE 42000] (Error 8909) Table error: Object ID -7207189... The step failed.

Papillon

View 15 Replies

TempDB Won't Shrink

Jan 18, 2008

I was able to find a few posts on this topic, but none of them quiteseemed to fit the situation, so I'm hoping that someone else might beable to help me here.I have a client who is using SQL 2005 (sorry, don't have the exactbuild with me). They run a weekly process which causes TempDB to growto over 100GB before it fails due to a full disk. Once it's grown tothat size we can't seem to shrink it again short of restarting theserver.The database is set to Simple recovery mode and I believe that it isset to auto shrink.Here are some things that found out/tried:DBCC SHRINKFILE (tempdev, 50000) does nothing.DBCC OPENTRAN returns no transactions.If I look in TempDB for any temporary tables, I get a couple dozen.They all have zero rows in them though. I didn't think to look at thecolumns that they contain, but maybe that will give me an indicationof their use. I used SELECT OBJECT_NAME(id), rowcnt FROMtempdb..sysindexes WHERE OBJECT_NAME(id) LIKE '#%'sp_spaceused shows that almost none of the space is actually beingused.I've looked for reindexing operations in their code and didn't seeany, but there's quite a bit of code there. While there are someoperations against some very large tables, I didn't see any obviouscartesian products or sorts either. Again though, there's a lot ofcode and I haven't profiled much of it.My plan right now is to reboot, set up a trace to track both filegrowths and SQL statements and then see if I can find whichstatement(s) are causing the TempDB to grow to be so large. Anysuggestions on additional things to track? Even given this though, Idon't know if that will help me with the shrinking issue, except topossibly prevent it from being necessary in the future.Any advice or suggestions welcome. Please let me know if I've left outany important information. I always seem to forget at least oneobviously important bit of information. :-)Thanks!-Tom.

View 2 Replies View Related

Shrink Tempdb Problem

Dec 22, 1999

Hi,

We're running our database on SQL Server 7 and we've setup the tempdb to grow automatically.Gradually,it has grown upto 11390 MB and the used space is only 14 MB.It's not shrinking when we used the shrinkdb option.We cannot move the tempdb to RAM as it's very big.Can anyone help us in this...

View 3 Replies View Related

Shrink Tempdb Question

Jul 1, 1999

How do you shrink the tempdb in SQL Server 7 after you allocated a large space to it but later realized you allocated too much.... I need to reclaim the space allocated to it but when I try to change the size or do a shrinkdb it either tells me I cannot shrink it smaller than allocated size or it shrinks tempdb to current (which is too large)... I looked online but could not find anything...

Any suggestions or assistance would be much appreciated... up to my eyes in tempdb..... Bill.

View 1 Replies View Related

TEMPDB Doesn't Want To Shrink?

Jun 4, 2004

Hi Guys,

Tempdb in one of our SQLSERVER is standing at 5GB. I try to shrink it to 2GB, using following commands.

DBCC shrinfile(2,2000)

DBCC SHRINKDATABASE (tempdb, 2000)

It doesn't want to shrink at all... I ran sp_spaceused it give following results

Reserved data indx_size unused.
808 KB 384 KB368 KB 56 KB

I dont understand why tempdb doesnt want to shrink...?? help is greatly appericated.. thanks..

View 4 Replies View Related

Dump Or Shrink Tempdb

May 30, 2002

Does tempdb ever need to be shrunk, or have it's log (does it even have one) dumped or does sql server handle this chore?

View 2 Replies View Related

Shrink Or Move Tempdb

Oct 1, 2007

One of my boxes was built with all of the system databases on the C: drive, and tempdb is up to 2 GB and there is no room left on the drive

It should have been installed on the D: drive

I've never had to do this before, mostly because I never install sql serevr on the c partition

Any war stories or suggestions

View 10 Replies View Related

How To Shrink The Tempdb.mdf And Master.mdf

Jan 29, 2008

I have a install of SQL 2005 that is about 5 months old. The tempdb.mdf and master.mdf files have ballooned to a huge size almost filling my hard drive. How do I reset them to a reasonable size?

View 14 Replies View Related

How Can I Shrink My TempDB Databse?

Jul 23, 2005

I have a problem with my TEMPDB Database.It gets extra size throughimporting data into one of my databases in same server.How can I shrink my TempDB Databse?Thanks

View 1 Replies View Related

Tempdb Shrink (newbie)

May 10, 2006

Hi,

I'm running Sql 2000 with many users logged in. My tempdb database has grown to a large size 3/4 of it free space. Is there a way to shrink the database while users are logged on. I tried using the enterprise mgr. to shrink the tempdb database, but it did not work. How can I shrink this? It's using a ton of free space.

Thank You in advance

View 3 Replies View Related

Shrink Tempdb Below Original Size.

Feb 11, 2002

I have a tempdb that was created at 1Gig. I don't know why but I want to shrink it below the original creation size. Is there a way to shrink this file or create a new file and delete the old?

I have tried shinkfile and shrink database with no luck.

Thanks Jeff

View 6 Replies View Related

How Do I Shrink/recreate/truncate Tempdb

Apr 17, 2002

A customer on SQL7 has a 40GB tempdb (which is usually 2-5GB) which has filled the drive. ShrinkDb/ShrinkFile do nothing as the db has only 2GB of free space. How can I truncate the data or blitz tempdb and create a new (2-5GB) one (Stopping the server, deleteing the .mdf, starting the server creates a new tempdb with the same size as the old one!)

View 2 Replies View Related

Difficult Shrink Tempdb Question

Jul 2, 1999

View 1 Replies View Related

SQL 2012 :: Script To Backup And Shrink TempDB

Oct 2, 2015

I need a script to Backup & Shrink tempdb.

namesize
tempdev1024
templog64
tempdev21024
tempdev31024
tempdev41024
tempdev51024
tempdev61024
tempdev71024
tempdev81024

I can't believe how many tempdb's there are?

View 8 Replies View Related

TempDB MDF File Is Increasing - Unable To Shrink It?

Apr 27, 2015

Output of below query is

SELECT session_id,
SUM(internal_objects_alloc_page_count) AS task_internal_objects_alloc_page_count,
SUM(internal_objects_dealloc_page_count) AS task_internal_objects_dealloc_page_count
FROM sys.dm_db_task_space_usage where internal_objects_alloc_page_count >10 and session_id> 50
GROUP BY session_id;

[Code] ....

Database MDF is 27806 MB and I tried to shrink but unable to shrink. It is production server.I do not want Restart sql server.There is no open transaction.

View 6 Replies View Related

Shrink Error Log

Feb 17, 2000

Is there a way to shrink the error log in SQL 6.5 without stoping the server?

View 1 Replies View Related

614 Error On A User Database And 806 Error On Tempdb Seen In The Error Log

Jan 5, 2002

Hi,

We have a production SQLServer 6.5 running with service pack SP5a update:

I got the following 2 errors.....

1.

Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'

2.

I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.

For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?

For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)

I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.

model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.

tempdb:

Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.

I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.

for tempdb:

Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.

for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.

for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.

All system databases and userdatabase recovered successfully when I restarted sqlserver.

Please advice how to get rid of this problem.

Thanks in advance,
Anu

View 4 Replies View Related

Transport Level Error Returned When Trying To Shrink A Data File Using DBCCSHRINKFILE ('DB', Size)

Nov 30, 2007

Greetings:

I have a database that is 1.7terabyte in size with 136gb free and throws a "transport level error" telling me to discard the results when I run dbccshrinkfile ('DBNAME', size). I have tried various increments of size, from truncateonly to 1MB below its current value, and nothing works. I have tried to detach and reattach the db, restart the service, restart the server, and none have provided a solution. Any ideas?

Regards,
Derek

View 1 Replies View Related

TempDB I/O Error

Jul 29, 2002

Hi All,

I get this error message randomly when running a stored proc that creates a bunch of temp tables with indexes. Select/Into temp tables are also done. Has anyone seen this before? Thanks.

I/O error (bad page ID) detected during read of BUF pointer = 0x14e1dbc0, page ptr = 0x7904e000, pageid = (0x1:0xdaaa), dbid = 2, status = 0x801, file = D:MSSQL7DATATEMPDB.MDF. [SQLSTATE HY000] (Error 823). The step failed.

View 1 Replies View Related

Tempdb Error

Sep 17, 2001

i have problem when i run stored procedure.
"Could not allocate space for object '(SYSTEM table id: -594960911)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full."
can i change physical device "tempdb.mdf" and "tempdb.ldf" from drive c: to drive d:.
tx be4,
andi

View 1 Replies View Related

Error Ecountered For Tempdb !!

Aug 14, 2002

Dear all,

I found an error in my NT server event log viewer that related to SQL server tempdb. The error detail is as follow:

Error Source: MSSQLServer
Type: Error
Category: Server
Description: "Error: 9002, Severity: 17, State:2"
"The log file for database 'tempdb" is full. Back up the transaction log for the database to free up some log space"

I am just wondering what is the cause of the problem and what should I do next to get rid of this problem.

Appreciated it if you can give me some idea what's the impact for this error and how to fix this problem.

Thank U very much,

Cheers,

Chris Fung,

View 1 Replies View Related

Size Of Tempdb & Log Error

Sep 9, 2001

What should be size of tempdb.

I am daily getting tempdb translog is full error.
Then i need to dump the transaction with dump traan.... with no log.

After this only server working fine.

Any solution please...

Thanks in Advance.

Selvam

View 1 Replies View Related

SQL 6.5 And Error 1105 On Tempdb

Aug 3, 1999

On out SQL 6.5 server we keep getting error 1105;

Can't allocate space for object '-486' in database 'tempdb' because the 'system' segment is full.

This seems to suggest that tempdb is not large enough. However I can't see how to expand the database larger than the current 6mb. I can only expand the log, and have done so to a 1000mb. Still keep getting the same error.

Any suggestions ??

View 1 Replies View Related

I Have Only Data And Log Device And Get Tempdb Full Error

Jan 26, 2004

I am using 6.5 .
Here is the error that i get
Think that tempdb is small how do i change that or what is this error about'

--------------------------
AIMSMan
---------------------------
Application-defined or object-defined error 40002

37000: [Microsoft][ODBC SQL Server Driver][SQL Server]Can't allocate space for object '##RevByNetSALIMJUMMA' in database 'tempdb' because the 'default' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.( 1105)

ODBC

I only have data and log device how do i increase the tempdb device

let me know

SEJ

View 4 Replies View Related

Tempdb: PRIMARY Filegroup Full Error.

May 22, 2008

Can anyone help please?

I am getting the following error:

Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 162781324115968' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
Msg 9002, Level 17, State 4, Line 1
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases

Regards,
Krishna

*Learning IT from experience*

View 4 Replies View Related

One Command Keeps Causing 'tempdb' Is Full Error

Jul 20, 2005

I keep getting the following error message when I run a serie of SQLcommands:Server: Msg 9002, Level 17, State 6, Line 15The log file for database 'tempdb' is full.Back up the transaction log for the databaseto free up some log space.I have tried "dump transaction tempdb with no_log" right before I runthe SQL command. But that doesn't help.The serie of SQL commands that I try to run is the following:create table #NewBatOp(BatchJournalID uniqueidentifier not null,batch_nr varchar(5) null,OperationNum varchar(3) null,OperationHours real null,EmployeeNum varchar(6) null,OperationDate datetime null,IsOverTime tinyint null)-- |-- Comment this one line-- | out will not triggerinsert into #NewBatOp -- <---| the errorselectbj.BatchJournalID, bj.batch_nr, bo.opno,bo.hrs, bo.bonno, bo.dat, bo.otflgfrom batop boinner join BatchJournal bj onbo.bat = bj.batch_nr andbj.BatchJournalID in(select BatchJournalID from BatchControl)if ( @@error <> 0 )goto OnErrordrop table #NewBatOpgoto EndTestOnError:drop table #NewBatOpprint "Error: Failed to import new batch-operations intojournal."EndTest:I have tried running the above statements in ISQL and in QueryAnalyzer, and I get the same error.I didn't have this problem before I have moved the database from oneserver to another server.- The OS in the old server is Windows-NT,and the SQL Server in the old server is the 2000 version.- The OS in the new server is Windows-2000,and the SQL Server in the old server is the 2000 version.The settings in tempdb in both servers are more or less the same.Actually, the tempdb in the new server is actually much bigger thanthe one in the old server. The size of the transaction logs in bothserver are the same (and cannot be changed manually). Both the dataand the transaction log of tempdb can automatically grow in 10%increment and no restriction on size.The data-and-log of the tempdb are both in one hard disk. The harddisk has 10-GB free space available. Moreover the size of the resultset from the "select" statement above is only 530KB (around 3000 rowsin the result-set). I believe it is a very small database operation.Therefore, I don't think the size has anything to do with the error.I don't think the "inner-join" clause is the cause of the problem. Thereason is that I have used the same "inner-join" clause in otherqueries, and they don't have any problem. As a matter of fact, I haveused many other queries that are far more complicated and have createdmuch bigger result set in tempdb, and they don't have this problem.I am very puzzled of this error. Can someone give me a pointer?Thanks in advance for any info.Jay Chan

View 10 Replies View Related

DBCC CHECKDB, MSSQLSERVER_8974 Error In Tempdb

Dec 5, 2007

During the night I run a checkdb that reported a error in tempdb, log down in post for more info.
Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 0, text ID 296853831680 is not referenced.
If run a checkdb know it��s not finding any problem. I��m bit confused what to do restart the server to get new tempdb? I check with for SQL Server 2005 Books Online for the ��MSSQLSERVER_8974�? error, it tells me to look after a ��Look for Hardware Failure�?. In the sql server log its stands that its have found 82 errors
DBCC CHECKDB (tempdb) executed by AIR5MSSQLService found 82 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 3 seconds.
Directly after this a stackdump are generated. Somewhere in the middle of my dbcc script.
After the i get the result of the next databases.
DBCC CHECKDB (model) executed by AIR5MSSQLService found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 0 seconds.
This is compress version of the log of dbcc job
NEW COMPONENT OUTPUT
Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3042
Report was generated on "FLEFSE".
Maintenance Plan: Underhåll
Duration: 00:12:55
Status: Warning: One or more tasks failed..
Details:
Check Database Integrity (FLEFSE)
Execute TSQL on Local server connection
Execution time out: 1800
Task start: 2007-12-05T02:00:01.
Task end: 2007-12-05T02:12:57.
Failed-1073548784) Executing the query "DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT name FROM sys.databases WHERE state_desc='ONLINE'
OPEN AllDatabases
DECLARE @DBNameVar NVARCHAR(128)
DECLARE @Statement NVARCHAR(300)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
WHILE (@@FETCH_STATUS = 0)
BEGIN
PRINT N'CHECKING DATABASE ' + @DBNameVar
SET @Statement = N'USE ' + @DBNameVar + CHAR(13)
+ N'DBCC CHECKDB (' + @DBNameVar + N')'
EXEC sp_executesql @Statement
PRINT CHAR(13) + CHAR(13)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
END
CLOSE AllDatabases
DEALLOCATE AllDatabases
" failed with the following error: "Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 0, text ID 296853831680 is not referenced.
Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 1, text ID 296853897216 is not referenced.
... to ...
Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 81, text ID 296871985152 is not referenced.
CHECKING DATABASE master
DBCC results for 'master'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'master'.
DBCC results for 'mssqlsystemresource'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'mssqlsystemresource'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE tempdb
DBCC results for 'tempdb'.
.... removed lines ...
CHECKDB found 0 allocation errors and 82 consistency errors in table '#4225BEF1' (object ID 1109769969).
.... removed lines ...
CHECKDB found 0 allocation errors and 82 consistency errors in database 'tempdb'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (tempdb).
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE model
DBCC results for 'model'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'model'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE msdb
DBCC results for 'msdb'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'msdb'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE ReportServer
DBCC results for 'ReportServer'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'ReportServer'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE ReportServerTempDB
DBCC results for 'ReportServerTempDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'ReportServerTempDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE caisqlp
DBCC results for 'caisqlp'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'caisqlp'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BKALKYL
DBCC results for 'BKALKYL'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BKALKYL'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE distribution
DBCC results for 'distribution'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'distribution'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE DMVstatsDB
DBCC results for 'DMVstatsDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'DMVstatsDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BALDATA
DBCC results for 'BALDATA'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BALDATA'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE VirtualCenterDB
DBCC results for 'VirtualCenterDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'VirtualCenterDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BINGE01
DBCC results for 'BINGE01'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BINGE01'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BMATINK
DBCC results for 'BMATINK'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BMATINK'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BORDE01
DBCC results for 'BORDE01'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BORDE01'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BSTATISTIK
DBCC results for 'BSTATISTIK'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BSTATISTIK'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE MPSmartDB
DBCC results for 'MPSmartDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'MPSmartDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE SmarTeamPilot
DBCC results for 'SmarTeamPilot'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'SmarTeamPilot'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE STATISTIK
DBCC results for 'STATISTIK'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'STATISTIK'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE VBAS
DBCC results for 'VBAS'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'VBAS'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE MDataMM_0F
DBCC results for 'MDataMM_0F'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'MDataMM_0F'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE DLDB
DBCC results for 'DLDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'DLDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE ILDB
DBCC results for 'ILDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'ILDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.

". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:USE master;
GO
SET NOCOUNT ON;
GO
DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT name FROM sys.databases WHERE state_desc=''ONLINE''
OPEN AllDatabases
DECLARE @DBNameVar NVARCHAR(128)
DECLARE @Statement NVARCHAR(300)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
WHILE (@@FETCH_STATUS = 0)
BEGIN
PRINT N''CHECKING DATABASE '' + @DBNameVar
SET @Statement = N''USE '' + @DBNameVar + CHAR(13)
+ N''DBCC CHECKDB ('' + @DBNameVar + N'')''
EXEC sp_executesql @Statement
PRINT CHAR(13) + CHAR(13)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
END
CLOSE AllDatabases
DEALLOCATE AllDatabases
GO
SET NOCOUNT OFF;
GO

This is the top of the stack-dump
=====================================================================
BugCheck Dump
=====================================================================

This file is generated by Microsoft SQL Server
version 9.00.3042.00
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.

Computer type is AT/AT COMPATIBLE.
Current time is 02:00:08 12/05/07.
8 Unknown CPU 9., 2333 Mhz processor (s).
Windows NT 5.2 Build 3790 CSD Service Pack 2.

Memory
MemoryLoad = 98%
Total Physical = 8189 MB
Available Physical = 163 MB
Total Page File = 9795 MB
Available Page File = 1527 MB
Total Virtual = 8388607 MB
Available Virtual = 8373732 MB

DBCC RESULTS
--------------------

... lines removed ....
**Dump thread - spid = 107, PSS = 0x00000000EE497BC0, EC = 0x00000000EE497BD0
***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0009.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 12/05/07 02:00:08 spid 107
*
* DBCC database corruption
*
* Input Buffer 510 bytes -
* DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
* SELECT name FROM sys.databases WHERE state_desc='ONLINE' OPEN AllDatab
* ases DECLARE @DBNameVar NVARCHAR(128) DECLARE @Statement NVARCHAR(30
* 0) FETCH NEXT FROM AllDatabases INTO @DBNameVar WHILE (@@FETCH_STATU
* S = 0) BEGIN PRINT N'CHECKING DATABASE ' + @DBNameVar SET @Stat
* ement = N'USE ' + @DBNameVar + CHAR(13) + N'DBCC CHECKDB (' + @DB
* NameVar + N')' EXEC sp_executesql @Statement PRINT CHAR(13) + C
* HAR(13) FETCH NEXT FROM AllDatabases INTO @DBNameVar END CLOSE A
* llDatabases DEALLOCATE AllDatabases
*
* *******************************************************************************
* -------------------------------------------------------------------------------
* Short Stack Dump
PSS @0x00000000EE497BC0
-----------------------

My DBCC script looks like this
USE master;
GO
SET NOCOUNT ON;
GO
DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT name FROM sys.databases WHERE state_desc='ONLINE'
OPEN AllDatabases
DECLARE @DBNameVar NVARCHAR(128)
DECLARE @Statement NVARCHAR(300)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
WHILE (@@FETCH_STATUS = 0)
BEGIN
PRINT N'CHECKING DATABASE ' + @DBNameVar
SET @Statement = N'USE ' + @DBNameVar + CHAR(13)
+ N'DBCC CHECKDB (' + @DBNameVar + N')'
EXEC sp_executesql @Statement
PRINT CHAR(13) + CHAR(13)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
END
CLOSE AllDatabases
DEALLOCATE AllDatabases
GO
SET NOCOUNT OFF;
GO

View 2 Replies View Related

How To Shrink A Tranlog Which Won't Shrink

Jan 5, 2007

If you have problems shrinking a transaction log no matter what commands you issue, here's a way to shrink the tranlog:

1. Right click on the properties of the database and go to the options tab.
2. Change the recovery mode to simple.
3. Right click again on the database - go to all tasks - shrink database.
4. Shrink the database.
5. Change the recovery mode back to what you had it as.

I found this out by trial and error as I could not find any documentation on it and no matter what I tried, I could not get the transaction log to shrink.

View 4 Replies View Related

SQL Server 2005 SP2 -- Error With ASP.Net Session State Using TempDB

Mar 14, 2007

I have an ASP.Net (C# 2.0) application that has been using SQL Server 2005 Standard Edition with Service Pack 1 to hold the session state in a testing environment. Currently, the session state is being stored in TempDB, rather than the ASPState database. This has worked very well for us until yesterday. We installed SQL Server 2005 Service Pack 2, as well as the Critical Update for Service Pack 2 (KB933508). Once the SQL server was rebooted, I got the following error message when I tried to access the web application.
The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The INSERT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
In the web.config file for the application, I have a SQL username and password defined that can access the ASPState database. To correct this issue, I had to give this user db_datareader and db_datawriter access to tempDB.

Has anyone else run across this problem, and is it related to SQL Server 2005 Service Pack 2?

View 1 Replies View Related

Tempdb Log Full Error With Plenty Of Disk Space Available

Jul 23, 2005

has anyone met with this before?the setting is SQL2K with SP3 on a 2 node active-active W2K3 cluster.on one of the machine, it occasionally prompts for the following error:"The log file for database "tempdb" is full. Back up the transactionlog for the database to free up some log space."the problem is, at the time of error, the tempdb tx log is only 200MBand there are over 50G disk space available.settings of tempdb:-- 10% autogrow, unlimited max size-- auto shrink off-- data file around 1GThanks.

View 3 Replies View Related

Tempdb Is Skipped. You Cannot Run A Query That Requires Tempdb

Jul 14, 2004

Has anyone seen the SQL Server error:

"tempdb is skipped. You cannot run a query that requires tempdb"?

We're running a .Net web application with a SQL Server 2000 backend, and we get the error intermittently. Restarting the SQL Server service seems to fix it, as it causes tempdb to be rebuilt, but this isn't a long term solution. Any direction or hints would be greatly appreciated. Thanks!
- Mike

View 11 Replies View Related

Shrink DB

Jun 6, 2002

I have a SQL 7.0 sp3 server and I am trying to shrink a production database for use on other servers. The database/log sizes are 9601mb / 138mb with 772mb / 128mb free. I truncate a table that contains binary data. After this the database/log sizes are 9601mb / 138mb with 6634mb / 111mb free. The next step is to use EM to issue a shrink db. After this the database/log sizes are 6807mb / 378mb with 9.56mb / 365mb free.

After the use of truncate the the data in the datafile is about 2967mb.
After the shrink db the data in the datafile is about 6797mb.

The size of the data grew after the shrink db was issued. I looked at the tables and the space is largely associated with two tables that have a binary field, but the number or rows are still the same. I ran a checkdb just to make sure that there was not a problem and no problems were reported. I have used this process many times and this is the first time I have come up with these results. Any suggestions?
Thanks,
Glen

View 2 Replies View Related

Shrink Db

Aug 17, 2001

if I shrink the db will it enable me to create another db with that space released by the first db?

View 1 Replies View Related