Simple Error Question?
Jun 29, 2006Hello all!
Working with SQL 2000. If I create a rollback trigger for a value that can not be less 0. After it rolls back, can I throw a custom error message in my .net application from SQL?
Thanks!
ADVERTISEMENT
Working Since Morning, Simple Error But Unable To Resolve, ERROR : 26 , Please Help
Dec 15, 2006dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
Simple Syntax Error
May 7, 2008I'm using sql server 2005 and in sql management studio I am getting a syntax error from this simple below code:
WITH CustListTemp AS
(SELECT OrderID, Locked, OrderStatus, Resubmissions, ROW_NUMBER() OVER (ORDER BY OrderID) AS RowNumber
FROM dbo.OrderInfo
)
Can somebody please tell me what ther error is so I can correct it? I even had someone at work take a look at it and couldn't get it either.
DTS Package Error - Something Simple?
Dec 11, 2003I have a multi-step DTS package that I get the following error when I try to execute it:
Package Error
Error Source : microsoft ole db provider for sql server
Error Description : [DBNETLIB][ConnectionOpen (connect()).]SQL Server does not exist or access denied
Am I missing something obvious? I'm sure it is something simple but I can't seem to get it. Thank you in advance for you assistance.
Simple Update Error
Jul 20, 2005Hey all,i have a students_table which i want to do a multiple update on.Update student_tableset grant = 35000where course_id = 2There are lots of students in the student table which have course_id of2.I get this error:Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used as anexpression.The statement has been terminated.Does anyone know how to do a multiple update like this.It seems such asimple thing but im confused*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedRidiculously Simple Syntax Error
Feb 16, 2007in SQL query analyzer i have this skeleton test query:
DECLARE @nLen int
DECLARE @strData varchar(200)
DECLARE @strDelim varchar(50)
DECLARE @nPos int
SELECT
OwnersName1
= (IF len(OwnersName) > 0 OwnersName
-- IF dbo.InString(OwnersName,'&',1) > 0 'yes'
--if dbo.InString(OwnersName,' AND ',1) > 0 'yes'
--if dbo.InString(OwnersName,', ',2) > 0 'yes'
--ELSE OwnersName
)
,
OwnersName2 = OwnersName
--@strDelim as Delim
FROM dbo.TateWake
WHERE OwnersName>'9'
i get this error:
Server: Msg 156, Level 15, State 1, Line 8
Incorrect syntax near the keyword 'IF'.
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near 'OwnersName'.
if i replace
IF len(OwnersName) > 0 OwnersName
with: len(OwnersName)
there is no error.
what the heck is going on?
thanks...
Ridiculously Simple Syntax Error
Feb 16, 2007this is my 3rd attempt at posting this. other attempts did not post for some reason. now i'm home from work and so i can't cut and paste. this is from memory.
in query analyzer, i made a ridiculously simple query which returns a syntax error that i can't resolve:
SELECT name1 =
(
IF len(name) > 0 len(name)
),
name2 = name
FROM ownertable
this gives an error something like:
syntax error near IF on line 3
when i remove the IF len(name) > 0
the expression is evaluated as expected with no error. what is going on?
I must apologize for the simplification, but my posts kept going to the ether for some reason. I have had other dba's look at it and no one knows why this is happening in my office. nor can i understand why my posts don't stick. i even got a message from the forum app that i posted a duplicate message!
Error While Executing Simple Query :(
Dec 21, 2007Hi,
I am using this query to execute but it didn't
declare @AccountID numeric(3,0)
set @AccountID = 101
select * from AccountTest
WHERE AccountID IN
(CASE
WHEN @AccountID = 101 THEN (100,101)
ELSE @AccountID
END)
I m getting error like
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ','.
Pls help me out
T.I.A
2005: SIMPLE QUESTION: Error Log
May 30, 2006Hello,When I received a message "... See the SQL Server errorlog for details...." I opened Management / SQL Server Logs where I see:Current - 2006-05-30 12:19:00Archive #1 - 2006-05-30 09:49:00Archive #2 - 2006-05-30 08:27:00etc.But each of these logs contains "0 Item(s)". How to see log entries?Thank you very much/RAM/
View 2 Replies View RelatedSET RECOVERY SIMPLE Generates Error
Feb 27, 2006I've come across several references indicating that the recovery model can be set to simple by using the following sql statement:
ALTER DATABASE dbname SET RECOVERY SIMPLE
However, all I get is the error message below. What is the correct syntax?
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '.'.
Msg 195, Level 15, State 7, Line 1
'recovery' is not a recognized SET option.
Error With A Simple JOIN Query....
Apr 12, 2007Hi!
I've a big problem by using the following query :
Code Snippet
public SqlCeResultSet selectRSQuery(String query)
{
SqlCeResultSet resultSet = initializeCommand(query).ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);
return resultSet;
}
SqlCeResultSet resultSet = sgb.selectRSQuery(
"SELECT p.pId, p.pLogin FROM Profiles p, ProfilesGroups pg, Groups g " +
"WHERE g.gId = pg.tpGroupId " +
"AND p.pId = pg.tpProfileId " +
"AND g.gProfileID = '" + app.Settings.Default.id + "'");
It return me this error :
Cannot generate an updatable cursor for the query because there is a non-standard join expression.
What can I do??
Thxx
Pre-execute Error In Simple Import/export
Mar 17, 2006I am trying to copy data from a SQL Server 2000 DB to SQL Server 2005 DB using the import/export wizard in SQL Server Management Studio. The two databases are not identical with different table names and different columns but I thought I had set up all the right mappings and had set the 'Enable identity insert' option. When I ran the wizard it errored at the Pre-execute phase. I simplified the wizard down to one table and only as couple of varchar columns and this also errored in the same way. The error report is detailed below.
For reference the SQL2000(ent. edn) DB is on a windows 2000 server and the SQL2005(dev. edn) DB and the management studio are both on my WinXPSP2 workstation.
Could somebody explain why these errors have occured and more importantly how to rectify the problem?
Many thanks,
Michael.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Warning)
Messages
Warning 0x80047076: Data Flow Task: The output column "DateAdd" (23) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)
Warning 0x80047076: Data Flow Task: The output column "DateChg" (26) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)
... NOTE: I have removed the rest of the warnings as they were the same as above (many of them).
- Pre-execute (Error)
Messages
Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - Nrs_NewsArticles" (112) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [NereusV2_1].[dbo].[Nrs_NewsArticles] (Stopped)
- Post-execute (Stopped)
- Cleanup (Success)
Messages
Information 0x4004300b: Data Flow Task: "component "Destination - Nrs_NewsArticles" (112)" wrote 0 rows.
(SQL Server Import and Export Wizard)
Simple Expression Returns Error In Report, Why?
Apr 22, 2008So, here is my expression that I use in a textbox on the site header. In the report it just returns error... any ides?
="Wareneingangsübersicht" + " " + today() + " / " +
iif(datepart("WeekdayName",dateadd("d",1,today()))= "Samstag", DateAdd("d",3,today()), DateAdd("d",1,today()))
Error Msg While Running Relatively Simple Query (large Result Set)
Jul 17, 2007While running query below on SQL Server 2005 (Build 3790: Service Pack 2):
SELECT DISTINCT pkg.PrimaryBarcode
FROM dbo.Package AS pkg (NOLOCK)
JOIN dbo.PackageCycle AS pc (NOLOCK)
ON pkg.PackageKey = pc.PackageKey
WHERE (pkg.BillCycleDateKey >= 20061201) OR
(pkg.BillStatusKey = 1)
I received a partial result set followed by
An error occurred while executing batch. Error message is: Couldn't replace text
I suspect this is a memory issue, but cannot find any reference to this particular msg on the Microsoft forums or the other 3rd party forums. PrimaryBarcode is a varchar(50)
I am not sure where to go from here. I would appreciate any ideas. Thanks in advance.
Cheers,
Mike Byrd
Please Help This Should Be Simple Trying To Use Variables With A Copy DB Control Flow, Ssis Reports Following Error:
Dec 26, 2007Why isn't there some documentation on how to do this. This should be really simple and it has taken me 2 weeks and I still haven't gotten an answer. Please Help Does anyone know the answner or some place where there is some documentation!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I get the following error when I try to substitute the strings in the databasedetails collection with variables:
Error: Object reference not set to an instance of an object. StackTrace: at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.CheckLocalandDestinationStatus(Database srcDatabase, DatabaseInfo dbDetail) at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSpAttachDetach()
I created the following variables:
strDestinationDB = AirCL2Exp_new3
strDestinationDBPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAAirCL2Exp_new3_Data.mdf
strDestinationLGPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAAirCL2Exp_new3_Data.ldf
strSourceDB = AirCL2Exp
strSourceDBPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDataDataNewAirCL2Exp_Data.mdf
strSourceLGPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDataDataNewAirCL2Exp_Log.ldf
I then assigned those variable to DatabaseDetails Collection:
DatabaseName = @strSourceDB
DestinationDatabaseName = @strDestinationDB
Inaddtion I also assigned the following to the two DatabaseFiles Collection:
for 0:
DatabaseFileSize = 0
DestinationFilePath = @strDestinationDBPath
FileType = DatabaseFile
SourceFilePath = @strSourceDBPath
SourceSharePath = @strSourceDBPath
for 1:
DatabaseFileSize = 0
DestinationFilePath = @strDestinationLGPath
FileType = LogFile
SourceFilePath = @strSourceLGPath
SourceSharePath = @strSourceLGPath
Simple DB Operations Are Throwing Native Exception Error - 0xc0000005 - Intermittently
Dec 4, 2006Hi All,
We have written a multithreaded application in which we are maintaining separate Database connections for each thread. these connections are opened and closed at the start and exit of the thread.
We have observed that even if there is only one thread running ( application thread), execution of simple Select queries some times throws Native exception(Error - 0xc0000005 ).
This error comes intermittently. Execution of same query doesn't throw exception.
Further investigation by breaking the debug at the time of native exception and then looking into the stack trace shows that native exception has occured at one of the Native API (CompileQueryPlan() ) which is being called implicitly by the SQL Mobile.
Each time when we see native exception stack trace shows failure at CompileQueryPlan() call.
Let me know if this is a known defect in SQL Mobile 2005 or there is something else that is causing native exception.
Thanks,
Nikhil
Fatal Error Doing Simple Queries From An Sql 2000 To Sql 2005 Exported Database
Jun 8, 2006I have been trying to export an sql2000 database to sql2005 with no luck. I continuosly get the error
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have looked upon all support material and have installed the latest sql2005 service pack, but this has not fixed the problem. a simple query as:
select * from [transaction] ta,transactionentry tr
where tr.transactionnumber=ta.transactionnumber and
glacctid=6 and ta.[time]> '3/01/2006'
would produce this fatal error.
the current version I am using is:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
This problem is happening on some of the most important tables in the database.
the error log contains the following:
2006-06-06 11:43:32.59 spid54 ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0001.txt
2006-06-06 11:43:32.59 spid54 SqlDumpExceptionHandler: Process 54 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2006-06-06 11:43:32.59 spid54 * *******************************************************************************
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * BEGIN STACK DUMP:
2006-06-06 11:43:32.59 spid54 * 06/06/06 11:43:32 spid 54
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * Exception Address = 0136B4F0 Module(sqlservr+0036B4F0)
2006-06-06 11:43:32.59 spid54 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2006-06-06 11:43:32.59 spid54 * Access Violation occurred writing address FFFFFFFC
2006-06-06 11:43:32.59 spid54 * Input Buffer 260 bytes -
2006-06-06 11:43:32.59 spid54 * select * from [transaction] tr,transactionentry te where tr.
2006-06-06 11:43:32.59 spid54 * transactionnumber = te.transactionnumber and glacctid = 6
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * MODULE BASE END SIZE
2006-06-06 11:43:32.59 spid54 * sqlservr 01000000 02BA7FFF 01ba8000
2006-06-06 11:43:32.59 spid54 * ntdll 7C800000 7C8BFFFF 000c0000
2006-06-06 11:43:32.59 spid54 * kernel32 77E40000 77F41FFF 00102000
2006-06-06 11:43:32.59 spid54 * MSVCR80 78130000 781CAFFF 0009b000
2006-06-06 11:43:32.59 spid54 * msvcrt 77BA0000 77BF9FFF 0005a000
I have followed instructions on some support issues posted but none have helped. If anyone has any solution to this problem PLEASE HELP!!!!.
Thanks.
Simple Simple Linking Tables & Perform Calculation
Mar 22, 2007found it
View 3 Replies View RelatedError: Button Click Is Undefined - Simple If Statement With Sql Command Wont Work (c#)
Feb 2, 2008hello it seems lack of c# skills is getting the better of me here...iv been trying to get this to work for hours now without success. I have just started working in c# so i am a beginner :)
all i want to do it query the database, check to see if a title exists, if yes then populate textbox saying 'title in use' but if the title doesnt exists then continue executing rest of code to add the title.
You'll notice iv tried to use string variables and sqlDataAdapter but i cant get these to work either...please help
so far i have this that keeps giving me the error that my button click is undefined: protected void bookButton_Click(object sender, EventArgs e){
//string title;try{SqlConnection conn1 = new SqlConnection();
conn1.ConnectionString =
"Data Source=Gemma-PC\SQLEXPRESS;" +"Initial Catalog=SoSym;" +
"Integrated Security=SSPI;";SqlCommand findTitle = new SqlCommand("SELECT title FROM Publication WHERE title='" + titleTextBox.Text + "';", conn1);
conn1.Open();
findTitle.ExecuteNonQuery();
/*
DataSet myDataSetTitle = new DataSet("PublicationTitle");
myDataSetTitle.Clear();
myDataAdapterTitle.Fill(myDataSetTitle);//myDataSet contains results from above SELECT statement
title = myDataSetTitle.Tables[0].Rows[0]["title"].ToString();*/
}catch(Exception ex)
{TitleInvalidMessage.Text = "Title Not Accepted: This title is already in use by another publication" +ex.Message;
}
//title does not exist in table so continue and add to database
//rest of code here
Simple Question (Hope Simple Answer Too)
May 26, 2004Hey,
I have MS SQL database.
I have procedure:
code:--------------------------------------------------------------------------------
CREATE PROCEDURE dbo.Reg_DropTable
@ModuleId varchar(10)
AS
declare @TableName varchar, @kiek numeric
set @TableName = 'reg_'+@ModuleId
begin
DROP TABLE @TableName <- HERE I GOT ERROR
end
GO
--------------------------------------------------------------------------------
I got error when using variable with tables names.
How to do this?
Ps. Number is send to this function and it must drop table with name Reg_[That number]
Simple Join Not So Simple
Feb 21, 2007I am receiving funny results from a query. To simplify, I have 2 tables (todayyesterday). Each tbl has the same 8 columns. My query joins the two tables then looks where either of two columns has changed. What is happening is that when checking one of the columns it seems as though sql is flipping the column, causing it to be returned in error.
result set
colA colB colC colD colE colF colG colG (from yesterday)
1 1 a b c d e m
1 1 a b c d m e
So what's happening is that the record above is actually the same record and should not be returned. There is a daily pmt column that changes but I am not using that in the query. Aside from that the two records are identicle.
Any help is appreciated.
Simple Join Not So Simple
Aug 19, 2006Hi,
I have the following situation (with a site that already works and i cannot modify the database architecture and following CrossRef tables -- you will see what i mean by CrossRef tables below)
I have:
Master table Hotel
table AddressCrossRef (with: RefID = Hotel.ID, RefType = 'Hotel', AddrID)
joins
table Address (key = AddrID)
table MediaCrossRef (with RefID = Hotel.ID, RefType= 'Hotel', MediaID)
joins
table Media (with MediaID,mediaType = 'thumbnail')
foreach hotel, there definitely is a crossRef entry in AddressCrossRef and Address tables respectively (since every hotel has an address)
however not all hotels have thumbnail image
hence i have hotel inner join AddressXReff inner join Address ..... however i must have
left outer join mediaXref left outer join media
the problem is that if there is no entry in Media or mediaXref, I don't get any results
i tried to get over it by using
where (media.mediaTyple like 'thumbnail' or media.mediaType is null)
but then i started getting multiple results for each hotel because media's of type movie or full_image or etc... all got returned
any clue?
thanks
This All Seemed Simple Enough...
Mar 24, 2007...when I started this endeavor.
I have a previously developed Lotus Notes App. The idea was simple; as
I am sefl taught on Lotus Script, I figured I'd be able to stumble my
way through VB.Well,
it started OK. I used VB Express to get familiar with the stuff, but
decided to go with a full version of VS 2005 and try and get this thing
properly developed as a web app. I purchased several reference books
etc., and have become relatively familiar with the forums here.First
issue I have is that I simply want to use code to update or add records
to an SQL DB. I know about datagridview etc., but I want to update the
DB using forms, not the tabular view those controls provide. I thought
it would be relatively straight forward, but found my ignorance runs
deeper than I thought. When I tried to do so I am finding I am not
really clear on where to make declarations etc. in the web app. If anyone could point me in the right direction that would be great. The
issue with searching these forums is most posts deal with datagridview
or something similar.I have spent a ton of time trying to find relevant
posts or articles, but have had no luck yet.Again, all Ireally
need is a nudge in the right direction. I am more than willing to plod
through reference materials or articles/posts to find what I need to
know, I just can't find where to even start on the info I need. Regards, Joe
Its Got To Be Simple....
Feb 24, 2008 Hi
I have a problem with my sql WHERE query, if i manually type ([Area] = 'The First Area') then it is okay but if i try and pass the variable 'The First Area' using the
([Area] = @Area) it doesnt work.
ALTER PROCEDURE dbo.StoredProcedure1(@oby nvarchar,@Area char,@Startrow INT,@Maxrow INT, @Minp INT,@Maxp INT,@Bed INT)ASSELECT * FROM(SELECT row_number() OVER (ORDER BY @oby DESC) AS rownum,Ref,Price,Area,Town,BedFROM [Houses] WHERE ([Price] >= @Minp) AND ([Price] <= @Maxp) AND ([Bed] >= @Bed) AND ([Area] = @Area)) AS AWHERE A.rownum BETWEEN (@Startrow) AND (@Startrow + @Maxrow) Please Help I know it must be something simple as the sql works but not when i pass the variable.... Thanks In Advance
Simple SQL
Dec 30, 2004How can i get an output like this from this sql??
HEM_PATIENT_ID is primary key...
Output:
First row: initial values of the fields
Second row: average of the same fields
Please help me...
select * from (
select HEM_LOKOSIT, HEM_NNS
from LPMS.HEMOGRAMS
where HEM_PATIENT_ID = 33
union
select AVG(HEM_LOKOSIT), AVG(HEM_NNS)
from LPMS.HEMOGRAMS
where HEM_PATIENT_ID = 33)
order by HEM_LOKOSIT desc nulls last;
Simple Help
May 20, 2001Am new to SQL Server , can any1 tell me is there anyway to display date in this format month and year like Apr 2000 ,excluding the day.
eg: 01/28/2000 should b displayed like Jan 2000
Should Be Simple !!!!
Jan 25, 2001Hi,
I'm relatively new to SQL7 but I did use 6.5 a fair bit.
I'm trying to test the restore of the Transaction log backup and having a bit of difficulty. The idea is that I make a complete database backup at 1am backup the transaction log every 30 minutes between 7am and 7pm. I need to be able to restore the database to a known state between 7am and 7pm with a max data loss of 30 minutes.
What I am trying to achieve is (as a test):
1)Create a small test database with a test table
2)Add some data to the test table
3)Back up the transaction log
4)Restore the transaction log to 'undo' the data added in step 2
Should be simple I think !!! The problem I am encountering is that in step 4 it won't let me restore only the transaction log (a tick automatically appears in the database backup as well). Bah !
Can someone please tell me what simple steps are required to get this to work. I need specifically on what options to chose during the backup and restore processes.
Thankyou,
Tim
Simple SQL
Nov 8, 1999Given one table with one column and two rows, one containing the string 'Bill', one containing the string 'Gates'.
Write a select statement which gives you the result 'Bill Gates'.
???+
Simple SQL
Apr 2, 2003Hi All,
I have a table with 2 columns which looks like the following.
IDText
-------------
1AAA
1BBB
1CCC
2DDD
2EEE
2FFF
3GGG
3HHH
3III
Each ID can have multiple texts associated with it. I want to write a query that gives me the following output.
IDText
-------------
1AAA; BBB; CCC
2DDD; EEE; FFF
3GGG; HHH; III
I appreciate your help
Thanks
Simple SQL
Apr 2, 2003Hi All,
I have a table with 2 columns which looks like the following.
IDText
-------------
1AAA
1BBB
1CCC
2DDD
2EEE
2FFF
3GGG
3HHH
3III
Each ID can have multiple texts associated with it. I want to write a query that gives me the following output.
IDText
-------------
1AAA; BBB; CCC
2DDD; EEE; FFF
3GGG; HHH; III
I appreciate your help
Thanks
Looks Simple But ...
Jan 11, 2007Hi,
I have a table with two columns. I need to find distinct value of col1 and the correspondin repeated value of col2 for that col1 value with comma seperated list. Is there any function
for this in MS SQL?
I need somethgn like
a 1,2,3
b 4,5
c 7
d 5,55,5
I can do that with creating 2 cursors but looking for some easy way around.
Any suggestion and help highly appretiate.
Thanks
Simple Sql ?
Jan 20, 2006incorrect syntax near #
how do i fix this and did i make any other errors?
SELECT Master.CheckNum, Master.CheckDate, Master.ExpenseType, Deal.Alias, Detail.InvoiceDate, Detail.InvoiceAmount, Detail.Person, Detail.Deal, Detail.InvoiceNum, Detail.Reference, Detail.idDetial
FROM Master INNER JOIN (Deal INNER JOIN Detail ON Deal.Deal = Detail.Deal) ON Master.CheckNum = Detail.CheckNum
WHERE (((Master.CheckDate)>#12/5/2005#) AND ((Deal.Alias)="aic"));
Using And In Simple Sql
Apr 15, 2008Originally i had:
DELETE FROM #RptDetails WHERE StructureType <> @StructureType
AND #RptDetails WHERE #RptDetails.TraderId <> @TraderId OR #RptDetails.TraderId is null
But it didnt delete the structure types i changed to :
DELETE FROM #RptDetails WHERE StructureType <> @StructureType --AND
DELETE FROM #RptDetails WHERE #RptDetails.TraderId <> @TraderId OR #RptDetails.TraderId is null
and it did, how do i format the 2nd sql into 1 statement and what was i doing wrong?