I have two tables table1 and table2 and having a common column "col1"
When i ran the following query
UPDATE table1, table2 SET col1=FALSE WHERE id = 1;
getting the following error
Error Code: 1052
Column 'col1' in field list is ambiguous
id column exist in both the tables and need to update both the tables to false where the id is equivalent to 1.
I'm trying to do the following:
update a tables value(a single column), based on a query of another database, using a common column.
Here's what I've cooked up so far:
Declare @trackingNo nvarchar (50)
Set @trackingNo =
(
select tracking_no from P21_Shipping.dbo.shipping_data t1
inner join P21.dbo.oe_hdr t2 on t1.order_no = t2.order_no
[Code] ...
print @trackingNoThe error it's returning is:
Msg 512, Level 16, State 1, Line 3
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
So, I'm wanting to query Shipping_data for order_No that matches the same orderNo column value in P21 Database(oe_hdr table), then update P21 oe_hdr table with "trackingNo from Shipping_data
I have two tables table1 and table2 and having a common column "col1"
When i ran the following query
UPDATE table1, table2 SET col1=FALSE WHERE id = 1;
getting the following error
Error Code: 1052 Column 'col1' in field list is ambiguous
id column exist in both the tables and need to update both the tables to false where the id is equivalent to 1.
how to achieve this in single query?
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[APPL_STATUS_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[STATUS_START_DATE] [datetime] NULL,
[STATUS_END_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]...
where including/excluding a single column in an empty staging table would influence a resultset returning from distributed query? Both servers are SQL Server 2012. Nothing special about the staging table. It contains 12 columns with a mixture of INT and NVARCHAR(256) columns. In one case I exclude the column and the query returns in 17 seconds. When I include it the query does not return. Excluding the INSERT INTO the staging table and query returns in 17 secs with and without the column.
View 3 Replies View Relatedhi guys i have a problem;;;
i have to update table'''
querey is--TABLE1 HAS A COLUMN CALLED CITY .THE RECORDS WITH CITY='DELHI' ARE IS TO BE UPDATED WITH CITY='MUMBAI' AND THE RECORDS WITH CITY='MUMBAI' ARE IS TO BE UPDATED WITH CITY='DELHI' ...
i HAVE TO WRITE A SINGLE SQLSTATEMENT TO DO THIS NOT WITH THE HELP OF CURSOR
hi,friends
we show record from multiple table using single 'selectcommand'.
like....
---------
select *
from cust_detail,vend_detail
---------
i want to insert value in multiple database table(more than one) using single 'insert command'.
is it possible?
give any idea or solution.
i want to update value in multiple database table(more than one) using single 'update command'
i want to delete value in multiple database table(more than one) using singl 'delete command'
it is possible?
give any idea or solution.
it's urgent.
thanks in advance.
I want to update Flag column in second table based on the Adder names.
If the Applicatiion has atleast one AIX and Adder name is UDB then the flag would be True.
If the Application has more the one AIX and Adder names are diferent then the flag would be null.
APpName OS Adder
App1 ||| Windows|||Null
App1 ||| Linux |||UDB
App1 ||| AIX |||UDB
App1 ||| Linux |||Sql
App2 ||| AIX ||| UDB
App2 ||| Windows||| UDB
App2 ||| Linux ||| UDB
App2 ||| AIX ||| UDB
OUTPUT SHOULD BE LOOK LIKE BELOW
APpName OS Adder Flag
App1||| Windows|||Null|||null
App1||| Linux |||UDB |||null
App1||| AIX |||UDB |||null
App1||| Linux |||Sql |||null
App2|||AIX ||| UDB|||TRUE
App2|||Windows||| UDB|||TRUE
App2|||Linux ||| UDB|||TRUE
App2|||AIX ||| UDB|||TRUE
Hi,
I have Table A . we already have 80 columns . we have to add 65 more columns.
we are populating this table from oracle .and we need to populate those 65 columns again from the same table.
Is it a better idea to add those new 65 columns to the same table or new table.
If we go for the same table then loading time will be double, If I go for new table and If i am able to run both the packages which loads table data from same oracle server to difffrent sql tables then we should be good. But if we run in to temp space issues on oracle server . Then i have to load the two tables separately which consumes the same time as earlier one.
I was thinking if there is a way in SSIS where I can pull data from same oracle table in to two diff sql tables at same time?
Table Name:-emp
table structure:- Name Gender
A Male
B Male
C FeMale
D FeMale
I want only one update query to update this table like this
table structure:- Name Gender
A FeMale
B FeMale
C Male
D Male
please help me?
hi friends
in my sqlserver 2005 i want to update two tables in a single query.
is it possible? or is it possible by creating a view?
thanks in advance.
shweta
I need to write a single query that will append the values from one table into another table but I need to update a single field in the table with a static value. What I'm working with is an Access .adp with an SQL 2000 backend. The database is used to track ticket sales, payments, and contact info for season ticket holders. Prior to upsizing, each year the database would be copied and then choice bits modified for the next year.
In other words, the history was in several databases, i.e. db2001, db2002, db2003 and for the current year dbcurrent. I decided to create a historic tables in the current DB rather than have umpteen DBs on my SQL server.
My problem is that I need to create a query that appends to my table the previous years data and then updates the season field to reflect the season that the data came from.
In short, say I have a table named accounts
with fields
account, customer, addr1, addr2, ..., ticket type
and I want it to end up in
account_hist with fields
account, customer, addr1, addr2, ..., ticket type, SEASON
and make the season equal say 8 which represents the 8th season the team has played.
I can get both queries to work seperately :D , but for end user ease, I want to perform both actions at the same time :confused: .
Can anybody point me in the right direction?
Thanks
Hello,
I'm collecting id based on user's selection and storing to ArrayList/String[in asp.net]. Now want to pass those ids stored to stroed procedure. I want SP to update all records in single statement using in like update table set field in (value).
I'm storing id with comma (,) separator. Below is my asp.net code:
string sId=string.Empty;
for(int a=0;a<Id.Count;a++)
{
Id += Id;
if(a!=Id.Count-1)
sId +=",";
}
In database id column is int type. I'm passing id collected with comma separator and passing it as a parameter to SP. but it is giving error related converting to int or similar.
Plz help me create Stored Procedure in SQL 2005 based on above scenario.
Thanks
I know this isn't right but I'm trying to build a single query in PHP to re write the sortorder column starting at 0 and writing every row in order.
Code:
update categories set (sortorder=0 where catid=32), (sortorder=1 where catid=33),(sortorder=2 where catid=36) where userid=111
PHP Code:
$qt="update categories set ";
for($i=0;$i<$num;$i++){
$a=$i+1;
$qt.="sortorder=$i";
if($a<$num){
$qt.=", ";
}
}
$qt.=" where userid=111";
Using PHP I can amend the loop above to slot in a row I want so I can change the sort order.
unfortunately I'm not sure how to build such a query in mssql, can anyone help?
Hello All,
I want to update multiple tables using single query and fields name are same of tables.
I am trying like:
update tablename1 t1,tablename2 t2 set t1.fieldname1 = t2.fieldname1 = 'value' where condition;
or
update tablename1 t1,tablename2 t2 set t1.fieldname1 = 'value' t2.fieldname1 = value where condition;
Plzzzzzz help me.Thanx in advance.
Thanx & Regards,
Smita.
Hi,
I am using SQl server 2005.
want to update rows in 2 tables,which have a relation on Id field.
Some thing like
Update tblA a , tblB b
Set a.UpdatedDt=getdate(),b.Updateddt=getdate()
where a.Id=b.Id and a.Name='xyz'
can anyone out there help me?
Thanks
Renu
Hi, I have 2 databases, located on two different servers. One server is running sql 7 server, the other is running sql sever 2000.
When data is inserted in one table of the sql server 7 DB, I would like to automatically insert this new data into the table of the sql server 2000 db. Can I do this with a trigger and I how do I do this? Pleas help Thanks
Eric
Hi groupI have a rather peculiar question, and I really don't know how to solvethis within an SQL statement:Given a view (v), that results in:IDX-----------------1a1b2a2c3aI'd like to query the view with something like:SELECT ID FROM v WHERE (X='a' AND X='b') which would result in:ID-----------------1or in another case:SELECT ID FROM v WHERE (X='a' OR X='c')would give:ID-----------------123how can this be done?TIAbernhard--www.daszeichen.chremove nixspam to reply
View 14 Replies View RelatedA problem has come up in designing a Web page to maintain a small reference table in SQL Server 2000 (9 columns, about 25 records).
I tried to design the Web page to allow INSERT and UPDATE operations using a single page that posts back to itself. The page contains a set of empty form fields for a new record, followed by a set of filled-in form field for each row in the table. The form fields for existing records are given a unique name based on the field name concatenated with the primary key value for that row.
If I set up the page to INSERT only, it works properly. But when I add the fields for existing records, the INSERT operation malfunctions. Specifically, anytime a set of existing fields for a particular column is added to the page, the INSERT will no longer work properly for that column. This is true for all fields except the primary key field. It always INSERTs correctly. I tried adding only some columns to the set of existing form fields. In that case, the INSERT operation added the correct values for the fields that were not listed in the existing records section, but failed for the others.
I am using the INSERT INTO syntax for that operation and the recordset .Update syntax for the edits. I tried using the recordset .AddNew/.Update syntax for the insert, but it exhibited the same problems. The column data types contain smallint, bit, nvarchar, and ntext types.
I know that the correct values are being put into the INSERT statement. I also tried renaming the INSERT form fields to be totally different than the names of the existing record fields. But the problem comes back no matter what.
If necessary, I can split the logic so that inserts and updates are handled by different pages. But I would like to make this work if possible. If a reader knows why SQL Server is causing this problem, any help would be greatly appreciated.
I have a query that I'm stumped on. The data has about 6000 records, of which about 460 of those have distinct dealer names and ids.
I am trying to condense this data so that there is only one record for each dealer, but my 3rd column has different values which is why some dealers have only 2 records, and others may have 10.
I know how to select distinct values, but what I want is to return a list of comma separated values for my 3rd column which consists of all the unique values from that 3rd column for that dealer.
For instance, say I have a dealer with 8 records. They have a unique ID and Dealer Name, but the 8 records appear because the dealer has 8 entries for its activity. The activities may or may not be unique.
So for example I have dealer ABC who has an id of 54, their name is ABC, but for their activites they have 8 entries (apple, orange, banana, pear, apple, banana, mango, peach).
I wnt to be able to select the distinct id, name, and distinct activities so that when my query is returned and displayed the record appears as such:
"54","ABC","apple, orange, banana, pear, mango, peach"
Does that make sense?
question need help
how can i use this code below not for insert
i need it for update another table but only if exist
the link to the code in this FORUM
http://forums.microsoft.com/MSDN/AddPost.aspx?PostID=3208536&SiteID=1&Quote=True
Adam Haines wrote:
GPS,
Since you have such a dependency on dates and date calculations, you should implement a calendar table. A calendar table will make calculation such as this much more simplistic.
Calendar table link http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-calendar-table.html.
Note the calendar table I use is a little different than this one. The only thing you will need to change is isodate to dt.
Now the code to get the results you need:
Code Snippet
declare @t table(
id int,
fname char(4),
Start_Date datetime,
End_Date datetime,
val_holiday int
)
insert into @t values (111, 'aaaa', '3/15/2008', '03/21/2008', 1 )
insert into @t values (222, 'bbbb', '05/2/2008', '05/9/2008', 3)
insert into @t values (333, 'cccc', '04/3/2008', '05/15/2008', 4)
insert into @t values (333, 'cccc', '04/29/2008', '07/07/2008', 1 )
select id, fname, cal.ISODate, val_holiday
from @t t1
inner join Calendar cal
on cal.isodate >= t1.start_date and
cal.ISODate <= t1.end_date
is possible to do it
TNX
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
View 3 Replies View RelatedWe have control table which will be useful whether we need to start the job or not. If we are starting the Job we will make it to 1.
Below is the Table Structure.
Table Name IN_USE_FG
CUST_D 0
PROD_D 0
GEO_D 0
DATE_D 0
Now we have different packages for 4 tables data loading. These 4 packages will start at a time. Before going to load the data we have to make the Flag to 1 and after that we have to load it. Because of this we have written Update statement to update the Value to 1 in respective Package.
Now we are getting dead lock because we are using same table at a same time. Because we are updating different records.
Does some know of an easy to understand way to encrypt a single table column? I have never worked with encryption before.
View 1 Replies View Relatednumbers 2 4 2Above is an example of my table with a single column. My problem is how to add all the numbers in that column to make it 8? The rows are also dynamic. Your help is highly appreciated.
View 4 Replies View RelatedI am looking a script which allow me add single coilumn to multiple table of my database.
For Example :-
I am having 4 table
1-Emp , 2-Dept , 3-Location , 4-Salary like this I have around 100 of table
Now I want to run below command to add column Rowchecksum in all table where table name start with Archivebbx keywords.
Alter table EMP
Add Rowchecksum varbinary(8000)
I have come up with one scenarios where I have three table like Product, Services and Subscription. I have to create one table say Bundle where I can have some of the product id , service id and Subscription id , i.e. a bundle may contains sum prduct , services and subscription . How I can design these relations ?
View 3 Replies View RelatedHi,
I have a table called geofence. It has a primary key geofence_id. Each geofence consists of a set of latitudes and latitudes.
So I defined two columns latitude and longitude and their type is varchar. I want to store all latitude/longitude values as a comma separated values in latitude/longitude columns
So in general how do people implement these types of requirements in relational databases?
--Subba
Hi Gurus,
I have a table having sales records and there are more than one record per one customer. The sales table has a reference number like below.
CustomerID
Sales_Ref
2
H_1123
2
H_2344
2
H_4322
I need to do a query and generate the following query.
CustomerID Ref
2 H_1123,H_2344,H_4322
Could someone help me on this.
Thanks.
Cheers,
Vijay
We run std 2008 r2. I haven't looked at my friend's function closely yet bur he showed me that when he selects from the function with one column and the same where clause he uses on same func with select *, he gets no data under the column he requested.
But when he selects * he gets a single row.
I took a peek and see a bunch of left joins followed by a bunch of outer applies in his func. I suppose (thinking out load) if anything random like the order of rows returned or sql decisions on how query runs can affect his function, that might explain it.
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
If a Select is done on a column whose data type is nvarchar(16) and contains only numerals (UPC numbers) the select does not return the record.
1. Query with numerals in nvarchar column works as long as multiple records are returned (LIKE '012%')
2. Numeric (INT only one tested) columns works as expected
3. String columns with alpha data works as expected
4. Problem only exist when running in Device Emulator and/or actual device.
5. Same test on desktop app runs as expected.
6. Windows Mobile 6, Vista Ultimate
7. Same results when when connection to device from SSMS
8. SQL Servers comes on
Previous thread discussion of this problem (I thought that Parameters corrected problem, but not in all cases???)
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.sqlserver.ce&mid=0cd9cd3a-f9b0-477f-b1e7-c27eb76158ae
Here is the complete code:
SqlCeConnection _conn = null;
_conn = new SqlCeConnection(@"Data Source=program FilesTestResultSetevsoft.sdf;");
_conn.Open();
// DOES NOT WORK *** This statement does not return the record (it exist)
string _sql = "SELECT * FROM Product where RegDescr='0123456' ";
// works correctly
string _sql = "SELECT * FROM PRODUCT where ProdNum = 6523 ";
// works correctly *** as long as multiple records are returned
string _sql = "SELECT * FROM PRODUCT where RegDescr LIKE '01%' ";
// works correctly
string _sql = "SELECT * FROM PRODUCT where RegDescr='BACARDI SILVER RAZZ'";
SqlCeCommand _cmd = _conn.CreateCommand();
SqlCeDataReader _rdr;
_cmd.CommandText = _sql;
_cmd.CommandType = CommandType.Text;
// Same results using ExecuteResultSet or ExecuteReader
//_rdr = _cmd.ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);
_rdr = _cmd.ExecuteReader();
listBox1.Items.Add("In the while loop");
while (_rdr.Read())
{
listBox1.Items.Add(_rdr.GetValue(1) + " / " + _rdr.GetValue(3));
}
listBox1.Items.Add("Done");
Here is the sample data
nType dCDServerTime
02006-05-12 03:50:46.770
12006-05-12 04:00:59.153
962006-05-12 04:01:23.827
962006-05-12 04:16:01.297
142006-05-15 05:02:46.857
202006-06-23 03:23:36.970
I am trying to find the time diff between dCDServerTime of the "first" ntype = 1 and the "first" ntype = 96. There can be any number of rows with 1 and 96 but rows with 1 always come before those with 96.
I tried by putting a subset of the above result into a table variable but don't seem to get ahead without declaring more variables.
declare @t table
(Type int, ServerTime datetime)
insert into @t
select top 1 nType,dCDServerTime from tblEvent
where nGlobalCaseID = 11901643 and nType = 1
UNION
select top 1 nType,dCDServerTime from tblEvent
where nGlobalCaseID = 11901643 and nType = 96
select * from @t
Is it possible to do it with a single select?