Hi,
Does anyone know if it is possible to specify the size of a document map in a report? Ot it's scroll bar?
I have a report that contains about 100+ groups and therefore 100+ items in the document map. On initial display of the report, about 25 groups are visible in the document map, and you can see that there is more data below (half a row is shown) but the scroll bar does not allow scrolling all the way to the bottom of the list.
Thanks.
Hello,
How can I delete the file(sql text document)? When I tired to delete the file, the message is displayed 'There has been a sharing violation. The source or destination file may be in use.'
Kind Regards
Out of Memory when working with big XML Files:when validating XSD it process small files but when size close to 1gb it throws .I have 16 xml files out of which 8-10 Â files size will be around 1gb processing one by one in FOR EACH LOOP container in SSIS[XML Task] Error: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".Task XSD Validation failed.
system configuration :
processor:Intel(R) Xeon (R) CPU E5-2670 v2 @2.50GhZ 2.50 Hz
Installed memory (RAM): 61 GB
System type: 64 -Bit operating System
Visual studio:2012,32 bitÂ
virtual memory : 12499 MB
whether the size of the XML Document a limitation for the validation task ? or any system configuration i need to improve?
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies View RelatedI have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies View RelatedI want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
View 4 Replies View RelatedThe Tabular model is showing 19 GB on disk, but it is acquiring around 40 GB in memory.
View 3 Replies View RelatedHi All ,
I have a matrix table which has two groups in the columns
I am trying to create a multileveled document map which i have succeed by
1. Edit Group 1 properties and setting the document map properties to the name of the field
2. Edit Group 2 properties and setting the document map properties to the name of this field and making the parent group the name of Group 1
The document map appears with the correct groups and name , however when I click on the values it doesnt take me to any where !!! It refreshes the screen but it doesnt go anywhere !
Can someone please help me troubleshoot this or know what i may be missing
thanks
When i publish a report to our reporting services site, it comes with a document map that I cannot seem to get rid of and is really annoyong to users. How do I stop this from happening and appearing?
View 1 Replies View RelatedIs there has some standalone help file about sql ce except the Sqlce online document or in MSDN?
View 4 Replies View RelatedI have only Management Studio Express, is there a way to document my database?
View 3 Replies View RelatedHello Everyone and thanks for your help in advance. I am developing a document storage application for an intranet that will store various Word, Excel, and PDF documents. Most of the examples I see utilize SQL Server and an image field rather than the FileSystem Object to store documents. My concern with this method is that some of the documents may be several hundred pages (not exactly sure of the actual file size yet, but they must be fairly large). My question is, where does the use of SQL Server become impractical for this type of application? Any insight would be greatly appreciated. Thanks.
View 1 Replies View RelatedHi everyone,
Has anyone seen this white paper below? If yes, can someone point me to the right direction. I can`t find it anywhere in the msdn.microsoft.com/developers. I got this info from the Winnt mag.
------
Microsoft`s Henry Lau has prepared an awesome 49-page quick reference that helps you configure SQL Server 6.5 for maximum performance and troubleshoot poor performance. Here`s the outline:
Introduction
Top Performance Items to Review for Initial SQL Server Configuration
More on Memory Tuning
Understanding the Functions of LazyWriter, Checkpoint, and Logging
Read-Ahead Manager
Disk I/O Performance
Clustered Indexes
Nonclustered Indexes
Covering Indexes
Index Selection
RAID
Creating as Much Disk I/O Parallelism as Possible
Tips for Using ShowPlan
Tips for Using Windows NT/SQL Performance Monitor
Monitoring Processors
Disk I/O Counters
Tips for Using SQLTrace
Tempdb in RAM?
Deadlocking
Join Order Importance
SQL to Avoid If at All Possible
Use ShowPlan to Detect Queries That Are Not Using Indexes
Smart Normalization
A Special Disk I/O Tuning Scenario: EMC Symmetrix
Some General Tips for Performance Tuning SQL Server
References
Download this gem from msdn.microsoft.com/developer
I have a database which stores documents (e.g. policies and guidelines)in our content management system. The follow relationships exist:Documents (1-to-Many) LinkTableKeywordLink (Many-to-1) KeywordsDocuments (1-to-Many) LinkTableAttachments (Many-to-1) AttachmentsDocuments (1-to-Many) LookUpSubjectsDocuments (1-to-Many) LookUpDocTypeWhen the user conducts a search I want the SQL to check if the stringthey enter is present in:* the Title, Author, Summary fields of Documents OR* the Title or Path of the Attachments* the Keywords that are links OR* the Subject that is linked OR* the DocType that is linked.Is this possible in one SQL query. I have tried the following:SELECT DISTINCT Documents.Document, Documents.Title,PriorityFROM Documents,Attachments,Keywords,LinkTableAttachments,LinkTabl eKeywordLinkWHERE((Documents.Document=LinkTableAttachments.Document ID andLinkTableAttachments.AttachmentID=Attachments.Id) OR(Documents.Document=LinkTableKeywordLink.DocumentI D andLinkTableKeywordLink.KeywordID=Keywords.Id))AND (Documents.Title Like '%SEARCHSTRING%' OR Documents.Author Like'%SEARCHSTRING%' OR Documents.Summary Like '%SEARCHSTRING%' ORKeywords.Keyword Like '%SEARCHSTRING%' OR DocType.DocType Like'%SEARCHSTRING%' OR Attachments.AttachmentTitle Like '%SEARCHSTRING%'OR Attachments.Path like '%SEARCHSTRING%' or Subjects.Subject Like'%SEARCHSTRING%')AND StartDate<=getDate() and ReviewDate>getDate() order by Titlebut this causes, perhaps understandably, a timeout error.Any thoughts?Thanks!Steve
View 4 Replies View RelatedHi,I need deep knowledge about DTS tasks. Can anyone send me an e-book orrelated document about DTS packages. (Links on the Internet site aregenerally advertisement or not working links).Thanks,Veysel Can Demir
View 3 Replies View RelatedI have a Report that has a document map Label in the Report which I need to remove.
However as the report has over 50 text-boxes I am having difficulty locating it.
I have had a look at the XML but that does not seem to indicate the offending text box.
Any advice would be greatly appreciated.
Regards
JohnJames
When you use the Jump to Report feature is there a way to also go to a specific document map link?
View 5 Replies View RelatedAll,
I have a report with a document map and when I run the report through
IE 7.0, the Document Map is blank. Running that same report through IE
6.0 and it is fine.
Both instances are run against the same server via Report Viewer so
there is no difference other than the client IE version.
Anyone know of a work around for this?
Thanks,
Sherry
Besides reports we also have some documents that have been uploaded to Report Manager. Is there a way that we could set a subscription for a document? I currently do not see one.
View 4 Replies View RelatedDoes anyone know if it is possible to control the formatting of the Document Map in SSRS? I would like to set the background color if possible.
View 5 Replies View RelatedThe contents of document maps do not appear since I upgraded to IE7. They still appear for users on IE6.
Reporting Services version is SQL2000.
Have looked all over - this problem has been reported in a number of places but there seems to be no response / fix / work-around from MS.
Can anyone help or at least comment?
I add document map to my report but I forgot
how can I remove it
thanks!
Where can I download MS SQL help document? Thanks!
View 2 Replies View RelatedHi ,I would like to whether its possible or not.I have stored word document(Resume) in SQL server. Now i want to search for particular key word.for example . I want to list down all details of candidate which have ASP.Net mentioned in their resume. So please provide me any link / or article .
View 1 Replies View RelatedWe are facing an issue while creating a word document through BCP utility of MS SQL Server 2005.
Ours is the Survey application where there could be various Respondents with different languages who can receive a Questionnaire through mail. Now the requirement is to send the Questionnaire in Word Document which would look like a form having Radio buttons, check boxes and images etc. controls.
To achieve this we have written a Stored procudure in MS SQL Server 2005. In this Stored procedure, we are writing an HTML Code in formatted manner and at the end using BCP utility we create a word document in specific folder. Then we attach the document from that folder in mail using sp_sendmail of MS SQL server 2005 and send it to the Respondent of the Survey.
1> The issue we are facing here is when the Respondent receives the mail and opens the word attachment, it opens the document in designer mode where controls(Radio Button and check boxes) are not clickable. Hence Respondent is not able to fill in the document as a form. However Respondent has to click on 'Exit Designer' button in the menu to make it as interactive form. The requirement is when Respondent opens the Word document it should directly open as Interactive form rather that clicking on 'Exit Desinger' button on menu.
2> Secondly when we create a word document, there are some images that need to be shown as seen below. As of now, in HTML code we have given a path of the Web Server as '<http:WebServerIP/images'. However we would like to know whether there is any way to Embed the images directly in the Word Document rather than referancing them from the Web server path.
I am interested in storing millions of documents in a database. It appears that Oracle has a better selection of document management tools including a search engine than does SQL 7.
Any comments, suggestions, reviews, and/or white papers regarding this issue would be greatly appreciated.
Regards,
Steve Marsh
I am trying to save an MS WORD document... What Data type should I use?
I know in Sybase we used BLOB...
I have a client that would like to archive all of the documents .word, .xls, .pdf, .jpg, email coorespondance, etc. into some sort of database so in the near future when the project starts up again all of the information is in a clear consise format. I was hoping that this forum could provide some guidance in selecting a software package and a discussion on how to proceed.
I have 6 gigs of documents in a folder on our server.
I was planning on delivering the organized data on a external hard drive after putting the data into some sort of database.
I would like to include metadata about each particular document.
like
who created the document,
Key words about the document's purpose,
time frame the document is revelant for,
and so on.
I would like to use a database structure and possibly hot link the document to the DB.
I would like to use xml (if possible) for the metadata.
any help is greatly appreciated on this
I can be reached at
khively at maximusa dot com
for any additional questions