Hi,
I have encountered a query which takes lots of temp tablespace and it fails later.
Initially the temp tablespace was 28GB, we made it to 56 GB but still it fails.
There is just this single process that is running on database.
I tried putting index on the table in query ,but no help.
Can suggest a solution to get size of temp space required or reduce its usage?
I am trying to insert 2 fields of about 9 million records into a table and i keep getting this message
Server: Msg 1101, Level 17, State 10, Line 1
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
Server: Msg 1101, Level 17, State 1, Line 1
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
I have unrestricted file growth and over 200 mb of space left, what else can i do?
Sort failed: Out of space or locks in database 'tempdb' (Message 1510)
I ran a store procedure to populate one table . The total tables I am pulling information from are 6 tables. I am sure of the relationships between those tables, yet the error shown on top occured. I have increase the locks before and I assume the cause is temp db. Any suggestions to avoid out of space in tempdb?
thanks for help
Ali
I have a stored proc that processes large amounts of data. I have used temp tables in this stored proc. After I drop these temp tables, it doesn't release the disc space and my hard drive runs out of space before the process ends. When I stop the sql service and restarts it, it releases the disc space. How can I force the release of disc space inside of my stored procedure?
View 6 Replies View RelatedI've written a SP which does some complex calculations and in the enddumps data into 2 tables (master & detail) When I run this sp forsmaller no of IDS (employees i.e for 13000 in Master and 60000 recordsin detail table) it takes around 3-4 hrs and if I run for allemployees in the database (i.e. abt 60000 records in master and 180000records in detail table) then it takes around 10hrs to complete.I'm using temp table to hold data and then do the calculations, butsometimes when I run the SP temp db starts growing and reaches up to25 GB and the process fails as there is no space left on the disk, andlately I'm not able to run the SP for every employee, I had to end theprocess after 16 hrsIf anybody can guide me what could be posible resons or where I shouldlook for solution.My row size in master table is arounnd 2000 bytes and in detail tableabt 300 bytes.Thanks in advance.Subodh
View 3 Replies View RelatedI could not figure out, if this is a feature.
I set TempDB to autogrow, it accepts it but when I go back to it it is showing as fixed growth or max. size as 2GB.
Has anybody encountered that ?
We are planning hardware purchases (more is better). One of our databases is 131 gigs in size and has 45 gigs of 'space available'. I'm not a very experienced SQL Server person, but this seems like quite a bit of 'space available'
1) Is there a way to regulate the amount of 'space available'?
2) are there any rules of thumb for how 'space available' there should be?
Appreciate any feedback or help.
Ray
I'm trying to determine how much space some tables use (SQL2000), and I found 2 suggestions posted earlier, but can't get them to work for me.
The first was
"Right click on the DB in Enterprise Manager, select view then taskpad."
When I try that, I get some of the tables displayed with the info I want, but I can't see them all and can't scroll down beyond the first 22 tables in the database.
The second suggestion:
exec sp_msforeachtable @command1="print '?'",@command2="sp_spaceused '?'"
It says "command copleted successfully, but where does the output to this go ?? Is there something other than "print" I should use ?
The grid pane is empty.
Hi
I am using DTS to transfer tables from Oracle 9i to SQL Server 2000 sitting in a shared environment and managed to migrate
a lot of tables without glitch..
When I was migration a table <XYZ> from Oracle to SQL Server..The table was created in the SQL Server whilst the DTS threw an error that read when it was copying data and 0 rows were copied with the error message being
"Cannot create a row of size 8387 which is greater than the allowed maximum of 8060"
Incidentally the have a table in the Oracle DB that has 152 Rows of Data with 94 Columns..
Does any change needs do be done on the Admin side of the SQL Server to resolve this problem and faciliate effective transfer of data from the DB's?
Thanks in Advance
KI
Hi
I am using DTS to transfer tables from Oracle 9i to SQL Server 2000 sitting in a shared environment and managed to migrate
a lot of tables without glitch..
When I was migration a table <XYZ> from Oracle to SQL Server..The table was created in the SQL Server whilst the DTS threw an error that read when it was copying data and 0 rows were copied with the error message being
"Cannot create a row of size 8387 which is greater than the allowed maximum of 8060"
Incidentally the have a table in the Oracle DB that has 152 Rows of Data with 94 Columns..
Does any change needs do be done on the Admin side of the SQL Server to resolve this problem and faciliate effective transfer of data from the DB's?
Sorry Had I started this topic in the wrong forum.
Thanks in Advance
KI
For finding size values of temp database:
select * from sys.master_files -
size column value here is 1024 for .mdf,size here for .ldf is 64
select * from tempdb.sys.database_files -
size column value here is 3576 for .mdf,size here for .ldf is 224
Why is there a difference and not the same. size columns in the above 2 tables for temp db's do they represent different values ?
I have seen a bunch of ways to get the size of all the tables within a database posted on this board. I decided to modify an older one I found here (http://www.sqlteam.com/item.asp?ItemID=282). I set it up so there is no cursors or temp tables. Pretty much just one select statement to return all the info you would need. It seems to be faster than anything I have seen so far. Take it for whats its worth. Thanks to the original creator.
/*
Original by: Bill Graziano (SQLTeam.com)
Modified by: Eric Stephani (www.mio.uwosh.edu/stephe40)
*/
declare @low int
select @low = low from
master.dbo.spt_values
where number = 1 and type = 'E'
select o.id, o.name, ro.rowcnt, (r.reserved * @low)/1024 as reserved,
(d.data * @low)/1024 as data, ((i.used-d.data) * @low)/1024 as indexp,
((r.reserved-d.data-(i.used-d.data)) * @low)/1024 as unused
from
sysobjects o
inner join
(select distinct id, rowcnt
from sysindexes
where keys is not null and first != 0) ro on o.id = ro.id
inner join
(select id, sum(reserved) reserved
from sysindexes
where indid in (0, 1, 255)
group by id) r on o.id = r.id
inner join
(select c.id, dpages+isnull(used, 0) data from
(select id, sum(dpages) dpages
from sysindexes
where indid < 2
group by id) c full outer join
(select id, isnull(sum(used), 0) used
from sysindexes
where indid = 255
group by id) t on c.id = t.id) d on r.id = d.id
inner join
(select id, sum(used) used
from sysindexes
where indid in (0, 1, 255)
group by id) i on d.id = i.id
where o.xtype = 'U'
order by reserved desc
How to find rowcount and size(space used) for all tables in a db? Can any one give me the script please?
Thanks,
We can know easily a database disk size, but can we konw a table in SQL 2005 database possess size? and more, how can I know the records in SQL 2005 Table possess size space?
View 8 Replies View RelatedHi,
I was running out of space and thus deleted some rows from a table. To my surprise the db size increased. I then shrunk it to bring it back to what it was earlier.
When i deleted some 5000 rows, some space must have been released. Where did the space go and why did the db size increase after deleting the records?
I thght it might be log files..but db is set to Simple Recovery which does not utilize a Log File.
Any reasons?
What is the easiest way to calculate the space (size in bytes) used by a BLOB column that is already stored in a particular row?
Thanks.
While i execute dbcc sqlperf(logspace); I get following values.
Database NameLog Size (MB)Log Space Used (%)
master 16.17969 13.30275
tempdb 7.429688 61.7245
model 0.7421875 45.78947
msdb 5.554688 25.87904
distribution 2808.93 0.8172179
BANKDB 23438.87 48.20037
WSMIRSDB 109.7422 4.839111
For database BANKDB , Log Space used(%) is 48.83% and Log size is about 23438.87 where as my database size of BANKDB is 60 GB. FULL database and Log back is done every day night one time. My database is performing slow now.
Do we need to take log backup frequently like once a 1 hour so that Log space used will be less. Same query is taking more time to execute than before in same database is it because of log file has increased.
I do index organize and rebuild once a week and stats apply nightly.
Is it correct once log space size is increasing more than 10%. Do we need to take log backup?
I executed the below query and getting the capacity values only for master database.All other DB shows NULL values for spaceused. I'm actually looking for a query to get all the capacity information other than using temp table and the procedures. Is there any way using SQL query ONLY.
select
db.[dbid] as 'DB ID',
db.[name] as 'Database Name',
af.[name] as 'Logical Name',
convert(decimal(12,2),round(size/128.000,2)) as FileSizeMB,Â
convert(decimal(12,2),round(fileproperty(db.name,'SpaceUsed')/128.000,2)) as SpaceUsedMB
from sys.sysdatabases db
inner join sys.sysaltfiles af
on db.dbid = af.dbid
Below is the output
DB ID Database Name
Logical Name FileSizeMB
SpaceUsedMB
1 master
master 4.00
3.44
1 master
mastlog 2.00
[Code] ....
I have 10 Gb index and disk space only left 5gb .
How can i rebuild index ?
I am using sql server 2008 r2 on my end. I have created a database named testDB. I have a lot of tables with some log tables in this. some tables have contain lack of records in log table.
So my purpose is that I want to fix the table size of those tables(log tables) and want to move records in other database table placed on another location. So my database has no problem.
is there any way to make such above steps which I want for my database?
Is there already built any such functionality in sql server?
-- Initialize Control Mechanism
DECLARE@Drive TINYINT,
@SQL VARCHAR(100)
SET@Drive = 97
-- Setup Staging Area
DECLARE@Drives TABLE
(
Drive CHAR(1),
Info VARCHAR(80)
)
WHILE @Drive <= 122
BEGIN
SET@SQL = 'EXEC XP_CMDSHELL ''fsutil volume diskfree ' + CHAR(@Drive) + ':'''
INSERT@Drives
(
Info
)
EXEC(@SQL)
UPDATE@Drives
SETDrive = CHAR(@Drive)
WHEREDrive IS NULL
SET@Drive = @Drive + 1
END
-- Show the expected output
SELECTDrive,
SUM(CASE WHEN Info LIKE 'Total # of bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS TotalBytes,
SUM(CASE WHEN Info LIKE 'Total # of free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS FreeBytes,
SUM(CASE WHEN Info LIKE 'Total # of avail free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS AvailFreeBytes
FROM(
SELECTDrive,
Info
FROM@Drives
WHEREInfo LIKE 'Total # of %'
) AS d
GROUP BYDrive
ORDER BYDrive
E 12°55'05.25"
N 56°04'39.16"
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
Hi all,
Looking at BOL for temp tables help, I discover that a local temp table (I want to only have life within my stored proc) SHOULD be visible to all (child) stored procs called by the papa stored proc.
However, the following code works just peachy when I use a GLOBAL temp table (i.e., ##MyTempTbl) but fails when I use a local temp table (i.e., #MyTempTable). Through trial and error, and careful weeding efforts, I know that the error I get on the local version is coming from the xp_sendmail call. The error I get is: ODBC error 208 (42S02) Invalid object name '#MyTempTbl'.
Here is the code that works:SET NOCOUNT ON
CREATE TABLE ##MyTempTbl (SeqNo int identity, MyWords varchar(1000))
INSERT ##MyTempTbl values ('Put your long message here.')
INSERT ##MyTempTbl values ('Put your second long message here.')
INSERT ##MyTempTbl values ('put your really, really LONG message (yeah, every guy says his message is the longest...whatever!')
DECLARE @cmd varchar(256)
DECLARE @LargestEventSize int
DECLARE @Width int, @Msg varchar(128)
SELECT @LargestEventSize = Max(Len(MyWords))
FROM ##MyTempTbl
SET @cmd = 'SELECT Cast(MyWords AS varchar(' +
CONVERT(varchar(5), @LargestEventSize) +
')) FROM ##MyTempTbl order by SeqNo'
SET @Width = @LargestEventSize + 1
SET @Msg = 'Here is the junk you asked about' + CHAR(13) + '----------------------------'
EXECUTE Master.dbo.xp_sendmail
'YoMama@WhoKnows.com',
@query = @cmd,
@no_header= 'TRUE',
@width = @Width,
@dbuse = 'MyDB',
@subject='none of your darn business',
@message= @Msg
DROP TABLE ##MyTempTbl
The only thing I change to make it fail is the table name, change it from ##MyTempTbl to #MyTempTbl, and it dashes the email hopes of the stored procedure upon the jagged rocks of electronic despair.
Any insight anyone? Or is BOL just full of...well..."stuff"?
I am transferring data from oracle and getting below error message.
I using 4 data flow tasks with in a single control flow and all the 4 tasks quueries same table but populates data in to different sql tables based on the where contidion
[OLE DB Source 1 [853]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "ORA-01652: unable to extend temp segment by 64 in tablespace TEMP ".
Hi,
I am trying to do this:
UPDATE Users SET uniqueurl = replaceAllEmptySpacesInUniqueURL('uniqueurl')
What would be the syntax.
Any help appreciated.
Thanks
I am generating a Report from Sql Data Source in Sql Server 2005 and viewing the Report in Report viewer control of Visual Studio 2005.
The data in the Data Source contains string with multiple spaces (for example €œ Test String €œ) but when they get rendered in Report viewer control, multiple spaces gets converted to single space €? Test String €œ.
I tried following solutions
1) Replacing spaces with €œ €?
2) Inserting <pre> tag before the string and </pre> tag after the string (Also tried <Pre> instead of <pre>)
But in all the cases result is same. The Report Viewer control is showing €œ €? instead of space and €œ<Pre>€? tag instead of preserving spaces.
Please provide me a solution so that spaces can be preserved in Report Viewer.
I am using the below script to get space alerts  and now i am interested in sending alerts  if for any drive space available is Less than 10% or 15%.. how to convert beelow code to find in %Â
Declare @Drives Varchar(20)
DECLARE @Spaces Varchar(50)
DECLARE @availableSpace FLOAT
DECLARE @alertMessage Varchar(4000)
DECLARE @RecipientsList  VARCHAR(4000);
CREATE TABLE #tbldiskSpace
[Code] ....
Hi.. I was doing a good maintenance on my DB and my trans log LDF keep growing until 30GB but my DB data file MDF is only 2GB. I found the two following method to reduce my log size.
Method 1: I used veritas to backup log file with truncate
Method 2: I used the shrink database option in Enterprises manager to shrink it (file chosen=log , use default option)
After doing that, I found my LDF log file is still about the same size=27GB but when I see clearly, from the shrink database windows, the log spaced used reduced to only 100MB, the allocation log space is still 27GB. Why? How to make the LDF smaller to be the around the same size as the space used 100MB?
This is driving me bananas. Can't find any info on this anywhere....SQL 2000 seems to replace double space with a single space when I seta varchar field to " " (2spaces), it only stores " " (1space). Whyon earth would microsoft do this? If I save 2 spaces - I WANT TO SEE2 SPACES!!!!Can anyone help? Is this a database setting? Is this due to usingvarchar?Any help appreciated.Colin Hale
View 2 Replies View RelatedHello,
Somebody know how to reduce the space allocated for the transaction log space for my SQL_DB ?
3700 MB allocated but only 100 MB used and 3600 MB are free !
Transaction log properties :
Automatically grow file are filled
file growth by percent = 5%
maximum file size - restrict filegrowth = 3700 MB (we can't reduce it !)
Thank you for your precious help !
Khaix from Brussel.
How do we suppress multiple spaces to a single space in T-SQL
E.G.
Field: FullName
e.g.
WOMENS HEALTH RIVER VALLEY
JOHN FAMILY MED GROUP
HERSH STWEART P.
PARK HEIGHTS MEDICAL CENTER
KOPP WHITEFIELD E
The o/p wanted is
HERSH STWEART P.
Thank you.
I have an application that I am working on that uses some small temptables. I am considering moving them to Table Variables - Would thisbe a performance enhancement?Some background information: The system I am working on has numeroustables but for this exercise there are only three that really matter.Claim, Transaction and Parties.A Claim can have 0 or more transactions.A Claim can have 1 or more parties.A Transaction can have 1 or more parties.A party can have 1 or more claim.A party can have 1 or more transactions. Parties are really many tomany back to Claim and transaction tables.I have three stored procsinsertClaiminsertTransactioninsertPartiesFrom an xml point of view the data looks like this<claim><parties><info />insertClaim takes 3 sets of paramters - All the claim levelinformation (as individual parameters), All the parties on a claim (asone xml parameter), All the transactions on a claim(As one xmlparameter with Parties as part of the xml)insertClaim calls insertParties and passes in the parties xml -insertParties returns a recordset of the newly inserted records.insertClaim then uses that table to join the claim to the parties. Itthen calls insertTransaction and passes the transaction xml into thatsproc.insertTransaciton then inserts the transactions in the xml, and alsocalls insertParties, passing in the XML snippet
View 2 Replies View RelatedBelow are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?