Slow DB Response After Server Reboots
Oct 31, 2007
I am working with a client that after every reboot of there SQL 2000 DB server, they experience slow response time for a couple of hours. The server has 12 GB RAM and a Dual 3.8 processor. It is believed that the slow response is due to as queries run after the reboot, they are re-building information in memory and after the memory is built up, it goes back to the normal performance utilizing the memory for speed. Is this an accurate assumption or is there something else to be looking at after the server is rebooted?
Thanks,
JB
View 3 Replies
ADVERTISEMENT
Oct 17, 2006
Hello,
I have 2 servers (say MAINSRV e SECSRV) running SQL2000 Standard SP3 on Windows 2000 Advanced within a NT (!) domain and each server is linked to the other.
My problem is that if I run a query returning few dozens of rows like:
SELECT * FROM MAINSRV.DbName.dbo.TblName TBLA
WHERE Fieldx = 'anyval'
from a client connected to the SECSRV server, it takes something like 35 minutes to complete, while the same query completes in no time when run on clients connected to MAINSRV.
Even the simplest SELECT Count(*) FROM... takes more than one minute from SECSRV while completing in a fraction of second from MAINSRV.
I tried to change the linked server security options (SQL/Windows), but the remote query remains slow.
There are no locks active on the table, both the servers have almost no load (CPU less than 10%, when tested) and the query returns just a few KBytes, so communication overhead will not be the problem.
Any suggestions will be very appreciated, thank you!!!
View 2 Replies
View Related
May 14, 2008
When I launch Outlook, it takes forever for the program to finally open. With any inbound email, it stops processing whatever is underway at the time....and frequently there is a 2-3 second lag between keyboard input and what appears on the screen. SQLserver is usually consuming upwards of 1-gb of memory....help. Mike
View 1 Replies
View Related
Aug 21, 1998
Hi
I have Problem, My response time is too Low. Is Any one Know how to improve my response time. My DATABASE SIZE IS 11 GB. I didn’t change any configuration parameter after installing SQL Server. Right my server Having default configuration parameters. Whether I have to change any parameters or not. My queries will generate lot of temporary tables.
Thanks
JK
View 2 Replies
View Related
Aug 10, 1998
At my location we are running Great Plains on SQL server with the Great Plains client on the front end communicating over IP Sockets. Occasionally the client will stop responding for up to 15 minutes. This occurs to all clients at the same time. While this is happening I have ran performance monitor on the SQL server using the SQL counters and everything looks fine. Performance on the server and the network does not degrade. Only the Great Plains client is affected. From this I feel this is not a network problem. I would like some suggestions on what could possible cause this type of problem. I am really just looking for a starting point on where the problem may be originating from. Any suggestions will be greatly appreciated.
thanks.
View 1 Replies
View Related
Feb 29, 2008
Here is the configuration we have at our site:
64 bit virtual server - Clustered 64-bit SQL Server 2005 Standard SP2 listening on port 1433.
32 bit virtual server - 32-bit application that connects to above SQL Server 2005 via standard OLEDB driver installed with windows (String utilized: Provider=SQLOLEDB.1;Persist Security Info=False;Initial Catalog=applicationdb;Data Source=ServerInstanceName).
We are experiencing a slow reponse of 45 sec to more than a minute on a simple select statement on a table having 5000 rows.
The same select statement on the Server locally in Studio returns results back in 2 seconds or less. But from Stuido on any other desktop (remote) it takes 45 secs or more. Same slow response is seen by the application which is using OLEDB.
I've looked into some of the Server parameters but didn't find any clues.
Any help is greatly appreciated.
View 2 Replies
View Related
Sep 28, 2007
hi,
I ran into a situation that if I don't use sql server for a while, in MS SQL Server Management Studio, when I run some query again, it takes a long time to respond. I looked into it with Activity Monitor, seems like the query was waiting for something, in the process view tab, it shows that:
WaitType: LATCH_EX
Resource: LOG_MANAGER(112F88C8)
What is the latch-ex? What should I check next to find out the problem?
Thanks.
View 4 Replies
View Related
Mar 16, 2006
Hi all,
I have a website www.searchcontracts.com which has a search feature on the front page. The problem is that whenever a search is submitted (without and filters) it processes extremely slow (if at all, sometime throws 'general network' errors). If working properly it will return about 500+ records. As far as i know if there should be no issues returning a recordset of this size. I have the site hosted in a shared environment and it uses a SQL2000 db. If you filter the search resutls, it's more reponsive (still fairly slow).
If you believe that the hosting server i'm using should be upgraded, what would be the best solution? Keep in mind that i want to be able to return way more than 500+ records in one go.
Thanks
Jakehttp://www.searchcontracts.comhttp://www.custommethod.comhttp://www.boozetour.com
View 3 Replies
View Related
Feb 10, 2000
We did an in place convertion of our data base from MS SQL Server 6.5 to 7.0.
Our application is much slower now on SQL 7.0. Any idea why?
The following is a sample SQL statement that runs quickly on SQL 6.5 and takes a long time on SQL 7.0 I also attached the query plans from SQL 6.5 and 7.0.
SELECT Person_Name.PerNam_Person_Name_PK ,
Person_Name.PerNam_Row_Status ,
Person_Name.PerNam_Last_Name_Sndx ,
Person_Name.PerNam_Last_Name ,
Person_Name.PerNam_Name_Suffix ,
Person_Name.PerNam_First_Name ,
Person_Name.PerNam_Name_Prefix ,
Person_Name.PerNam_Middle_Name ,
Person_Name.PerNam_Event_Person_FK ,
Event.Evn_Event_Nbr ,
Event.Evn_Event_Type ,
Event_Person.EvnPer_Last_Name ,
Event_Person.EvnPer_First_Name ,
Event_Person.EvnPer_Middle_Name ,
Event_Person.EvnPer_Name_Prefix ,
Event_Person.EvnPer_Name_Suffix
FROM Person_Name , Event , Event_Person
WHERE (Person_Name.PerNam_Agency_ID = "CL")
AND ( Person_Name.PerNam_Event_Person_FK = Event_Person.EvnPer_Event_Person_PK )
and ( Event_Person.EvnPer_Event_FK = Event.Evn_Event_PK )
and (Person_Name.PerNam_Person_Name_PK = 0 or ( Person_Name.PerNam_Event_Person_FK = 581541) )
and ( Person_Name.PerNam_Row_Status <> "D" )
Query plan in SQL 6.5
SQL Server Execution Times:
cpu time = 0 ms. elapsed time = 31250 ms.
STEP 1
The type of query is INSERT
The update mode is direct
Worktable created for REFORMATTING
FROM TABLE
Person_Name
Nested iteration
Index : PK_Person_Name
FROM TABLE
Person_Name
Nested iteration
Index : PerNam_Event_Person_FK
FROM TABLE
Person_Name
Nested iteration
Using Dynamic Index
FROM TABLE
Event_Person
Nested iteration
Index : PK_Event_Person
TO TABLE
Worktable 1
STEP 2
The type of query is SELECT
FROM TABLE
Worktable 1
Nested iteration
Table Scan
FROM TABLE
Event
Nested iteration
Index : PK_Event
SQL Server Parse and Compile Time:
cpu time = 0 ms.
Table: Person_Name scan count 2, logical reads: 6, physical reads: 5, read ahead reads: 0
Table: Event scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0
Table: Event_Person scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0
Table: Worktable scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0
Table: Worktable scan count 1, logical reads: 1, physical reads: 0, read ahead reads: 0
SQL Server Execution Times:
cpu time = 0 ms. elapsed time = 62 ms.
Query plan on SQL 7.0
SQL Server parse and compile time:
CPU time = 431 ms, elapsed time = 535 ms.
.................
Table 'Event'. Scan count 1, logical reads 3, physical reads 3, read-ahead reads 0.
Table 'Event_Person'. Scan count 1, logical reads 6, physical reads 5, read-ahead reads 0.
Table 'Person_Name'. Scan count 1, logical reads 4588, physical reads 2, read-ahead reads 4092.
SQL Server Execution Times:
CPU time = 7921 ms, elapsed time = 13519 ms.
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 13781 ms.
View 2 Replies
View Related
Apr 5, 2007
Hi
i had a problem with the SSIS response time - its very slow.
When I try to open the solution and than click to open the Pakage it's take at least 6-10 minutes until it's open.
Please advice what can be the reason
10x
View 4 Replies
View Related
Oct 16, 2006
Hello.I have a slow response with a system that I am setting up. The OS isWin 2000 Server with SQL Server 2000. My first execution of the SQLprocedure is slow (about 40 seconds), while the second execution isfaster (approx. 3 seconds and what I expect).Using query analyser I can leave the window up and come back ( aftersay 10 minutes ) and my next response is will be slow (and fasterstraight after this).The query itself is the "TOP 10" rows from a table of a remote DB (MSDE2000 - NT station).This is similar to;---------------------DECLARE @SelectRowsFromRemoteDB NVARCHAR(400)SET @SelectRowsFromRemoteDB = "SELCT a.* FROM OPENROWSET('SQLOLEDB', 'Remote', ....) a"EXEC sp_executesql @SelectRowsFromRemoteDB---------------------The CPU usage goes high (with Task Manager), but oddly the task withmost usage is the "Idle Process".Please help with an answeror a good starting point to known where the resources are being used.Regards JC.....
View 2 Replies
View Related
Jun 26, 2015
Using SSMS 2012, we are experiencing extremely slow response times when opening SQL job steps to edit and also deploying SSIS Pkg's. Sysadmins have no problem. Users in the ssis_admin role have no problem. It's the rest of the users who have issues.
View 1 Replies
View Related
Apr 29, 2008
Hi,
I have a problem with querying systemjobhistory data. Response time is slow and it is vary from time to time, sometime it takes few seconds and sometime it takes more than 2 minutes. I understand that there is quite a number of jobs in DB server and which might result in slow response time.
Is it possible to shorten the response time? like using index? My application is always look like hang when the query take very long time to run.
Any help is greatly appreciated. Thank you.
Regards,
maxChin
View 4 Replies
View Related
Jul 20, 2005
Hi,I am facing one serious problem. As soon as i started the sql server firsttime after installtion, my windows 2000 machine reboots. Once the windowsmachine comes up, sql server does not get started event if i manually try tostart it.My Machine configuration is as follows:1. Windows 2000(5.00.2195 SP3) with intel 2.4 Ghz processor, having 512MBramI am using SQL server 2000 evaluation version.Event log is giving following error messages:1. The description for Event ID ( 17052 ) in Source ( MSSQLSERVER ) cannotbe found. The local computer may not have the necessary registry informationor message DLL files to display messages from a remote computer. Thefollowing information is part of the event: Error: 17822, Severity: 16,State: 1Could not load Net-Library 'SSNETLIB'..2. The description for Event ID ( 17052 ) in Source ( MSSQLSERVER ) cannotbe found. The local computer may not have the necessary registry informationor message DLL files to display messages from a remote computer. Thefollowing information is part of the event: Error: 17059, Severity: 18,State: 0Operating system error 0: The operation completed successfully...Do any one know how to fix this problem ?Thanks a lot,Dinesh
View 4 Replies
View Related
Jul 20, 2005
Hi,I am facing one more problem. As soon as i started the sql server firsttime, my windows 2000 machine reboots and i was not able to start sql serveragain. I had to uninstall and install again and this process repeats. Doanyone has idea about what is happening ??Thanks a lot,Dinesh
View 2 Replies
View Related
Nov 19, 2006
This is sort of a DR issue since it involves reboots and power failures.
We have MSSQL 2005 SP1 and unpatched systems, but in particular we have this problem still with the SP1 server (in addition to the unpatched systems). Running on Win 2k3.
It seems that upon reboot, our stored SSIS jobs lose their pemissions and/or ownership for execution. It doesn't happen at every reboot or power failure, but seemingly more than half the time.
Here is the error reported:
The job failed. The owner () of job Job_1 does not have server access.
But checking the properties of the job and it shows an valid owner in the Owner field. I believe we are using Active Directory for authentication and the user listed is valid in that respect.
We have "fixed" this problem before by removing the job completely and re-installing it, with the same owner. No issues until the next system outage.
Has anyone else seen this before? Is there a fix or is this some kind of bug?
View 5 Replies
View Related
Sep 19, 2001
We do a 4:00AM weekly reboot of every SQL 7.0 server on NT4 scheduled as a SQL Agent job using the os command "shutdown servername /l /c /y /r". The problem is some of the SQL servers recognize the NT shutdown command and gracefully exit out of SQL first with the SQL log entry "SQL Server terminating because of system shutdown", then closes all databases files. Most of the other SQL server do not list any SQL log messages and sometimes list startup error messages indicating a dirty shutdown.
Does anyone else reboot their SQL servers with a scheduled job? If so, how do you perform this task cleanly?
Thanks,
D
View 1 Replies
View Related
Oct 16, 2007
Hi,
I'm just looking into installing a second instance of SQL 2005 with SP2 on a W2K3 R2 machine that already contains a default instance, if i do so is the order of installation
1) Install named instance
2) Apply SP2 to the newly installed named instance
If i do this, will either of these require a system reboot ?
The default instance should remain operational if no reboot required as the service pack is for a specific instance in this case ?
Thanks in advance
P
View 1 Replies
View Related
Jan 17, 2008
I have a SQL Server 2000 runing for production. Recently it is frozened occasionally.
Ath the time, no response from SQL server even I use Enterprise Manager, I can not connect to the server.
So there is no way to fixed only reboot the server.
Aftrer that, I checked the error log and go the info as:
SQL Server terminating because of system shutdown.
LogEvent: Failed to report the current event. Operating system error = 31(A device attached to the system is not functioning.).
After reboot, I checked the error log again, seems no special error except:
Attempting to initialize Distributed Transaction Coordinator.
Failed to obtain TransactionDispenserInterface: Result Code = 0x8004d01b
What's the possible reason for this issue? how to figure out and slove this problem?
View 6 Replies
View Related
Nov 21, 2007
When I try to connect to a SQL server instance from Enterprise Manager, I'm getting a timout connection error. I have to change the timoeout parameter from 4 (the default) to 30 in order to work.
Also I realize that some applications (like sharepoint) are having the same problem connecting to that server.
My question is:
Why is that happening?
It used to work fine, and I'm getting this issue a couple of days ago.
Appreciate your help.
View 1 Replies
View Related
Feb 19, 2008
Hi,
I have a problem using service broker, a send the message from server SSB1(initiator) and a receive this message on server SSB2(target), but I don't receive response to SSB1...
In my server SSB2 has this messages on Profiler:
- This message could not be delivered because it is a duplicate.
- Could not forward the message because forwarding is disabled in this SQL Server instance.
- The message could not be delivered because it could not be classified. Enable broker message classification trace to see the reason for the failure.
Message from SSB1 Profiler:
- This message was dropped because it could not be dispatched on time. State: 1
And the messages not end in both servers
Tks
Fernando Bueno
View 8 Replies
View Related
May 12, 2000
Hello,
I need to know if I am able to use OLE DB connection strings without the username and password for Challenge/Response logins.
I have a web site that uses SSL and Challenge/Response to authenticate users, but my connection to the database is by embedding a generic username and password in the connection string.
I would like to leave that off and have the connection to the database use the challenge/response authentication when they first logged into the web site. This way I can control their permissions in SQL server.
I appreciate any help
Kevin
View 1 Replies
View Related
Oct 10, 2007
I have recently installed SQL 2005 client tools with SQL Server Management Studio and accessing databases on a SQL 2000 server. The response I am getting is extremely slow. Should I go back to SQL 2000 client or are there methods by which I can improve the performance.
Thanks
Sam
View 1 Replies
View Related
Apr 20, 2007
Hi,
I have two servers, one production server and one backup server which have transactional replication with a pull subscription.
When I configure replication, it works fine during our test weekends testing production load. After tests, replication looks fine for a random number of days. Then, all of a sudden, an error message is displayed on one of the agents: "The agent is suspect, no response within 10 minutes." This has happened a number o times. If I remove replication and configures it again, it always works. Sometimes it works by just updating one of the tables and the error message disappears. The last time (today) that did not work. Updating the database did not replicate and the error message remained.
Has anyone experienced this same problem and has a god solution. One thing that is common is that the error message appears after long times of inactivity on the servers, or perhaps after a restart but that I am not sure about.
Question 1: How can I prevent this error message?
Question 2: Are there any special things to think about when I need to restart the servers and replication is configured, e.g. after installing updates from Windows Update.
I would be very grateful for any answers regarding this.
Best,
/M
View 1 Replies
View Related
Dec 14, 2007
Please assist, the issue with SQL 2005 Browser and SQL 2000 Server Service is understood.
Our problem is with networked 2000 instances and SQL Express. The SQL 2000 machines (Standard & MSDE) do not have SQL 2005 or Express installed only 2000. When a SQL Express computer is put on the network with the SQL Browser service running almost all SQL 2000 machines lose sight of the other SQL 2000 instances. The second the
SQL Browser is turned off on the SQL Express box the SQL 2000 machines can see each others instances.
It appears that the response from the SQL Express SQL Browser causes the SQL 2000 machine to stop listening for responses. Once in a while one of the SQL 2000 instances will show up with the SQL Browser active on the network and it is my belief that it is because that response made it in before the SQL browser response. Please help as this does not appear to be a recognized issue. I'm assuming there aren't many sites running as many named instances on individual machines like we do.
Please note this appears to be a problem with SQL Express Browser not SQL 2005 Standard's which runs without problems on our network.
THANK YOU!
View 1 Replies
View Related
Nov 26, 2007
OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
View 1 Replies
View Related
Jan 12, 2007
Every so
often I am seeing this error in the Event Viewer on Windows 2003
Server. It related to a file that pulls documents from a SQL server db using Response.BinaryWrite. When it pulls a file of about 2MB it creates a warning in the EventViewer. I was told to look at using Response.WriteFile to pull the file instead. I found this page: http://support.microsoft.com/kb/306654 which talks about it but doesnt give an explination on how to integrate with grabbing the content. Does anyone know how to pull db content and use WriteFile and put the file into the Response. Similar to this: Response.Buffer = TrueResponse.Clear()Response.ContentType = contentTypeResponse.AddHeader("content-disposition", "attachment; filename=" + fileName)Response.BinaryWrite(content)Response.Flush()Response.End()
View 11 Replies
View Related
Jul 2, 2007
Hi,
Here is the code:Try
If DS.Tables(0).Rows.Count = 0 ThenResponse.Write("Cannot delete an unexist row!")
Response.End()
End If
DS.Tables(0).Rows(0).Delete()
Catch BUG as Exception
Response.Write(Bug.Message)
End Try
I removed all the connection stuff..
What I don't understand is why if ds.table(0).rows.count is zero I still get Bug.Message? I did Response.End ...
Thank you.
View 11 Replies
View Related
Mar 6, 2008
Regarding SSRS, what is considered a good response time? We have some reports running 2 minutes and the users think that is too long. Is there a guideline as to what a user should reasonably expect and if so, what is that guideline?
View 2 Replies
View Related
Jun 11, 2007
Hi. We are migrating a mainframe datacom database to SQL Server. One of our client-server applications already uses SQL Server. This application uses a middleware product to query and update the datacom database being migrated. We are considering using Service Broker to replace the middleware.
In many cases the client does not need a response provided the message is queued and will eventually get delivered. However, in some cases the client would like to wait for the message to be processed before proceeding. Is there an easy way to both submit and optionally wait for a response - with data - in a single stored procedure? If client does not want to continue to wait, is there a way to use a procedure to check for the returned message later?
We have not used Service Broker before and are doing for a "sanity" check before proceeding. We do not want to tightly couple the two databases at this time.
View 4 Replies
View Related
Nov 12, 2007
In my SQLSERVER2005 EXPRESS
I Detached all databases and attached with new set of databases from SQL2005 Developer edition from different server.
Now My important SP response time increased from 00:00:00(before detaching old set of databases) to 00:00:08
How to improve query response time for SQLSERVER2005 EXPRESS
earlier it worked fine
Thanks
View 4 Replies
View Related
Mar 30, 2001
Why is the response time to run a query faster when the output is displayed in grid format as compared to text format?
View 1 Replies
View Related
Aug 10, 2007
Hello everyone,
I have three merge publications that use web synchronization. The first publication works with no problem. When I try and sync the second publication, I get the following error messages:
"The operation timed out"
"The Processing of the response message failed".
So, I upped the query timeout from 300 seconds to 900 seconds. Now I get the following error messages:
"The connection with the server was terminated abnormally"
"The Processing of the response message failed".
I am using the Synchronize applet (found in the Accessories menu) to test my publications.
The third publication also works with no problem, so I do not see why the second one fails.
The only difference between the three is the following:
The first replicates a small handful of UDF's
The second replicates all tables (and has some filtering applied)
The third replicates all stored procs, views, and remaining UDF's.
Any ideas?
Thanks...
View 1 Replies
View Related
